Hyper-V virtual machines may not start, and receive the error: Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on
I have used the Article ID: 2249906 to try and resove this error. It only started since I have created a dediacted SQL 2008 Server on the network. This is my attempt, so far using icacls:
icacls "C:\Users\Public\Documents\Hyper-V\Virtual hard disks\XYZ-SQL.vhd" /grant "NT VIRTUAL MACHINE
\13101CB0-271Z-4434-9736-E1DE331D316BZ":F
NT VIRTUAL MACHINE\13101CB0-271Z-4434-9736-E1DE331D316BZ: No mapping between account names and security
IDs was done.Successfully processed 0 files; Failed processing 1 files
Any ideas as this is becoming very disruptive to the network as the VM is a DC.
Many Thanks
Paul.B
From your description it sounds as if you have two VMs trying to use the exact same virtual disk. And this is not possible without using differencing disks in between. (it will give the error you describe when trying to power on the second).
Beyond that, I would have expected the configuraiton change to work. Another possibility is simply creating a new VM using the existing virutal disk. This is non-descructive as well and absolutely re-creates all of the VM objects and generates
new security identifiers.
If that does not work, then there is more to this puzzle than has been mentioned here and you will need to provide greater detail.
Brian Ehlert (hopefully you have found this useful) http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Similar Messages
-
Hyper V Error - Microsoft Emulated IDE Controller
Hi
in a new server (W2008 R2) - HP Proliant ML 350 G5 I can't start any virtual machines. When I try to start one virtual machine I see an error about Microsoft Emulated IDE Controller if virtual machine has an vhd attached, but is the virtual machine hasn't
vhd the error is different: Microsoft Synthetic SCSI Controller Insufficient Memory.
I've reinstalled HyperV role, but I'm in the same state
Any ideas?
ThanksCorrect, you created virtual machines, you just haven't installed an OS into them yet. Even though it has no OS it will still use whatever memory you tell it to from the get go. So, how much memory is configured in your VM settings?
See this screen shot for what i am talking about. Can you post a screenshot for your setup as well? -
Web dispatcher not starting and getting the error
Hi everybody.i got this error when i am trying to start web dipatcher. how can i over come this?
SAP Network Interface Router, Version 39.1 (SP3)
command line arg 0: ./saprouter
command line arg 1: -r
command line arg 2: -K
command line arg 3: p:CN=SGBWEP00, OU=0000709450, OU=SAProuter, O=SAP, C=DE
SncInit(): Initializing Secure Network Communication (SNC)
IBM RS/6000 with AIX (st,ascii,SAP_UC/size_t/void* = 8/64/64)
SncInit(): Trying builtin default as a
gssapi library name: "sncgss.o".
ERROR => DlLoadLib: dlopen()= 0509-022 Cannot load module .
0509-026 System error: A file or directory in the path name does not exist. -> DLENOACCESS (2,No such file or directory) [dlux.c 314]
ERROR => SncPDLInit(): DlLoadLib("sncgss.o")=DLENOACCESS
[sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss.o not loaded
[sncxxdl.0604]<<- SncInit()==SNCERR_INIT
sec_avail = "false"
ERROR => NiSncInit: SncInit failed (rc=-1) [nisnc.c 653]
ERROR => main: NiSncInit failed (rc=-17) [nirout.cpp 1349]
ERROR SNC processing failed:
SncInit
TIME Mon Feb 23 11:21:41 2009
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -17
MODULE nisnc.c
LINE 652
DETAIL NiSncInit: sncrc=-1
COUNTER 3
<<- ERROR: SncDone()==SNCERR_INIT_FIRST
thanksHello Nani,
It looks to be a SNC Issue.
just check wether you have the parameter snc/gssapi_lib define in ur profile of SAP system
This parameter should be set to the path of your gssapi32.dll file
Also u must also have a system variable defined SNC_LIB which is again to the path of gssapi32.dll
Also make sure that gssapi32.dll exists
Check these,ur web dispatcher might come up
Rohit -
Blade server is start but virtual machine is not started
i have a oracle virtual machine on blade server if any outage or planned activity is done the blade server is started automatically but virtual machines is not started
manually start the virtual machines any suggestions kindly share me.Hi user,
As long as youhave access to the linux sever from your windows server, you're good to go. Open your admin tool, go to File --> Open --> Offline.
The Open window pops up. On the "File Name" field, enter the path of rpd file in the linux server (Ex: \\Server_Name\local\MyRpd.rpd). Select the file, and voilà!
I hope this helps.
J. -
How to find out whether a program is running in Hyper-V virtual machine or not?
