Queue Status is showing Stopped

Folks,
I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
Please let me know how to start the queue.
Manish

Still the queue is showing stooped , here is the trace ,
<i><b>  <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- <!--  ************************************
  -->
  <Trace level="1" type="T">User: XIAPPL</Trace>
  <Trace level="1" type="T">Language: E</Trace>
  <Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
  <Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
  <Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
  <Trace level="1" type="T">Syntax-Check-Flag</Trace>
  <Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
  <Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
  <Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
  <Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
  </Trace>
  <Trace level="1" type="T">Set Receiver Routing-object</Trace>
  <Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
  <Trace level="1" type="T">COMMIT is expected by application !</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
Can anybody let me know what is the problem

Similar Messages

  • Dispatcher status  showing stopped for disaster recovery server.

    HI,
    today to test the data in our disaster recovery server for which we have log shipping every 30minutes we started the server in sap level during the process we can see that work +disp status is showing stopped.when i checked the log files in work directory it is showing below errors.
    C  sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
    M  *  LOCATION    SAP-Server atriooonsapdr01_INP_00 on host terhsapdr01 (wp 0)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Mon Oct 06 16:31:42 2008
    M  *  RELEASE     640
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        9780
    M  *  COUNTER     1
    kindly suggest what to check and how to resolve.

    Hi Anil.
    you should be sure if user SAPINPDB exists in the database system and it is mapped to the SAPINPDB user of the DB.... this if you use SQL Server, but the rule should be something like this in other DB systems!!!
    Regards
    Pedro

  • Queue status stopped

    Hi All,
    I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
    I have tried deregistering and registering the queue.
    i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
    Anyone having a clue?
    Thanx in advance.
    Latika.

    Hi Latika,
    Reason,
    http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
    1. Try restarting J2EE stack.
    2. One of the reason may be database overflow. In this case also, restart is required.
    3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
    Check out Steve Winkler's response here
    To Be Delivered on Adapter Message for JDBC
    Regards,
    Prateek

  • Message Status as "Scheduled" and Queue Status "Queue Stopped".

    Hi friends,
    My scenario is from Peoplesoft -> XI -> BI
    Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
    How to proceed further ? How can I start that queue ?
    Thanks ain advance,
    Neena John

    Hi Neena,
    Go to SXMB_ADM -> Manage Queues -> Register Queues
    More on queues
    XI :  How to Re-Process failed XI Messages Automatically
    Run the report RSXMB_REGISTER_QUEUES and register the queues
    Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
    Refer this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
    Regards,
    Vinod.

  • Message Status "Scheduled", Queue Status "Queue Stopped"

    Hi friends,
    My scenario is from Peoplesoft -> XI -> BI
    Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
    How to proceed further ? How can I start that queue ?
    Thanks ain advance,
    Neena John

    Hi Neena,
    Go to SXMB_ADM -> Manage Queues -> Register Queues
    More on queues
    XI :  How to Re-Process failed XI Messages Automatically
    Run the report RSXMB_REGISTER_QUEUES and register the queues
    Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
    Refer this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
    Regards,
    Vinod.

  • Server Admin doesn't show Print Queue status

    When I look at my print queues (all 17) under Server Admin, it shows queue name, # of jobs, shared via (IPP & SMB), and printer kind (HP LJ 1022n and HP LJ P2015). It has a column for status, but this is always 100% empty/blank. Also, if I go to the Jobs tab, then I can pick "Jobs on Queue" for all the queues, but the line below for "Queue Status" is again always blank.
    Is there something I can do to get this info to show up in Server Admin? I know that CUPS knows the printer status, as I can go to localhost:631 and see the status in the Printers list and the Jobs list.
    It isn't life threatening. It is just annoying to have to go to the web page when Server Admin -almost- gets me everything I need to diagnose a teacher's printing problem remotely.

    Hi Keith
    You could always consult the Print Service logs. If you set the logging levels to Debug or Debug2 you should get everything. You have to be a bit careful with this as the log can get quite large. Other than that I don’t know of anything that is available out of the box.
    There may be others that can suggest a 3rd party solution that gives you the appropriate feedback you are looking for. Opening port 631 should not be that much of risk I would have thought?
    Tony

  • BW Queue Status Stopped:  SXMB_MONI

    Hi
    I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
    That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
    If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
    Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
    Can anyone suggest what can be the problem? 
    Regards
    Swetank

    Hi,
    is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
    B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
    so check if there is any place in BW system where you can register the queues.
    cheers,
    Siva maranani.

