ICal won't take data. Data disappeared from iCal

iCal won't take data. All events disappeared from iCal. Help!

I have the same issue.  Recently upgraded to iTunes 11 and now have the problem. 

Similar Messages

  • Data Disappears from Line Chart in Preview Mode

    Help! Line chart data present in design mode, but disappears when in preview mode.  I have a dashboard that I update monthly.  Simple line charts.  Now, the line chart data is visible while in the design view, but does not show up when in the preview view or even when converting it to a PDF or Powerpoint.  SWF issue?  Inputs are needed!
    Thanks,
    Stan

    Hi Stan,
    The answer to, why the data disappears in runtime mode, depends on how you retrieve the data in your dashboard.
    It seems that you have some sample static data in your spreadsheet that shown in design mode. But chances are that this data is set to be overwritten in runtime mode, if you import your data using QAAWS, Live Office or similar.
    I would suggest you to add a "spreadsheet table" component (found in the bottom of the Selectors category in the components browser) to your dashboard. Set the spreadsheet table to display some of the cells in the spreadsheet that you expect to get populated during runtime.
    In this way you can verify if data is actually present in the relevant cells during runtime.
    By the way - this is also a best practice method to test data-retrieval in Xcelsius.
    I hope this helps.
    Kind Regards,
    Simon

  • Data disappeared from iCloud. 18GB worth.

    I recieved a notice that my complimentary iCloud space would expire on October 1, so I went ahead and purchased the space I would need. I got an email today (10/1) Telling me that my 25 gb plan went down to a 5gb free plan even though I already paid. On my computers and iPhone, it still shows 25gb available with only 1.2GB in use. I had about 18GB of backups and photos/documents that are now just gone. I went in to double check if I had purchased the extra space, and indeed I did purchase it. Where did all my data disappear to? Can I trust iCloud to safely keep my data? I lost some pages documents and my iphone backup.

    i have the same problem. paid in August (!)..
    today i have got this message:
    "Your iCloud storage has been automatically adjusted to the free 5 GB plan. You are currently using 5 GB of storage."

  • IPod won't take 1.2 update from iTunes 7

    Hoping someone can help. Upgraded to iTunes 7 but iPod won't take the 1.2 update. When the prompt comes up, I select install and it looks on my computer monitor like it's working, but in about 2 seconds the "Do Not Disconnect" logo on my iPod goes away, despite the fact that the computer is, in theory, trying to update the iPod. Eventually, it tires out and I've gotten the can't update error -50 message. Does the same thing when I try to Restore. Have reset, uninstalled iTunes twice, reinstalled and also reinstalled original iPod disc. Tried most everything on iPod support page.
    Help? Also am seeing very little album artwork which I'm assuming is related.
    iPod 5th Gen   Windows XP Pro  

    (1) next time you connect your ipod, decline to update and put enable disk mode. Then apply the update.
    (2) If that does not work, attach the ipod, format the drive, start itunes, restore & update.
    be warned:
    Method 2 will erase out your ipod and require taht you reload all the music from your pc to the ipod.
    I ended up doing (1) with a nano and (2) with a 3G

  • Airport Express won't join network and disappears from view once configured

    Hi. I am having trouble getting my brand new Airport Express to connect to my network. I would appreciate any help you can provide. Here are the details:
    Computer: iMac, G5 running OS X Tiger.
    Network: Cable modem hooked to a netgear wireless b/g router. The router is configured to use WEP 128 bit encryption. I have connectivity on the router throughout the house on several computers and handheld devices (iPhone, etc).
    Airport Express Version: 5.3.1
    My goal is to add the AE to my current network in order to stream music from iTunes to my receiver.
    When I initially opened up the airtunes utility to set up the AE the setup program was able to find the AE and walk through the configuration process. I followed the steps, entered the correct network name, encryption algorithm, password, etc. When I completed setup and hit the update AE button the AE disappeared from the setup application and the device began to flash yellow. While troubleshooting I have reset the AE dozens of times over the past couple of days. I have done both the reset with power on (press reset for 10 seconds waiting for the quickflash) and the hard reset (plugging the AE in with the reset button depressed until the quickflash starts). In either case, the AE is rarely detected by the setup utility (about 1 in 10 times). When it is detected, I walk through the set up and get the same results. I have attempted configuration using both the manual configuration option and the automatic "wizard-like" method.
    I have tried to configure the AE wirelessly with it plugged in next to the computer and using a direct hookup via ethernet cable. Both methods produce the same results - flashing yellow light with AE undetectable by any Airport applications.
    I have also tried to load an older version of the firmware (5.3) on the AE. When I hit the update AE button after configuring the update to go from the current version to version 5.3 I get an error message stating that "an error occured while attempting to update."
    Thanks in advance for any help you can provide.

