I made an error in the book I uploaded.

I made an error in the book I uploaded 12 hours ago. Can I correct the error in the uploaded copy or re-upload the book without buying it again?

No - you have 90 minutes to cancel an order - then it is moved into the production status and can not be modified
in the future
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Similar Messages

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

HT201272 Download a book again to fix an error in the book

I tried to re-download a book I purchased on my iPad but the button says 'downloaded' and wont allow me to download again. I clicked the 'report a problem' link on my receipt but I keep getting the message cannot log into iTunes store. Help

Contact the iTunes Store customer support department through the form on their web page and explain the problem to them.
Or contact the record label so that they can work through their account with the iTunes Store.

HT1879 How can I get a refund on purchases made in error in the itunes store?

My kids purchased and downloaded music from the itunes store that i was not aware of nor wanted til it wouldnt let me download anything else from itunes or any apps. How can I get refunded for these downloads?

You can try contacting iTunes support via this page and see what they say : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have recently replaced my iphone 4s front screen and made an error with the logic board. Is this fixable? picture will be linked

Here is the picture of the logic board with the piece that has been broken off highlighted in yellow.
https://plus.google.com/photos/118184697040837060146/albums/5873105616394112433
Is this fixable some where? Or am i s%!t out of luck?

If something has broken off the logic board, you'll need to get a new logic board.

On the initial installation I made an error. Now for Wi-fi network it shows my password. How do I correct

I have a new iPod Touch. I've made an error on the inital install, Whenever I try to open Wi-Fi my ID comes up as my network. I've tried a reset but to no avail.

Reset network settings: Settings>General>Reset>Reset Network Settings

Changes made in Book Module do not "stick" when the book has been duplicated

Lr 5.2 stand-alone version (not CC) – Win 7 64-bit
I had made a duplicate of the book (right-click the book Collection and select <Duplicate>). Then I made changes to the original book – changed the font for captions and for body; changed the wording of the body text; changed the padding for images. At some point in the process these changes did not '”stick” anymore. The changes were visible as long as I worked in the Book Module. But the changes were gone and the book reverted to the previous state as soon as I went to the Library and back to the Book Module. Same thing happened when I closed Lr and re-opened it.
Replacing the Preference File did not change this behavior. But when I deleted the duplicate book the behavior of Lr went back to “normal”, i.e. the changes now “stick”.
In my opinion there must be a bug that prevents that changes “stick” when after a Duplicate of a book has been created.

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

When i changed the names of my books in iTunes, it did not changed in the iPad after i had synced it again with the changes. can anyone help? i had added authors to the author column and deleted their names from the book titles.

i had added books to iBooks on iTunes and synced with my iPad mini. Then I realised that the titles sometimes had the author name, or a random number before it. I made changes to all the books in my iTunes library, edited the titles, added authors to the author columns, year in year column etc and synced my iPad again. but my iPad did not update these changes at all is still in the old way. can this be rectified?

Have you tried closing the iTunes store app via the multitasking bar and seeing if it works when you re-open it
Have you tried closing the app via the taskbar ? (I assume that your iPad is on iOS 6, though the version that your tagline shows, 6.1.6, is not a version for iPads) From the home screen (i.e. not with iTunes store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iTunes app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How to add a title to the book cover/spine?

Hi,
appears to be a stupid question, but I couldn't find any answer in the Videos by JK o any other help page:
How can I add a title to he book cover and the spine of a blurb-book made in LR5?
I could not find any cover template having a title (only a lot of text).
Thanks a lot in advance,
schleifi

I have worked with Booksmart and made one book successfully. I have also made a book in Lr 5.2 and had it printed by Blurb to my satisfaction.
Compared to creating a book in Lr the workflow in Booksmart is cumbersome and slow.
(1) During the creation of a book in Lr I test the book often by exporting it as a PDF. This option is only available when you select PDF instead of Blurb - but it is possible to switch between PDF and Blurb without harm. The only change is that the Blurb logo page disappears when PDF is selected. Viewing the PDF in Acrobat tells me what the book will look like in print since my monitor is calibrated and set to the correct intensity (brightness). It also tells me if my sharpening is good. For the export to PDF I select 100 for quality; color profile sRGB; file resolution 300; sharpening High; media type glossy.
A Blurb representative told me that these settings come close to the settings that Lr uses when the book is uploaded to Blurb.
In Booksmart I can't export to PDF.
BTW you should sharpen the image so much that it looks a bit too sharp in your PDF. When the boook is printed the ink droplets spread out a tiny bit before they dry. This tends to make the print softer than it looks on screen.
(2) Booksmart is not color managed. Therefore in Booksmart you have no feedback how your book will look in print. If you want to test your images you have to softproof them in Photoshop.
(3) When I make a book I find often that my develop adjustments are not optimal. In Lr it is very easy to switch the the Develop Module, make the necessary adjustments and switch back to the Book Module. With Booksmart you have to export the adjusted image again - or it has to be re-published if you use the Blurb plug-in.
(4) In the past I have made complaints that Lr does not give enough flexibility for the layout. Since then I have worked more in Lr and I find the Book Module actually quite good.
I find that the full page bleed allows the most flexibility for creating my own layout. Starting with a full page bleed I use the padding feature to place the image anywhere on the page and in any size I want. The boxes for "Page Text" and "Photo Text" allow for more than one column. The text can be edited by adjusting Tracking (all letters are spaced wider/closer), Kerning (individual pairs of letters can be spaced), Baseline (letters can be pushed up or down), or Leading (the distance between different lines of text can be adjusted). There are no such features in Booksmart.
(5) Selecting a color for page background or for text is cumbersome in Booksmart. In Lr it's easy.
The cover of my first book in Lr looks like this:

