Ipod SCREEN WENT WHITE ???    ANY ADVISE? PLEASE!!!

a friend of mine just give it to me...   i put it on charche with the usb port on pc... it was working perfeclty, i could see the apple, than the flashing ( do not unplug )     the screen was working, the menu too. all the funcions were ok... just happen that we lost power for few hours .. the pc turned off ( i wasn't home .. and when i came back i realized that my ipod screen was    FULL WHITE...WATH I CAN DO NOW? SOMEBODY TOLD ME TO FULLY DECHARGE IT  THAN PLUG IT AGAIN.. THE OLD OWNER SAID HAPPENED TO HIM BUT AFTER 2 DAYS IT CAME BACK NORMALLY,,, I TRY TO RESET LIKE PUSHING THE CENTER BUTTON AND MENU BUTTOn    AT THE SAME TIME    DIDN'T WORK    ANY OF YOU COULD HELP ME PLEASE? I NEED TO HAVE CONTROL  CAUSE IS INSTALLED ON MY MOTORCYCLE  AND WITH A WHITE SCREEN I CAN'T' DO NOTHING........ 

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • IPod screen went white

    My ipod screen went white and it says i should go into recovery mode but it wont let me do those steps after i hold the home and button at the top it wont go to the slide to power off can someone help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My IPod screen went white and I can't do anything on it. Is it like a virus?

    My IPod screen went white and I can't do anything on it. Is it like a virus? I need some help.

    See  Display Shows White Screen Here
    http://support.apple.com/kb/TS2771
    If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes...

  • I had greyed out wifi, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

    i had greyed out wifi on my iphone 4s, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

    No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

  • My ipod screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

    screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

    Let the battery fully drain. After charging for at least an hour try:
    iOS: Not responding or does not turn on
    If not successful time for an appointment at the Genius Bar of an Apple store.

  • IPod screen went white, then black. Buttons don't respond, can't do 5Rs.

    About 20 minutes ago, I plugged my iPod into my computer to charge, and sync some new music to it. It was fine when I plugged it in, the screen showed everything, etc. I removed some music from iTunes while the other music I wished to sync was downloading to my computer itself. After about 10 minutes the music finished, and I reopened iTunes to sync the music. I noticed my iPod wasn't on the sidebar, and checked the iPod itself. The screen was completely white, and I couldn't do anything with it. I unplugged it, plugged it back in, nothing. I pressed all the buttons, moved the wheel around, and heard some sounds, but then the screen turned black. Nothing is responding, and when I plug my iPod into my computer, it makes the sound to signal that I've plugged something in, but does not appear in My Computer or iTunes. I've tried the 5Rs, and some of them are even impossible since it doesn't show up in iTunes. Can anyone help?

    See  Display Shows White Screen Here
    http://support.apple.com/kb/TS2771
    If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes...

  • My ipod screen went white and idk what to do.! I've reset it over a million times! But Nothing happens. and when i called apple they said my serial number wasnt covered. but i got it from Ebay and idk what the owner has. i just want to replace it.

    I've reset it over a million times! But Nothing happens. and when i called apple they said my serial number wasnt covered. but i got it from Ebay and idk what the owner has. i just want to replace it. Can I Do That.?

    Have you tried connecting it to your computer and restoring the iPod via iTunes?
    If iTunes does not see the iPod try placing the iPod in recovery mode and then restoring the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I just got a new docking system so i plugged it in and put in my ipod, then straight away my screen went white and now its not doing anything! please help!!

    ! just got a new docking system so i plugged it in to my computer because it wasnt the wall charge type, so I put in my ipod, then straight away my screen went white and now its not doing anything! i press the home and lock button nothing happens... then i plug it in my computer it doesnt come up in itunes or even the copmuter. please help i can not live with out my ipod!

    Your post is abit confusing, especially on getting those weird messages and emails,( assumed in your Windows machine.)
    Most likely you have Restored the iPod using the new Macbook pro, using the same name as that in your Windows machine, hence the duplicate name warning, as it is trying to sync Automatically.
    If you are syncing your iPod to both the Mac and Windows, you must set it to Manually Manage Music, in the first machine that you setup iTunes with the iPod. Read thsi Apple Support Article
    In iTunes, Preference, tick on Prevent devices syncing automatically
    Hopefully your music are still in both your iTunes library,
    Connect the iPod to the Mac
    Restore it (just to fix any filesystem corruption by the Windows end)
    Set it to Manually Manage Music
    Sync your selected songs in your library.
    Whern sync complete, Eject it
    Connect it to your Windows PC.
    Select the song in the library
    Sync it.
    It should work if your ipod Hardisk is not giving any problem.
    Good luck!

