IMovie Applying Effects
Hi all,
When i apply effects to clips, for example saturation, it applies it no problem, however as it gets towards the end of the clip it fades back to being 'uneffected' and then starts again on the next clip.
I have applied the effects for the correct duration of the clip and yet this still happens.
Am i doing something wrong as its very annoying!?
Cheers!!!
Hi Jason - I have only a Histogram/Saturation effect which displays a histogram on the screen as an overlay. If Effect In and Effect Out are set to 00:00 then it should be applied throughout selected clips, without fades. Other effects I tested work the same.
Not sure why yours behave differently.
Similar Messages
-
Why can I only apply effects one or two times in the same project?
Anytime after that the clip just shakes and it doesn't apply.
please send email response to [email protected]thank you for the response
my project is 6 10min clips of video
by shaking i mean, when i push the apply button for the effect
the clip in the main window of imovie just shakes. in other words
like it is saying i can't carry out that command or something.
I applied a crop effect to two clips in the project by using a plugin
I downloaded from the internet and it worked, but attempts to use
it again on other clips in the same project failed many times.
by the way, do you know of the best place to find a crop plugin?
maybe the one that I downloaded is a demo and only works a couple
times. i need one i can use ulimited. -
Everything in iMovie HD 6 seems to work fine apart from not being able to apply effects. I've tried most of the effects. I have no problems changing settings. It even renders or looks like it's rendering but nothing changes with the clip. It's the same as it was before.
Can anyone help?same thing.
had my imac harddrive replaced and now the quartz composer effects dont work. I've been researching for the past 3 hours. Does anyone have the answer to this.
I'm led to believe it has to do with not having the latest codecs? or something is off with my quartz composer (tho i see it renderin in preview) or this is just a bug that no one has the answer to.
won't somebody help georgieporge and I? -
how does one go about creating imovie style effects in FCP
like aged film, or rain, or film look
do i need to buy third party filters?Graeme Nattress (www.nattress.com) has a very well regarded group of filters that will do "film look" as well as imitating aged film. Not sure what rain look is.
Or, edit your project in FCP, export a .dv file and run it through iMovie with whatever effect you'd like to apply.
x -
Help! Applying Effects to Titles
Hi there,
Why can't I successfully apply effects to titles (black background/white letters) without the title going bright white after rendering??? In preview mode everything looks great. I reopen file and try again, but it never works.
Any amount of advice would help this frustrated beginner. Thanks!!!!!!!!Matthew,
Thanks for the reply.
I have a iMac G5, and so far the following effects have had this problem: rain, fog, letterbox. I did however get letterbox to work in a previous project I worked on a few months ago. But can't get them to work since.
I'm using iMovie 5.0.2 (oops am I in the wrong discussion room?)
Greener -
Best practice regarding work flow (cutting, applying effects, exporting etc)
Hi!
I've been asked to shoot and edit a music video for a friend of mine, and I'm trying to figure out the best way to manage this project in PrE (in what order to do things and so on). I have a picture in my head which make sence, but I'd like to have it confirmed. If you've been following the "Very disappointed with Premiere Elements" thread, you know I'm not a fan of how the applying of effects works, when having a lot of cuts between scenes and clips etc. A few of the steps below is meant to make that process more effective.
So, here's my idea, from the begining and in detail:
1. Download the appropriate clips from the camera (in this case 1280x720, H.264 mov's from an EOS 500D).
2. Create a PrE-project for each clip and maybe trim the in and outs a bit, if needed.
3. Export each clip to uncompressed avi's.
4. Create the main project file and import all the uncompressed avi's.
5. Insert the clips in on appropriate tracks in the timeline.
6. Do all the cutting, triming and sync as complete as possible, without thinking about effects.
7. When finished, open up each of the smaller clip projects and add the desired effects. This will mainly include contrasts, color corrections, noise etc, in order to get the right look and feel to each clip/scene.