If I want to make a program which only running in Hyper-V virtual machine, how can I find out whether
the program is running in Hyper-V virtual machine or not?https://gallery.technet.microsoft.com/scriptcenter/Determine-if-a-computer-is-cdd20473
http://social.technet.microsoft.com/wiki/contents/articles/942.hyper-v-how-to-detect-if-a-computer-is-a-vm-using-script.aspx
http://www.grouppolicy.biz/2014/01/how-to-target-group-policy-to-virtual-computers/
Mike Crowley | MVP
My Blog --
Baseline Technologies -
i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!
That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.
-
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer.
Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
I tried to update my cc and received the error code: A12E1
I tried to update my cc and received the error code: A12E1
Hi Samson,
Welcome to the Community!
Please perform the below steps:
1) Reboot the computer.
2) If error still persist, Rename the OOBE folder to OOBE OLD from
Mac: MAC HD/Library/Application Support/Adobe
Windows: C:\Program Files (x86)\Common Files\Adobe and
C:\Users\(UserName)\AppData\Local\Adobe
3) Download Creative cloud once again and try launching.
4) If you still faces an issue then Quit/End the AAM notifier process
Windows:
Press Ctrl Alt Delete
Start Task Manager
Click the 'processes' tab and check if you have AAMNotifier running
If so, click End Task
Mac:
Go to Spotlight (magnifying glass at top right on your screen)
Type Activity Monitor
Press Return to open Activity Monitor
Check in the Activity monitor for AAMNotifier
Quit that process if you find it
Thanks!
Ankit -
I need help with java on windowsXP after updating iTunes to the latest version. My java will not work and I get error message need java virtual machine to run applet window. Did not have this problem prior to the iTunes update.
Please help, ThanksIf your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Starting Virtual Machine will not start from hibernate mode.
Hi. I had a BSOD and upon rebooting my machine one of my virtual machines is stuck in "hibernate" mode and will not boot up.
I attempted to restore to previous versions of the vmc, but that did not work.
The error i receive is.
"Could not enable integration functions"
Retry or Continue.
Selecting "Continue" states "the operation failed. The virtual machine is not running"
Does anyone have any idea how to get a VPC up and running from this situation?
Thanks, TimHi Dear Bob Comer,
My Laptop Windows 7 Suddenly "Shutdown". When I start it, it goes in recovery, after more than 5 hours I will Forcefully restart from Button, and start Windows 7.
Problem-1: Butt all environments OK butt very slow on any action, click on my computer or opening of any application very slow.
Problem 2: When I Click on Windows Virtual PC after long time I have same problem like "Could not enable integration
functions", Message displayed "Retry" or "Continue" after clicking "Continue" Message Displayed
"Could not enable integration functions". I have Data in MS Virtual PC Drive "C" and "D".
I read your Solution: I'm trying following steps:-
1- Going to Setting of Windows Virtual PC and Unchecked "enable integration features at start up" and Close Status
"Shut down" from "hibernate" Then
Press OK.
2- Remove the file (.vsv) from is
in "C:\Users\[userid]\AppData\Local\Microsoft\Windows Virtual PC".
3- Restart the Laptop and which is very slow, Butt When on Click to OPEN Windows Virtual PC Which is also very slow Black Screen coming with Windows XP Starting Logo. After long time Message Displayed "A disk read error occurred" Press Ctrl+Alt+Del to restart.
Start up Logo of Windows XP "Press Normally" again after 28sec in loop.
Dear What I can Do for: 1- retreating Data from Windows Virtual PC Drives "C" and "D" ????
2- How can my Virtual Machine Working OK and Fine ? Open
Please Solve my Problem with Thanks
Best Regards and Wishes
Khamkha -
VisualRF not starting and showing communication error timeout
Problem:
VisualRf is not starting and shows connection timed out on the Airwave GUI.
If we look at the visualRF logs, from the location /var/log/visualrf/visualrf.log
we can see the below error in the log:
2015-06-14 11:53:29,461 WARN Inventory com.airwave.amp.RoleParserImpl Existing login cookie is null. Initialize amp login.
2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl Failed to initialize session cookie.
2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl prepareMethod
java.lang.Exception: Failed to login.
Diagnostics:
When we look at the below error,
java.lang.Exception: Failed to login.
We could see that VisualRF is trying to login to Airwave database and failing to login for whatever reason. When we look at the Airwave database for this visualRF user, we could see this below:
The highlighted username in Yellow is the visualRF, VisaulRF creates this username randomly and we could see that login_attempts for this user is 10 and Airwave disables the user after 10 attempts. Therefore that explains why is_enabled is 0.
