Inter company GL posting with two diff company code currencys

Hi
For the Inter-company G/L Account posting (Company codes 1000 has EUR currency key & 2000 has GBP currency key), I am using the BAPI FM BAPI_ACC_INVOICE_RECEIPT_POST & BAPI_TRANSACTION_COMMIT.
For this, I am giving the 'DocumentHeader' structure with Company code 1000. 'Accountapayable' structure as Lineitem -0000000001 and credit Account No. & 'AccountGL' structure as Lineitem -0000000002 and Debit Account No. And in 'CurrencyAmount' strcure as with LineItem - 1, Currency - EUR, AMT-BASE as 100- & Lineitem - 2 as with Currenct key - GBP, Exchange rate as 68.36, AMT-BASE as 1.00. (Because as pee my understanding 100EUR = 68.36GBP).
Using the above test data, i am getting the output parameters result as with message as 'Document posted successfully: BKPFF 010000061210002009 T90CLNT090'.
After the call of BAPI FM even when i added 'commit work' also Accounting document number is not updating in the database.
But when I go to BKPF table or FB03 transaction I am not able to see this document.
Regards,
Basani

I have found it out myself. You can give the company code at item level and though the document number it gives back is the document for the header level code, where as this document contains the cross company code document inside it.

Similar Messages

  • P67S-C43: Won't POST with two sticks of RAM

    Hi, my new P67S-C43 has a peculiar problem: It won't POST with two sticks of RAM. I've tried both of my sticks (2 x 2GB G.Skill Ripjaws DDR3-1600 CL9 1.5V) individually in Slot 1 and the system POSTs fine. When I insert the second stick in any other slot, the system proceeds to restart unsuccessully a couple of times and then it will not POST. Only one blue LED is illuminated. When the system is in this state I have to reset the CMOS in order to POST successfully with a single stick of RAM again, which made the problem difficult to diagnose and very annoying to troubleshoot (lose BIOS settings after every attempt with the clear).
    Any idea of when we'll see a new BIOS? Are any betas available? I'd like to see if this is a BIOS problem before RMAing it.
    Thanks.

    Quote from: HU16E on 14-January-11, 16:52:36
    Which BIOS do you now have? Current official is V1.5. It would possibly help to have a full listing of all the systems components. Work with the one RAM stick initially in the primary dimm slot, blue closest to CPU. Get the OS loaded, drivers, etc., then add the second stick in the other blue dimm slot later. I have a feeling the RAM is setting itself up wrong. Might try the manual settings of 1333 9 9 9 24 @ 1.50V's.
    The BIOS was 1.5 out of the box but it's my understanding from another thread that there have been a slew of beta BIOSs released. I'm not going to load the OS until I get this straightened out. Also, both sticks would have the same settings with one stick or two installed. I fiddled with voltage, timings, etc but it still wouldn't work when I popped in the second stick. LIke I said, after every attempt with two sticks I have to clear CMOS or it won't work again with one stick. I'm hoping to try a newer BIOS before spending more hours on this, one setting at a time.
    Also, I have a 2600K but the rest of the components are irrelevant. At one point I had everything but the CPU/fan, video card, and RAM unplugged and the mobo entirely out of the case. Still didn't work until there was only one stick.

  • How to enter invoice with two different tax codes in one line?

    Dear friends,
    I have this PO for which I enter the invoice.
    I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
    I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
    How can I enter in one row in MIRO a debit with two different tax codes.
    Thank you.

    I want in the same line item to enter two tax codes.
    Do you Know if there is any way to do this?
    It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
    How can this be done?
    Thank you?

  • Invoice Posting with two accounting documents for Service PO

    Hi Gurus,
    We have created one service (GR based Invoice verification) PO for which we have assigned a costcenter which has been created for different company code(rather than what company code we have mentioned in PO).
    Now during Invoice creation out of 6 invoice entries only one Invoice has been created with two accounting documents for two different company codes, when we found this and canceled the same only basic entries has been reversed.
    I just wanted to know how this single invoice has been created with two different accounting documents for two different company codes.
    Please guide me in this regard.
    Thanks and Regards,
    Ravindra C.M

