Increasing bounce volume in Logic

Noobie question here, but why is it that when I increase the overall volume of my track in Logic, whether it be from a compressor or limiter, it never sounds louder when I bounce it and play it back in iTunes? I'll add adaptive limiters and comprressors and it obviously sounds louder within Logic, but once I bounce it out, it doesn't sound any louder than other versions I bounce without the compressors and limiters. I know Pro's have tons of equpment and years of experience and really I'll never be able to get it to sound like their stuff, but shouldn't it get at least a little bit louder?

Make sure Normalize is off in the bounce dialog.
Also, make sure ALL of the iTunes (audio enhancement) features are turned off.
Including: Sound Enhancer and Sound Check.

Similar Messages

Increasing headphone volume in Logic??

How do I increase the volume coming through my headphones via my M-Audio Audio Interface while using Logic? The volume is cranked on the AI unit (for headphones), the recording levels are OK (not awesome), but the volume through the headphones is POOR.
I go through my computer headphone outs directly when using Garageband (and the sound is AWESOME), but can't seem to do this with Logic. Nor can I use the AI for monitoring with GB (not that I want to right now with the volume being so poor through the AI).
Any help is GREATLY appreciated.
Thx!!
J.
Preferred solutions (in order):
1. I can use my headphones through the Audio Interface for both Logic AND GB and the volume kicks ***
2. I use the computer heaphone out for both and the sound kicks ***.
3. I usethe AI sound for logix and the sound kicks ***, and I use the computer out for GB and the sound kicks ***.

open the software that you installed for the M-audio interface (you will find it in the applications folder) ...click on the output tab... there should be volume faders for the headphones...also check if the output routing is correct
Which M-audio interface are you using?
A

Increasing the Volume of a Garageband Recording in Logic Express 8

I'm new to Logic Express, but I'd like to use it to increase the volume of a multi-track recording that I made in Garageband. (Of course, there may be a way to increase the volume of the recording IN Garageband; however, if so, I don't know how to go beyond the 6 db level that seems to be the max for each track.) Here's what I tried to do: I imported the mixed-down, AIFF audio file that I made in Garageband into Logic Express and then I pushed the master volume slider to the maximum. I then saved and exported the file from Logic Express as another AIFF file (with a different file name, of course), thinking that the new recording would be louder. It wasn't. Any idea what I might try next? Thanks in advance for any help.

I've found an answer to my own question. I simply imported the recording that I made in Garageband into a new Garageband file and then turned up the volume. I'd still like to know how to do this in Logic Express, though, since I'd like to move to that more sophisticated program.

Need to increase output volume

I am recording a voice over and my audio is coming in at about -15db. After normalizing and using a compressor at about -5db, my levels peak between -5db and 0db. When i bounce down my track to an mp3 it is not coming out loud enough. How do increase the volume of my mp3? My mp3 will eventually be used on a website.

Hi EXP,
Before bounce, go to the "master fader" down, just above the click, select it,
Click and hold on Inserts arrow (or in the word itshelf) >logic express>mastering>choose the style you need.
This adds Gain, ChanEQ, Limiter, PresMultP, in a word, it's great for you to have a knolendge on how to do it.
Give it a try, in your case a only a Gain will do what you need, but play with the plug-ins to ear the diference for yourself or just bypass some.
best regards,
Jorge

Really low bounced volumes on mp3's

Hey again,
This has troubled me for a long time now, and to this day have never found an answer. I really get the feeling is a proper noob fail.
EVERY time I bounce a track from logic, be it to mp3 or wav/aiff, it's always considerably quieter than every other song in my iTunes library.
Is something to do with the normalize function? :s

Commercial recordings have been "mastered," which generally means heavy compression and limiting. Using the normalize function may increase the volume of your mixes, but probably not enough to sound like commercial CDs. Do some searches to learn about compressors and limiters and how they're used during the mastering stage--that should get you started.
Or, better yet, send your mixes to a professional mastering facility and be prepared to be amazed...
-James

IS THERE A WAY OF INCREASING THE VOLUME ON A USB DOWNLOADED WITH I TUNES? WHEN I PLAY MUSIC FROM IT IN MY BMW IT IS NOT VERY LOUD.

IS THERE A WAY OF INCREASING THE VOLUME ON A THUMB DRIVE DOWNLOADED WITH ITUNES MUSIC? WHEN PLAYBACK ON BMW RADIO, EVEN WITH THE RADIO VOLUME AT MAX, MUSIC IS NOT VERY LOUD.

