Import and Syndicate Server Configuration
Hi All,
Is it possible to setup the time interval in Import and Syndicator, with specific to one repository.
For example, if i have one repository, for which the import has to run every 30 mins, and for another if it has to run every 3 mins.
Is it possibel to do it?.
Same for syndicator as well?
Thanks,
Priya.
Hello Priya,
This is possible in MDM 7.1 without PI .
1. For MDSS, there is a repository level MDSS.ini configuration setting for such a delay
From the MDM 7.1 Console Reference Guide:"
Auto Syndication Task Delay= (seconds) .
Integer.The number of seconds MDSSu2019s automatic syndication task waits after syndicating to all ports associated with the repository. Value copied from the corresponding property in MDM Console
2. With MDIS it is a bit more complicated as MDIS is able to process in chunks of data.
Therefore you are able to define the delay between chunks
From the MDM 7.1 Console Reference Guide:"
Inter-Chunk Delay= (MS)
Integer. The number of milliseconds MDIS waits between processing chunks of records to allow other clients access to MDS.
These are all explained in the Console reference guide.
I advise you to read the appropriate sections.
Regards,
Hedda Cohen.
Similar Messages
-
Setup interval on Import and Syndication server in 7.1
Hello Experts:
I am upgrading MDM from 5.5 to 7.1; I am having issues with Import Server picking up files from Ready folder, and Syndication Server creating the files on Ready Folder.
1. I checked Console, and both ports, Inbound and Outbound, are setup as Automatic.
2. I restarted both servers
The files are still on the ready folder for Import Server, and Syndication is not creating the file.
1. Do you know what else can I check to make this process automatic?
2. Do you know where, in 7.1, can I check the interval? I used to check it on the mdis.ini file, but I cannot find it in 7.1.
Thank you for your help,
Claudia HardemanHi claudia,
check the below points:
1) Manually you can import and symdicate those files through import manager and syndicate manager its works fine, then PI not picked those files from ready folder, check the communication channel of receiver and sender systems.
2) files having some special characters (like ", ' etc.) MDM is not supported to special characters.
3)check the MDM server running and repository loaded or not.
Regards,
Bhupal. -
Regarding MDM Import and Syndication Server
Hi,
I have earlier worked in MDM Import Server.
Today, I successfully did MDM Syndication by
MDM Syndicator.
Now, the point is I need to do Import and Syndication
by MDM Import Server and MDM Syndication Server.
The MDM Version is 5.5.
Now, the point is under my installed directory:
F:\MDM SERVER\Server
in mds.ini file:
I need to give the following path:
Distribution Root Dir=F:\MDMSER~1\Server\Distributions\
I think other than these I don't have to do any configuration
in mdis.ini or mdss.ini.
Also, I have already inbound and outbound ports made and linked
to inbound and outbound maps.
Is there any more configuration needed?
Regards
Neha SinghHi Neha,
There are many configuration needed to complete the Automatic import and syndication using MDIS and MDSS.
Please go through the link below for the same:
Master Data Management Import Server and Master Data Management Syndication Server - Webinar Powerpoint
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e
This will give you the complete steps to perform the same.
Hope it helps.
Thanks and Regards
Nitin Jain -
WPA2 and Radius server configuration
On the page: http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml
is described how to setup a WPA2 and Radius server.
If I follow this, the Radius server does not work. In the document they descibe that I need to use 10.0.0.1 as the IP, but my AP has a 192.168.1.251 address. Even if I enter that adres, or the 10.0.0.1, it does not work.
Normal WPA2 personal, without Radius does work.
I use a 1100 series AP, (AIR-AP1120B-E-K9) with a AIR-MP21G and the firmware of the radio module is 5.90.11.
The IOS version is 12.3(8)JA2.
Does anyone know what to do?
HaikHello,
I understand that. I have given the AP a fixed address, 192.168.1.251. This is outside the DHCP pool, from the router.
Even if I use this address in th Radius configuration, it still does not work. My client (laptop with Intel Pro Wireless 2200 card), detects that there is a Radius server, and asks for a username / password.
But even if I fill it in correctly (copy / paste) it does not work.
So what can be wrong with this configuration?
Haik -
Upstream and Downstream Server Configuration Issues
Hello
We're trying to configure an upstream and downstream server infrastructure. We believe that we have this configured and working properly but our issue is that local clients and servers are appearing on the downstream server and not the upstream server.
It would be useful for all clients to be managed from the upstream server to reduce administration time.
We manually assign computers to groups and use Group Policy to specify the client configuration. The client and server settings have these keys specified:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUServer Type: REG_SZ Data: (Downstream Server)
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUStatusServer Type: REG_SZ Data: (Upstream Server)
To me, this should mean that clients only get updates from the downstream server and are conmpletely managed from the upstream server but maybe it doesn't work that way?
All downstream servers are set to replicas.