    Hi Aasif,
    Thanks for your reply, if that would have been case then each Invoice created for that PO should have two accounting documents but out of 6 invoice created only one invoice has been created with two accounting documents.
    I am completely agree with you that it has posted as inter-company transfer but why only one invoice has been created with two accounting documents.
    In addition to the above I just wanted to know if for GR-based invoice verified PO if we create a Invoice before creating service entry sheet whether two accounting documents will be created as we have mentioned different company code costcenter.
    Please guide me in this regard.
    Thanks and Regards,
    Ravindra C.M

  • Need title with two diff sizes fonts

    creating a title over dynamic background
    cant seem to create two diff sizes of fonts within the Text field of Motion version 3
    change one line and the other line above, which needs to be bigger, changes as well
    I could go to Adobe Illustrator for this, which I KNOW will work, but sad to have to leave the Apple app

    Chris. Mistaken is not the same as clueless or silly. I did not call you either, and meant only that you had it wrong about Motion 3's capabilities.
    Since there is a very specific way to do what you were asking about; one that could be confused because there is more than one way to edit a text object, I wanted to assure you that the only reason you weren't getting the right results was that you hadn't happened upon the correct procedure.
    You see, unlike FCP, some procedures in Motion can only be done ONE way. For example, resizing a layer automatically as it's moved back in Z space so as to maintain its relative proportion to the camera can only be accomplished with a modifier key in the HUD. Attempting the same trick in the inspector or canvas won't get you anywhere.
    When I say, "It's possible you're not going about it the right way," I mean exactly that. You are not taking the correct steps to achieve the effect you want. That doesn't mean that it can't be done. And it doesn't mean you're witless either.
    I'm sorry that you feel I'm "distasteful". You seemed convinced in your earlier post that independently adjusting single letters inside a text object wasn't possible in Motion 3. Aside from hoping to HELP you by correcting your mistaken assumption, my secondary goal was to make sure that another user searching for help with the same problem might read the thread and get an answer.
    Be that as it may, I will do my best to never to respond to one of your queries again. I don't give help where it's unwanted, and I certainly have no desire to take a badgering for trying.
    Good luck and goodbye.
    Andy

  • Post with clearing through transaction code f-04

    Hi
    While clearing the Gl account Manually with transaction code F-04 we
    are getting the Error Consolidated companies SASA and ' ' are different
    Diagnosis
    The number of the affiliated company must be clear for the selected
    document type for all line items. In this case at least two different
    companies or a company in connection with a business partner who does
    not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with
    a document type that allows cross-company posting. Otherwise, please
    correct the entered account.
    Please help in this matter. This is bit urgent
    Regards
    Vinay Bhaskar

    Hi Manasi,
    As the name suggest, F-04 allows you to POST to one account by CLEARING another account.
    For example you have a provision account which needs to be adjusted when the actual expense is paid -  this how it will be done -
    Give the document header details, select "Transfer posting with clearing", enter the posting key (40), give the GL account (expense account as per the example) and go to the next screen.
    Give the amount and other details for the line items and then select "choose open item" from the menu. The new screen will ask you to give an account where you will give the provision account (the account from which the open item needs to be cleared).
    Press enter and you will get the list of open items for the GL account from where you can proceed like any other clearing.
    Hope this clarifies. Do revert in case of any further queries.
    Thanks and Regards,
    anit

  • Advance payment and down payment with two diffierent tax code

    HI expert!!!
    i have one scenario that advance payment and down payment with different tax code.
    in this time, advance payement post to vendor with po number,  we do not know how to use tax code V1(deductable tax) or VF(Non-deductable tax),  so we post advance payement amount by tax code V1(deductable) even though the amount included both. but we must know how amount is defined deductable tax or non-deductable tax when invoice.
    when we want to post down payment with VF , we could not post it because advance payement posted with V1 tax code.
    this is main problem with my scenario.
    and  as i know,   can i post two advance payement to  same vendor and same po item?, i can't do it with my system.
    only one advacne payment  is possible with one vendor and one po item. or  amount of  advance payment is all cleared by down payment, then i can post another advance payment to same vendor.  is it standard process with po?
    thank you in advance!!

    hi,
    As per my knowledge their is no difference between  advance payment and downpayment.
    and tax code is used for taxes purpose not for the payment terms.
    taxcode is created in ftxp.and related percentages are maintained in fv11.
    ex:-
    if i want  excise duty  - 10% on basic value
    education cesse 2% on excise duty
    sec.education cesses 1% on excise duty
    then fitst i have to create 3 condition types and that 3 condition types are used in my taxprocedure  and that taxprocedure is assigned to country code..
    after that i am created one taxcode in ftxp like v1= exciseduty10%educatiocess2%sec.edu.cesses1% with this description.
    and given the values for that conditions in fv11.
    and used that v1 taxcode in your p.o in invoice tab.
    and payment terms are came from vendor not from taxcode.
    Thanking you.