    Hi guys,
    I think I'm having the same problem as you all, and its driving me crazzzzy!. I added an AX to my existing network with a AEX all thru gigabyte switch, including the new AX. I set the brand new AX up with all the settings, hit update, all settings were configured and its working fine (i can see it in iTunes, stream music to it, all works fine) EXCEPT when i go to AU and try to go into the manual setting of the AX it just hangs, and after about 2 min, i get an error message:
    "An error occurred while reading the configuration. Please make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6722)"
    I have tried resetting it hard/soft/default but not sure if it really does reset it, still keeps same password, and network settings. Tried connecting it next to my existing AEX incase the AX is trying to communicate via WIFI instead of the hard wired ethernet. I'll try hard wiring it directly to my mac as some have had success.
    I have tried using OX 10.5.3, but still misbehaves as b4 with OSX.4.11. So its not my mac setup.
    I'll try to find the old firmwares as some have described, that might work....????
    This seems a common problem to many, I hope that Steve & the Apple engineers have got these messages and are fixing the problem as we speak.
    marc

  • Statistical data disappears from companies where LC does not equal GC

    Hi experts : )
    We have come across an issue which we cannot explain and I was hoping some you might have encountered it before and can help.
    We are entering statistical data for payroll and JV cash and debt for example. We recently changed a few companies local currency from EUR to GBP. Since the change whenever statistical data is entered in those companies the values entered disapear after a while. My guess is that it is happening whenever the data collection task is executed. But what is strange is that is it only happening to the non-euro companies.
    Any idea anybody what is causing this?
    Your help is very much appreciated.
    Regards,
    Tanja

    Thank you very much for your answers : )
    The change of currency did take place in period 1/2011 and the BCF was configured as mentioned by Dan. However, we decided against running balance carried forward task in the end for those companies as we had difficulies matching the local currency amounts as converted by the BCT and the local currecy amount coming in from the source system. Instead the opening balances were loaded, but it seems the statistical data was not.
    But then again... we already had GBP companies in period 12/2010, but their statistical data is disappearing also even though their BCF was run... Any ideas on this particular case?
    Kind regards,
    Tanja

  • User entered data disappears from view in fields after entry in Reader 9

    This is a repost. The form was recreated and same problem (see below) has occurred. The person who has created these forms is a basic user, and so is not changing any settings or doing any programming, just adding fill-in fields (text boxes) and check boxes, then distributing by email through Acrobat. The problem also occurs with other forms. I cannot find any information on this problem anywhere. Any new ideas? File is attached.
    A simple form with basic text boxes is created in LiveCycle ES and distributed with Acrobat Pro 9. All users have been upgraded to Acrobat Reader 9. But when the user fills in the form in Reader, the text disappears when they tab or enter into the next field. Check boxes are fine. The user also does not see the data when printing. But, after submission, the data can be seen and printed from Acrobat Pro 9 by the original sender.

    This form image was created using a Toshiba MFP and had form fields added with Acrobat. There appears to be a font problem. I saved the form in Acrobat Pro Extended 9. When I opened the form in Reader 9 I was asked to install Japanese fonts since the form uses the KozMinPrN6-Regular font.
    After dismissing the install request, the form fields behaved predictibly in Reader 9 (with the exception of requesting 10MB of Japanese fonts).
    Steve

  • Why does the data disappear from my form fields when my form is sent over to client ?

    Hi all,
    I don't know if this is just happening a few times or ALL the time unfortunately:( I normally send over estimates (as regular pdfs) with some filled out Acrobat forms that make up part of the estimate (these include terms of agreement, project details, etc.). Now, before I send out the pdfs I password protect the entire pdf so that nothing can be changed, but that the pdf can be printed at high quality.
    Well, what is happening when my client opens up the pdf (usually on a Windows machine) is that NOTHING APPEARS in all of the form fields where I had input and saved the data! Yet when I open up the form on my Mac in Acrobat, or Reader or Preview, all looks just fine. Any idea why this is happening and what I could do to prevent it from happening in the future? I am using Acrobat X.
    Thank you kindly,
    Christine

    Hi Gilad,
    I never use Preview and did not use Preview at all before sending the document over to my most recent client either.
    I only opened Preview up this morning after I discovered that all of the form data had disappeared on his end! And the only reason I opened up Preview was because I already knew it looked fine in Acrobat so wanted so wanted to view the form in a different application.
    My client would not even have notified me about it had he not sent the signed form back to me and I saw there was no data there! I then called him and asked him about the missing data and he said that he thought I had simply sent over the form purposely with blank fields:(
    I have just emailed him to ask him what application he opened it up in. My understanding is that he is on Windows because ne mentioned to me his company was using Windows when we last spoke. Perhaps he has a personal Macbook where he opened it? I just don't know and can hopefully soon find out:)
    But THANK YOU for letting me know about that script! I appreciate it:) I have now downloaded and installed it and will just have to use it on ALL of my forms before sending them out:)

