ISync will not use the current .mac password settings

After accidently deleting the main keychain I am trying to use iSync to bring my keychains back in - I have set up iSync before heading out on the road and had it working properly - I have a .mac account and can access it on the web.
When trying to sync - and after making sure the proper password is loaded into the .mac system pref's pane I get this error message
Invalid .Mac Username or Password. Please verify your .Mac Member Name and Password in .Mac System Preferences.
I searched and found one members solution ( reseting keychain) but it did not work for me - anything else I can do?
If I wanted to reload Keychain from my desktop where would the file be located so I could get someone to load it up onto my iDisk and replace what is on my Macbookpro
Thanks!

https://support.mozilla.org/en-US/kb/ask-tb#w_how-to-ask-your-question

Similar Messages

  • Before using the current Mac version Yosemite, I did not have an Administrator password.  It seems now that one is required to unlock and make changes in settings.  I have tried all my usual passwords but to no avail.  any ideas???

    Before using the current Mac version Yosemite, I did not have an Administrator password.  It seems now that one is required to unlock and make changes in settings.  I have tried all my usual passwords but to no avail.  any ideas???

    Boot into Recovery. OS X: About OS X Recovery - Apple Support
    Select Terminal from the Utilities menu.
    At the prompt type,
    resetpassword
    Hit return.
    Follow the prompts in the utility to select hard drive, then user.
    Reset the password.
    Exit the utility and restart.
    You will need to log in with your new password, but your keychain will not be reset.
    I’m not sure what access you’ll have to the old keychain since it didn’t have a password. You may be able to get into the keychain and reset the password to match your login password.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT3986 I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy amac and install the OS  forom the pc to the apple product i will not use the pc after can i use the OS off

    I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS  from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?

    I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
    Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
    By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
    So you may not need to install Windows at all.

  • HT201209 iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening

    iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening???

    Any time you've changed anything in your billing, it does this once to very things.

  • My ipod will extract the files but will not reload the current software on to the ipod

    My ipod will extract the files, it will not reload the current software so I can download my itunes back on it.

    Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues

  • My iPhone will not use the 3G network.

    My iPhone will not use the 3G network. I have to turn it off in the settings. Then my phone will connect to the E network. This is the only way I can make calls. Does anyone know why?

    I am in Utah and with AT&amp;T. I was able use 3G for about 6 months and then it just stopped. I took it to the apple store and they said it was an AT&amp;T issue. I went to AT&amp;T and they said it was an Apple issue. I had the SIM card replaced ands that still didn't work. It wasn't until I turn off the 3G that I was able to make calls again. Now I'm just on the E permanently.

  • Could not see the Current User POV settings page in web preview

    Hi All, When i try to view a report in the web preview with Preview user POV checkbox selected and HTML view selected, i am getting the error 'An Error Occurred 1001'. I cannot see the current user POV settings page.But when i click the PDF view selected with preview user POV checkbox selected, i can see the output of the report in the pdf format but i still get the same error as above on the top of the page.I feel this is related to User POV settings. I tried deleting the user POV in the Administration-->Maintain Repository section but it's still not working.Can anyone help me please.Thank You very much in advance.

    Hi,
    Run the configuration wizard and verify that the 'EM Console' product is checked.
    If not, extend it to include EM console (Shut down SOA server before you extend)
    - Vivek

  • Cannot get MacPro to allow me to boot to an alternative boot disk. Can choose in control panel but will not use the disk to boot. Also won't boot using disk selected using option key

    My primary boot disk is encrypted as is a secondary boot disk (backup) but I cannot boot using any other disk. System 10.8.5, MacPro 4.1.
    All disks mount using primary boot disk. All disks check out as OK and I have repaired permissions.
    When I choose in the control panel the Mac boots but will always use my original boot disk.
    When I select the disk using the option key at startup, the boot process stalls with a grey screen and a spinning cursor.
    Thanks,
    Dave

    Still trying to figure this out. I erased the drive, did a format using disk util and then re-installed the system but I still cannot get the disk used as a startup drive. I also tried an external firewire drive and it won't allow me to boot from it either.
    I can choose it starting up with the option key but it just gives me a blue screen and the spinning cursor.
    If I select it in the startup pref pane it boots into my other startup drive only.
    DaveLon

  • I have forgotten my passcode and it says I have to connect to iTunes to reset but when I connect it to iTunes it will not reset the phone to factory settings please help