  • Order with two configurable material codes

    Hi all,
    I have this necessity:
    create a sales order with one material code ( A ) to which are connected two configurable materials code, is it possible ?
    If yes,
    which should be the material type of the material code ( A ) and how to set the MRP views?
    is necessary create a BOM with BOM usage 5 ( sales distribution ) ?
    Thanks in advance for any kind of help.

    Thanks MxG,
    I dont know how to use this BAPI. .Can you suggest me a sample code.
    My reqmnt is, i have
    Sold to party, ship to party, bill to party , VC config material and all char values that should be populated while creating a sales order.
    please help me with what values should i populate in i/p paramters and and how to use this BAPI with some sample code if posible.
    Regards,
    Jessica.

  • Posting into two separate Company DB's

    Hello All,
    I have a peculiar situation where the customer is maintaining a separate CoA in his company. So we intend to maintain the second CoA as a separate company DB.
    Now, when an invoice is generate for say $1000 in DB-A , a similar invoice must be generate under DB-B also (under a different name although). My problem is (not the different customer name) , but how to have the posting under DB-B made automatically the moment posting of the invoice is completed in DB-A.
    Can we utilise a particular event after posting is completed, where a custom procedure can connect to DB-B and post the invoice ?
    Please advise suitable.
    Thank you
    Gautam

    It seems you set two separate databases and hope that they can be connect automatically. This is not an easy job even by SDK.  That is because you have to go through DI API to update the second DB.  Meanwhile you need to get any updates of the first DB auto trigger the second DB update. 
    Please check this forum to find out some useful info:
    SAP Business One Integration Technology
    Thanks,
    Gordon

  • MSI 890FXA-GD70 mobo won't post with two graphics cards (non-crossfire).

    As title of topic says, I have a Sapphire 4870x2 graphics card in the PCIE 1 slot and in the #3 slot I have an ASUS geforce 9600gt passively cooled inserted.  When powering on, no monitor signal.  With either card in ANY of the slots alone, the motherboard will post as intended.  I also cleared CMOS before using both and either together.  This is somewhat frustrating as I would absolutely love to use the geforce 9600gt as a physx card in many of the games I play.  Any advice on this one? 

    There are registry hacks available to make physx work with non-nvidia-primary graphics (ati) if you have an eligible graphics chip on-board.  I fixed the issue now.  Apparently, BIOS needed to know which graphics card was the primary - so by leaving the4870x2 connected first and connecting the 9600gt after (have a 120mm fan attached to the side of it with cable zip ties) things work as intended.  So yeah, i'll get those registry hacks working and physx going on this rig.  And please, if you're absolutely certain what you're saying say it.  Otherwise, please do some research before telling me what I can and can't do.

  • Inspection Type 10-Single Mat with two Diff Insp Typ with separate Char.

    Hi,
    I am using Inps with Mat Specs.
    I have single Finished Product having Insp type 4 & 10 attached.
    There are 8 char attached to Material out of first 4 should be visible for lot generated for insp type 4 and last 4 should be visible in Result recording screen for newly generated lot after doing Delivery i.e. 10 Insp type.
    Is there any setting for the same.
    Regards
    Nilesh

    There is no such provision available.You are using material specs then you have to consider 04 & 10 seperatly as there usage is different.
    or simply create task list with differnt usage like 1 & 6 with specific char.this will work fine.

