Installing Express HD issues...

I have a new G5 with Intel and OS 10.4.7. My current graphics card is the Nvidia GeForce 7300 or something like that. Will this card be able to handle Final Cut Express HD or do I need something else? Which card do most people recommend. (for animation and film-making purposes)

You CAN use FCE 3.0 but you will probably get an error message.
If you do, simply press "esc" and FCE will open.
However, as it will be working through the Rosetta emulation software it probably won't be as fast as using the purpose designed FCE 3.5.
Ian.

Similar Messages

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

Why doesn't my airport express router issue proper DNS server address to DHCP clients?

I have an Airport express router (version 7.6.4). It was configured to connect to internet via a cable modem, acting as a router with NAT. This means it obtians WAN address from cable modem, and in LAN it assumes IP address 10.0.1.1 as a gateway, and issue IP address to my 4-5 wireless clients (MBA, iPads, PCs) vi DHCP.
However I recently encounter an issue, that the router no longer issues DNS server address obtained from Cable Modem(206.x.x.x) but instead tell every DHCP client to use router ip address (10.0.1.1) as DNS server. I was pretty sure before Dec 2013 it is issueing (206.x.x.x) to all DHCP clients.
Apparently now the Airport express is acting as a DNS server or as a DNS cache. This works sporadically and very often result in long DNS look up or DNS look up failure.
Is this a bug or is it supposed to do so? Any configuration can turn it off so Airport express will issue Cable modem obtained DNS server to DHCP clients?
My network otherwise works fine. for some of the Clients (e.g. one MBA) I configured DNS for it mannually and it's internet is working very smoothly.

But this will be a problem for my ipad and iphone that uses wifi.
These devices either allow full DHCP. If you need to mannually enter DNS server, you will need to turn entire IP configuration to mannual and that will be a problem for me.

I Need Help Installing Expression 3.3

Hi my friends,
I want to install Expression 3.3 so I downloaded the installation program E33Mac370en.sit and tried to run it but it opens with "TextEdit" instead showing a bunch of nonsense stuff. It seems like the .sit file extension is not supported??? or my system doesn't have the application to run it.
What do I need to run ".sit" files in my iMac? Have someone installed Expression 3.3 before? Thanks!

Guitar Monster wrote:
Hi my friends,
I want to install Expression 3.3 so I downloaded the installation program E33Mac370en.sit and tried to run it but it opens with "TextEdit" instead showing a bunch of nonsense stuff. It seems like the .sit file extension is not supported??? or my system doesn't have the application to run it.
What do I need to run ".sit" files in my iMac? Have someone installed Expression 3.3 before? Thanks!
Many old PPC apps use .sit compression schemes.
Be sure you have an Intel version of Expression 3.3 if it exists. Product was discontinued some years ago so there is no support.

Swf express install ie 6 issue

http://tier3studios.com/pikecon/index.php
Hey guys...so i have a site with a swf that works fine on firefox and ie7+8 but when it comes to ie6 it keeps prompting for the user to "CLICK OK TO CONTINUE LOADING THE CONTENT OF THIS PAGE" this will be pretty anoying for the users. I have the latest flash version...
so how come this thing keeps asking that question? how can i fix it....I know the swf express install is for upgrading flash player but the prompt doesnt go away.
Another thing is my form on that page..im unable to click those text fileds and get a cursor...using ie6 and 5 ...it works well in everything above that..
Help?
Thanx

I fixed it thanx

USB Airport Express Printing Issues - HP Photosmart

Hi. When I connect my HP Photosmart directly to the iMac thru the USB cable, the Mac printer utility finds it, it can be added and all the utility software from the HP (like measuring ink levels, etc.) work fine.
When I connect it to the USB airport express port (so that I can print wirelessly from any computer in the house, and the Mac), I have issues. Funny, I have issues with the Mac only, not with the other windows computers (I installed bonjour for windows on the XP machines). But on the Mac, I just can't get the HP utility software to work fine.
Thoughts?

