In SICF, ICMAN not active
Hi All,
In SMICM, ICM Status is showing as Running. When we test the ICMAN service in SICF is gives an error "ICMAN NOT ACTIVE".
Instance Profile Parameters ( RZ10) for icm are as follows :
rdisp/start_icman true
icm/max_conn 700
icm/HTTP/j2ee_0 PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
icm/max_threads 100
icm/plugin_0 PROT=HTTP,PLG=D:\usr\sap\cc5\SYS\exe\run\httpplugin.dll
icm/min_threads 50
icm/server_port_2 PROT=SMTP, PORT=1025
icm/server_port_1 PROT=HTTPS, PORT=1443
icm/server_port_0 PROT=HTTP,PORT=1080
Following are the errors showing in trace file dev_icm :
[Thr 11912] *** ERROR => NiPBind: bind failed (socket=131160) (0: No error) [ninti.c 942]
[Thr 11912] *** ERROR => NiIBind: service '1080' (1080) in use [nixxi_r.cpp 3860]
[Thr 11912] *** ERROR => NiIListen: NiBind (rc=-4) [nixxi_r.cpp 767]
[Thr 11912] *** ERROR => IcmBindService: NiBuf2Listen failed for host dlwsdv11:1080 (rc=-4): NIESERV_USED [icxxserv.c 1549]
[Thr 11912] ISC: created 400 MB disk cache.
[Thr 11912] ISC: created 50 MB memory cache.
[Thr 11912] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
[Thr 11912] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=1, flags=4101) for /:0
[Thr 11912] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=2, flags=1077253) for /:0
[Thr 11912] =================================================
[Thr 11912] = SSL Initialization on PC with Windows NT
[Thr 11912] = (640_REL,Jul 16 2006,mt,ascii,SAP_UC/size_t/void* = 16/32/32)
[Thr 11912] SapISSLComposeFilename(): profile param "ssl/ssl_lib" = "D:\usr\sap\CC5\SYS\exe\run/libsapcrypto.so"
resulting Filename = "D:\usr\sap\CC5\SYS\exe\run/libsapcrypto.so"
[Thr 11912] *** ERROR => DlLoadLib: LoadLibrary(D:\usr\sap\CC5\SYS\exe\run\libsapcrypto.so) Error 126 [dlnt.c 237]
[Thr 11912] Error 126 = "The specified module could not be found."
[Thr 11912] *** ERROR => secudessl_LoadLibrary(): Unable to load "D:\usr\sap\CC5\SYS\exe\run\libsapcrypto.so" [ssslsecu.c 352]
[Thr 11912] *** ERROR => Loading of SSL library failed -- NO SSL available!
[Thr 11912] =================================================
[Thr 11912] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
[Thr 11912] *** ERROR => IcmAddService: SapSSLInit (rc=-1): SSSLERR_LIB_NOT_FOUND [icxxserv.c 348]
[Thr 11912] Sat Jul 26 10:52:05 2008
[Thr 11912] Started service 1025 for protocol SMTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeou
[Thr 10492] IcmJ2EEScheduleFunc: WARNING: no HTTP and HTTPS service defined - URL Prefix Table not loaded from server
[Thr 11912] Sat Jul 26 10:52:14 2008
[Thr 11912] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 9 seconds [icxxtool.c 1065]
[Thr 11912] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c
[Thr 10188] Sat Jul 26 10:53:50 2008
[Thr 10188] MPI<3>0#4 Peak buffer usage: 2 (@ 64 KB)
Please guide me on this.
Appreciate your help.
Thanks,
Chandravadan
Hi
Check for HTTP/HTTPS service status:
go to transaction SMICM
SMICM->goto->services
do you see HTTP protocol is maintained and active?
Also check this link for various ICMAN related issues
http://help.sap.com/saphelp_nw04/helpdata/en/ba/435e096b42724bbcef709fd4c32a85/frameset.htm
Similar Messages
-
ICMAN not Active error in SICF
Hi All,
I am working with Consuming Webservices. I am working on ECC 5.0 system.