8. Again, export the clips to uncompressed avi's and overwrite the previous versions.
9. Open up the main project, which now should contain the clips with look-and-feel effects visible.
10. Add some additional effects if needed.
11. Export/share, and you're done.
Of course I will end up going back and forth through these steps anyway, but as a basic plan it seems reasonable. I see three main positive aspects:
1. The look-and-feel effects will be applied on the raw material, before the converting process. This should result in a slightly better quality. Perhaps not noticeable, but anyway.
2. The main project will be more CPU friendly and easier to work with.
3. If I want to tweek the look-and-feel effect to a clip/scene, I don't have to do it on every split (I will have a lot of splits, so applying and changing the effect parameters will be time consuming and ineffective). Of course, opening up the clip's specific project, changing the effect and then export to avi, will also take time, but point 1 and 2 makes up for that.
Have in mind that it is a music video project, to put things in the right context. We'll probably have a few parallel stories/scenes, with lots of cutting in and out between them. The timeline will probably look insane.
So, am I thinking in the right direction here? Any traps I might fall into along the way?
Regards
FredrikFredrik,
Though similar to your workflow, here is how I would do it.
Import those "raw" Clips into a Project, and do my Trimming in that Project, relying on the Source Monitor to establish the In & Out Points for each, and also using different Instances of any longer "master Clip.". I would also do my CC (Color Correction), and all density (Levels, etc.) Effects here. Do not Trim too closely, as you will want to make sure that you have adequate Handles to work with later on.
Use the WAB (Work Area Bar) to Export the material that I needed in "chunks," using either Lagarith Lossless CODEC, or UT Lossless CODEC *
Import my music into a new Project and listen over and over, making notes on what visuals (those Exported/Shared Clips from above) I have at my disposal. At this point, I would also be making notes as to some of the Effects that I felt went with the music, based on my knowledge of the available visuals.
Import my Exported/Shared, color graded Clips.
Assemble those Clips, and Trim even more.
Watch and listen carefully, going back to my notes.
Apply any additional Effects now.
Watch and listen carefully.
Tighten any edits, adjust any applied Effects, and perhaps add (or remove existing) more Effects.
Watch and listen carefully.
Output an "approval" AV for the band/client.
Tweak, as is necessary.
Output "final approval" AV.
Tweak, as is necessary.
Export/Share, to desired delivery formats.
Invoice the client.
Cash check.
Declare "wine-thirty."
This is very similar to your proposed workflow.
Good luck,
Hunt
* I have used Lagarith Lossless CODEC with my PrE 4.0, but have not tried UT. Both work fine in PrPro, so I assume that UT Lossless will work in PrE too. These CODEC's are fairly quick in processing/Exporting, and offer the benefit of smaller files, than Uncompressed AVI. They are visually lossless. The resultant files will NOT be tiny, so one would still need a good amount of HDD space. Neither CODEC introduces any artifacts, or color degredation. -
Why are my still images Blurry when applying effects?
I am creating a slideshow video using images with up to 18mp. The images look wonderful clear and sharp until I try and add video effects to the slide, like zooming in or panning.
I am a user of both CS5.5 at work and newly acquired CS6 for home. I like what I have been able to do, however this makes me very frustrated when everything looks good except for the images with effects. Should I be applying effects differently? or what?
Thanks,
G>Didn't mean to start an argument
= Little Devil with a Grin !!!
Stick around for awhile... there is OFTEN a good deal of "healthy discussion" (ie-disagreement) that goes on here
That discussion brings out a LOT of different experiences (you say X doesn't work... but it works just fine for "me") that sometimes, maybe even often, leads to increased and/or new knowledge for everyone
Other times, you just need to realize that what works for "me" may, or may not, work for "you" exactly the same way based on your work flow
Read what everyone offers, try what you can... and make LOTS of notes so, over time, you will develop work practices that work best for you
Personal example...
