In Bound queue status in SMQ2

Hi All,
i've created a customer in CRM and saved it.
i've filled all the mandatory fields and it should replicate to ECC.
i've checked in SMW01, BUPA_MAIN BDoc is in intermediate state ,then i went to SMQ2 in CRM to check the queue status it is in READY status then upon unlocking the queue and refreshing it moved to RUNNING status and cleared from the inbound queue.....then upon refreshing the SMW01 ,BDoc BUPA_MAIN moved from intermediate state to send to receiver status and customer replicated to ECC.
My query is whenever i create any CUSTOMER/LEAD the queue in SMQ2 should go to RUNNING status and get processed automatically, every time i'm clearing the queue in SMQ2 and refreshing the SMW01 to reliacate the customer to ECC.
Please suggest me if any configuration change i've to do for the automatic queue clearence.
i've cleared all the queues in SMQ2 , there are no queues in wait/failed Status.
Thanks,
Syam

Hi Rohit Sharma,
Thanks for the help it solved my query.
I have one more query ,
Now the customer replicated to ECC without manual clearence of the queue.
even though the customer replicated to ECC i have the BDoc state of the BUPA_MAIN BDoc type as 'Sent to receivers (not all have confirmed)' with yellow light.
BDoc state should change to 'Confirmed (fully processed)' upon successful replication to ECC like BUS_TRANS_MSG for Lead.
Please suggest on any configuration change has to be done for the above query.
Thanks
Syam

Similar Messages

Queue Status in SMQ2 = RUNNING, but Stuck.

I have a queue that sometimes gets stuck in SMQ2 in status RUNNING (for no apparent reason).
If I activating the queue manually (as suggested in
http://help.sap.com/saphelp_nw04/helpdata/en/d9/b9f2407b937e7fe10000000a1550b0/frameset.htm)
usually solves the problem.
Therefore, this queue processes messages 24x7 and cannot get stuck for more than 5 minutes.
Question n1)Is there a way I can do this automatically (scheduling a JOB) (itu2019s a specific queue, that is only used for this single process)?
Question n2) Sometimes, after activating the queue again, the message continues in status RUNNING, and the only solution is to delete the message and activating the queue manually (when I do this, after processing every message in the queue, when new messages begin to arrive, the queue goes to status READY for a LONG time.) Does anyone knows whats going on?
obs.: The message is ALWAYS processed successfully, and there is no problem to process it 2 times. The only thing that cannot happen is STOP the process.
Thank you.
At.,
Bernardo Tavares Braga

1) I already registered all the queue through sxmb_adm - didn't change anything.
2) This queue is on SAP PI/XI, but the message goes to SAP ECC.
Since the process is executed, what I think happens is that the message updates SAP ECC, but somehow it doesn't give a return to SAP PI/XI.
So SAP PI/XI thinks its still executing.
Pinangshuk, the MONITOR QRFC_RESTART_ALLOWED is set to value 1(in the Integration Engine configuration - sxmb_admin)
Also, this enables the restart of stuck queues manually. Is there a way to do this automatically?

** Message being processed - Queue status green colour

Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.

HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS

SYSFAIL status in SMQ2

Greetings
Ive started customer_main intial load and its still in running status.
SMQ2 shows R3AI_CUSTOMER_MAIN in SYSFAIL status.
When I double click on it it throws out error in Mapping( Details: Transaction SMW01)
No queues in R3
Pleaze advice im still fairly new to this middleware issue. How to fix this problem i am having
Thesen

Hi Shanthala
In CRM table CRMM_BUT_CUSTTNO shows 2 different customer no's for the same partner guid
in R3 under table CRMKUNNR it shows one customer no for one partner guid which looks correct
Any idea how this happend and what the cause might be
Thesen

Messages stucked in moni with queue status as "RUNNING"

Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.

Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh

Error"XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue sto" in SMQ2

Hi,
When i am trying to test my JDBC to ABAP Server proxy i am getting the error(XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue sto) in SMQ2 please advice me what could be the problem?
Regards,
Bhoj

Hello better you apply LUW on each and every message in SMQ, queues. Else activate and inactivate the messages in the queue by sxmb_adm -> managequeues -> deregisterqueues -> registerqueues -> activate queue.
And also do if any messages are failed follow the blog to resend the failed messages,
XI : How to Re-Process failed XI Messages Automatically

CCR -Queue Status "SYSFAIL"

Dear all,
While doing CCR i am getting the error with queue status as "SYSFAIL" in inbound queues of APO, When displyed the same saying " Enter Purchase Group" When displayed data from LUW in binary code shows material as semifinished material is it right?
I am unable to find out the material for which it shows this error, This error apperaed first time.
Please help me out How can i trace this error.
Regards,
Amol

Hi,
What says the application log (SLG1)
You can look there by the "TID of First LUW" entry and search by "External ID" field in SLG1.
Usually from there you can get order number, material number, plant and some other useful data. Does it bring more light?
btw. "Enter Purch. Group" error usually is seen in the inbound queue, when the purchasing group of the material master is not maintained. See SNP2 tab of the material master - it should be filled.
br,
Mikhail

Server Admin doesn't show Print Queue status

When I look at my print queues (all 17) under Server Admin, it shows queue name, # of jobs, shared via (IPP & SMB), and printer kind (HP LJ 1022n and HP LJ P2015). It has a column for status, but this is always 100% empty/blank. Also, if I go to the Jobs tab, then I can pick "Jobs on Queue" for all the queues, but the line below for "Queue Status" is again always blank.
Is there something I can do to get this info to show up in Server Admin? I know that CUPS knows the printer status, as I can go to localhost:631 and see the status in the Printers list and the Jobs list.
It isn't life threatening. It is just annoying to have to go to the web page when Server Admin -almost- gets me everything I need to diagnose a teacher's printing problem remotely.

Hi Keith
You could always consult the Print Service logs. If you set the logging levels to Debug or Debug2 you should get everything. You have to be a bit careful with this as the log can get quite large. Other than that I don’t know of anything that is available out of the box.
There may be others that can suggest a 3rd party solution that gives you the appropriate feedback you are looking for. Opening port 631 should not be that much of risk I would have thought?
Tony

BW Queue Status Stopped: SXMB_MONI

Hi
I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
Can anyone suggest what can be the problem?
Regards
Swetank

Hi,
is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
so check if there is any place in BW system where you can register the queues.
cheers,
Siva maranani.

Queue Status is showing Stopped

Folks,
I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
Please let me know how to start the queue.
Manish

Still the queue is showing stooped , here is the trace ,
<i><b> <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: XIAPPL</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
Can anybody let me know what is the problem

Queue status is stopped

Hi,
I have a File to Proxy assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni, the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
I have already read all the posts about this and couldn't find any solution... Can anyone help?
Thanks.
Shwetha

Yes connection is set proper now.
And the scenario involves EOIO
Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Regards,
Abhishek.

Queue status stopped

Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.

Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek

Message Status as "Scheduled" and Queue Status "Queue Stopped".

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Message Status "Scheduled", Queue Status "Queue Stopped"

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Changing ThreadPoolExecutor to prefer thread use to bounded queue

I would like to extend ThreadPoolExecutor to create new threads up to maximumPoolSize and then put tasks onto a bounded queue. (Kind of a cross between Fixed and Cached thread pools).
It seems that the only place to do this would be to rewrite the execute method of ThreadPoolExecutor and swap the following commands
if (workQueue.offer(command)) // Swap this
return;
Runnable r = addIfUnderMaximumPoolSize(command); // with this
if (r == command)
return;
if (r == null)
reject(command).
...However with most methods and vars private in ThreadPoolExecutor, overriding this method is nearly impossible.
Is there a better way of doing this?
Thanks,
Chris

nope - there is no chance. sadly not! otherwise i would have integrated it into my templates
btw - you could change all the links into a rollover, but that would mean that ALL links are a rollover.
another way is to use iwebmore to edit the template files: http://iwebmore.ctrl-j.eu/iWebMore.html
max karreth

In Bound queue status in SMQ2

Similar Messages

Maybe you are looking for