Issue with Sender Side JDBC processing

Hello,
I am facing some problem with Sender Side JDBC Processing.
I am polling the DB MY SQL Server 2000 and using some SELECT statement i picked up some data and updated the DB with an UPDATE statement. At the receiver side i am using RFC adapter which takes the data from the DB and process further to SAP system.
At sender side , i can see that the DB has been updated but in Integration Engine / Adapter Engine i could see any message related to that. So now my question is where did the message go.
Can you please provide the inputs.
THanks,
Soorya

Hi Surya,
as u mentioned that u r unable to see ur message in IE & Adapter enigne
pls do chk with the DB connections with XI and make sure that u choose every thing under same name space
pls try to refersh cache
thanx
Sampath

Similar Messages

Issue with Sender File FCC

Hi Experts,
I have an issue with Sender File FCC Adapter. The file being picked is of type TXT and it is tab seperated. The first line contains the field names and from next line onwards we have values for those fields.
The field names and field values are tab seperated. Even inserting a single letter in some field value manually disrupts the whole setup & alignment of the TXT file and the Sender File CC is unable to pick up the file from the shared folder. If the first file is errorenous and after that a correct TXT file is posted, it fails to pick up the correct file as it is trying to pick the errorenous file first.
The Error thrown is :
"Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'ABCD':java.lang.Exception: ERROR in configuration / structure 'ABCD.': More elements in file csv structure than field names specified!"
I have two questions:
1. Is there a way to handle such a scenario? For e.g., the errornous TXT file gets picked but throws error in PI.
2. Is there an alternative that the sender FCC channel picks up the correct files and filter out the errorneous ones ? ?
Thanks,
Arkesh

Hi Arkesh,
I think you are passing more number of fields than expected. Please check paramters defined and send the data accordingly.
In the processing parameters tab of sender file adapter, you have an option called Archive faulty source files, below to that you would have option to enter the " Directory for Archiving files with Errors".
I hope this helps you....
Thanks,

Having issues with sending attachments via iMail to PC users

Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?

You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
You can use my referral link http://db.tt/MXNpy62 to create an account.

Is anyone else having issues with sending / receiving messages since ios7 upgrade

Is anyone else having issues with sending / receiving messages since ios7 upgrade

I found this link, and am trying it right now to see if it helps.
http://forums.macrumors.com/showthread.php?t=1647944&highlight=ios7+imessage+tro uble

Issue with Sender File Adapter file content convertion

Hi Everybody,
I am facing an issue in FCC at the sender side.
Below is sender text message which contains 9 rows.Each row represents one node in the source structure.
ROUASIS.MLASIS.A02001COMASN1.1.2
HDR7072396166N^MAEU/SZH3PA288200707248IF07082007090311CAFXSYATFXS^20070903
PPL5705150010506YAT254915402713586045162543971730000002723.000C2750000000024.1602007081120070903^^
SIM3020070711^20070730Y^^^00
CONTTNU946652840CN0579566   7335
CTN100069350800012609166209.850.08068.5830.4838.10
DTL520^01
CTN200069350800012609173209.850.08068.5830.4838.10
DTL520^01
In the above message CTN row is repeating after each DTL because of which i am getting the error.
<b>Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation</b>
Can somebody help me out in resolving this issue.
Thanks in Advance,
Arvind

Hi Arvind
plas use the following parametes in the sender communication channel.
i have tried one scenario
my source structure is like that:
data (0..unbounded)
record (0..unbounded)
     key (1..1)
     fname (1..1)
     lname (1..1)
     age (1..1)
detail (0..unbounded)
    key (1..1)
    salary (1..1)
    empid (1..1)
so use the following parameters at the sender side
document name:                messge type name
document namespace:       ur message type namespace
Recordset name:               data(as per according to my source structure)
RecordsetStructure:           record,,detail,
recordsetsequence:           variable
recordsetpermessage:       *
keyfieldname:                   key
and different parameters:
RECORD.fieldSeparator     ,
RECORD.fieldNames         KEY,FNAME,LNAME,AGE
RECORD.keyFieldValue     1
DETAIL.fieldSeparator         ,
DETAIL.fieldNames             KEY,SALARY,EMPID
DETAIL.fieldNames             2
if you still have the problem pleas reply back.
Thanks
Rinku