The HP Photosmart 7550 I know for a fact is not compatible with Mac clients via Airport Express. I wrestled with it for days.
Works fine connected via USB to the Mac.
Works fine via USB or Airport with Windows XP.
Does not work via Airport with Mac.

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Install Express Server 6.3.4 (8.1.7 / RedHat 7.3) problem

Hi,
Having trouble installing Oracle Express Server. During the install, it stops at 57% complete while copying DSBATCH.inf.
Any ideas?
TIA
Steve

Check the version of the ODBC driver you are using. This is probably the issue.

Logic Express Sync Issue

MAC G5 2.0 dual 1mb RAM Tiger Digi 002 Pro Tools 6.9.2
Last night I downloaded and installed the Logic 7 Express demo from
the apple site. After opening and setting up logic I opened a current
Garage Band file. It plays very slow and sluggish. Similar to when you
have the sample rate set incorrectly. I keep getting sample rate
errors but can't seem to get it corrected. I tweaked most of the
options under the synchronization menu to no avail.
Pro Tools still runs fine, but Garage Band now does the same thing.
What did I hose? If I use the internal sound drivers from apple all is
well. I feel the issue is tied to Digi's core audio drivers.
Any suggestions?
T.

Call apple support. You'll have to provide a proof of purchase and they probably will give you a new serial no.
Fox

[SOLVED] 64 Bit Install - Wireless / Kernel Issue

Hi All
I decided to install the 64 bit version of Arch from scratch instead of upgrading the existing 32 bit. I downloaded and attempted to install "Arch 2011.08.19 X86_64".
The first problem was that I couldn't get the wireless up and running. I did the usual:
cp /etc/network.d/examples/wireless-wpa /etc/network.d/talktalk
nano /etc/network.d/talktalk
netcfg talktalk
I edited the talktalk file to give it my ESSID etc. and usually when I do an install the network comes straight up, when I use "netcfg talktalk" - but not in this case. I got an error about there were no wireless extensions installed or something similar. I rebooted and noticed an error as the system came up:
b43 - phy0 Error: Found unsupported PHY (Analog 10, Type 8, Revision 1)
Obviously I looked into this and it seems it's a known problem; something to do with a mistake someone made in a unit in the kernel or something like that. A programming error anyway.
I then plugged my laptop straight into the router and installed via the wired connection instead and installed. I still have the problem even after "sudo pacman -Syu" upgrade. From what I've read it seems the way to get around it is to downgrade the kernel - documented here https://wiki.archlinux.org/index.php/Do … g_Packages - but I don't much like that idea. What happens when I subsequently run an upgrade? It will probably just fall over again right?
Anyone got an alternative solution? I had a look at upgrading to the Testing repo but obviously that has all sorts of potential issues which I don't want to have to spend the time resolving. For the time being I've fallen back to my 32 bit Arch system but it would be nice to know how to resolve the 64 bit issue.
Thanks for any help / suggestions
Rich
Last edited by RichAustin (2011-11-23 11:18:12)

tomk wrote:What broadcom chipset do you have? b43 is working fine for me here, with the current kernel and all recent ones. My chipset is BCM4318.
The chipset is BCM4313:
[richard@arch ~]$ lspci | grep -i net
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
I have absolutely no problem at all with Arch 32, it's only with the 64 bit install.

