In need of Tiger Samba Bible - OD/PDC/BDC question.
To cut to the chase, we have two 10.3.9 servers at two sites, both running as OD Master, PDC for two separate domains. Each has it's own users, some frequent travellers have accounts on both machines. Note that the Samba dmain name is NOT the same at both locations.
Well, the time has come, and my task is to merge the domains into one cohesive whole as part of a general upgrade to Tiger. I am researching the pitfalls of the basic upgrade of a single server, but let's assume I got past all that. Now I want to make the remote server a BDC for the primary, and sanely merge all the users into one directory structure. They will communicate via VPN tunnel, different subnets.
Anyone done this, or know of a Bible of Samba PDC under OSX?
TIA
jth
Hi I have exactly the same problem. I'm pretty sure that somehow is related with the hardware of the computer, as only one of my computers seems to be affected by this problem. I'm I a networkmanager user. I have solved the issue by taking away samba from the daemons array in /etc/rc.conf (in fact I putted a ! in front what is the same). An the following the suggestion up. I have made a script "/etc/NetworkManager/dispatcher.d/30_samba":
#!/bin/sh
INTERFACE=$1 # The interface which is brought up or down
STATUS=$2 # The new state of the interface
case "$STATUS" in
'up') # $INTERFACE is up
exec /etc/rc.d/samba start
'down') # $INTERFACE is down
# Check for active interface and down if no one active
if [ ! `nm-tool|grep State|cut -f2 -d' '` = "connected" ]; then
exec /etc/rc.d/samba stop
fi
esac
as indicated in wiki networkmanager and pointed above. Finally, I set the permission for "30_samba" scrip to 755 and the ownership to root:root. Now it works.
Note: If I leave the samba daemon in the array or background it I get a weird problem as only the nmbd but not smbd in up after reboot.
I hope it helps to others. Still I found very weird this behaviour. It has been going on for a long while with this computer although I was lazy to dig in the reasons until now. I will really appreciate if someone more skilful could have a look to the problem.
Last edited by hseara (2011-10-30 10:55:13)
Similar Messages
-
I run Mac OSX Snow Leopard 10.6.8 -----> I downloaded this battery firmware update and upong launching the update
it tells me that I need OSX Tiger 10.4.11 , Leopard 10.5.6 or newer.
Then the updater quits automatically.
Can anyone plese help me? What the dickens is happening?ACTUALLY according to Mac Suport site , yes I do need the firmware batery update.
http://support.apple.com/kb/HT3421
All these applies to my MacBook:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
And when runiing the isntaller it tells me that I need OSX Tiger 10.4.11 , Leopard 10.5.6 or newer.
I run Snow Leopard which is NEWER....
What to do?... (pacing....pacing..... tun on heels and paciong, pacing.....) -
Samba As Windows PDC problem + AD
Hello All,
In an effort to minimize the amount of different logins my users have, I am trying to create a windows domain with Samba as a PDC in OSX Server 10.6.6. Before attempting to "create" this domain Samba was running on the server as a "Standalone" server with default settings. When the role of the SMB server is changed to "Primary Domain Controller" a Fatal Error shows up in the logs saying it cannot find its workgroup. Here is a sample:
# [2011/04/13 19:22:06, 0, pid=148] /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup "#####"
I have gone thru and tried to reset all settings for samba, shutting it down and restarting, deactivating the service. I have also scoured the internet to find a solution. Reading thru the manual for Samba PDC in apples documentation make this process seem as if it were as easy as pie. I am stumped.
My ultimate goal is to create this domain and have a Windows 2008 SBS authenticate to it. The SBS will be acting as a terminal services machine.
In everything I have read, the "Normal" or accepted setup is to have OD authenticate to AD, not the other way around. Since our system is entirely Mac(except the accounting server) and our OD is active and running, I would prefer not to change to AD.
Can anyone shed some light on what might be wrong? Any help is greatly appreciated.
Sincerely,
-NettiDid I post this in the wrong place. Please, any advice is appreciated.
-
Need Help with FCP7 import and plug in question.
Hello,
I just registered and would like to ask two questions. Everything else I'll use the search function for but I need the answer right away.
Ok First question. I have a mac pro at home and a intel macbook both with FCS4 during the holiday season I'd like to work on a project on my laptop. Now I have all my files on a 2.0 USB drive(I know its not that fast for video) but this is only temp. while traveling. I'm trying to figure out why it wont import the files into another project. Even when I'm at my home Mac Pro when I try to import a projects footage into another project it doesn't read it. This comes up
"File Error: 0 file(s) recognized, 0 access denied 254 unknown"
But all the files will work in the project that it was originally captured too.