  • Queue status is stopped

    Hi,
    I have a File to Proxy  assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni,  the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
    I have already read all the posts about this  and couldn't find any solution... Can anyone help?
    Thanks.
    Shwetha

    Yes connection is set proper now.
    And the scenario involves EOIO
    Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
    Regards,
    Abhishek.

  • Unable to ship confirm, showing stops cannot be set to status closed

    hi all,
    while i am performing shipconfirm,
    it showing "Error:some deliveries selected for ship confirm have errors or warnings"
    and details showing "stops cannot be set to status closed"
    appreciate u r best suggestions.
    thanks
    govardhan

    Dear ,
    Maybe you need to check all delivery line status ..
    All line status should be "Staged.." .
    If there is any status not staged, System will show the error.
    Hope it's useful to you.

  • Status of my application is showing Stopping from last 6 hrs

    Hi,
    I am not able to start my application "Planet" in "p1940097444trial account"
    From eclipse and cockpit it is showing Stopping from last 6 hours.
    I am not able to even kill the process.
    Any help is appreciated.
    Thanks,
    Harshith.

    Hi Harshith,
    I happened with me too! However, you can easily stop this process and retry. Go to processes and close all processes specific to your application. This should make your server in stopped status. Now, login to HCP and refresh the page. Manually stop the application. Now again try to deploy application from Eclipse on HCP Server connected to your trial account. This should get throug successfully. I am not sure why the process gets stuck randomly, but I am sure doing this would resolve your problem. I was able to.
    Best Regards,
    Ameya

  • Can't print- 27" 2013 iMac-my epson stylus 3800 pro will not print-i updated driver n added printer in syst prefs-When i print the printer queue opens and shows the job as "stopped"-Supply level "information is not available"-maybe part of problem...thx

    I can't print from my  27" late 2013 iMac.  I am using an epson stylus 3800 pro.  I updated driver and added printer in system preferences. When i print the printer queue opens and shows the job as "stopped".  Supply level shows  "information is not available which maybe part of problem...thank you

    The first thing you could try is a reset of the printing system. Please note that this action will remove all printers and scanners from the Printers & Scanners preference pane.
    With the reset complete, unplug the Epson USB cable from the Mac for a minute and then reconnect it. This action should result in the printer being added again to the Mac automatically. If this does happen, then see if you can print again.
    If the printer is not added again automatically, open Printers & Scanners and click the plus button to add the Epson. Once this is done, then see if you can print again.

  • Queue Status

    Hi ,
    I have a file to file scenario which works fine but the moment I execute file to JDBC scenario the queue got stopped. Now file is scenario is also not working due to stopped queue. Interestingly, when I checked the details of succesully processed message then queue is XBTO___001 and for all stopped queue scenario queue is XBTI002, 3 or 4. All the Queue are registered. I am not able to undestand what is happening technically. also, how do I start the stopped queue? Inbound Queue monitor is showing SYSFAIL as the status. if I click on SYSFAIL then on another page its showing XI restart in qRFC is not allowed.
    Thanks
    Sanjeev Sinha

    Hi Ahmad,
    Thanks for the response but my problem is still not solvedI am able to see all the XBTI* queue and unlock XBTI003 after that I processed the file again and it went into SYSFAIL state. Do I need to restart the server? Also , what is reason behind queue getting stopped? Is it due to running any faulty scenario?
    Is it right that only one XBTI* queue will be active at any point of time bcos if I try to release the lock of any other XBTI queue then XBTI0003 goes into SYSFAIL state. Is there any document for understanding the queue usage in SAP XI context?
    Thanks
    Sanjeev Sinha