Error in the service orden

Hi Gurus.
I have a error in the service orden, the error say (Pricing data for partner
5000008 could not be read) and the information say:
Diagnosis
The attempt to read the pricing data for the current, valid business partner from the
customer master was unsuccessful.
The access was carried out with sales organization 'O 50000001', distribution channel 'SE' and division ''
If you have maintained a sales area conversion in R/3 that must be loaded per download
into the CRM System (tables SMOTVTA and SMOTVKOS), this sales area is converted before the actual access.
System Response
The document is incorrect until the pricing data can be determined.
Procedure
The pricing view is probably missing for your business partner in the customer master.
Maintain this data. To do this, you can call up transaction BP for maintaining
the business partner. In the locator select your business partner and load
it by double-clicking. Choose the "sold-to party" role. Press the "sales area" button and
choose the sales area given above. Maintain the incorrect data in the billing data screen.
I have two division (OT and CO).
But, the error occurs when a customer has a divicion
If you place in the master customer a divicion the system generates a error and
if I only put the sales organization and channel distribution system gives no error.
The BP was uploaded of ERP
Somebody Know, What I can to do ?
Thanks...

Hi Juan.
It appears that the pricing Procedure is not getting determined in the service Order Transaction.
The reason could be 4 the combination of the 5 keys i.e. Sales organization, distribution channel, divison, customer Pricing Procedure and document Pricing procedure, it is not able to find the Prcing procedure.
Check the five keys and Maintain that setting in:
Customer Relationship Management-> Basic Functions -> Pricing -> Pricing in the Business Transaction -> Determine Pricing Procedures.
Eg.
Make two new entries here for,
Sales Org: O 50000001
Distibution Channel : SE
Division: OT
*Customer Pricing Procedure:
*Document Pricing Procedure:
Pricing Procedure: which ever u want.
Sales Org: O 50000001
Distibution Channel : SE
Division: CO or make it *
*Customer Pricing Procedure:
*Document Pricing Procedure:
Pricing Procedure: which ever u want.
*Check Customer Pricing Procedure, in the BP master of customer 5000008, In the role sold- to party, Sales Area Data tab, Choose ur sales Area, go to the billing tab and maintain/check the Customer Pricing Procedure there.
*Check document Pricing Procedure: In the Customizing of transaction type, choose category sales, at the third level check the Document Prircing Procedure in the Pricing Data block.
If no divison is gettiing determined, keep it blank.
Wish this helps.
Regards,
Shalini Chauhan

The binary you uploaded was invalid. Very unhelpful support complaint

I have finally made it to the "Add New Application" screen in the iTunes connect portal. 3 hours must have passed since I decided to submit my app to the itunes store.
Almost every step of the way here was painful and full of troubleshooting madness. Yet I followed each step carefully one by one, did everything that the guides told me to do to.
I've found that to submit your iphone app to the App store following instructions is not enough. Many times in my life I have had to go through Applications procedures, but I have never heard of a procedure where you follow each step but still run into problems.
So my problem is, I try to upload my file I get an error message:
The binary you uploaded was invalid. The signature was invalid, or it was not signed with an Apple submission certificate.
Question 1)
Am I supposed to be uploading a zip file or the .app file? When reading the step by step instructions it says to zip the file (Yet no explanation on what to do with the zipped file). When choosing which file to upload I can only upload the zip file. Their should be clear instructions pointing out exactly what type of file needs to be uploaded, and also additional notes explaning what I should do with the zipped file.
Question 2)
Earlier in the process I was required to enter a common name in the certificate. It says to enter the common name you entered when you signed up. I do not know where to find that common name exactly, and and I unsure where I can find that exact information. There should be instructions about where you can find your common name to avoid problems further down the process.
Question 3)
Under verifying distribution, Step number 2 it says:
"Search for the term “CodeSign” in the Build Log detail view - this will take you to the line in the build log that confirms your application was signed by your iPhone Certificate"
So it shows up in my log, but the instructions do not point out what to look at, and where the problem might be. It only tells you to search for the term CodeSign and leaves you off. Sure their is an image highlighting the required line. But it says nothing other than to look for the words CodeSign. What exactly am I looking at here?
I am doing my best to try and forgive these flaws found in the help section. What is it that I did wrong?
Message was edited by: Darpachief