Many people export out of PPro as MPEG2-DVD to then use Encore to author a DVD
My PERSONAL work flow is to export my AVCHD edits to Widescreen DV AVI to give to Encore... so I may use Encore's Automatic Transcoding setting to make a "best" fit of video length to size (single or dual layer) of DVD
This is because I just don't care to get into all the details of figuring out the PPro settings when exporting... I let Encore do all the math for me
That process works just fine for me... other people want to figure out their own math for the PPro export settings
I say what I do, and why, but I certainly do not TELL anyone else that they MUST do it my way -
Audition 6 Crashen when previewing or applying effects
Hi
I recently installed the Creative Suite Master Collection CS6 Windows version of my new Retina MacBook pro (new 13" model) and I'm having a few problems with Audition. The main problem is that when applying effects (like a FFT filter or Stretch and pitch) Audition would crash when trying to either preview the effect or apply it.
One example is when trying to change the pitch of an audio file. Normally I use “Audition” as the algorithm rather than iZotope. Audition would crash when previewing the effect or when trying to add it. It doesn’t crash when using the iZotope algorithm. It also happens if I try to apply reverb effects too.
This Macbook Pro I’m using is running Windows 7 Pro x64 via Bootcamp. I don’t have a lot installed on it atm & both windows & the master collection are fully activated. I had an older Macbook that never had this problem before. I’ve also tried Audition from CS5.5 on Mac OS X & it doesn’t have this sort of problem.
These are the errors that show up acording to System info.
21/11/2013 11:37 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe38
Faulting application start time: 0x01cee7126c7bcb50
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: d7646e70-5305-11e3-b2ec-b8e8562f706d
21/11/2013 11:15 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x12b4
Faulting application start time: 0x01cee70f7f3697c8
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: cbcd68a9-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:12 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x4b8
Faulting application start time: 0x01cee70f04570245
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 561403a2-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:10 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe6c
Faulting application start time: 0x01cee70ec8477f12
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 10929c0c-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x658
Faulting application start time: 0x01cee70e4b5727b1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9236f4ba-5301-11e3-b2ec-b8e8562f706d
21/11/2013 11:04 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xa8c
Faulting application start time: 0x01cee70dccc70c7b
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 4257ff4b-5301-11e3-b2ec-b8e8562f706d
20/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x820
Faulting application start time: 0x01cee645220cb493
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 744a4280-5238-11e3-b707-b8e8562f706d
20/11/2013 11:58 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0x760
Faulting application start time: 0x01cee5e7d393c02e
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1c32aef1-51db-11e3-9a73-10ddb1d3a475
20/11/2013 10:21 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.0.708, time stamp: 0x4f70c4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xb14
Faulting application start time: 0x01cee5da3fe7841d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 952a0ad5-51cd-11e3-8ec8-b8e8562f706d
20/11/2013 8:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x85c
Faulting application start time: 0x01cee5c8a7034e04
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: fc3e6fae-51bb-11e3-a467-10ddb1d3a475
20/11/2013 8:02 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x71c
Faulting application start time: 0x01cee5c6b5872308
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1b3c52ed-51ba-11e3-8f54-b8e8562f706d
20/11/2013 7:56 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0xdd4
Faulting application start time: 0x01cee5c5b4d6e335
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 38bf67dd-51b9-11e3-8f54-b8e8562f706d
20/11/2013 7:53 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x45ef2b00
Faulting process id: 0xfb8
Faulting application start time: 0x01cee5c5994aed2a
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: e41b8eed-51b8-11e3-8f54-b8e8562f706d
20/11/2013 5:23 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x11f4
Faulting application start time: 0x01cee5b0a915ab6d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: f2af723e-51a3-11e3-b13b-b8e8562f706d
20/11/2013 4:31 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x10d8
Faulting application start time: 0x01cee5a7a7709775
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9c86583e-519c-11e3-a64a-b8e8562f706d
20/11/2013 4:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x1390
Faulting application start time: 0x01cee5a6f5c8b771
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 589c80cd-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x57c
Faulting application start time: 0x01cee5a6dc71a5dd
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 2803eecc-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xc14
Faulting application start time: 0x01cee5a680b2c167
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 12d672bd-519a-11e3-a64a-b8e8562f706d
Heres what shows up on my Audition log.txt file
Log file created: 22/11/2013 10:14:59 AM
Ticks = 0 <2912> <AuLog.Startup> <5> Application: Audition
Ticks = 0 <2912> <AuLog.Startup> <5> Version 5.0.2
Ticks = 0 <2912> <AuLog.Startup> <5> Build: 7
Ticks = 78 <2912> <AuLog.Startup> <5> AuUI initialization sequence started...