Issue with RFBIBL00 batch input processing

Hello ABAP Experts,
I am having issue with a speed of batch input session processing. If you can please help me resolve the issue.
I have a requirement to post liquidation document to clear open vendor down payment items and then to clear vendor invoice with liquidation. I have created a custom program to address this requirement where it uses the SAP program and Call Transaction.
For liquidation document posting, I am using the program RFBIBL00. The custom program has steps:
1. Submit RFBIBL00 via job to create batch input session
2. Close job
3. Submit RSBDCSUB via job to process batch input session
4. Close job
5. Wait for 15 seconds
6. Read job log to get liquidation document number
7. If no document posted then display error
The issue is when the job log is read it says u2018Session 10zrsbdcsubxxxxxxx is being processed by user in mode on serveru2019 and there is no error message or no document number with message number 312. So the program displays error message, stops and cannot perform the second step. If I check in the system after a couple of minutes I find the document posted. I also increased the wait time. But the first record processing always takes longer and the program finds as a failure. The program can process next several records with success.
I am looking for expert help if you please suggest how to resolve this.
Thanks & Regards.
Yashasvi

Hi,
Have you tried calling FM DEQUEUE_ALL before/after schedulling job?
Gouri.

Issue with sending message delay

Hi; Got an issue that has cropped up with Mail lately. Been on the phone all day with Apple Care. Every test on the planet hasn't found what's wrong. I would greatly appreciate knowing if anyone else has come across this issue.
Mail version 4.3 (1081) on a clean IMac OSX 10.6.4. All updates current as of today. ISP is RCN; all settings correct and no known issues with the RCN SMTP server according to them.
Issue is repeatable through all troubleshooting tests performed today. You name it; we did it :-))
Issue seems isolated to sending messages in Mail. Message can be composed normally, then when the send button is hit, I get a revolving wheel for between 30 and 45 seconds on the send folder, then the message clears normally and in the case of a test back to me, can be received normally.
What's strange is that I installed Thunderbird for the sole purpose of testing the send function there to isolate MAIL as the culprit and all messages instantly cleared in Thunderbird and received normally. This takes the RCN SMTP server out of the error equation as far as I can determine.
Anyone have any ideas on this issue. Apple has given up trying to find the problem.
Many thanks
Dudley Henriques

It is "Mail and Address Book" but it's a subset of 10.5
here...http://discussions.apple.com/forum.jspa?forumID=1338
edit: SL stands for snow leopard i.e. 10.6.x
Message was edited by: taylor.henderson

Sateillite A200-1A9: Issue with sending/receiving E-mail using Windows Mail

Using Windows mail I have to close/open the programme to be able to send mails, they get stuck in the Outbox. By closing and reopening the programme the mail gets sent. Also the Blue figure 1 in brackets showning 1 unread mail in the Outbox is there all the time although there is no mails read or unread in the Outbox
Not a server problem as all mails are going/receiving fine on my desktop.
Pressing send and receive button does not help. although some of the time it will receive mails when pressing send/receive but will not send them
I do have Norton Internet security 2007 and am getting fed up with the continuing problems that this seems to cause over the period 2004-7.
Is there an issue with the Windows mail programme running with Vista that is known

I think I have found a solution
Please check this:
Windows Mail will not Send or Receive mails
http://support.toshiba-tro.de/kb0/TSB7701X30005R01.htm
It seems that the update of Software Desktop SMS to the newest version will help to sort out this problem.

Issues with sending mail when using 2 email accounts - possible bug?

Hi all,
Having issues with trying to send email from the 3g iPhone. I have 2 IMAP acounts set up on the phone, one
which works fine but when I try to create mail from the primary account as soon as I hit send it exits the mail program and goes back to the home screen.
Both IMAP accounts have identical settings apart from the username and email address. On the primary account there is no sent messages folder on the iPhone whilst there is on the account that works. I've had a look in the advanced settings and it is programmed to store sent messages in the local sent folder which doesn't exist. I've tried selecting it to store in a IMAP folder as I thought maybe it was crashing as the local folder wasn't there but it has the same result.
Have deleted the account and entered the settings back in again to try to coax it to create the local sent folder but cake up with the same problem.
Suggestions are welcome.

You have their SMTP servers mixed up, go to Mail>Preferences>Accounts>Outgoing Mail Server (SMTP), click on the server then choose Edit SMTP Servers and select the correct one for each account. Then check the Use Only This Server box

Issue with heat maps refresh process in EID 3.1?