If this helps the codec is sonys HDV 1080 60i converted to Apple ProRes 422(HQ) which I found out I should only use the regular Apple ProRes 422. I'm stuck now b/c I cannot import the files into a new project to work in on my laptop. Plus my Macbook doesn't have Firewire800 so I have no way to get the footage from tape to my laptop other then my USB Hard Drive.
I also have problem importing the files in Motion and Cinema Tools they also are not recognizing the files which is getting me upset since they are FCP7 generated files after I convert them to ProRes.
Whenever I try to import/use the files in anything other the original project they are grey'ed out.
I'm also confused on how to import effects plug-ins I've downloaded effects from apple only to have now directions to import them into the program.
Sorry for the Noob questions I'm a film student learning FCP7 by myself so I have the upper hand come next semester. Thanks in advance.Can't tell for sure but it sounds as if the drive is not properly formatted, or you do not have correct read/write permissions for it. There is no way you can use this drive with HQ video. You're going to get into problem if you even try.
-
i forgot my security question and it won't let me buy any songs but whenever i go to manage my apple id it says i need to tell the answers to the security questions but i don't know them someone please help
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
(96813) -
Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHzMost of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode? -
I forgot secret questions to enter the account But I know the PIN number to my account I need to help me put back on the questions and answers them
Your brother Mohammed Al-GhamdiSee Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
NOTE:
It is not wise to post personal information on a Public forum. I have asked the Hosts to remove your Account Details and Phone Number. -
Need to know how to reset my security questions.
Need to know how to reset my security questions.Can anyone help plz.
1. See my User Tip for some help: Some Solutions for Resetting
Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contacting Apple for
support and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane -
I need to know how to change my security questions cause I have forgotten them and would like to buy an app but cannot cause I need to answer the questions
The page that you’ve posted from has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
I need an Email I can contact for itunes questions that are for apple.
I need an Email I can contact for itunes questions that are for apple. Please post one I will greatly appreciate it. Thanks.
iTunes is a free program consequently any support is via these user forums or the on-line documentation. Apple do not provide free technical support except for purchased products. They don't provide email support for iTunes.
If you post your questions and/or any problems giving clear details of what you are attempting to do and any error message(s) you are getting etc. I'm sure someone here will be happy to help. -
Need to restart samba to access a shared folder
So, that is what happens to me just now, i have to restart samba once the system boots up so i can access any share.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
map to guest = Bad User
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;hosts allow = 192.168.5. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
guest account = nobody
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
;[homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
;# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
[Shared]
path = /home/Shared
available = yes
browsable = yes
public = yes
writable = yes
[Multimedia]
path = /home/Multimedia
available = yes
browsable = yes
public = yes
writable = yes
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
I use networkmanager, and samba is the last daemon to start....Hi I have exactly the same problem. I'm pretty sure that somehow is related with the hardware of the computer, as only one of my computers seems to be affected by this problem. I'm I a networkmanager user. I have solved the issue by taking away samba from the daemons array in /etc/rc.conf (in fact I putted a ! in front what is the same). An the following the suggestion up. I have made a script "/etc/NetworkManager/dispatcher.d/30_samba":
#!/bin/sh
INTERFACE=$1 # The interface which is brought up or down
STATUS=$2 # The new state of the interface
case "$STATUS" in
'up') # $INTERFACE is up
exec /etc/rc.d/samba start
'down') # $INTERFACE is down
# Check for active interface and down if no one active
if [ ! `nm-tool|grep State|cut -f2 -d' '` = "connected" ]; then
exec /etc/rc.d/samba stop
fi
esac
as indicated in wiki networkmanager and pointed above. Finally, I set the permission for "30_samba" scrip to 755 and the ownership to root:root. Now it works.
Note: If I leave the samba daemon in the array or background it I get a weird problem as only the nmbd but not smbd in up after reboot.
I hope it helps to others. Still I found very weird this behaviour. It has been going on for a long while with this computer although I was lazy to dig in the reasons until now. I will really appreciate if someone more skilful could have a look to the problem.
Last edited by hseara (2011-10-30 10:55:13) -
2 Partitions needed in Tiger: Mac and Windows
I just bought my nephew a verbatim 320G external hard drive for the iBook G3 laptop that I gave him (the internal drive is way too small). He has Mac programs that we bought for him and he needed a bigger hard drive to install them on.
Now he tells me that he'd like to also use part of the Verbatim hard drive to back up his Windows laptop that's using Vista.