Ticks = 78 <2912> <AuLog.Startup> <5> Initializing Crash Recovery
Ticks = 78 <2912> <AuLog.Startup> <5> Previous Crash Detected!!!
Ticks = 2044 <2912> <AuLog.Startup> <5> Initializing AuDSP
Ticks = 2044 <2912> <AuLog.Startup> <5> Initializing AuBackEnd
Ticks = 2138 <2912> <AuLog.Startup> <5> Initializing AuApplication
Ticks = 2247 <2912> <AuLog.Startup> <5> AuApplication initialization sequence started...
Ticks = 2247 <2912> <AuLog.Startup> <5> Initializing XML Loader
Ticks = 2262 <2912> <AuLog.Startup> <5> Initializing Application Settings
Ticks = 2262 <2912> <AuLog.Startup> <5> Intializing dva unit test and console
Ticks = 2262 <2912> <AuLog.Startup> <5> Initializing Audio Device
Ticks = 2325 <2912> <AuLog.Startup> <5> Initializing XMP System
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing AMIO Host
Ticks = 2340 <2912> <AuLog.Startup> <5> AMIO Host initialization sequence started...
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioAiff
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioApe
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioLSF
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp2
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp3
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioQT
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioWav
Ticks = 2340 <2912> <AuLog.Startup> <5> AMIO Host initialization sequence complete.
Ticks = 2340 <2912> <AuLog.Startup> <5> Session Host initialization sequence started...
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: FinalCutXML
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: LegacyXML
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: OmfSession
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: PremiereProInterchange
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: SesxNative
Ticks = 2340 <2912> <AuLog.Startup> <5> Session Host initialization sequence complete.
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing Clipboard Manager
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing Preset Manager
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing Favorites Manager
Ticks = 2372 <2912> <AuLog.Startup> <5> AuApplication initialization sequence complete.
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing AsyncQueueManager
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing AuUI
Ticks = 2403 <2912> <AuLog.Startup> <5> Setting up temp directories
Ticks = 2528 <2912> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 2652 <2912> <AuLog.DisplaySurface> <5> Initialize PRM
Ticks = 2652 <2912> <AuLog.DisplaySurface> <5> Initialize DS
Ticks = 2652 <2912> <DynamicLink> <5> Attempting to launch dynamiclinkManager
Ticks = 2652 <2912> <DynamicLink> <5> C:\Program Files (x86)\Adobe\Adobe Audition CS6\dynamiclinkmanager.exe
Ticks = 2746 <2912> <AuLog.DisplaySurface> <5> DS Initialize succeeded
Ticks = 2746 <2912> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 2918 <2912> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 13214 <2912> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 13229 <2912> <AuLog.Plug-in> <5> Audition Wave Amio plug-in. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 17332 <2912> <AdamEveAudioComponentEditorView::SyncParameters> <5> (from component) parameter out of range: index = 19, value = -0.251256
And here are some quick specs acording to System info
Item Value
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CHRISNEWMBOOK
System Manufacturer Apple Inc.
System Model MacBookPro11,3
System Type x64-based PC
Processor Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz, 2301 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Apple Inc. MBP112.88Z.0138.B02.1310181745, 18/10/2013
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume4
Locale Australia
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ChrisNewMBook\Chris New MBook
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 13.5 GB
Total Virtual Memory 31.8 GB
Available Virtual Memory 29.3 GB
Page File Space 15.9 GB
Page File C:\pagefile.sys
The sound hardware found on this Macbook is a Cirrus Logic CS4208 (AB 94). Atm I'm using the stock drivers included with Bootcamp. Also, both Windows & adobe software are all up to date.
Can you please help me out?
Thank youBecause my main computer is a PC with CS6 & i'm usiing my macbook as a secondery PC. Yes I could use the mac version but all my projects are done on CS6 while I have CS 5.5 on the mac partition. Plus I'm not interested in updaing to CS6 for mac (if it's possible since ny CS5.5 is an upgrade from CS5).