Can't answer the query, since I don't use thumb drives and my volume's very responsive. That said, please don't post using ALL CAPS. That's considered shouting and is very disconcerting.

Whilst playing a selection from a CD I've put in my CD drive, I select Controls and then wish to increase the volume. It tells me to Press Control and then Up. Where is the Up button please ? Thank you.

My question is how do I increase the volume when playing a CD in iTunes. The volume slide is at full, but when I press Controls, it tells me to press Control and UP. Where is the UP on my PC or is it on the screen ??
Thank you.

It means the UP arrow on your keyboard. Depending on your keyboard, it is usually located on the right hand side of the keyboard, either with the numbers keys or below the Enter (Return) key.
However, Control/Up will simply attempt to move the slider in your iTunes programme further up. If the slider is already at the top, then those keys will have no effect, since the iTunes volume is already at maximum. Perhaps your computer's volume controls need adjusting.
In Windows XP, I believe (if I recall correctly) that the volume control is in Start/Accessories/ and either Volume or Mixer. In Windows 7, it's in Start/Control Panel/Hardware and Sound/Adjust Sytem Volume.

How do you increase/decrease volume on an iTunes song? Also, some songs get cut off before they are over.

This is in reference to Follow Up 286560206; under the control tab on "Libraries" the drop down indicates that a song can be increased in volume by pressing ctrl + up and decreased by pressing ctrl + down, but no matter how I try it nothing happens. Also, some songs get cut short, and once I saw an option on how to lengthen the play time on a song, but I can't remember how to get back to this screen. Thank you.

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

How do I increase voice volume on calls

Can anyone tell me how to increase the caller volume please?

If this is a new phone, make sure that you have removed the shipping plastic off the face of the phone.
To increase the volume, use the toggle switch on the side of the phone.

How do i increase call volume

I just got my IPhone 4S and cannot locate where to turn up the call volume, not the ringer volume, but actually increasing the loudness of the caller?

Hi Folks,
have had my iPhone 4 for the last week. I'm quite tired of people telling me to turn up the volume...it IS all the way up both using the buttons on the side and the slider...the picture tells me it is at max...I'm not deaf (yet) and the phone is CONSIDERABLY quieter than my Palm Pre. There is no plastic film over the earpiece. I have had six people in the last week say "yeah, that's the only drawback of an iPhone...but you'll get used to it." I'm not sure I'll get used to it. With so many skilled programmers out there, you would think with so many questions all over the web, we'd have an answer by now. I will pay the first person to send me a link to an app that actually increases the volume (amplifys the current in-call volume) to the volume of at least the Pre (not that great a phone or difficult a task...lots of music boosters out there, must be a way to boost the volume of the call), not using a head set, not using bluetooth, not using speakerphone: $50.00USD. No joke, this is really aggravating me!!! APPLE, PLEASE SOLVE THIS!!!
Ratch

How do I increase mic volume in new iPad

How do I increase mic volume in new iPad

There is no universal volume control in iOS 5 for the built in mic.
There are some external mics that can help.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

If that's the best you can do why don't you get on another forum?

How can i increase the volume of 6plus when make phonecalls

How can I increase the volume when I make the phonecalls. I already tried the normal method like press the slide volume button but it doesn't work.Is there any other methods to solve the problem?

Did you try that while on a phone call? Also there are different volumes for different devices. If you have your earbuds in and set a volume that will change the volume for when your earbuds are in. If you have a bluetooth headset you can set a volume for that.

Increasing disk volume on DB

Hi
I have oracle 9i Rel2 installed on a test environment machine, i need to IMP new data from the server but i dont have enough disk space (1 HDD, 2 partition C: & D:)
the DB is found on D: i am thinking of adding another disk and increasing the volume size of that partition.
or
if i copy all the oracle software from the partition and paste it on a newly installed HDD with drive letter D: (ofcourse i'll set a diff letter for the previous partition) would this work???
Any suggestions or ideas?
Thanks in Advance
Regards
Tony G.

Hi ...
It does not matter where is your datafile. It up to oracle server and its methodology to keeping the data in the datafiles. You just have to add a new disk space and create a datafile on that disk under the existing tablespace.
Thanks
Ali Mirza

How i can increase the volume when i playing a video? dont showing the volume control in the player..

how i can increase the volume when i playing a video? dont showing the volume control in the video player..

Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

Increasing bounce volume in Logic

Similar Messages

Maybe you are looking for