  • Queue status no send or waitupda in SMQ1

    Hi,all:
      Now our BW system can not do delta upload usually.I find some queue status nosend or waitupda in SMQ1 in source system(CRM). How to make them work usually? Can you give me some advices?
    Regaards&Thanks!
    zagory

    hi Zagory,
    which datasource are you using ? 0crm_sales* ?
    have you activate it in BWA5 ?
    take a look oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction
    Question 3 : The Deltas for my data source are not extracted . What can I do?
    Suggestion 3: Please check the following.
    Please Check if the services have been generated in transaction GNRWB.
    If they are not active(not marked 'X' before their names) then activate the services following the steps here.
    Go to transaction GNRWB
    Select BUS_TRANS_MSG
    Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
    Press Generate.
    Also check  for the following:
    1. The delta should have been initialized successfully.
    2. Confirm that all Bdocs of type BUS_TRANS_MSG
       are processed with success in SMW01.
    3. If there are queues in SMQ1 with erroneous status then activate these queues.
       In Transaction SMQ1 if there are Queues existing with
       names beginning with CRM_BWAn (n is number) then
       activate these queues in the same transaction.
    hope this helps.
    Symptom
    There may be problems or issues related to data tranfer from CRM to BW.
    Other terms
    CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
    Reason and Prerequisites
    There could be errors in customization or program errors due to which
    data may not be transferred or incorrectly transferred to BW.
    Solution
    Question 1 : The Extraction from CRM to BW takes a very long time. What
    can be done? (Performance Issues)
    Question 2 : On executing transaction RSA3 I get records but I find 0
    records when I load data from BW request.(No Data Available).
    How can I extract data in this case?
    Question 3 : The Deltas for my data source are not extracted . What can
    I do?
    Question 4: How can I extract the fields, which are not provided in the
    standard  data source extraction ?
    Question 5: I am unable to extract  user status correctly.What should I
    do?
    Question 6 : What can I  do when the activity/Opportunity/Complaint
    reasons(Code,CodeGruppe,Katalogart)  are not extracted?
    Question 7: What can I do if the deleted opportunities
    are not reflected in BW?
    Question 8: How do I activate the metadata?
    Question 9: I donot get any records for the delta upload of my attribute
    datasource(s).What is to be done?
    Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
    and various other BW status mean ?
    Solutions
    Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
    Suggestion 1: Please implement notes  653645 (Collective note) and
    639072(Parallel  Processing).
    The performance could be slow because of the wrong control parameters
    used for packaging.
    You can change the package size for the data extraction.
    Also note that changing the package size in the transaction SBIW
    would imply a change for all the extractors. Instead, you could
    follow the path in the bw system.
    Infopackage (scheduler)    > Menu 'Scheduler'   > 'DataS. default data
    transfer'   > maintain the value as 1500 or 1000(This value is variable)
    The package size depends on the Resources available at the customer side
    (The no of parallel processes that could be assigned =
    1.5 times the no of CPU's available approx.)
    Question 2 : On executing transaction RSA3 I get records but I find 0
    records when I load data from BW request.(No Data Available)
    Suggestion 2: First check if there are any entries in the table
    CRMD_ORDER_INDEX.Only if there are entries in this table you can
    extract records.
    If this is not the case then,
    It is possible that the user does not have sufficient
    authorities for extraction of  the relevant objects.
    Additionally, please review and implement the following notes
    615670
    161570
    150315
    618953
    If you are in the release 4.0 then
    To do BW extraction with the user please see that the following
    authorization object exists(display mode is enough):
    CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
    CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
    CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
    (all these objects are linked to transaction crmd_order).
    Question 3 : The Deltas for my data source are not extracted . What can I do?
    Suggestion 3: Please check the following.
    Please Check if the services have been generated in transaction GNRWB.
    If they are not active(not marked 'X' before their names) then activate
    the services following the steps here.
    Go to transaction GNRWB
    Select BUS_TRANS_MSG
    Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
    Press Generate.
    Also check  for the following:
    1. The delta should have been initialized successfully.
    2. Confirm that all Bdocs of type BUS_TRANS_MSG
       are processed with success in SMW01.
    3. If there are queues in SMQ1 with erroneous status then activate
       these queues.
       In Transaction SMQ1 if there are Queues existing with
       names beginning with CRM_BWAn (n is number) then
       activate these queues in the same transaction.
    4.a)If required activate the datasource
        Go to transaction BWA5   > select the required datasource and
        activate.