  • Cross company Stock Transport with Intercompany billing

    hi,
    I'm trying to use the standard cross company stock transport order process, however, when i create the initail purchase order in the ordering company, the shipping tab does not appear, preventing me from creating a delivery. The customers and vendors have been assigned correctly. Can anybody help ???

    dear govender
    refer this
    STO PROCESS
    Stock Transfer Orders comes into picture when the stock is moving / Transferring between two different plants with two Different Company Codes or Stock Transfer between two plants with One Company Code the Difference are given below:
    P.O Order types and Delivery Types
    STO: - Stock Transfer Order – Intra Company
    Stock Transfer between Two Plants with One Company code.
    The Purchase Order Type is Used in this case is "UB".
    And the Delivery Type Used here is "NL".
    Goods Movement type: 641
    Item Category in delivery is NLN
    STPO: - Stock Transfer Purchase Order – Inter Company
    Stock Transfer Purchase Orders between Two Plants with Two Different Company Codes.
    The Purchase Order Type is Used in this case is "NB".
    And the Delivery Type Used here is "NLCC".
    Goods Movement type: 643
    Item Category in delivery is NLC
    A. Configure Intercompany Stock Transport Order
    Material should exist in both the plants (Delivering & Ordering),
    Internal customer should be assigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
    Assign its Sales area to the delivering plant
    Assign the document type and Delivery type NB and NLCC
    Assign the Supplying plant --> Receiving Plant --> NB
    Take the delivering plant and assign the sales area.
    Vendor master has to be created and assign the supply source (Delivering Plant).
    Create a purchase order ME21N ---> Save
    Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order number here and execute.
    Select the Delivery creation line and do the back ground process.
    Start the log display and see the delivery document number by the documents button
    Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
    Billing (Intercompany pricing conditions should be set).
    AND
    1. Customer No. for the Goods Receiving Plant - OMGN
    2. Availability Check- Checking Rule (if necessary) - OMGN
    3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders, NLCC)
    4. PO type (which i believe you have done) - OMGN
    5. Assign Vendor No. to the Supplying Plant (done) - VK02
    6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
    IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
    ***and by the way for the Invoice to work between Cross-Company Plants, you need also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure
    INTERCOMPANY PRICING:
    PI01 Intercompany: fixed amount per material unit
    PI02 Intercompany: percentage of the net invoice amount
    These condition types specify that the price charged by the delivering plant to the sales organization is shown as a statistical value in the sales order and an effective charge in the internal invoice.
    The condition records you create and maintain for intercompany billing are the same kind of records that you create for pricing in general.
    IV01 Inter-company Price ERLOS Revenue
    IV02 Inter-company % ERLOS Revenue
    STO CONFIG:
    The following steps have to be followed in order to configure stock transport order between two plants.
    1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
    2. In the purchasing data view assign the supplying plant and the schema group
    3. Create customer with the sales area of the vendor.
    4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
    5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
    6. Maintain condition records for pricing condition.
    7. Maintain carrier as a partner in the customer master.
    8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
    9. Assign the delivery type and checking rule to the document type.
    10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
    11. Create the STO using T-Code ME 21N and save.
    12. Check for release strategy if any and release using T-Code ME 28.
    13. Create delivery in background using VL10G.
    14. If delivery is created, it is an indication of correct configuration and master data creation.
    Stock transfer between two plants in different company codes is known as inter company stock transfer.
    Material should be maintained in both supplying and receiving plant MM01
    Stock should maintain only in supplying plant MB1C
    Create receiving plant as a customer in supplying plants company code and sales area XD01
    Assign this customer number in receiving plant details OMGN
    Assign supplying sales area in supplying plant details OMGN
    Assign delivery type NB for in combination of supplying/ receiving plants.
    Create STO ME21N
    As it is normal there in the item details we should get shipping date i.e. customer number
    Go for Delivery VL10B
    Shipping point *****
    Select PO go for execute
    then select the delivery then go for delvy ............create delvy,,,, delvy number generated.
    Goods Issue VL02
    Delvy doc **********
    Click on picking
    enter the picking qty
    Click on PGI
    in the mean time check in the PO history you will get the details
    Goods receipt MIGO
    Stock overview the stock will be updated....
    Check the below link
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2ba31643ad11d189410000e829fbbd/frameset.htm
    Stock transfers that include deliveries and billing documents/invoices are only possible between plants belonging to different company codes.
    If you want to carry out a cross-company-code stock transport order with delivery but without a billing document, you must set the Relevant for Billing (data element FKREL) indicator in Customizing of the item type to "blank" (Not relevant for billing).
    The following applications are involved in this type of stock transfer:
    • Purchasing (MM-PUR) in entering the order
    • Shipping (LE-SHP) in making the delivery from the issuing plant
    • Billing (SD-BIL) in creating the billing document for the delivery
    • Inventory Management (MM-IM) at goods receipt in the receiving plant
    Invoice Verification (MM-IV) at invoice receipt in the receiving
    Transfer of goods from one location to another location, it may be between plants within the same company code or in different company code's plants.
    within the company code, but plants,
    receiving plant will raise the STO in Supplying/issuing plant-ME21n,
    Supplying plant will deliver the goods to receiving plants ,
    then we need to pick n post the Goods Issue-VL02n,
    now when we can observe that the STO qty will be added into receiving plant and reduced in Delivering plant,
    To do this, we need do prior customization in SPRO-IMG,-
    material should be created in both plants( receiving & Supplying)
    -maintain the stock only in supplying plant
    -create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
    -assign this customer number to receiving plant's details along with the sales area,
    -Assign the STO doc type(UB) to Supplying plant, along with checking rule
    -Assign the Del type (NL/NLCC) to Supplying n receiving plant.
    *Del type=NL is not relevant for billing, where as NLCC is relevant for billing
    rewards if it helps
    siva

