[JS CS3] Display number of changes made

My script does a simple GREP find/change:
app.findGrepPreferences.findWhat = "grepstringtofind";
app.changeGrepPreferences.changeTo = "";
myDoc.changeGrep();
Is there any way to have the script display the "Search is completed. 121 replacement(s) made." dialog box that appears when "Change All" is clicked in the GREP find/change UI? Or alternatively, to somehow programmatically count how many changes were made?

app.findGrepPreferences.findWhat = "grepstringtofind";
app.changeGrepPreferences.changeTo = "";
f = myDoc.changeGrep();
alert ("Search is completed. " + f.length + " replacement(s) made.")
Peter

Similar Messages

  • Really urgent: Collective display of material changes made f

    hi,
    i had been assigned a work in which  i have to display that from this time period 1.12.2007 to 31.12.2007, these are the materials in which these are the changes made by these persons.
    can anybody provide me tcode for this ,as help will be definately rewarded.
    plzzz its really urgent.

    HI,
    BUT IWANT TO HAVE COLLECTIVE DISPLY FOR IT.
    PLZZ DAT TCODE . I KNOW DAT DIS TCODE MM04 BU TIT SHOWS FOR SINGLE MATERIAL BUT I WANT IT FOR COLLECTIVE MATERIAL.

  • Tcode for displaying the changes made to sales order

    hi,
    i want to know is dere any tcode which displays how many times and by whom and what are the changes made to sales order.

    hiii
    use VA03 for display..
    also refer to following link
    Regarding 'display of changes in the sales order'.
    regards
    twinkal

  • Website not updating changes made in DW CS3 (though they show up in browser preview) what's wrong?

    this is the website:
    http://www.bsarchitects.co.uk/epic.html
    and the only changes made have been to the text, so it shouldn't be that hard?
    i am taking this website over from someone else and am fairly new to dreamweaver. as far as i can tell, the website uses frames and this might be the problem?
    Thanks!

    There are a few possibilities. First of all, you may be seeing a cached version. Clear your browser cache a try again. Another common problem is that the site definition is setup wrong, so you are uploading to the wrong folder on the server. Please show us your local and remote site definition. Finally, this is a frame site so make sure you are uploading the correct page.
    What is the text you are trying to change?

  • "An autonomous transaction does not see any changes made by main transact"

    Hi,
    I'm trying to reproduce the "An autonomous transaction does not see any changes made by main transaction" reffered on :
    Oracle® Database Application Developer's Guide - Fundamentals
    10g Release 2 (10.2)
    Part Number B14251-01
    chapter 2 SQL Processing for Application Developers
    Paragraph : Autonomous TransactionsI set up a simple case...
    create table emp_ as select * from emp
    begin
      update emp_ set hiredate=hiredate+100 where empno=7934;
    end;
    create or replace trigger trg_emp_
    after insert or update on emp_
    for each row
    declare
        pragma autonomous_transaction;
        emp_var emp.hiredate%type;
      begin
        select hiredate
          into emp_var
          from emp_
        where empno=:new.empno;
        dbms_output.put_line('empno: '||:new.empno);
        dbms_output.put_line('old hiredate: '||:old.hiredate);
        dbms_output.put_line('new hiredate: '||:new.hiredate);
      end;Prior to any change...
    SQL> select empno,hiredate from emp_;
    EMPNO HIREDATE
    5498 21/4/1982
    5499 11/10/1981
    5411 10/10/1981
    5410 10/10/1982
    7369 17/12/1980
    7499 20/2/1981
    7521 22/2/1981
    7566 2/4/1981
    7654 28/9/1981
    7698 1/5/1981
    7782 9/6/1981
    7788 19/4/1987
    7839 17/11/1981
    7844 8/9/1981
    7876 23/5/1987
    7900 3/12/1981
    7902 3/12/1981
    7934 23/1/1982After the change...
    SQL> begin
      2    update emp_ set hiredate=hiredate+100 where empno=7934;
      3  end;
      4  /
    empno: 7934
    old hiredate: 23/01/82
    new hiredate: 03/05/82
    PL/SQL procedure successfully completedAccording to the Oracle doc the select of the autonomous transaction should not see the change made to the hiredate column of the table in the main transaction(in the anonymous block)....
    What may i do wrong..????
    Thank you,
    Sim