How can I partition this Verbatim drive to have a Mac partition AND a Windows Vista Partition both on the same hard drive in Tiger? Can it be done, and how?Yes it can, In Disk Utility just Partition it then make one Mac OS Extended, the other MS-DOS.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930 -
Need opinion : Tiger Server running on PowerMac G4 (AGP Graphic)?
Dear Gurus,
I have a spare PowerMac G4 (AGP Graphic) with 2GB RAM, and a spare copy of 10.4 Server. Is it reasonable to install Tiger Server into this PowerMac? The computer will serve as a file server for about 20+ user (mostly documents, no video or gigabyte psd file).
The machine meet Tiger minimum system requirement but I need some real life opinion of whether this is okay, or just a bad idea (system will sluggish, etc, etc.)
TIAServer doing File Sharing is an I/O problem, not a compute problem. I have run Server 10.3 on a Beige G3 \[with a SCSI RAID added].
You need fast Hard Drives and a fast (preferably Gigabit Ethernet) connection to the workstations to get "near Hard Drive" performance. -
Need NEW Tiger on Ti G4 and its not available
I need to run Photoshop CS3 and open files from NIKON DSLR RAW NEF and I have 0S 9.2, and Fry's San Diego computer store say it will not run on my Titanium the new OS X.v10.5 and APPLE store dont sell TIGER, where can I buy it new, Thanks
I already bougth a new HD 80G and 1 GigaRAM
Thanks
Yours truly
David Aleman JrMake sure you purchase the retail version of Tiger which looks like:
And doesn't say update, upgrade, or dropin.
These resources may have it*:
http://www.macmaps.com/usedrefurbished.html
- * Links to my pages may give me compensation. -
Greetings! I would be most grateful if someone out there in Mac OS X Tiger land would email me a Tiger file! Actually, it's a folder that I need because the Snow Leopard version (which I'm running) is not compatible with aTV! Here's the address to locate the specific folder: /System/Library/Frameworks/CoreAudioKit.framework I need that whole CoreAudioKit.framework folder. If anyone would be willing to send me this folder/file, please post here saying you did, so I don't get a bunch of these. Or, if anyone knows where I could retrieve this specific file from Apple or Apple Support, please enlighten me! Again, Thanks & God Bless!
Howdy Evangelist
Well, after reading & rereading your post I wasn't sure just EXACTLY what you needed, but here ya be..... My contribution to a fellow Different Thinker. <g>
Use it if you can (but please notify me if you do DL it so I can dump it when you're done - thx):
*http://www.box.net/kevinkendall-public*
In that folder you'll find 2 files:
1. ishot13.jpg (319KB): A screenshot of a Finder window showing the paths leading to the folder I believe you're looking for (for your own verification).
2. CoreAudioKit.framework.zip (64KB): The zipped-up folder you need. (tiny bugger....)
NOTE about that CoreAudioKit folder: Within that folder are several aliases; however, I checked them all out & they all point to their originals as things that exist within that very same folder. Makes no sense to me, but I'm sure there's some kind of reason for that.....
And BTW, my current sys is a PPC Titanium PB with 2 busted hinges (dammit. did that recently.) running the Tiger 10.4.11 sys maxed out with all that Tiger can handle, plus all the sec updates up to 008, if that means anything to ya.
(Somewhere out there though, a maxrammed white MacBook Pro's got my name on it.....)
hasta
good luck Evang -- and Happy Holidays!!
Kevin Kendall
Recently reconverted MacHead after too many years between Macs, wasted dinkin' around with The Dark Side's Frankenstein machines.
<edited by host>
Maybe you are looking for
-
SAP BPC 7.5 NW SP09 - full optimize never ends. Job can not be stopped
Hi experts, we sent a full optimize process in order to compress an application but it never finished. I noticed that through BW transaction RSPC the process chain: Full optimization stops in "Collapse box" step and become red. so the cube were locke
-
I updated my iphone 4 to ios7.04 in itunes. In itunes, it appears that all my data/apps/music/etc are on the phone (but I cannot see anything on phone itself except setup screens). I am getting the ios7 setup screen on my iphone. I have selected
-
Can I now delete/uninstall Logic Pro 9 safely now that I have Logic Pro X?
Is it ok to delete the application Logic Pro 9 now that X is installed without affecting anything?
-
Outlook Contacts Sync - Partial SOLUTION to error (-50)
Im using Outlook 2003. Was getting the error (-50) while trying to sync contacts to my iPod. I resolved it by: - Go to the Outlook Contacts View - Go to File -> Folder -> Sharing -> Outlook Address Book - Click the check box for "Show this folders as
-
Hi ,thanks a lot for reading this. I would like to create a java class which can perform addition ,namely this program should return the sum of two integers. Then another java class should use the previous one in order to add couples of integers. I k