In SICF when I have activated following services :
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/default_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/default_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
But when I am testing any of the services I am getting an Error message "ICMAN not ACTIVE" in SICF.
This happens even after /default_host/sap/public/icman is activated using context menu 'Activate service'.
Please guide me in this.
Thanks & Regards,
Ankurcheck this link.
http://help.sap.com/saphelp_nw04/helpdata/en/ba/435e096b42724bbcef709fd4c32a85/frameset.htm
if problem still persist, do get back.
Regards
Raja -
Error : ICMAN not Active
When i try to test a HTTP service it says ICMAN not Active. I am trying to upload a photo of an employee, thru transaction OAAD it says 'HTTP Plugin not Active'
Hi, Test your content repository server using TC - SICF also check its up and running using TC: CSADMIN.
(you might require basis help for this) -
Hello,
There is a strange problem in my ECC5.0 system. When I enter SICF and try to test one of the services (no matter what) I get error: "ICMAN not active"
icman service is active, I've tried to restart it but I still got the error I mentioned above.
Any ideas ?
Please Advice,
Dimitry HaritonovHello Dimitry,
can you please check wether the parameter:
rdisp/start_icman = true
has been set up?
If yes: go to Tr. SMICM -> GOTO -> SERVICES
are the HTTP (and eventually HTTPS) services active?
Regards,
Dezso -
Hi,
after an upgrade from ERP2004 to ERP2005 I find that my BSPs are displayed (and enabled) but nothing happens when I press buttons and some MIME objects are not displayed. Have I missed something in SICF? What could be the cause of this problem?
Thanks.
/ElvezHi all,
this was an easy one. Some default_host->sap->bc services were not activated. After activating these services everything worked fine.
/Elvez -
Message Mapping : ( Not Activating )-Main Exception in thread "main"
Hi all
I have configured a message mapping , with proper occurence checked for
both source & target MesTypes.
But on activation it is throwing the error :
<b>java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"</b>
Also my previous mappings are also not activating , which were running properly previously...
i tried these option already :-
--> i also restart the Java Stack...
---> Re: JAVA stack not starting
> SAp note 928038
still i am getting the same error..
Regards
Ashutosh RawatAshutosh,
I am not sure weather it will resolve your problem but you can give a try to it.
If you have the access for tcode "<b>SICF</b>" then
1. Run tcode SICF, and press F8 button.
2. default_host>sap>xi.
3. Now check the below mentioned are activated (activated services will be in black) or not, if not then just right click and activate the service:
i). adapter_plain
ii). cache
iii). cache_gui
iv). cache_ssl
v). docu_apperror
vi). docu_syserror
vii). engine
viii). simulation
Regards,
Sarvesh
Message was edited by:
Sarvesh Singh
<b>SFIC</b> is corrected to "<b>SICF</b>" -
Hi Experts,
Please check this Developer Trace of Dispatcher, this is stopped, when I am restarting my server, it is giving errors :
running but not connected to message server,
and
running but dialog queue standstill, J2EE service unavilable.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid XID
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 1412
Fri Sep 21 10:19:59 2007
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 1412) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Fri Sep 21 10:20:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >inggnh002sap_XID_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06510040, size: 4607512)
DpShMCreate: allocated sys_adm at 06510040
DpShMCreate: allocated wp_adm at 06511E28
DpShMCreate: allocated tm_adm_list at 06514FA8
DpShMCreate: allocated tm_adm at 06514FD8
DpShMCreate: allocated wp_ca_adm at 068DA570
DpShMCreate: allocated appc_ca_adm at 068E0330
DpShMCreate: allocated comm_adm at 068E2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06963130
DpShMCreate: allocated gw_adm at 06963170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069631A0
DpShMCreate: allocated wall_adm at 069631A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1324
argv[0] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2009
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=XID
argv[7] = -DSAPMYNAME=inggnh002sap_XID_01
argv[8] = -DSAPPROFILE=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
Fri Sep 21 10:20:05 2007
***LOG Q0K=> DpMsAttach, mscon ( inggnh002sap) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >inggnh002sap_XID_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Sep 21 10:20:06 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Fri Sep 21 10:20:41 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1492
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2014) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1324)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Sep 21 10:20:45 2007