  • Migration Assistant Won't Restore Data, Mavericks, from 10.8

    This is f---ed up!  I hope I can find an answer here...
    I am trying to do one of the most basic things:  Restore data, apps and settings from a USB Mountain Lion Time Machine backup to my new Mavericks based machine.
    Migration assistant sees the disc fine, will let me get to the "restore" screen where there are 3 check boxes for restoring data, settings and apps from a time machine backup.
    Unforutnately, it doesn't work.  It says I have about 400k worth of data, settings, and apps to restore, but this is absolutely wrong.  I've got about 800GB of stuff to restore, and appearently Migration Assistant doesn't see 99.9999% of it.
    Any idea what's wrong here?
    I did encrypt the home folder on my old machine, but NOT the time machine backup because I didn't want this problem!  (It happened anyway).
    Any help is greatly appreciated!

    MA doesn't work fine!  It didn't restore any of my apps, none of my data, and I am not sure what settings it set, but nothing I noticed right away.
    I DID use the setup assistant at boot, same deal!
    Contacting Apple Support is usually a pain, and takes too long.  If they can't fix it on the phone (which is usually the case when I call), they want a genius to look at it, and that involves taking the machine down to the apple store.
    By the time I have done all that, I can just re-load things myself.
    No worries, I just restored my e-mail and browser settings.  Those are the biggest things, and I can pull contacts etc off my iPhone.
    I just wish the thing had restored like it is SUPPOSED to.
    Anyway, thanks for the reply!  =)

  • Data disappeared from guest user

    I put a video and photos on the 'guest user' account on my macbook air, and when I went to log in the next day, all the data was gone. Is there a way to recover that data? It's not in the trash. Also, why did it disappear?

    Welcome to the Apple Support Communities
    You should know that the data you store on the Guest user is temporary, because when you log out of the Guest user, the data stored there is deleted. It's not a bug, it's a feature present in a lot of UNIX-based systems, because the Guest user is prepared for people who doesn't use the computer

  • Can we do input field readonly and it will takes data only from F4

    Hi  experts,
    I want user only fill data in inputfield by F4, not manualy , can we do somwthing for that.
    Thanks & Regards
    Prashant Gupta

    Hi Prashanth,
       We can handle your requirement. I will give one example and it is working.   
        Address -  Node
         Firtst_Name-    Node  attribute    and this attribute will have DDIC search help.
       Create Input field 'FIRSTNAME' for this attribute in screen with transparent container  'TC' and bind the above context to the UI element.  Now this UI element is Context is 'ADDRESS.FIRSTNAME'.
    Now add the below code in MODIFYVIEW hook method.The below code will add search help with read only input field but for display mode again you have to disable the search help for this field. i have not written code for that.
      DATA: lo_first_name       TYPE REF TO cl_wd_input_field,
            lo_first_name_new   TYPE REF TO cl_wd_input_field,         " New input field
            lo_transp_cont      TYPE REF TO cl_wd_transparent_container. " TC container
            lo_new_container    TYPE REF TO cl_wd_transparent_container.
      DATA: lv_bound_value      TYPE string,
            lv_read_only        TYPE wdy_boolean.
       IF iv_first_time EQ abap_true.
    lo_first_name_input ?= io_view->get_element( id = 'FIRST_NAME' ).
    lo_first_name_input->set_width( '0' ).
    lv_bound_value = lo_first_name_input->bound_value( ).  "ADDRESS.FIRST_NAME"
        Create new dynamic Input Field
          CALL METHOD cl_wd_input_field=>new_input_field
            EXPORTING
              bind_value = lv_bound_value     
              id         = 'FIRST_NAME_NEW'
              read_only  = abap_true
              view       = io_view
            RECEIVING
              control    = lo_first_name_new.
        Create new dynamic Transparent Container
          CALL METHOD cl_wd_transparent_container=>new_transparent_container
            EXPORTING
              id      = 'TC_NEW'    " New container
              view    = io_view
            RECEIVING
              control = lo_new_container.
          " I used flow layout thats why i am using the flow layout
          cl_wd_flow_layout=>new_flow_layout( container = lo_new_container ).
          cl_wd_matrix_data=>new_matrix_data( element = lo_new_container ).
      " Get old field container
       lo_transp_cont ?= io_view->get_element( id = 'TC' ). 
       IF NOT lo_transp_cont IS INITIAL.
        "Using a new Transparent Container both Fields for FIRST_NAME are shown as only one Field
            cl_wd_flow_data=>new_flow_data( element     = lo_first_name_new ).
            lo_new_container->add_child( the_child = lo_first_name_new ).
            " remove the child means old FIRT_NAME
            lo_first_name ?= lo_transp_cont->remove_child( id = 'FIRST_NAME' ).
            cl_wd_flow_data=>new_flow_data( element = lo_first_name ).
            lo_new_container->add_child( the_child = lo_first_name ).
          lo_transp_cont->add_child( index      = 2
                                     the_child  = lo_new_container ).
       ENDIF.
    endif.
    Regards,
    Devi