Issue with Heat Maps in EID 3.1? Heats maps don't refresh unless you go back to home page and then again go back to the Endeca app.
In Oracle Sample app if we open the Map tab we will see that Milwaukee is really hot in the heat map. now if we filter the data to just show data from 100 miles within Orlando, FL then the map will get refreshed to show that area but the colors on heat maps do not change.
Now if we keep the refinements same and go back to home page and again go back to sample app and maps tabs then it will still show area of 100 miles within Orlando, FL which is good but now heat map would have updated and it would show us correct color.
Now if we remove the refinement then it would show complete US map as hot which is again wrong.
I have observed this issue in chrome browser as well as firefox.
Is there anyway to overcome this issue?

This issue was resolved after applying latest patch from Oracle.

Issue with sending an image in the body of email using SAP ABAP

Hello All,
We have a requirement to send an email to our external clients that contains an image in the body of the email. We are using cl_bcs class in ABAP to send the email and the mail is sending in html format.
We have uploaded the image in the SAP system using the transaction u2018SMW0u2019 and we are using the Function Module 'WWW_GET_MIME_OBJECT' to retrieve the image while sending the mail. But image is not displayed in the mail by using this approach.
When we tried to use the image URL from the company website with <img> tag of the html code in the ABAP Program, the image is displayed in the mail. But, to display the image we need to use the download option and also it is taking time to download.
Our aim is to download the image automatically in the mail. I have searched sdn but couldn't find complete info.
If anyone worked on the similar functionality, kindly reply.
Thanks in advance for your help.
Best Regards,
Ravi.

Are you trying to send the e-mail with the image embedded? I did it with PHP and Phython... Never done it in ABAP, sadly to say... but I guess it should be possible. You'll need to play with the way the HTML code of the e-mail is being created, using MIME and the right headers. I'm guessing the result of WWW_GET_MIME_OBJECT will be your 'Content-ID'.
Do some google with "Send an HTML email with embedded image". Even if it's related to another programming language it might give you some clues about how to compose the e-mail and you'll be able to replicate the logic by using CL_BCS.
An alternative would be to just attach the image to the e-mail.
Cheers,
Andres.

Issue with color profile image processing

Their seems to an issue with the iPhone displaying an image which has a Color profile of: Generic HDR Profile. The image appears very dark and nearly unviewable. This has been frustrating to trouble shoot becasue the image will display correctly on the computer, but when it is viewed on the iPhone it looks completely different. When images have other color profiles such as sRGB the images will look the same on both platforms. When an image has a Generic HDR color profile it will not display correctly on the iPhone.
Anyone else come across this problem?

When PSE gets weird, the first thing to do is to reset the preferences. Go to the editor preferences>general, click this button and restart the editor:

Issue with two SID installation in a Single Windows 2003 Server.

