Incoming emails not visable,cannot see Subject - from or date

in only 1 of my 4 accounts emails come in but are not visible to view Subject From and Date there are just bars across the field.
However in the lower preview section the full email is visible how do i fix this
I tried folder repair with no luck.
The computer is running windows 8
Thunderbird version 31.5.0

right click the folder, select properties and then the repair button, and we will see what is recovered.

Similar Messages

Inbox preview problem - cannot see subject, from, date etc but can read emails..

Hello All
I am using Thunderbird on a Mac, this problem began yesterday.
The preview section of my inbox is not showing that is things like subject, from, date etc all I am seeing is blank rows but I can still click on these rows to see my messages.
I have attached a screenshot to show the problem, I am quite baffled by this.
I am running 4 inboxes but only this one has the problem, it is through imap, (screenshot attached of the inbox properties)
Any help would be greatly appreciated.
Thanks

I found another thread that had userChrome code in it that I was able to modify how I wanted it. :)

I backup Lightroom 5 and now I cannot see "Basic" from my develop module

I backup Lightroom 5 and now I cannot see "Basic" from my develop module! Help!

Right-click on any other panel tab and make sure they are all checked.

Airdrop not working (cannot see nearby machine)

I cannot see any icons of my nearby machine going from my Macbook Air (2011) with Yosemite to a new Air with Yosemite. (Nor the reverse)
Both wifi and BT are enabled. What else needs to be done to prepare for transfers.
I've scoured the internet. Every site just says to start by dropping on the icons. But I have none to drop on.
(On the second machine it at least asks me to enable users from contacts, etc. ON mine nada)
thanks in advance

Hello there, jinet.
The following Knowledge Base article provides some great information that helps when troubleshooting issues with AirDrop and not seeing other devices:
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
Don't see who you're looking for?
When you select AirDrop, OS X looks for other Mac computers and devices that are nearby that also use AirDrop. If you don't see someone in the AirDrop window, here are some things to check.
Preventing senders
You can prevent people you don't know from sending you files, or you can allow everyone. If you don't see a recipient in the AirDrop window, they might only accept files from people who in their Contacts list. Ask them to add you in their Contacts app, or have them select the option "Allow me to be discovered by: Everyone" in the AirDrop window.Sending files to and from an older Mac
If a Mac you're using with AirDrop was manufactured before 2012, you can send and receive files with other Mac computers.
On the sending Mac, click "Don't see who you're looking for" in the AirDrop window.
Select the option to "Search for an Older Mac."
On the receiving Mac, open a new Finder window and click AirDrop in the sidebar.
Tips for sending files
Make sure Wi-Fi and Bluetooth are enabled on your Mac and your iOS device. Although you don't have to connect to a specific network, Wi-Fi needs to be on to send and receive files using AirDrop.
Move your devices closer together. AirDrop is designed to work within a range of approximately 30 feet (9 meters). If you need to send a file to someone farther away, consider using File Sharing, iCloud, or email instead.
If you're using a firewall on your Mac, you won't be able to receive AirDrop files if you have enabled "Block all incoming connections" in the Security & Privacy pane of System Preferences.
Make sure your devices meet system requirements for AirDrop.
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Only Incoming emails not being received on Mac Mail

Hello,
I am able to receive incoming emails on my Blackberry as well as my Webmail, but since a couple of days, my incoming Emails are just not being received on my Mac Mail, specific to 1 Account only. I have multiple accounts on my Mac Mail.
Please assist.

Hello Shadab333
Start with using Connection Doctor to see if there is anything that is preventing it from receiving email. Depending on the settings of that email address in Mail you may not receive them once they have been checked elsewhere. Check out the article below to troubleshoot the issue further.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Regards,
-Norm G.

Macmail/ntlworld incoming email not working

I cannot get Macmail to receive incoming emails from my ntlworld.com email address for about a week, though gmail is fine. I did not change any settings but broadband went down about a week ago and though now ok this feature does not work properly.

I cannot get Macmail to receive incoming emails from my ntlworld.com email address for about a week, though gmail is fine. I did not change any settings but broadband went down about a week ago and though now ok this feature does not work properly.

Sharepoint Foundation 2010 incomming emails not delivered to library

Hello
we run a SharePoint 2010 Foundation server and an Exchange 2010 Mail Server. I want to add incoming-email-support to a SharePoint Library.
I have installed and configured SMTP Server on the local SPF, enabled incomming email support on SharePoint via Central Administration, here I have specified the respective drop Email-Folder. Have added a new send-connector on Exchange in order to forward emails
to the SharePoint SMTP (while SMTP and Sharepoint is the same host)
I also have configured the Email-Settings on the library settings, configured a email-address, allowed to recieve email from any sender via Library Settings / Incomming-Email-Settings. Nevertheless the sender is a AD Member of the same Acrive Direcotry whom
I gave contributor permissons to this site and library. It is a document library.
While I send an Email to the resp. library this one is delivered via Exchagne to the SMTP server, put into the drop folder. From there it disapears very soon, obvioulsy it's beeing picke dup be the Timer Service. But the Email never arrives into the document
library in charge. Actually I have no idea where the emails went without leaving a trace once they have been picked by the timer service from the drop folder of the smtp server. Actually I don't know for sure who pickes up the emails, but I can tell that they
disapear after just a few minutes or secons from this folder where they can be found as .eml for the time beeing.
Any suggestions where to search, where to look into some log-files etc. are highly appreciated.
Thanks in advance