    4 b) The Delta may not be active ,activate the delta in BWA7 by
      selecting the name of the datsource and pressing the candle icon for
      'activate delta'.
    5. In BW system
       Go to transaction RSA1   > modeling   > infosources   > select the
       infosource   > right mouse click on the selected
       infosource   > choose option replicate datasource
        Activate the infosource.
    6. Go to the scheduler for the infosource   > select delta  in the
        update  >choose the option PSA only (in the Processing tab)
        > start immediately
    Check the entry in the RSA7 in the OLTP(CRM system)
    Question 4: How can I extract the fields, which are not provided in the standard  data source extraction .
    Suggestion 4: Follow the steps mentioned below.
    1. Enhance Extract Structure with the required fields. (Create & include
       an append structure to the extract structure via transaction RSA6).
    2.a) Release the fields of the append  for usage. (  To do this, double
       click on the Datasource and remove the flags in the column 'Hide
       Field' for all fields of Append. )
    2.b)If the new fields cannot be seen in the extract structure of
        the transaction BWA1 then change and save the datasource, and then
        activate it in RSA6.
    3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
    Goto SPRO .
    Follow the path ->
    SAP Implementation guide ->Implementation with other mySAP components ->
    Data transfer to the Business Information Warehouse->
    Settings for the application specific datasources (CRM)->
    Settings for BW adapter->
    Badi :BW adapter :Enhancement of datasources in messaging flow.
    4. Replicate the new Datasource to BW.
    5. Expand the Communication Structure in BW.
    6. Maintain transfer Rules for the new Datasource.
    7. Activate the trasfer rules and perform the upload.
    Question 5:  I am unable to extract  user status correctly.What should I
    do?
    Suggestion 5 :Check the following notes
    531875
    616062
    713458
    700714
    765281
    Question 6 : What can I  do when the activity/Opportunity/Complaint
    reasons(Code,CodeGruppe,Katalogart)  are not extracted.
    Suggestion 6 :Check the following notes
    481686
    516820
    603609
    617411
    711146
    Question 7:Deleted opportunities are not reflected in BW.
    Suggestion 7: Check the note 706327.
    Question 8: How do you  activate the metadata?
    Suggestion 8:CRM BW adapter meta data has to be activated first before
    it is available in the system. You can use Transaction BWA5 to copy the
    meta data for selected DataSources. You can reach the transaction via
    the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
    Information Warehouse -> Activate BW Adapter Meta Data'. For more
    information, see the documentation on the IMG activity 'Activate BW
    Adapter Meta Data'.  (Note 432485)
    Question 9: I donot get any records for the delta upload of my attribute
    datasource(s).What is to be done?
    Suggestion 9: In case of attribute datasources, it is possible that the
    entry for the GUID is missing in the table SMOXAFLD.
    If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
    then you can follow the steps:
    1)If Delta process is active for the attribute datasource e.g.
         0CRM_OPPT_ATTR,  then stop the delta process in the BW
         system 
    2) In the CRM system, Make the entry in the table SMOXAFLD
       for the datasource with the Key
       as  0CRM_OPPT_ATTR     GUID 3) Save the entry.Activate the datasource                           4) Check that the above entry is replicated in smoxafld_s also    after this.               5) Create a transport request manually for the following    object             R3TR   SMO4   0CRM_OPPT_ATTR    
    Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
    Suggestion 10: The BW status are used to extract system and user defined
    status.
    The BW status are defined in the customization settings in SPRO.
    Check for-> Status Concept for BP/Product/CRM objects
    Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
    Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.

  • ** Message being processed - Queue status green colour

    Hi Friends,
    Many messages in our SXMB_MONI  shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
    Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
    Kind Regards,
    Jeg P.

    HI,
    QUEUE STATUS RUNNING BASICALLY MEANS THT
    The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
    HOPE THIS WILL SOLVE THE PROBLEM
    PLZ REWARDS POINTS
    VIKAS

  • CCR -Queue Status "SYSFAIL"

    Dear all,
    While doing CCR i am getting the error with queue status as "SYSFAIL" in inbound queues of APO, When displyed the same saying " Enter Purchase Group" When displayed data from LUW in binary code shows material as semifinished material is it right?
    I am unable to find out the material for which it shows this error, This error apperaed first time.
    Please help me out How can i trace this error.
    Regards,
    Amol

    Hi,
    What says the application log (SLG1)
    You can look there by the "TID of First LUW" entry and search by "External ID" field in SLG1.
    Usually from there you can get order number, material number, plant and some other useful data. Does it bring more light?
    btw. "Enter Purch. Group" error usually is seen in the inbound queue, when the purchasing group of the material master is not maintained. See SNP2 tab of the material master - it should be filled.
    br,
    Mikhail

Maybe you are looking for