ITunes logo appears with a picture of USB cord when I turn on the power. Can't get past that point.

Help

That's because you have to connect the iPad to your computer and launch iTunes. You need to activate the iPad within iTunes on a computer - if the iPad does not have iOS 5 on it. iTunes will tell you what to do once you connect the iPad and start iTunes.

Similar Messages

  • When I upgrad my iphon 4s, iTunes logo appears with a picture of USB cord when I turn on the power.please please help

    after I upgrad my iphon 4s, iTunes logo appears with a picture of USB cord when I turn on the power.please please help

    I had this same problem when I tried to update.  It locked up during the update.  Your phone is in recovery mode.  The only way I could restore my phone was to connect to a different computer and ask it to restore my phone.  It worked and thanks to the fact that I had backed everything up to the iCloud before updating, everything is back to normal.  I won't be updating to IOS 6.2.1 again.  I had also updated iTunes and now whenever it starts it gives me an error message -42110 and doesn't recognize my Iphone when it's connected.  Hopefully,  Apple will fix this soon.  Good luck.

  • I pod touch is frozen . itunes logo and cable icon come up. can't get past that. already tried to restore

    ipod touch is frozen. i tunes logo and cable logo appear. can't get past that. already reset ipod

    This happened to me when the logo and cable comes on it either means that you have clicked to restoreit already try connecting it to itunes and click on the small little icon on the left of an ipod scroll down and click restore as nothing will happen if you don't restore it and syncing will not help it will stay the same.

  • My Mac Pro starts up when I turn on the power, BEFORE I switch it on with the button, why? Plus, my computer keeps freezing and blacking out.

    My Mac Pro starts up when I turn on the power supply (when I plug it to the outlet), BEFORE I switch on the button on the computer, why is this happening? Plus, my computer keeps freezing and blacking out and I'm forced to restart it, that's when the compter starts on its own when I turn on the power.

    Hello Engender,
    I should have followed up with a progress report because I eventually eliminated all the problems I was having with my Mac Pro, now it's behaving like a new computer… beautifully.   I did originally take Grant's advice above, changing the setting that I had in the System Preferences > Energy Saver but that only stopped from rebooting on its own when I shut down my Mac properly.  Otherwise it continued to restart on its own after freezing or crushing when I switched on the power.  I took my machine to the Apple Store and after many tests they couldn't find anything wrong with it.  I was very depressed about the whole business.
    It was after going onto many of the other Apple related websites that I discovered that it wasn't a faulty power switch or fan, as as I originally thought, but found out that my problem was related to the Graphic Card and possibly I did not have enough ram (I had the original amount of 2 GB).  The original card that came with the computer: 512 MB ATI Radeon X1900 XT was over heating and forcing my machine to shut down, I think it was because I had upgraded to OSX Lion which on its own requires at least 2 GB of ram to operate well.  I added 4 GB of Ram to the 2GB I had (4GB kit (2GBx2), Apple 240-pin FBDIMM, DDR2 PC2-5300 upgrades for Apple Mac Pro (4-core) 1st Gen. - 2006-2007 Desktop/PC, CT579443 from Crucial.com about $160 for the set) and replaced the Graphic Card with ATI Radeon HD 5770 1024 MB from Apple (around $260), (ATI Radeon HD 5770 Graphics Upgrade Kit for Mac Pro (Mid 2010) - Apple Store (U.S.))  This card works very well with my original Mac Pro 2008.  I installed it about two weeks ago and no problem with it starting on its own, over heating or freezing.  OSX Lion works well and I'm thinking of upgrading to Mountain Lion once I learn that my Mac Pro 1.1  will work with the new hardware I installed.
    Your problem could just be the power cord but I agree with you that doesn't sound right, when I mentioned faulty switch I meant the part where the power cord meets the power button, the unit which houses the power distribution, I thought at first that it could be faulty but changed my mind because of the computer overheating. 
    I don't know if this is of any help to you but I hope your trouble will be solved with the new cord.

  • Downloading lastest upgrade on my ipad2 went black then iTunes logo appeared with picture of charger cable

    I was downloading the lastest ipad upgrade when the screen went black then appeared an itunes logo with a connecter cable leading to it. I have fully charged and have switched on and off but same still appears.
    Thanks
    Mick

    See my answer here: https://discussions.apple.com/message/25194435#25194435

  • HT1766 My iPhone 5 "froze" and the only item that is displayed is an iTunes logo (musical notes) and a white USB cord with arrow pointing towards the logo.  I cannot access the iPhone through my computer or get it to do anything else.  Dave

    While attempting to set up my new iPhone for iTunes the first time, an error message displayed on my computer saying that I needed to restore it to my factory settings and the only function that the iPhone displays is the message listed above.

    that's the exact same thing that happened to my iPhone 5. (see my thread) Well that occured after I downloaded the iOS 6.2. The very same image appeared to my phone. What I did was (well the situation left me no option) restored it to factory settings. However, your iTunes must dowload (i think) new version of software for your phone. It took me 3 hrs!. But I also have to warn you. It may still ask you to restore again, and again, and again, after each restoration.
    What I did was, disconnect the cable from your phone and computer, then press the power and home button together, hold it down lke that till the apple logo appears. The phone successfully worked but Siri & the voice command keep messing with my calls, playing music by itself, returning to home by itself.

  • HT1430 My iPhone is completely frozen. I did a hard reset about 10 times and finally the iTunes logo appeared with a plug-in showing. I can't get it to anything else. Help?