Hi,
When I install second installation in a same single machine where already One SID installed, first one is goes down.
But Database is working fine.....
Disp+Work.exe status first it goes to Yellow then goes down..
Kernal of First installation is already updated.
Disp+Work.exe ---> Develeoper_Trc detail is following..
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        TRN
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        6360
Thu Oct 30 16:22:26 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6360) [dpxxdisp.c   1254]
     shared lib "dw_xml.dll" version 159 successfully loaded
     shared lib "dw_xtc.dll" version 159 successfully loaded
     shared lib "dw_stl.dll" version 159 successfully loaded
     shared lib "dw_gui.dll" version 159 successfully loaded
     shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Oct 30 16:22:31 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ides_TRN_01                             <
DpShMCreate: sizeof(wp_adm)          21008     (1616)
DpShMCreate: sizeof(tm_adm)          5912624     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EF60050, size: 6604928)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF67360
DpShMCreate: allocated tm_adm at 000000000EF673C0
DpShMCreate: allocated wp_ca_adm at 000000000F50ABF0
DpShMCreate: allocated appc_ca_adm at 000000000F5109B0
DpShMCreate: allocated comm_adm at 000000000F5128F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F599580
DpShMCreate: allocated gw_adm at 000000000F599600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F599630
DpShMCreate: allocated wall_adm at 000000000F599640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 6764
argv[0] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=TRN
argv[7] = -DSAPMYNAME=ides_TRN_01
argv[8] = -DSAPPROFILE=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( ides) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >ides_TRN_01                             <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 30 16:22:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 292
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4516) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6764)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 30 16:23:11 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Thu Oct 30 10:53:21 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6800 Ended         no      1   0        0
1 DIA     6796 Ended         no      1   0        0
2 DIA     6760 Ended         no      1   0        0
3 DIA     6772 Ended         no      1   0        0
4 DIA     6896 Ended         no      1   0        0
5 DIA     6848 Ended         no      1   0        0
6 UPD     6860 Ended         no      1   0        0
7 ENQ     6784 Ended         no      1   0        0
8 BTC     6864 Ended         no      1   0        0
9 BTC     6892 Ended         no      1   0        0
10 BTC     6924 Ended         no      1   0        0
11 SPO     6928 Ended         no      1   0        0
12 UP2     6908 Ended         no      1   0        0
Dispatcher Queue Statistics               Thu Oct 30 10:53:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update     total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure:               Thu Oct 30 10:53:21 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
RM-T13, U14,                 , gokul_ggn, 16:22:40, M0, W-1,     , 1/0
Workprocess Comm. Area Blocks               Thu Oct 30 10:53:21 2008
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ides_TRN_01                             < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6752) (SOFT_KILL)
Stop icman
killing process (6700) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 292 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 292 (pos=2)
SiSelNRemove: removed sock 292
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 292
NiBufIClose: clear extension for hdl 5
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1225364011/669000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:6752 HANDLE:404)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:27 2008
NiISelect: TIMEOUT occured (1000ms)
Thu Oct 30 16:23:28 2008
[DpProcDied] Process died (PID:6752 HANDLE:404)
wait for end of icman
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6700 HANDLE:412)
[DpProcDied] Process died (PID:6764 HANDLE:388)
DpStartStopMsg: send stop message (myname is >ides_TRN_01                             <)
NiIMyHostName: hostname = 'ides'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 30 16:23:39 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 332 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 332 (pos=3)
SiSelNRemove: removed sock 332
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 332
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 6360) [dpxxdisp.c   10484]
Good Bye .....
Please help out.
Thanks in Advance.
Regards,
Gokul Cahndola

Yes Finally I Got the solution.
please check
>r3trans -d   To Check Conectivity between Apps and DB Server.
If 000 then its OK- mean connectivity is OK, in this case all work.
when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed. DUE to that reasion First one goes down.
Solution:- Both system entry should be Listner and tnsname file. Then Both server will work.
**********THANKS TO "AC"**************
Regards,
Gokul Chandola

Issue with sending a lot of messages together to XI

Hello Experts,
I see a strange problem when I try to post a lot of messages together to the XI Server about half of them error out.
I see these errors for eg. when I put about 50 files for a sender File Adapter, Send a lot of IDocs from R/3, Send a lot of messages in a loop from the Client Proxy etc...
The error is :
<?xml version="1.0"; encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I try to reprocess the Error Messages again I see the same behavior about half of them go through and half of them error out with same error. I keep resending the messages and once the total error messages are less than 10 they are processed successfully.
This is happening in our QXI box but there is no such problem in the DXI box.
Not sure what is causing this problem.
Any pointers will be greatly appreciated.

Hi Kanwaljit,
I think this problem is because of limitation on the maxmum number of connetion to the javastack. When you boombard XI with large number of messages at same time its not , bcoz of limitation on number of connection its just processing few where connection is available and remaining are failing with some error messages.
Even we had same problem few dats bacl....and everytime it used to give us different error messages eventhough all required parameters where maintained in Exchange profile.
Nilesh

Issue with Bulk Load Post Process

Hi,
I ran bulk load command line utility to create users in OIM. I had 5 records in my csv file. Out of which 2 users were successfully created in OIM and for rest i got exception because users already existed. After that if i run bulk load post process for LDAP sync and generate the password and send notification. It is not working even for successfully created users. Ideally it should sync successfully created users. However if there is no exception i during bulk load command line utility then LDAP sync work fine through bulk load post process.Any idea how to resolve this issue and sync the user in OID which were successfully created. Urgent help would be appreciated.

The scheduled task carries out post-processing activities on the users imported through the bulk load utility.

Issue with Sender Side JDBC processing

Similar Messages

Maybe you are looking for