Hello,
For those still looking, you should ask on the
SharePoint forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Friends cannot see response from the iphone 5

When I send group messages from my iphone, my friends cannot see them. I can see my responses and theirs on my iPad/computer, but they are unable to see my response from the phone. Am I missing something.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Incoming Email not functioning

Hi All,
Our incoming email functionality is not working in the CRM workflow. The outgoing is working fine. When we tried to send through Business workplace, this is wht we are getting in the outlook:
The following recipient(s) could not be reached:
ggggggg.xxx on 10/5/2008 1:01 AM
Could not deliver the message in the time limit specified. Please retry or contact your administrator.
<hhhhhhh.xxx #4.4.7>
Anykind of help will be appreciated.
Thanks

Yes the email is rejected by SAP.This used to work..it stopped from last 3 weeks...we thought might be problem in exchange and checked it..the screen shot given consists the user name which is entered in Inbound distribution in SCOT. Yes the e-mail address is in the format userid@sapserver. I did not hear about processing class so50 but i found that there is an aesterik (*) entry in the recipient address. The way is tested is.. i went into SBWP T-CODE and sent email to the userid@sapserver and it bounced back into my outlook saying
userid@sapserver*
*Could not deliver the message in the time limit specified. Please retry or contact your administrator.*
*<aaaaa.yyyyyyy.xxx #4.4.7>*
, Could you please guide me more on this.
Thanks a lot

Incoming Email not showing up in business context

Hi,
We route incoming emails through ERMS to a service org. Then through the inbox, we select email and click on 'interact' button to create a service ticket manually. We notice that email does not show in the business context during the interaction but shows up after we click the end button and come back and look at the service ticket again..This works for us in older CRM 5.0 release but is not working in CRM 7.0. Any pointers on the issue? How can we make the email to show up in the business context during the current interaction. Please note that we do not create a separate interaction record for each interaction. Service ticket is our interaction record for interact purposes..
Thanks
Dan

Hello Dan,
Can you please check SAP note 1336278 : ERMS not creating doc flow between IR and ST - Part II, this might help!
Please award points if this pointer helps!
Regards
Lata

Incoming emails not syncing using IMAP

Hello Community Members,
I am having a problem with one specific email not syncing incoming emails using IMAP on my BB Classic.
IMAP server: imap.secureserver.net
I have followed the instructions and all the other accounts I have configured seem to work properly.
Downloading using POP works for this specific email.
Anyone experiencing similar problems? Any advice?
Thanks,
Alan

Hi and Welcome to the Community!
It is possible that your email server did not, as part of the "wizard" configuration, provide the proper settings to auto-configure to the device. Therefore, I recommend you:
Remove this email configuration
Find the proper settings to use, via the EAVT or perhaps by asking your email service provider
Reconfigure this email, but use the manual/advanced screens and manually enter everything, bypassing the wizard
Hopefully that will work for you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Incoming email not working properly

Since updating to iOS 8.3.1 my incoming emails are not coming through until I click on them, previously they would come through as and when they were sent. I didn't think I had received any today but when I touched 'mailbox' I suddenly found I had 8 emails Waiting for me.

Try to go into the settings, mail, contacts and calendars. Delete your mail account. Exit out, go back in and re-add your mail account.
Sometimes the update messes things up and starting over is usually the easiest way to fix it.

After accepting a meeting invitation through an email attachment, I cannot delete it from my calendar. There is no edit function

After accepting meeting invitations I cannot delete them from calendar. Edit function does not appear.

settings - icloud - calendar - ON

Mac Mail incoming email not loading when on home cable broadband

I'm having a new problem (started happening just 2 night ago, for no apparent reason). Incoming emails no longer working on any apple device (iPhone 5, iPad, MacBook Pro) when connected to my home broadband wireless modem (cable, netgear cg3100d). This is despite all devices accessing websites without any issues, and speedtest showing 32mbps when connected to this modem. When I take any of these devices to connect to my work's wireless internet connection the mails load fine. Likewise if i switch off wifi on the phone and use the 3G or 4G the emails load.
What could be the cause since I haven't changed any settings? I'm nowhere near my monthly download limit either.
I've also noticed that Apple TV loading content has slowed right down. This seems to be related since it has occurred at the same time. Strange that only email and Apple TV is affected. Websites all load fine and at full speed.
Any thoughts?
Thanks in advance.

Hi Timdk,
The port settings for mail.bigpond.com changed a few months ago and this is starting to be enforced. Please check your settings against those in the table on this link: https://go.telstra.com.au/helpandsupport/-/email-settings-summary
I would suggest performing a factory reset of the modem via the interface http://192.168.0.1 and you will find this option located under Set Password in the left hand menu.
Once done, test it again and let us know how you went

Incoming emails not visable,cannot see Subject - from or date

Similar Messages

Maybe you are looking for