Anyway I just want some help fixing up Audition for windows. -
Is it possible to apply effects at an increasing rate
I guess i would like is to apply effects like reverb or detune that start off suttle and reach a peak i choose and contuniue till i want them to either fade away or stop? i believe this would be some kind of morphing or variable intensity included with an effect.
Sorry... Clicked send too soon.
To get a similar Wet/Dry effect you could copy the clips to another track and add the full effects to that. Then use the gain/volume automation to set the level of effects on the track you created.
In some effects you can set the effect level to 100% and the dry mix to 0% and then just use the tracks Automation to mix the effect. But some effects mix the dry sound without giving you control of how much. In that case, you may need to adjust the gain/volume automation of the original dry track to match the levels in the mix.
Ok... I think I got that right... -
I am having trouble applying video transitions between a few clips, other clips there is no problem. When it doesn't work I get a message that says "insufficient content for edit". The material I am working with I believe has enough of a handle to apply effects.
Do any of you have any suggestions?Recipe for your problem:
http://multimedia.journalism.berkeley.edu/tutorials/video/finalcut/transitions-h andles/ -
Feature Request: Apply effects to group of clip instances
I have been trying to supply this feature request into the Adobe feedback form. But it appeared that it was too large to be posted in a single feedback form. So I had to split it into three distinct feedback forms.
I don't want this feature request to get lost just because those three parts can't be joined back into a single feature request again. So I'd like to post it here, requesting for comments, too...
This feature request is about applying effects to more than one clip:
a)
Currently, when selecting more than one clip, it's not possible to change any effects settings. The Effects Settings windows only shows a "Multiple clips selected" message.
Thus, I'd like to suggest the following:
When selecting more than one clip, the Effects Settings window should display any effects that apply to all the selected clips. Moreover, only those effect parameter values should be displayed having the same value across all selected effects. This on the other hand, of course, can only be displayed for effect parameters not having key frames/timing activated.
Editing any of the displayed effects' parameters should apply the new value to each currently selected clip instance.
b)
Then again, when using key frame/timing activated effect parameters, it is currently not possible to apply such effect to more than a clip, too. To apply such animated effects to more than one clip it is currently necessary to nest those clips into a separate sequence.
Thus, I'd like to suggest the following improvement:
It should be possible to apply effects not only to clips but also to a group of clips (Menu Clip > Group).
Activating animation/key framing to any of the effect settings of those effects being assigned to a clip group (in contrast to those effects assigned to any clip instance contained in the the group) will allow to add key frames spanning all clips of the group.
This way it will be possible to easily create, e.g., a zoom effect spanning several clips.
If there are clips in-between those belonging to the group, the group's effects won't be applied to those clips not belonging to the group. However, the effects' parameter values are continued to be calculated in the background.
So this example would be true:
- Available clips:
| a | b | c | d | e |
- Clips grouped into a Clip Group:
| a | | c | | e |
- Zoom video effect applied to the group, having two key frames added:
Key frame #1 = beginning of clip | a |
Key frame #2 = end of clip | e |
Zoom value of key frame #1 = 100%
Zoom value of key frame #2 = 400%
--> So this will be the approximated calculated zoom value when the timeline reaches following points in time:
Beginning of clip | a |: 100%
End of clip | a |: 132%
Beginning of clip | b |: (100%)
End of clip | b |: (100%)
Beginning of clip | c |: 174%
End of clip | c |: 230%
Beginning of clip | d |: (100%)
End of clip | d |: (100%)
Beginning of clip | e |: 303%
End of clip | e |: 400%
(Unfortunately, this forum doesn't allow me to apply any kind of formatting to the example above. So I can't apply a monospace font or colouring )
When a group gets ungrouped (Menu Clip > Ungroup), effects that had been applied to the group will be assigned to each individual clip of the group. For effect parameters that had key frames/animation activated, key frames will be created at the beginning and end of each of the clips. The previously calculated values will now be inserted at each automatically created key frame to mimic the grouped effect behaviour. This operation then would finalize the Ungroup operation involving clip group effects.
