I erased my ipod and it has stayed on the loading screen. Why?

please help

You'll want to connect your iPod Touch to your iTunes library in recovery mode and restore it using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

Similar Messages

  • When i try to turn ipod touch on it stays on the black screen with the apple and nothing else happens. whats wrong?

    okay so just as i was typing this the problem resolved itself, but when i went to charge my ipod i noticed ot stayed on the black screen with the apple for a good 10 minutes, so i pressed buttons furiously (!!) and the screen went white and then back on to the screen with apple again. this contiinued for a good 4 tries then eventually went on to my lock screen (which is the very beautiful dom howard not that you know who that is and i dont even know any of you so i dont know why im typing all of this out but i really enjoy typing it's an incredibly exciting past time of mine but unfortunately i havent used capital letters) just wondering if it will happen again

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Why does my ipod stay on  the loading screen ipod 4g

    my ipod touch  is a 4G and it stays on the loading screen. It's bin a day that it is doing that and its wierd do you have any tips to help me wiht this bug please help me please or can you do some thing
    if you responde please reponde to  [email protected]

    Try here:
    iOS: Not responding or does not turn on

  • HT4528 my iphone 4 shut off and wont turn back on so i had to go to restore it and it wont reload or anything just stays on the loading screen and does nothing?

    my iphone 4 shut off and wont turn back on so i had to go to restore it and it wont reload or anything just stays on the loading screen and does nothing?

    Hi marissacav,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    - Judy

  • I restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?

    i restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?

    You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808

  • I had my ipod touch 4th generation plugged into my sterio and i tried to swipe open my pinger app and now its stuck on the load screen for the app and wont do anything at all its frozen. How do I fix it??

    I had my ipod touch 4th generation plugged into my sterio and i tried to swipe open my pinger app and now its stuck on the load screen for the app and wont do anything at all its frozen. How do I fix it??

    Reset your iPod. Hold the power and the home button for 10 seconds till the iPod restarts. No data will be lost.

  • I updated an app on my iPhone 4 and it has went onto the loading icon but has stalled, the phone works fine but I can't download anymore apps help?

    I updated an app on my iPhone 4 and it has went onto the loading icon but has stalled. The phone works fine but i cant download anymore! Anyone had this before

    The app store has been down at times throughout the day today.
    Just be patient and wait it out.

  • I'm trying to set up my iphone 5s and it has been on the apple screen for hours with no improvement

    I'm trying to set up my iphone 5s and it has been on the apple screen for hours with no improvement
    I don't know  how to restart it...I've tried everything and it won't move away from this screen.  It's been plugged into my computer for a while now, and still does nothing.

    You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808

  • My MacBook Will Power up but stays at the loading screen.

    My MacBook will start up but stay at the loading screen with the apple logo for ever and wont go to the log in screen? why is this happening

    why is this happening?
    The disk may need repairing.
    Use Lion Recovery

  • I thought i lost my iPhone so i went on iCloud and erased it, so now after it erased it went to shut down and is staying on the loading screen like its trying to shut off

    its frozen on the loading screen to turn off

    Hey there tblemings,
    It sounds like your iPhone seems to be stuck on the Apple logo screen. I would try resetting the device with this process:
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From: Turn your iOS device off and on (restart) and reset
              http://support.apple.com/kb/ht1430
    If resetting doesnt work, then I would try putting the phone in recovery mode with this article and restore it with iTunes:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • IPhone 5 randomly shuts off and it is stuck at the loading screen with codes popping up

    My friend's iPhone randomly shuts down today and the loading screen with the apple logo came on with some codes. I tried restarting it manually but the same thing keeps happening. The codes start with [nand] and mention something about blocks. What could be the problem?

    Could be a hardware fault. It may need to be replaced.
    Have you tried restoring it?
    ~Lyssa

  • My  ipod after charging and disconnecting it stayed on the eject screen,...then it went to the apple screen and is clicking... it will not play

    I charged my Ipod 8gb yesterday and after disconnecting it was frozen onthe Ejecting screen... afterletting it run out of battery I now see the apple on the screen and it has a clicking noise that it hasnever had before

    Good Morning shann112577,
    Try the suggestions below if your iPhone will not turn on:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    http://support.apple.com/en-us/HT201412
    Regards,
    Judy

  • My macbook was runnig slow so i turned it off using the power button i then tryed to turn it back on and it turns on stays at the load screen with the apple with the loading sign spinning and a bar under that then my mac (late 08) turns off help please

    Help please

    Reinstall OS X using one of the following. The first is for Snow Leopard and the later for Lion/Mountain Lion.
    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My ipod keeps staying at the loading screen.

    When i turn on my ipod it sstays on the screen of the apple sign, some times when the batttery life is dried it turns off, if i turn it back on it jsut stays on that screen again, what can i do to fix this?

    Go to this page: http://www.ifans.com/forums/threads/how-to-force-ipod-ipad-or-iphone-into-restor e-mode.2790/

  • My mac stays on the loading screen and when I boot into safe mode it loads the background but no icons

    My mac was working fine the other day and I started it up today and it loaded to a blue screen so I restarted it and went to safe mode and it loaded up with the background and mouse but no icons. Could I please have any help thanks.

    Just to confirm, your iMac is a "G5" (not Intel), and THIS is the procedure you used to reset the SMU
    http://support.apple.com/kb/HT1767
    and not the procedure for Intel iMacs.
    If you have the iMac connected to an old (or overcrowded) power strip, try connecting it directly to a wall outlet by itself.  Make sure no other cables (other than the power cord) are connected.

Maybe you are looking for

  • Webcam NX Pro with windows vista

    I just bought a new comp with vista on it and can't seem to find drivers anywhere to get my nx pro to work with vista. I get an error message that says "CTPCam.exe has stopped working" and it can't find a solution. Does anyone know ANY way to make th

  • T400 Windows 7 64bit Can't Find Printer Driver

    Hi all, Perhaps someone can  help with this puzzling problem. Just bought the T400 w/Win 7 64 bit from the Lenovo website. It is great except one thing. I have a Win2k T22 ThinkPad on the network with a parallel port HP laserjet 6L and a USB port HP

  • Paging Problem in JSP using request.

    Dear Friends, I have an issue in JSP paging using request. In my action servelet my code is set as follows. request.setAttribute("clients", clients); In JSP I have <%ClientDataBean[] clients = (ClientDataBean[]) request.getAttribute("clients"); If I

  • How to use a function module in a subroutine

    Hi,   I am working on a report where i have to create list boxes for 5 fields.Instead of using the function module VRM_SET_VALUES for each field can i use subroutine? If so, can anyone tell me the procedure for that?Its very urgent. Thanks and Regard

  • TCPDump with multiple interfaces

    Hi, I'm wondering if its possible to use TCPDump to capture traffic (to a file) from all interfaces on a server simulteanously under Solaris 10? From the TCPDump man pages, this seems to be possible under Linux by specifying "-i any" but this doesn't