This could happen for different reasons, when we restore the visualRF backup and backup has some issues or when we do a vrf bootstrap, to do a factory reset on visualRF or could be any other reason.
Solution
To resolve this issue, all we need to do is update the Airwave database to enable this user, as shown below:
[root@localhost mercury]# dbc "update users set is_enabled = 1 where username = 'AihmrH3MHQ';"
once done, VisualRF would start working normally.Got the screenshot, thanks. And hello again Rob
Follow-up:
2) Not sure that it matters, but what's the url you see in the BrowserLab UI after making the request? What path do you have defined as the Local Site Path in your site definition in DW?
3) How are you requesting the screenshots? From the BrowserLab panel inside DW?
4) Open up the BrowserLab panel in DW and see what the drop-down control is set to. If it doesn't say "Local" change it to Local and press the preview button and let me know what happens.
6) I want to make sure that none of the assets your page(s) need live outside the directory you've got within your DW site definition.
Thanks,
Mark -
Illustrator will not start and announces an error message 4294967253.
Hello
Illustrator dons'nt want to start and announces an error message 4294967253.
What is it?
What do i have to do?
Thanks
DelphineHi delphine dupont,
Please refer the thread: http://forums.adobe.com/thread/1119534 with similar issue. First uninstall the software and then run the cleaner tool.
Regards,
Romit Sinha -
Nested Hyper v virtual machine won't start
I have a development environment on Hyper-v i want to be able to develop windows phone apps for this i need a Hyper v installation on my dev environment so i installed Hyper-v.
But if i start debuging the virtual hyper v says : The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4 inch.administrator' because one of the Hyper-V components is not running (Virtual machine ID)
can anybody help me out on this one as it looks all good. If i try to start the hyper v machine within hyper v i get the same error.
thanks in advance.
Check my website http://kbworks.nl or follow me on
@KbWorks be sure to Check my
SharePoint-Specialist.nu for dutch information workers check
Wat Is microsoft SharePoint.nl for dutch readers who want to know what
microsoft office365 is.Hi Paul Keijzers KbWorks,
Additional, Windows Phone 8 Emulator runs as a virtual machine on Hyper-V, the virtualization technology for Windows 8. To run the emulator, your computer must meet the requirements
to run Hyper-V. Please refer the following article to realize more detail require about the WP emulator install requirement.
System requirements for the emulator for Windows Phone 8
https://msdn.microsoft.com/en-us/library/windows/apps/ff626524(v=vs.105).aspx
How to enable Hyper-V for the emulator for Windows Phone 8
https://msdn.microsoft.com/en-us/library/windows/apps/jj863509(v=vs.105).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hyper-V - virtual machines don't start automatically after power outage
Hi,
I have a HP server running Windows 2012 R2 + Hyper-V. On this server, four VM have Windows Server 2003 R2, and one VM has Windows 2012. After power outage, 1 2003 R2 VM and 1 2012 VM are started properly, but the other three machines aren't. I've started
it manually. All VM's have last version of Hyper-V integration tools installed, the option "Automatically start VM if it was running before the service was stopped" was chosen. I'm not very familiar with Hyper-V, so, I've investigated only Hyper-V-VMMS
event log. There are some recurring errors:
The Integration Services Setup Disk image could not be updated: The process cannot access the file because it is being used by another process. (0x80070020).
and
Failed to get the disk information.
But I think it isn't a clue.
How can I clarify, why these machines aren't started automatically?Hi EugenBerend,
Maybe it is related to system resources allocation during the start up .
I would suggest you to configure a startup delay for those lower priority machines so that system
can locate enough resource for them.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Restricting the user to access only one view in or database
A user wants to create a database link , so that he can view one of our views. We want to restrict permission, so that he can access only that view, and not any of our tables. What is the best way to proceed? Thanks in advance, Gayatri
-
I have set up a @me mail account on my iPhone 4s and it downloads messages from both my regular email address and my iCloud email address. When I try to turn this on on my iPad it wants me to create a new account. I thought it was all supposed to wor
-
Smart Dialing option not showing in my BB Q10
Hi, I purchased BB Q10. In my phone "Smart Dialing" Option not coming when i go to setting. Kindly help me at the earliest.
-
Bug that allows match to use cellular data even when turned off in settings?
Earlier today, I mysteriously incurred overage charges on my phone bill because 200MB of data was used while I was on my bicycle. My phone was in my bag. Before I left, I had tried to download an album to my phone from iTunes match cloud storage. It
-
Firstly Release strategy for PO is configured. Now they are asking for new release codes to be added to the old ones. The issue is when i am configuring this old PO's no probelm as they are released. new PO's no problem. The issue is with OPEN PO'S .