ERROR => W0 (pid 2804) died [dpxxdisp.c 14021]
ERROR => W1 (pid 1484) died [dpxxdisp.c 14021]
ERROR => W2 (pid 2708) died [dpxxdisp.c 14021]
ERROR => W3 (pid 1464) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 860) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 2964) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2508) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 3840) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 1072) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:20:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Sep 21 04:50:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2804 Ended no 1 0 0
1 DIA 1484 Ended no 1 0 0
2 DIA 2708 Ended no 1 0 0
3 DIA 1464 Ended no 1 0 0
4 UPD 860 Ended no 1 0 0
5 ENQ 2964 Ended no 1 0 0
6 BTC 2508 Ended no 1 0 0
7 SPO 3840 Ended no 1 0 0
8 UP2 1072 Ended no 1 0 0
Dispatcher Queue Statistics Fri Sep 21 04:50:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Sep 21 04:50:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Sep 21 04:50:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >inggnh002sap_XID_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (776) (SOFT_KILL)
Stop icman
killing process (2780) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:776 HANDLE:1572)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:776 HANDLE:1572)
wait for end of icman
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2780 HANDLE:1576)
[DpProcDied] Process died (PID:1324 HANDLE:1556)
DpStartStopMsg: send stop message (myname is >inggnh002sap_XID_01 <)
NiIMyHostName: hostname = 'inggnh002sap'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Sep 21 10:21:13 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11698]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1516 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1516 (pos=3)
SiSelNRemove: removed sock 1516
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1516
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1412) [dpxxdisp.c 10087]
Good Bye .....
Please Help, it is urgent,
Regards,
Study SAPHi Kaushal,
Thanks for your reply, there are many files with dev*.
Please check the log from file dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Sep 21 10:37:39 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 01
M sid XID
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3588
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3588) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Fri Sep 21 10:37:40 2007
M DpShMCreate: sizeof(wp_adm) 12672 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06510040, size: 4607512)
M DpShMCreate: allocated sys_adm at 06510040
M DpShMCreate: allocated wp_adm at 06511E28
M DpShMCreate: allocated tm_adm_list at 06514FA8
M DpShMCreate: allocated tm_adm at 06514FD8
M DpShMCreate: allocated wp_ca_adm at 068DA570
M DpShMCreate: allocated appc_ca_adm at 068E0330
M DpShMCreate: allocated comm_adm at 068E2270
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06963130
M DpShMCreate: allocated gw_adm at 06963170
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 069631A0
M DpShMCreate: allocated wall_adm at 069631A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host inggnh002sap
M
M Fri Sep 21 10:37:41 2007
M calling db_connect ...
C Prepending D:\usr\sap\XID\DVEBMGS01\exe to Path.
C
C Fri Sep 21 10:37:47 2007
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06AAFCF8 06AB5294 06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:48 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06AAFCF8 06AB5294 06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:49 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server inggnh002sap_XID_01 on host inggnh002sap (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Sep 21 10:37:49 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3588) [dpnttool.c 327]
Regards,
Study SAP -
Hi all,
We are currently implementing Performance Management using Appraisal (MBO).
I have created a template that works fine in the R/3 backend but are having problems displaying anything via BSP - we are at 4.7
I have activated all BSP sites in transaction SICF and in SE80.
When testing the BSP Application hap_document via SE80 I get an empty page containing the message 'Service is not active'.
Does anybody know what I could have missed (is it not enough to just activate via SICF)?
Best regards
Ronnie NielsenHi Bernd,
The service is now active and I'm now able to test a BSP page (HAP_DOCUMENT).
This just creates a new problem.
When trying to create a new Appraisal document I'm presented with a list of appraisal templates that we have created.
When I click on create the system just waits for 60 sec. and then returns with time out.
Does anybody know which parameter we have to chang in order to increase the amout of seconds?