Can anyone help? I'm sure you shouldn't have to assign every client to group at downstream level. I have thought about using GPO to assign to groups but it would be complicated with our structure due to testing containers and I think I would
have the same result.
Basically, I would like to assign computers to groups from all sites using the upstream server only.
Thanks in advance,
Lukeour issue is that local clients and servers are appearing on the downstream server and not the upstream server.
Number one cause associated with this symptom is not enabling Reporting Rollup on the upstream server in Options->Reporting Rollup.
It would be useful for all clients to be managed from the upstream server to reduce administration time.
This won't happen in any case. Clients are managed from the WSUS server they are assigned to. You can, however, register more than one WSUS server in the WSUS console and manage multiple WSUS servers from a single console.
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUServer Type: REG_SZ Data: (Downstream Server)
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUStatusServer Type: REG_SZ Data: (Upstream Server)
This is not correct, but it's not a critical issue since "WUServer" is set correctly. The WUA is just ignoring the incorrect value for "WUStatusServer". Both of these strings should be set to the same value -- the assigned WSUS server.
To me, this should mean that clients only get updates from the downstream server and are conmpletely managed from the upstream server but maybe it doesn't work that way?
It doesn't.
Basically, I would like to assign computers to groups from all sites using the upstream server only.
Not an option. You have two choices with replica servers:
Assign the group memberships from the assigned replica server.
Assign the group memberships via Group Policy.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
DMS and Content Server configuration
After installing the Content Server and creating a Content Repository, I have to make that documents be stored in that contet repository. Please, help me with this becasue it is not clear for me how to solve it.
Thanks!
PatriciaHello Everybody,
my team and me need your help.
We have the same problem...
- Installed Content server on Win 2003 server
- Using SAP ECC 5.0 and trying to create and configure content repository via 'OAC0'
- This is initially our test environment so here we are not using any certificates
When we try to connect the Content Server from ECC 5.0, an error popup appeared : HTTP error 401 "Error in configSet".
Is somebody has an idea ?
Latheef (or someone else), could you please forward me the Configuration document on SAP Content server ?
My mail is : <email address deleted by moderator>
Thanks in advance & Regards,
Christophe -
LSO and Content Server Configuration
Hi,
I need to connect LSO to the Content Server - how and what should I configure to do it properly?
What information should I get from a client to be able to establish this connection?
Regards,
OtoconHi Otocon,
Please check this thread - LSO - Enterprise Portal Integration
Regards,
Sen -
Recommended and supported Hyper-v Server configurations
I am looking for a document that will give me some suggested Hyper-v supported and recommended server configuration. Recently our company rolled out two Hyper-V servers. The host system is configured to be the Domain Controller.
One server was configured to be a Host Server Domain Controller and a virtual server Exchange server. The Exchange server failed three times. The host domain Controller had been put into services and was active. I finally called Microsoft
and was told this would not a supported or recommended configuration and it would continue to fail. The technical help I had was very good and he pointed me in the right direction to building it directly on the domain controller. Since the Exchange
server had already been built and the scheme to the domain controller had been extended this was horrendous but it worked. "Thank you Microsoft technical team."
The second Hyper-V server is setup the same the host server is the DC. The current virtual server is a SQL server. This seems to be working. We had some issues at first with network connections but I made some DNS entries and it seems to be stable
now. This system is to have an Exchange host added to it and I'm worried that it will have the same issues as the first server. I would like to add it directly to the DC as I finally did the first time but I'm worried it will make the SQL server
fail.
This is currently in a production environment? Does anyone have any suggestion or can you point me to a good tech document that discusses configurations?
Thank you.
Bonnie WhalonHi Sir,
>>I would like to add it directly to the DC as I finally did the first time but I'm worried it will make the SQL server fail.
As far as I know , install exchagne on a DC is not recommended (I know it should work).
As to hyper-v serve , it is still not recommended to enable other role on hyper-v host .
I would suggest you to create two VMs , one is DC , other one works as exchange server (If it is possible please build another DC VM for redundant and backup them regularly ) .
Virtualize exchange please refer to following article :
http://blogs.msdn.com/b/virtual_pc_guy/archive/2013/10/07/virtualizing-exchange-on-hyper-v.aspx
Virtualize DC please refer to :
https://technet.microsoft.com/en-us/library/d2cae85b-41ac-497f-8cd1-5fbaa6740ffe(v=ws.10)#operational_considerations_for_virtualized_domain_controllers
https://technet.microsoft.com/en-us/library/hh831734.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
DNS server configuration and behaivour
Hi all,
I'm looking for detail explanations which can explain how Mac OS X 10.6 *DNS client* works and may be configured.
According to http://discussions.apple.com/thread.jspa?threadID=2227251 nothing is not guaranteed like order and failover.