  • Here, ipod touch screen went white,  tried to plug it in to itunes, computer did not detect it.  Tried pressing the menu and off/on button for 10 seconds and it still didn;t work?  Help please.

    Hi there, ipod touch went white.  I tried the menu and on/off button for 10 seconds.  I also tried connecting to the computer via i tunes.  My computer did not detect the ipod?  Any other options?

    See the white-screen topic of:
    iPod touch: Hardware troubleshooting

  • Screen gone white on ipod nano 5th gen any suggestions please ?

    screen gone white on ipod nano 5th gen any suggestions please ? been left outside but completely dry now

    Have you tried the 5 Rs?

  • My daughter tried to open a game on her Ipod touch and the screen went white and I can't get it to do ANYTHING...I've tried holding the sleep/wake button and it does NOTHING, still only a white screen.

    My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If that doesn't work, try a Restore:
    From iTunes, select the iPad and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
    There's more that you can do.  Post back if none of the above solves the problem.
    By the way, I always allow "push."  That allows the app developer to "push" information to your device rather than waiting for you to ask for it.  However, "don't allow" shouldn't cause the problem that you're experiencing.

  • My ipod touch 4 's screen went white after i dropped it.

    my ipod touch 4's screen went white after i dropped it.i can still see some icons but with difficulty.there is no external damage and i think the touch works.what happened and how much does it cost to repair it?

    iPod touch 8 GB
    $149
    iPod touch 8 GB (2nd gen.)
    $99
    iPod touch 8 GB (4th gen.)
    $99
    iPod touch 16 GB
    $199
    iPod touch 16 GB (2nd gen.)
    $149
    iPod touch 32 GB
    $249
    iPod touch 32 GB (2nd gen.)
    $199
    iPod touch 32 GB (3rd gen.)
    $149
    iPod touch 32 GB (4th gen.)
    $149
    iPod touch 64 GB (3rd gen.)
    $199
    iPod touch 64 GB (4th gen.)
    $199
    Clearly, it's not inexpensive.  You might wish to try a few things yourself.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • While updating my ipod i noticed that my ipod had froze at the end of it, i then decided to restart it. It began to restart and then the screen went white then restarted itself again and has been on this loop everytime i go to use it. How can i stop this?

    Hi, when i was updating my ipod last night i had noticed it had been doing it for a while. I then realised that it had froze so i just thought to restart it. When I did this it restarted normally by having the apple icon appearing, then the screen went white for a few seconds and the ipod then turned off. Before i even touched another button the ipod restarted again and the white screen appeared again and this has been on a continuse loop everytime I touch a button on my ipod since last night. Please tell me that someone knows what to do!!

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My screen on my ipod touch went white...help

    My screen on my ipod touch went white...Help Please.

    See  Display Shows White Screen Here  >  http://support.apple.com/kb/TS2771
    If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes...

  • My ipod touch screen went white and when i plug it into my computer....nothing happens.  help!

    I went to turn on my iPod Touch one day and the screen went white.  Tried resetting and got nothing.  Tried plugging in to usb port and got nothing.  Neither the computer nor iTunes recognizes my device.  What do I do now?

    By resetting did you see the apple logo? Try pressing and holding the on/off and home buttons simultaneously until the screen goes blank (black) and you see the apple logo. It should take about 10-15 seconds to reset.

Maybe you are looking for

  • Cannot choose printer when printing HTML report

    Hello, I have lost many many hours trying to print correctly a report that is composed only of a JPEG image. After a conversation in the forum, I concluded that the LabVIEW has a bug printing Standard Reports, as it cannot manipulate correctly the ma

  • Home sharing between Apple TV 2 & Windows 8

    I have my Apple ID on both devices but can't see my computer on Apple TV. Tried everything available on the support websites. Is there something else I can do other than smash it over the wall? Thats the only thing I haven't tried so far! I also trie

  • Problem in Oracle CDC Create Subscription option

    Hi All, I am facing a problem setting up CDC in test environment after cloning from DEV. We are using Oracle 11g and OWB 11g2 versions. For setting up CDC through OWB client, when we started start CDC, job throws runtime error saying error mapping fu

  • RAID - wrong drive size displayed...

    Hi I am setting up RAID for the first time on a MacPro, and am confused about the way the available space on the drives is displayed. It seems to display too much available space. I have two 500Gb drives in bays 2+3 of my MacPro, and in DiskUTILITY I

  • How do I get a url to open on a widget?

    Im making a widget that will have an image(And other stuff). When the image is clicked i want safari to open the url. How do i do this? *Im new to dashcode and programming. *Im using Dashcode.