Darpachief wrote:
So my problem is, I try to upload my file I get an error message:
The binary you uploaded was invalid. The signature was invalid, or it was not signed with an Apple submission certificate.
Most likely you got the binary signed with the wrong certificate. Or there's something else in your process that doesn't match exactly with what you entered at the Program Portal.
Question 1)
Am I supposed to be uploading a zip file or the .app file? When reading the step by step instructions it says to zip the file (Yet no explanation on what to do with the zipped file). When choosing which file to upload I can only upload the zip file.
You should upload the zip file. You're correct that it's not spelled out in the printed directions, but there's a video on how to prepare your app for the store and in it the presenter uploads the zip file. Being only able to choose the zip file is a sign that the correct file is the zip.
Question 2)
Earlier in the process I was required to enter a common name in the certificate. It says to enter the common name you entered when you signed up. I do not know where to find that common name exactly, and and I unsure where I can find that exact information. There should be instructions about where you can find your common name to avoid problems further down the process.
Remember when you generated and installed all the certificates from the Program Portal web site? You can get the names from there.
So it shows up in my log, but the instructions do not point out what to look at, and where the problem might be. It only tells you to search for the term CodeSign and leaves you off. Sure their is an image highlighting the required line. But it says nothing other than to look for the words CodeSign. What exactly am I looking at here?
Basically, by following those directions, you're looking to see if your code is signed and that it's signing the right binary (i.e., in the correct build folder). It's not telling you what you used to sign the binary, whether you used the development certificate or the distribution one.
What is it that I did wrong?
You have to generate a certificate and provisioning profile for your app for distribution. You can't use the same one you used for signing your app if you tested on your device. You need to have the certificates and provisioning profiles properly entered into your keychain and Xcode for this to all work. Perhaps you missed one? Make sure you've zipped and uploaded the correct binary, i.e., the distribution one and not a development one.
Also, you should make sure that the app identifier (com.companyname.appname) matches exactly with what you entered into the program portal, even down to the case (i.e., if it's "appname" on the portal make sure it's not "AppName" in Xcode).
I haven't uploaded anything to the App Store yet, but I've pretty much done everything else: Ad Hoc distribution to my iPod via iTunes on another computer running an older OS, run directly on the iPod, used Instruments to profile my code on the iPod. In every case, I ran into some kind of roadblock, but in going through it again, I also found that I skipped some step, or missed some setting, and once I corrected that, things worked as expected.
It's a complicated process, one that has a lot of steps, therefore a lot of places for a mistake or missed setting. So try going back through the process again just to make sure you haven't missed a step or gotten some setting wrong.
charlie
P.S. - If you want to send feedback on the documentation, ADC has a contact page.

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

How can I see the MAD results in my planning book

Hello Gurus:
I'm setting up some statistical models in APO DP and running some test data through them. How can I see the results of the MAD to verify if the models are calculating correctly? I was hoping I can see the monthly MAD values in a key figure in my planning book?
Does anyone know?
Andrea

Hello Andrea,
As far as I know, I don't think there's a standard key figure or macro could acheive this.
MAD or other errors in forecast are not saved as time series, so I don't know why you want to see them as time series.
You can see the forecast errors in forecast result screen, and if you push comparision button, you can see forecast errors for several last runs.
But I don't know how to put these value into planning book, unless you want to apply your own logic ...
Best Regards,
Ada

I just applied for an Account but they did not request my ISBN. I may have made an error in completing the information. How can I correct it?

I just applied for an Account but they did not request my ISBN. I may have made an error in completing the information. How can I correct it?

Did you just apply for an account or did you try to upload a book? If you are simply setting up an account, they won't ask you for an ISBN number. They will, however, ask for your tax ID number. After your account is activated, then any time you upload a new book, you will need to supply an ISBN number. Since each book has a unique ISBN, they don't need those numbers to initially set up your account. I hope that helps.
Good luck!
Kara

HT1645 I am trying to burn an imovie I made. I keep getting the message multiplex error. The imovie will not burn to a idvd.

I am trying to burn an imovie to a DVD. I keep getting the message multiplex error. I do not know what to do. Please, can anyone help me.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

I made an error in the book I uploaded.

Similar Messages

Maybe you are looking for