  • Why won't the guest account disappear from the logon window

    evn if i disable it in system preferences, it still wont leave

    Because you have Find My Mac enabled.

  • Pedometer data disappearing into the ether, not into Nike+

    Purchased a new iPod Nano yesterday. Got it home and connected it to my MacBook (running iTunes 9.0).
    It asked me if I wanted to sync the pedometer data to Nike+ and I clicked on Yes.
    It didn't ask me to create a Nike+ account so, having never created a Nike+ account or used the service, I imagined that I could log in with my Apple ID - the same one I used to register my iPod Nano.
    When I visit the Nike+ web site by clicking the link in iTunes it takes me to a page where I have to choose my Country.
    Whenever I connect my iPod Nano it asks if I want to upload my pedometer data to Nike+, the data disappears from my iPod but where does it go?
    How do I tell iTunes which Nike+ account to use? OR, how do I tell Nike+ which iTunes account to use?
    Any help would be appreciated.

    Weird thing is that now when I go into iTunes, and click the Nike + iPod, it shows my Nike account (same as my iTunes one) and syncs up the data. It shows my Login ID under the 'Automatically send workout data to Nike+.
    The button (Visit Nike +) now takes me to the correct web page and shows my progress.
    I am 20% up the 100 story building.
    I think I need a few more days of activity to see what the site can do. It is a really interesting idea.
    I do not know if I sync mid-day, will those steps go to Nike and a sync later that day add the additional steps?
    Also, It seems to easy to delete steps from the Nano. I accidentily delete al my steps from 9/11.
    Now I need to make sure that teh steps the Nano is capturing or pretty close. It seems to go into pause and not track steps once I leave the Pedometer memnu?

  • CATW data disappear. Anyone can help please?

    Dear all,
    I actually use the standard CATW for the employee to record their overtime. It works fine until last Friday the check entries button in the portal seem like does not work.
    The scenario is where after the employee key in the overtime in the time sheet, they will have to click on the check entries button before saving it. Now the problem is after the employee click on check entries and save the data, the data disappear from the timesheet and no workflow trigger for the employee’s manager to approve the OT.
    Anyone got ideas about this problem?
    Thanks
    Regards,
    Bryan

    I don't think this has anything to do with the java version because Oracle 8.1.6 comes with jre 1.1.8. I believe that the install process sets up its CLASSPATH to use only those jars which come with the distribution.
    Read the other posts on this bboard about installing Oracle on a RedHat 7 platform

  • All my GPS data disappeared

    This is something that happened twice.
    Suddenly, all my GPS data disappeared from the entire catalog.
    Fortunately, I could recover them from my catalog backup.
    I can't make out how this could have happened.
    Did anyone experience the same problem ?

    There are two cases
    Case 1 : This happened under LR 5 or even LR 4 a couple of weeks or even months ago. The GPS data got erased everywhere and could not be recovered.
    Case 2 : This happened under LR CC. I was lucky to be aware of that problem because shortly after this loss I tried to find photos for a specific location. But there was no GPS data available. By reloading the apparently uncorrupted catalog everything was fine again.
    What I think happened
    Since all GPS data for the entire catalog disappeared in one instant, I think that the problem lies in my catalog. There must be a file containing a link from the photos the GPS date (or the other way round). I think that link got corrupted or was erased.
    In case 1 unaware of this loss I browsed and accessed the photos thereby gradually erasing the GPS data in the photos until none was left.
    In case 2, since this is an unforeseen event for LR, the GPS data in the photos were not immediately erased. And I did not access the photos. By reloading an uncorrupted catalog everything was fine again.
    Unfortunately I cannot trace what event caused the catalog to get corrupted. All I know is that I was creating and deleting collections.
    Believe me, I now constantly check the presence of GPS data via the metadata filter "GPS data".
    Does this make any sense to you ?

Maybe you are looking for