    MY iPhone is completely frozen. I did a hardest and finally after 10 times it came up with the iTunes logo with a plug-in sign.  It is still frozen.
    WHat should I do.
    MErmaid

    You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
    When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
    So far I have tried the following to no avail:
    Checked my pc's device manager - it recognises the device and says it is functioning properly.
    Checked the drivers to make sure they are upt to date.
    Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
    Reinstalled the latest itunes.
    Reset the ipod.
    Put the ipod into disk mode and reconnected to itunes.
    Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
    Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
    At this point I dont really want to part with another $300 odd dollars for a new one.

  • My phone is frozen on the logo screen when you turn it on how can i get it on without losing everything?

    I have so much on my phone I can't lose between me and my Military person that I cannot lose. I tried contacting support but the only way to get ahold of them is if they call my iphone or i put in my serial number which is conviently not accessable seeing as it's all in a phone that is frozen. I keep holding the home and the turn on button but it hasn't gotten me farther. How the **** am I suppose to get it to turn on so I don't lose all his pictures and messages? and none of this is backed up either.

    Try plugging it into a computer with iTunes opened. If you see anything that says restore, say no.
    Sometimes these issues resolve themselves when you connect the device to iTunes.
    What happens when you hold the home and sleep/wake button? I know it doesn't work, but does it shut off at all?

  • What did I do wrong? I used to have iTunes installed on this computer and lost it when it crashed. No I can't get past a certain point in the installation point. I keep getting an error message stating that I need to verify that I have access to this file

    Help!! What's going wrong here. I used to have iTunes installed on this computer but lost it when it crashed. I've tried re-installing it numerous times but I keep getting the same error message. "Error writing to file: C:\ProgramFiles\iTunes.Resources\es.lproj\iPadLicense.rtf. Verify that you have access to that directory." I know I have access to that directory because on a different computer I can sync my iPad and iPhone. What am I doing wrong? What do I need to go in and authorize or turn on? Any help greatly appreciated. Thank you.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • My macbook air does not start up successfully. when i turn on the power, it just turn blue after the apple logo, how to reboot or repair,.. pls help me what is the buttons command... thanks in advance.

    pls help me how to reboot my macbook air,.. because starting it up was not successful. the screen just turns blue after the apple logo appeared.

    i know loads of people who have had this problem including me.  The Java script update apparently had some virus that has overloaded the start up disk.   I took to apple who said i have to have the machine rebuilt but first i have to go to a data recovery company to get back everything that was on it.  Data recovery company have quoted me nearly £1000. 

  • All i get is apple pic or a pic of a usb cord when i turn it on

    turns on but no display.  apple display olny. picture of a usb cord only

    Connect it to computer and go to itunes

  • What does the little circle with a line in it mean when in edit mode? how can I get rid of it?

    What does a little circle with a line in it mean when I am trying to edit? how do I get rid of it?

    robynlwitheridge
    What version of Premiere Elements are you using and on what computer operating system is it running?
    From your description "little circle with a line in it", that sound like a symbol when you are trying to do a cannot do operation.
    What exactly are you doing in your edit activities when you see this circle with a line in it? Is it at the end of the mouse cursor?
    Can you post a screenshot of it?
    If my first impression of what this is happens to be correct, then "How do I get rid of it?" answer comes from
    a. defining what you want to do
    and
    b. correcting any mis-steps you are taking in doing that
    We will be watching for your follow up.
    Thanks.
    ATR

  • HT1414 Can't get past set up page with new iPhone

    Just got a new iPhone from Apple store. Tried to restore from backup, but can't get past the "connect to iTunes" screen on my phone. I can see my phone in iTunes, have synched it to my computer, installed phone updates from my computer, but still can't get past the "connect to ITunes" screen. I am connected...I can't figure out what's wrong that I can't get past this screen to my home screen.

    I went into the Apple store and the guy fixed it somehow using icloud (strange since I backed up to itunes not icloud) but I'm not complaining!

  • I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS, iOS 3.1.2. Thanks

    I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help

    please help me!!!

  • I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

    I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

    you may have to do these stepps a few times http://support.apple.com/kb/HT1808

Maybe you are looking for

  • How to get instance of all components in a frame  dynamically

    Hai , I want to know how to get the instance names and values of components on a frame . if any body knows anything on this Please help me Advance Thanks

  • IDoc to JDBC  and JDBC to IDoc Scenario

    Dear All, I am working on IDoc to JDBC and JDBC to IDoc Scenario. I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to

  • How do I change frame sizes to user-defined frame sizes

    Hi, I hope someone can help me. I dont know how to change my project frame size to a user-defined frame size. ( like from 1920x1080p to 575x900p ) Ive found nowhere a answer to this question.

  • Class jsp_servlet. mybean not found

    Using WLS5.1, SP2 on Win2K Pro and when Weblogic tries to compile my JSP, I           get the error:           class jsp_servlet.<nameofmybean> not found...           Where is my bean class supposed to be? If I place it in the jsp_servlet           f

  • P43 not starting

    M/B: P43 Neo-F, 7519? CPU: Freq:2.83GHz, FSB 1333MHz, S-spec: SLAWQ, Core 2 Quad (Q9550) Ram: Corsair 2x1GB DDR2, 1066MHz PC2-8500 C5 Starts for 2 seconds then switch off for 1 second and then again and again. if i reset bios is starting for once unt