MSI 6600 pci express driver issue

Evening/Morning all.
Not sure if this would be considered a commen problem or just my luck?
Did the build last week of my current rig (details in sig) and am pleased with how well things are preforming. However I would like to know if anyone else has had issues with installing the nVidia drivers from the CD that comes included with the video card?
Basically I installed the motherboard drivers in order, made sure that was all nice and happy I inserted the MSI driver CD for the video card, the autorun kicked in with the "selection" screen. Went and clicked on the "install nVidia display drivers" bit of fun...and got Nadda thing. It sat there like a very pretty rock. I had to install the drivers the ol' fashion way via the system's hardware manager. Once done it still was'ent right, so I had to D/L the updated drivers from MSI...Un-install the video drivers I just put on...(real nightmare...it also removed several other drivers...as well as the display drivers..done via "add/remove" programs.)
Long story short (I know..to late) I had to re-install all the motherboard drivers AGAIN...and then did the setup of the D/L drivers from MSI. This time it seems to be working.. (have several other issues as well...but this one really was 'odd')
Is this something that happens from time to time? Meaning the CD flat out does'ent install when you click on the 'install' option???
I'd like to think it's the CD...but I also wonder if I missed something along the way. (other problems will be addressed in their proper area)
All Best
S-

This might be the best route. While I've normally have used the drivers from the motherboard makers websites? This is the first amd64 939 board I've had the unique pleasure to work with. The only thing that was a slight letdown was the benchmark.. 3Dmark 03. It only did slightly better then my other computer which my G/F is now using (amd2500+barton, Soyo KT600 ultra plat.)
This is my first run with PCI Express, so I'm still learning all of it's little 'quirks'. Such as trying to update the display drivers..and accidently nuking out the motherboard drivers at the same time. (Oppps)
6.6.9.3 seems to be the latest driver pack..and that's the one MSI listed. I'll keep my eyes open for any updates. When making a choice for updateing the drivers. Should I only use the ones that list PCI Express? I've noted a new(er) version on the MSI site but it did'nt mention PCI Express at all..So I went with the 6693 as it listed support for it.
Thanks!
S-

Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.

On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

Team Foundation Server 2013 Express licensing issues - error TF400409

We've installed Team Foundation Server Express 2013 update 3. When I go to a project/team and attempt to use the Backlog or Task Board functions under Work, or use the Team Rooms I get the following error message:
TF400409 You do not have licensing rights to access this feature: Backlog and sprint planning tools
TF400409 You do not have licensing rights to access this feature: Agile boards
TF400409 You do not have licensing rights to access this feature: Team Rooms
Are these features truly not included with the Express version of TFS or is something wrong with our install?

Hi Dave,
Thanks for your reply.
I checked and confirmed in TFS Express, as you said, there’s no the Access level feature in TFS 2013 Express Web Access, and TFS 2013 Express not support the backlog/sprint planning, Agile task board and Team room, it’s by design.
You can download VS 2013 document from
here, and check the Client Licensing Requirement for Team Foundation Server section in this document for more information.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

VMS new install - IP box issues

Installed my VMS and 2 IP boxes without issue. However, I am now seeing a problem between the IP boxes. I only have the 3 total units. While watching a channel on IP1, if I put the same channel on IP2, IP1 freezes, as if it were paused.
To correct the problem, I need to turn off IP2 then change the channel on IP1 to something different and then return to the original channel. Anyone else seeing this? We have to be able to watch the same channel on multiple TVs...

I did a bit of Googling after I've been working this issue for several hours straight, and it seems I have the dreaded "NF3 vs 6800" issue.
I have flashed the BIOS to clock the BFG 6800GT OC back down to 350/1000 and even went so far to push it back to 345/1000. I have turned fastwrites off, the hidden ATI/NV setting in the BIOS is turned off, I tried pushing the voltage to the card up to 1.6 and used NiBitor and RivaTuner to try and force the 2d/3d times to be the same.
Nothing worked. I'm still getting annoying "RGB pixilation" as well as periodic UI freezes for half a second. Called BFG and they said they knew of no issues, and after doing a bit of searching on this board, it seems to be an NForce vs. 6800 problem.
Has anyone got any other ideas before I go over to the darkside and purchase a VIA board?