  • Balance the item 1 - Vendor invoice with two expense items for two co codes

    Hi
    In our case document splitting is active with profit centre balancing.
    When I am posting a FI vendor invoice with two expenditure items to two difference company codes & cost centres, the system is generating the clearing line items but it is not posting and giving an error message that "balance profit centre data is not there in line item".  Since this is a vendor item and no profit centre information cannot be given manually, system has to split the item with relevant profit centre information, right ?  But that is not happening, please help me out.

    Hi,
       Document splitting configuration is done at client level and assigned at company code level.
    Document split is done based on the item categories and base item categories configured.
    This can be done only for the entities inside a company code and not for the company code and it is done to have a Zero balance check in the entities.
    Document splitting is done mainly for reporting purposes.(eg: Segment reporting, Profit center reporting etc.,)
    you are posting for two different company codes in a single transaction means it will be cross company code transaction.
    System will generate two different document numbers for eac line item and a single cross company code transaction number for the entire transaction.

  • IPhone Developer Program with two brand

    Hi
    i need to subscribe to iPhone Developer Program with two different company but with only one Apple id for example:
    [email protected] is a developer that works and publich application for company A and company B.
    Is it possible to buy with the same Apple id two enrollment?
    thanks in advance.

    Yes. Your Apple ID can be linked to more than one iPhone Developer account. If it is, then the website will prompt you to choose which one you want to sign in to when you enter your Apple ID and password.

  • MS-6580 (845PE Max VER 2.0) not POSTING with 2GB of DRAM -- POST with only 1GB

    Ok I am currently fixing a client's PC, he wanted a RAM upgrade from 1GB to 2GB. I purchased a Komputerbay 2GB (2 X 1GB) DDR DIMM (184 PIN) 333Mhz DDR333 PC2700 kit, it was the cheapest I could find. The problem is, the system will not POST with the two 2GB modules installed, only with 1GB on either DIMM slot. I've tested them both RAM modules, and they work. Before, the PC had 2x 512MB DRAM installed, and it was working, so I don't think there is anything wrong with the DIMM slots.
    When I start the system, I get two paused beeps, and some weird noise, not sure what is.
    I've read the motherboard manual, and it says the maximum support is 2GB DDR 333mhz.
    Any help would be appreciated, thanks!
    PC Specs:
    [ALL SETTINGS ARE STOCK -- NOT OVERCLOCKED]
    CPU: Intel Pentium 4
    MOTHERBOARD: MS-6580 (845PE Max) ver.2
    PSU: Q-Max 350W ATX
    GPU: nVidia e-Geforce2 NV11-A1 MX400 64MB

    Quote from: Mike on 22-October-11, 03:36:53
    Does it post with only one 2GB dimm installed?
    I don't believe the board/chipset will support 4GB(2x2GB).
    http://eu.msi.com/product/mb/845PE-Max2.html#/?div=Detail
    I don't know where you're getting 4GB, I never said anything about 4GB - I must have made a type but what I mean was: The motherboard wouldn't post with two 1GB modules (2GB) as specified to be the maximum according to the manual. It would only post with 1GB(1x1GB or 2x512MB) or 1.5GB(1x1GB + 1x512MB) of RAM.
    No worries, the problem is resolved now.

Maybe you are looking for