Best regards
Ronnie Nielsen -
Log on ticket not activated on the server
Hi all
When i tried to test compont crm_ui_frame,using transaction code bsp_wd_cmpwd,it opens the url
Where in, i am not able to enter user name and password, those fields are gray out. System seeking the fallowing errors:
1) . sso log on not passable, log on ticket not activated on the server.
2).No switch to https occurred so it is not secure to send a password. for which i try to activated the profiles using transaction code:RZ10. the fallowing profiles are
Login/accept_sso2_ticket=1, login/create_sso2_ticket=2. While doing this i am getting errors, so i could not able to activate those profiles. The following errors are
E: login/accept_sso2_ticket not a logical value 1#.
W: unknown parameter. Start up/ trimming_propertics, a check cannot be performed.
W: unknown parameter. Start up/um/home, a check cannot be performed.
W: unknown parameter .start up / max_coches, a check cannot be performed.
E: jstart up/ instance_propertics file D:\usr\sap\c27\DVEBMGS00\J2EE\cluster\ instance.
E: Exe\j2ee.file D:\usr\sap\c27\DVEBMGS00\exe\ jcontrol.exe .does not exist.
Hence, please help me in this regards, and for your kind information, i have crm2007 and TREX servers both are on single machine, and i do have DNS server connected to my system.
Regards
padmarao.Hi,
>E: login/accept_sso2_ticket not a logical value 1#.
Check if the value is really "1" and not "1#".
I have these parameters set on my CRM 2007 system and the saplpgon ticket works fine.
>2).No switch to https occurred so it is not secure to send a password. f
You have to activate HTTPS for the ICM and you have to choose "Logon via HTTPS" for the
/sap/crm_logon service in SICF.
Regards,
Olivier -
My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.
Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden -
In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...
Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.
-
Error: "Component is not active" but component is active
Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
TanHi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM -
Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidarthaHi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak -
Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL
Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran <b>RS_TRANSTRU_ACTIVATE_ALL</b> program but still in the job log finding some problems like <b>0BP_RELTYPES_TEXT</b> is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
AkileshHi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy. -
Material ledger is not active in valuation area C002
Dear All,
I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
regds,
KalluHi
For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
Why we need Material Ledger?
A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
valuations.
Material inventory values are normally carried by the SAP system in one currency. The material
ledger component enables the R/3 System to carry inventory values in two additional
currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
historical exchange rates directly at the time of posting. Businesses such as those in highinflation
countries can therefore carry their inventories in a more stable currency (such as US
dollars). This reveals inflationary effects on inventory values.
If you use transfer prices to represent value flows in your company in different
valuation views, you must use the material ledger. This allows you to carry your
inventories in three different valuations (legal valuation, valuation for reporting
purposes, and profit center valuation).
Before activating the material ledger, make sure you know which currencies and valuations
you want to use, because you cannot go back and change the setting.
Activating the material ledger is a prerequisite for using multiple valuations.
Thanks
Raman
Maybe you are looking for
-
How hp laserjet 8150 series pcl can pick from tray any paper size automatically
hi,am using hp laserjet 8150 series pcl and initially tray 2 used to pick a4 papers automatically.i need any of the trays to pick customised paper of 7inches by 11.7 inches automatically
-
Hi I'm trying to create a new web form for people to subscribe to a newsletter. I just want the form fields to be name and email but I can't seem to work out how to remove the title and the first name any ideas? thanks Tim
-
Canon 7D MRaw files not recognized by PS Elements 8 on Mac OS X
Canon 7D MRaw files are not recognized by PS Elements 8 on Mac OS X. After I installed CR 5.6 I can see MRaw files in Bridge CS4, but the files still do not open in PS element 8 Can anything be done to fix this?
-
Blue tooth issues with macbook pro late 2011
I purchased the new beats pill and havinng issues with connectivity with macbook pro. My Iphone works well. Any suggestions
-
Whenever I go into the Flickr app on my iPod Touch 5th Gen it always crashes about 3 seconds later. I think it may be overloaded because it didn't do that before when I didn't ask it to upload 8 photos! Please help.