    I Have forgotten my passcode and I have connected it to iTunes to factory reset but will not reset it please help

    Hi ..
    Follow the instructions here >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • Ipad Air will not use the hotspot from my Samsung Galaxy S4

    I just got my Ipad air WiFi ( 16GB).  I have a samsung galaxy S4 phone.  When I turn on my hotspot on the samsung  and connect to it from the Ipad, it says there is a connection, the WiFi symbol is on the Ipad, and then try to go to the internet and nothing happens. I then turned off my hotspot and turned on my boyfriends Iphone 4s hotspot and it worked instantly.  I have tried rebooting both devices as awell as try using an open network on my hotspot on the samsung. Still nothing! Both devices are up to date on everything. Has anyone else had a problem connecting thier samsung to Ipad?

    if it see the signal, and lets you join your galaxy hot spot - it should work.  But your carrier needs to know, and you need to have an accout that supports the use of a hotspot.  Att for example, charges $20 mermonth to allow tethering.  Is your account set up for that?

  • MY COMPUTER WILL NOT USE THE PRINTER I DESIGNATE, BUT ON ITS OWN GOES TO ANOTHER ONE I USE WHEN ON VACATION

    I have designated one of my printers as the default but the computer looks for one I use for vacations.

    Try resetting the printing system.
    Reset Printing System

  • Adobe 9 will not use the default voice, only Microsoft Sam?

    hi have adobe reader 9 installed AT&T Crystal voice. set as default. BUT adobe 9 only recognizes, Microsoft Sam. how to change? thanks

    hi have adobe reader 9 installed AT&T Crystal voice. set as default. BUT adobe 9 only recognizes, Microsoft Sam. how to change? thanks

  • Backup schedule will not use faster backup method

    Hello,
    I am currently using Windows Server Backup in Windows Server 2008 R2 to make a copy of our Exchange server. When I initially set the schedule it was configured to use the normal backup method, but after noticing that it was taking an exceedingly long time
    I went into the Performance settings and selected the Faster backup option.
    The faster method works great if I use the Backup Once option, but for some reason the scheduled backups still try to run the normal, non-incremental backup. I can't find where to change this in the schedule. 
    **I know that the first time you run the faster backup it needs to make the full backup. It has done this(it takes about 3 days) and every time I have run it since using the Backup Once option it has worked fine(takes about 1 hour). Once again, the issue
    is that the schedule will not use the faster option and tries to use the normal backup every time.
    Thank you

    I am backing up to a network location. When I use the Backup Once option and assign it to use a network location it is able to do the Faster backup. It doesn't make sense that the faster backup works when I do it manually but doesn't work when if it is
    initiated by the schedule. They are both going over the network.

  • Photosmart D7560 will not use Photo Black Ink

    My D7560 will not use the Photo Black Ink. I am going through a lot of regular black ink. I have changed the print quality but it still did not use it. What am I doing wrong?

    Try this solution. I hope this helps. Inform me for concerns.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01510629&cc=us&lc=en&dlc=en&product=3396085
    Please click on KUDOS if you find my solution helpful.

Maybe you are looking for

  • Renew subscription EVERY time I launch an app??

    Hey guys, I was asked by the AdobeCare Twitter Account to post my issue in this forum, so here I am: I recently subscribed to a Adobe CC membership and everything worked fine when I had the CS6. Now since the CC Versions were released, I wanted to up

  • Edit in Dreamweaver

    Apologies if this appeared twice -- it never showed up in my NG reader... I have forgotten the backward contortion that needs to be made in order to place an Edit in Dreamweaver button on the IE7 interface. Can someone point me to the double-secret p

  • Reading e-pub with ADE on Windows 7

    I download books through iTunes for my e-reader, but also like to read on my desktop (Windows 7). I find that some titles open in ADE but others do not (although are recognising the book, and identifying title and number of pages. Why is this? Am I d

  • Request must still be Approved - ChaRM

    Hi all, I am unit testing ChaRM and I am getting an error when I try to bring the changes into production. <b>Error</b> Transport control program tp ended with error code 0250 Message no. XT200 Diagnosis An error occurred when executing a tp command.

  • Creative Cloud won't run when I click it's icon

    I downloaded the Creative Cloud app, went through the installer and created an icon. When I click the icon nothing happens. Opened the file location and ran the app from there, nothing. What did I do wrong? What can I do to fix it? Windows 8.1