Archive and Install/Disc Utility issues -

I'm currently spending a summer abroad in South America, and have had issues with my Macbook Pro (early 2011 version) no longer starting up after some virus experiences last week. The computer hangs itself during loading on the white screen w/ grey apple and the spinning dial. In contacts with Apple Care as well as some Mac-saavy friends, the following situations have been tried:
Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself.
Opening in single user mode - I run the recommended sbin/fsck -fy command to clean up the hard drive. It comes back after having checked 6-7 parts, saying that the MacHD is in good shape, with a message following saying that something had been "modified" (forgive me for not remembering the correct verbage at present). I then run the same command again, resulting in a message that the HD is clean and without error. I then "reboot" and remain hung on the white screen w/ grey apple.
Opening in verbose mode - I reach the following lines of text, and then there is no further progress:
enable
IONetworkController::enable
createMediumTables
enable end
MacAuthEvent en0   Auth result for: 00:23:cd:1e:f2:c4 No Ack
same line as above saying "Auth timed out" at the end
Command+option+r+p - shock two or three times, (three startup chimes) and computer continues to hang itself in the normal spot.
- So, at this point I took the advice of Apple Care and a few other friends, and tracked down a "retail copy" of Mac OSX (10.6.3) in order to try to do an Archive and Install or any sort of Disc Utility via the startup disc.
Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen.
Holding "option" during the startup gives me the option of loading from the HD, or the disc. Selecting the disc proceeds to whirr the cd drive, take me to the white loading screen with the grey apple, and... you guessed it... leaves the CPU hung.
My question is then, is my Macbook Pro unable to read this disc and execute Archive and Install/Disc Utility for hardware reasons as per the virus attack, or is the disc not compatible with my version of OSX (which I have since confirmed through my wife to be 10.6.6)?
Different sources have told me different things. The local AASP in Uruguay sold me what they professed to be the "latest" version of OSX - the 10.6.3, what's more for $55 dollars instead of the lower cost as available in the states (between $15-$30), so I am reluctant to go back to them for advice when they seem more inclined to cash in on my inexperience (Mac owner of less than a month) than actually fixing my issue. Apple Care told me that a standard "retail disc" should work, but I am assuming now that they believe I can snag the same version as initially came with my Macbook Pro. Should I be looking to have my wife mail my original OSX install DVDs down here to resolve this problem? Should 10.6.3-retail be working and is not for reasons I haven't identified? I have since done some online research and found mentions that doing any sort of HD partitioning or OSX reinstalls can only be accomplished by utilizing a disc of an equal or more recent version of the OSX (examples that 10.4 can't work on a notebook preinstalled with 10.5, etc). Does this translate to 10.6.3 not being able to function for my 10.6.6 MBP?
Any insight or thoughts would be much appreciated, as essentially all of my schoolwork and assignments are now trapped on an inaccessible HD. Thank you for your time.
- Joseph

I tried adding in a bunch of information about what your troubleshooting steps meant, but the server went into maintenance while I did. So, here it is again:
"Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself."
     This is FSCK running, and gives you an indication of it's progress.
"MacAuthEvent en0   Auth result for: 00:23:cd:1e:f2:c4 No Ack"
     This is either a failed DHCP request or ARP request.
"Command+option+r+p"
     Command+Option+P+R - Resets PRAM. That's why p+r.
"Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen."
     This problem indicates that the disc is too old to boot your system. The reason for why this disc cannot boot is because it doesn't contain the necessary drivers for your model MacBook Pro. My mom and brother have similar models, and my brother had similar issues while in Japan. He went and got an install disc as well, which failed, I ended up stepping him through so that it would boot in Safe Mode, and then got it working in Normal Mode remotely.
FYI: Sophos has a free Mac Antivirus program, that is very processing friendly, and will scan in the background. You may wish to consider it as an alternative to Avast! if it continues giving you problems. Though I suspect it may be coincidence that your computer had problems shortly after Avast! cleaned up files. Let me know how it goes. You may wish to open up Disk Utility and check your S.M.A.R.T. Status. You want to make sure it says "Verified" If it doesn't say "Verified" then you have a problem.
-Phill

Installing Express HD issues...

Similar Messages

Maybe you are looking for