Regards,
Axel DahmenYou could combine the Next/Previous Edit commands with either the Apply Video Transition shortcut or with a paste command if you had copied the transition you want.
OR... much easier if all you want is a bunch of consistent fade ins/fade outs...
On a single clip, keyframe opacity to create a fade in from the in point of the clip at the duration you like, e.g. 30 frames. Right click Opacity, and select Save Preset; give it a name, e.g. Fade In 30 Frames and set it to Anchor to In Point. Reset the effect and delete the keyframes, and then repeat this to create a fade out. Go to the out point of the clip, set keyframes, and once again, right-click Opacity and Save Preset; this time call it something like Fade Out 30 Frames and set it to Anchor to Out Point.
Now, you can simply select all of your clips in the sequence, and apply these presets by dragging them to the selection. Even though you created two presets, because you can only have one instance of Opacity on a clip, the keyframes from both presets will be added to that single effect. You have to do this with two presets--if you do it with one and use Scale, the keyframes will stretch out or compress to maintain a relative duration instead of an absolute duration. -
I'm new to Muse, but have always been curious to try it. Today I updated to Muse CC 2014.3 after watching the "up and running with Muse" videos out on Lynda.com
I'm not sure if it's something i'm not doing correctly, but I can't apply drop shadow (or other effects) to text, however I can apply effect to shapes just fine, why?This has to do with the way we set text to be rendered in the browser. You are able to apply a drop shadow to system fonts (which will be rasterized to an image in the browser), but currently web safe fonts with drop shadow aren't supported in Muse because we still support IE8 and IE9 -- which don't support the shadow effect for text. One sort of work around is to use two text frames, one which holds your text and one which has black coloring with opacity less than 100% applied to the text that gets set behind and offset to your text to appear as though it were drop shadow, while keeping your text live. Group them together and moving them shouldn't throw off your design too much.
-
I have a new Retina Macbook with Yosemite. I recently downloaded Audition. I want to apply multi band compressor to my wav file to make the sound better with the broadcast effect (a custom one to my settings). When i hit apply, nothing happens, it just says "applying effects rack" and stays at 0% and "waiting..." forever. I am beyond frustrated with this and will let my trial period expire and purchase other software if this isn't resolved. It does the same thing in Multi track mode. Thank you
I don't know why it's doing that, because the multiband compressor works fine in the effects rack, regardless of whether you apply it to just a selection, or the whole file.
If you select the effect on its own, and try to apply it to your file without using the effects rack, does the same thing happen? -
Applying effects to a small section of a track in Multi-track view, not recordin automation properly
Hello there!
Recording Automation of effects is not working properly.
In Mulitrack view, I'd like to apply effects sparingly to small sections of a particular track.
I have tried the different modes (Read, Latch, Touch, and Write).
All I'm trying to do is make the delay effect turn off completely for most of the track, but come in precisely on certain words within that track to provide a delay or echo effect on specific words, but not the entire vocal track.
Audition records the turning on and off of the effects, just not at all the way I programmed it.
Audition turns on the effects about 1 or 2 seconds after I told it to, so obviously it does not effect the words I want it to.
When I'm recording the automation I get it just right, but when I play it back, it does not effect the spots where I turned it on, it doesn't turn on the effects until a second or so after I had told it to !
I've tried everything, I did go into preferences and select "multitrack" and changed the "automation optimizations" to try to make it work, but to no avail, I changed the automatch time from 1 second to 0 seconds, then up to 5 seconds...admittedly I don't understand these "automation optimizations" but I tried all types of different settings.
All I want to do is to precisely automate the turning on and off of effects, for about 1 second at a time, to apply some delay to certain words withing th vocal track.
Now I know I can go to edit view and go through the entire track highlighting different words and applying the effects to them, but shouldn't I be able to do that non-destructively in Multi-track view through the use of Automation?