According to http://support.apple.com/kb/HT4030 failover will take affect when DNS server returns with SERV_FAIL (0x2) error code. What about NXDOMAIN (0x3) error code (which is more interesting scenario)?
What I'm looking for DNS client?
I'm looking for several DNS servers configuration which allow to split DNS domains for several areas. This, for example, may be very useful for VPN connections when VPN DNS server will resolve internal resource and another server (configured before VPN tunnel established) will resolve external resources.
Is there any possible configuration to achieve this requirement for Mac OS?
Thanks in advance,
Oleg.Thanks Felix for quick response.
In your scenario:
1. You configured to different DNS servers and probably only one of them replied to DNS queries. And this is OK.
2. When non valid IP configured means that DNS server will not reply to DNS query and than failover will query the second DNS server in the list. And this is also OK.
I'm looking 2 different DNS servers configuration when one of them will reply to different domains. For example:
First server will reply to *.mycompany.com.
The second one will reply to any query except mycompany.com domain(since it is not published).
Thanks again,
Oleg. -
BO MOBI with BOE and Mobile server on two separate servers
Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated. -
MOBI with BOE and mobile server on different servers
Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.
-
BPC NW and Related BW Configuration
Hi All,
We are currently in development stages of BPC NW. I have a question regarding the BPC and BW server configuration and load balancing.
Our BW user base is about 200.
When we implement BPC we are targeting to roll it out to a initial group of 100 BPC users. Per our understanding all place calls to the existing BW application/database servers to get their reports.
Are there any sizing documents/guidelines that talk about the tuning that is required to the existing BW servers to accomodate BPC users as well?
Thanks,
ShaiHi Shai-
Please see attached docuement that describes the sizing requirements for SAP BusinessObjects Planning and Consolidation version for Netweaver installation.
Regards,
Sheldon -
Steps to configure Import Server and Syndication server
Hi,
Can some one help me to work on Import Server and Syndication server. I know there are few forums availabe on this topic but they are not very basic. I need to know the basic step(From installation to automatic transfer of data.) to work on Import <b>Serve</b>r and Syndication <b>Server</b>.
Regards,
Ron
Message was edited by:
RonHi Ron,
The MDM Import Server is a background process (service), which separates the core processing of master data imports from the front-end processing. MDM Import Server allows you to load master data records periodically from various
client systems to various MDM Servers and repositories based on the port concept.
Once the data is delivered by SAP XI on a specific port, it will automatically get picked within a configurable time interval and queued up for import processing.
MDM Import Server creates log files of the entire load process, which are stored
in the port folder Log and can be displayed in MDM Console.
If an error occurs in the automated import, the MDM Import Server stops and
drops the XML in the Exception folder of the port. You can import the XML
interactively using the MDM Import Manager and correct the error (for example
complete the import map).
Hope this might help....
thanks
Alexander
P.S. Kindly reward the points, if found helpful. -
Regd.UDDI server configuration in PI 7.1 and services registry
Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi -
BI Schedule and Presenation Server on Different Servers Configuration
I'm having a problem getting my iBots to run and deliver the information to the catalog with the following configuration:
2 Presentation Servers on Windows with IIS for NTLM authentication (via a Load Balancer)
OBIEE Server and Scheduler, and Presenation Server on Solaris (the Presentation Server on Solaris will be turned off)
The catalog between the 2 Windows Servers are are shared. When I create an iBot on the Windows the request is sent to the Scheduler on Solaris and errors out with the following message:
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (
/shared/_ibots/Test Email from UAT)^M
Error Codes: U9KP7Q94^M
My question is why does the scheduler send the alert to the Presentation Server on the Solaris box and not the shared Presentation Server with the shared catalog on the Windows Servers. Am I missing something in the configuration?
Thanks,
ChuckI figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.
Maybe you are looking for
-
Hello everyone. Any suggestions would be appreciated. I'm running 10.9.7 on MacBookPro. To fix, I backed up iCal, deselected sync in system pref, all data cleared from iCal, restored it by import, ticked to sync in preferences – nothing. I even manua
-
How to find out the line which caused the runtime error in a SP?
We have a situation like this. We are consulting company doing consultancy services on Oracle technologies. One of our clients have PL/SQL stored package. We found out by debugging the Oracle Forms front-end application that error is generated by a p
-
Planned order to Purchase Req. Conversion
Hi, I have a planned order dated June. When will this be converted to a Purchase Requisition?? based on Planned delivery time and GR processing time?? Kindly clarify TIA Sabitha
-
Epson R1900 Print Problem - Image shift/Cropping
When Printing 13x19 files in Photoshop, the image always prints centered in an 8.5 x 11 area at the lower right corner of the page as it comes out of the printer. The image is cropped into this letter sized area at its correct size and is not scaled.
-
I have photo stream on and took photos recently and cant find them on my computer. I tried restarting the computer but still nothing. How do I get them on photo stream?