IF I must go through the entire track highlighting each word to apply delay to, then what is the best way: to first save another copy of that file so if I don't like the destructive edits the next day I can go back and restore the original file?.....What would be the best way to do this and wouldn't this way use much more space on the harddrive, wouldn't I have to duplicate entire vocal tracks and save them under a different name? What is the best way to do a workaround if I can't get automation to work correctly?
It would be great if someone could guide me through the easiest way of doing this, or better yet just tell me all the ways of accomplishing what I'm trying to do.
THANK YOU A GREAT DEAL FOR READING!Thanks for your response Steve, I didn't explain things thoroughly enough which is why you thought I hadn't tried the automation twirl down that shows the automation lanes, yes I do know about that and did try it, let me try to explain properly:
I did try it with the automation lanes before posting here and it worked with the volume and pan etc... BUT, with the delay they only let you automate one of the delay parameters at a time, SO, for instance, I can ONLY automate one of the following parameters at a time relating to delay: "wet" or "dry" or "delay" or "feedback" or "trash" or "spread" or "distortion mode"
ALL I want to do is turn the entire effect ON for 1 or 2 seconds (using the exact delay settings I already set), and then have it turn OFF until a few bars later, when, again, I would like to apply the delay effect to another individual word or two and so on...But there seems to be no option to simply turn the entire effect on or off for certain segments of a track using the automation lane (unless perhaps I create 7 automation lanes for all the parameters)...but maybe I'm missing something...
SO, what I was doing was setting the automation to record changes during playback, then I was toggling the efx "on/off" button or "power" button (the one that turns green when on) and I was clicking that on or off for each word to record that into the automation.
It worked, it does turn the efx on and off, just not at all as I did it during the recording, there is a discrepancy between when I applied it during the automation recording process and when it turns off and on during playback...it's way late, but it does turn it off and on completely, just not in the same sequence which I intened it to record.
It would have been absoltely beautiful if it just played back the on and off toggles back as I had played it, I don't understand why it's late in doing so...
"sigh"
anyway, thanks for you help.
sidenote: let me know if you understand what I did, I'm not even sure if this was intented to be a function of audition, but really it almost worked...and if I guess and turn it on about a second before I want the effect to turn on (when recording the automation) then I can get it to land right on some words, if I do it just right, but too hard to guess and anticipate perfectly every instance I should apply the effect early during the automation recording process so I and I never get it to hit every word.
it seems it should just record it as i performed it, maybe there is some setting I am missing...any thoughts on this particular method? -
After applying effects random green frames appear
When applying effects, for some reason 1-2 seconds after the effect plays there are green frames in the video. This also has happened when I used the option to slow down the video speed. Its happened to me on all projects that I have used effects on and I don't know what to do.
Do you have two video cards? There's a KB article about green frames occuring on export if you have two video cards.
Are you editing original media or optimized? You might try using optimized media as maybe the encoder is having problems with the h.264 codec.
Also try clearing out all render files from both the event and project and have it re-render everything.
Maybe you are looking for
-
How do I find the photo software that comes with J3608 printer?
I recently bought a computer with Windows 8.1 and downloaded the compatible printer driver for my All-in-One J3608 printer. On my old computer, with Windows XP, when I installed the same printer, it came with a photo program. But the new printer driv
-
Dbassist on Oracle 8.1.7 on Redhat 6.1
Hi there, I have installed Oracle 8.1.7 on Redhat 6.1 (2.2.16 Kernel). When I execute dbassist for the first time, it works fine, but subsequent executions produce the following error: SIGSEGV received at befff9dc in /usr/X11R6/lib/libXt.so.6. Proces
-
... realised... sorry
-
Hello, I had store the chinese character using nvarchar2 in Oracle9i using UTF-16 encoding (NLS_NCHAR_CHARACTERSET = AL16UTF16 ) The problem is how i can i read the chinese character using SQLPlus or iSQLPlus ? When i select the field, it display "??
-
Issues with running Siebel restart scripts on crontab. No such file error
Hello, I have Oracle Linux 5.6 and below is the cron entry. Basically executing at 5.30 AM in the morning for all weekdays. The desired function doesnt happen and it rather udpates the mailbox with the "No such file or directory error". The script is