    Simon:
    As Tubby pointed out, your dbms_output commands do not display the value you selected in the trigger. Your trigger based demonstration needs to be more like:
    SQL> SELECT * FROM t;
            ID DT
             1 05-SEP-2009
             2 17-JUL-2009
    SQL> CREATE TRIGGER t_ai
      2     AFTER INSERT OR UPDATE ON t
      3     FOR EACH ROW
      4  DECLARE
      5     PRAGMA AUTONOMOUS_TRANSACTION;
      6     l_dt t.dt%TYPE;
      7  BEGIN
      8     SELECT dt INTO l_dt
      9     FROM t
    10     WHERE id = :new.id;
    11     DBMS_OUTPUT.Put_Line ('ID: '||:new.id);
    12     DBMS_OUTPUT.Put_Line ('Old dt: '||:old.dt);
    13     DBMS_OUTPUT.Put_Line ('New dt: '||:new.dt);
    14     DBMS_OUTPUT.Put_Line ('Aut dt: '||l_dt);
    15  END;
    16  /
    Trigger created.
    SQL> UPDATE t SET dt = sysdate WHERE id = 2;
    ID: 2
    Old dt: 17-JUL-2009
    New dt: 25-OCT-2009
    Aut dt: 17-JUL-2009
    1 row updated.So, the automomous transaction select did not see the changed value of dt.
    I know you are just trying to understand automomous transactions here and would never do sometihg like this in production right? :-)
    Your trigger, as written, has some interesting side effects because of the automomous transaction. For example:
    SQL> INSERT INTO t VALUES(3, sysdate - 25);
    INSERT INTO t VALUES(3, sysdate - 25)
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at "OPS$ORACLE.T_AI", line 5
    ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'
    SQL> UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy');
    UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy')
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at "OPS$ORACLE.T_AI", line 5
    ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'John

  • Regarding MSC2N and MSC3N: Batch Display and Batch Change

    Hello Guys,
    I have faced a problem regarding batch display and batch change.
    Scenario:
    I have created a Process Order in COR1.
    Using MIGO i made the goods receipt of that Process Order.
    Now when i want to display for that particular material document number Details data..
    In Batch --> Classification (you can check it also from MSC3N using the batch number of the particular material) there is a field named Availability Date its coming 0000/00/00.
    But when i checked it from MSC2N in cange mode its coming with desired data.
    Any valuable idea..
    Regards,
    Sayak

    Hi,
    This looks like a SAP Functional Query. Please post this in MM forum for quicker replies.
    Forums->SAP Solutions->ERP - Logistics Materials Management (MM)

  • How to find out the changes made to the customized table entries

    Hi Team
    i want to know the changes made to the customized table. i have a 'Z' table in my production system, in that table i would like to know whether any table entry is deleted or not. if at all there is any deletion happened, i want to know who had done it.
    So i request you to please let me know the procedure for the same.
    Thanks
    Raj

    Hi Nagaraju,
                       Go to Table Maintenance (SM30)- Display mode-- Utilities-- change Logs. Give the Date range. before giving the date range click on display status , this will show you If the display is active or not. Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • DNG changes made in LR4 not visible in LR3

    I am working on a MacBook Pro with both Lightroom 3 and Lightroom 4 installed. I wanted to test my assumption DNG is a DNG and that changes made to a DNG in LR4 would be visible in LR3, so I made changes to a DNG in Lightroom 4, clicked Update DNG Preview and Metadata and then exported that file as a DNG. I imported that DNG into a different Lightroom 3 catalog and the changes were not visible, even after choosing Read Metadata from File. Those same DNG changes were not visible in Bridge either. The changes are visible in the Finder, but not in Preview. Anyone know why and how I can make Lightroom 3 recognize the DNG changes made in LR4?

    Your DNG is original-image-data + an adjustment recipe stored as metadata that tells LR how to display and export the image.  Your DNG does not contain adjusted image data like a TIF or JPG would. 
    Your adjustments are probably in Process Version 2012, new to LR4, and only understood by LR4 and ACR 6.7/ACR 7.x and newer.  The embedded JPG preview in the DNG is what LR4 put there.
    There is a difference between a DNG being understood as a valid raw file by older Adobe products which it can, and those older products knowing how to interpret the adjustment recipe, which they can’t. 
    Specifically, LR3 doesn’t know how to interpret PV2012 adjustments, since it was last updated in 2011 and only knows about PV2010 and earlier.
    Other non-Adobe programs, like Finder, can only see the embedded JPG preview which is the LR4 rendering, but LR3 re-renders the image using its own interpretation of the settings it can understand.

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

  • Xcelsius 2008 - Unable to preview changes made in design mode

    Xcelsius 2008 - Unable to preview changes made in design mode
    I have installed Xcelsius 2008 (RTM) and also Service Pack 1 / Fix Pack 1.1.  Unfortunately, I can now not preview changes I made in design mode (but can see the change in design mode).  In addition, if I save the changes made to the Excel spreadsheet (using this as the datasource) and then exit out of the application, then go back in, the changes have not been saved?!
    I have also installed Fix Pack 1.3, but the same issues occurs.
    This is causing us issues as we have developed a number of dashboards that can no longer be updated.
    Please could someone advise?
    Many thanks,
    Neil.

    I would recommend decomposing large sets into more manageable sets.  For instance, if you have data for a very large regional district, decompose the data into smaller sets for sub-districts.
    As for a paper, I'm not sure, but the main determinant of performance is how many cells you bind to the component.  For a typical component on a typical computer, I'd recommend no more than 9000 cells.  On a weaker computer less, on a stronger computer more.

  • CHANGES MADE IN ECC NOT GETTING REPLICATED TO CRM - CUSTOMER

    Hi All
    We are currently working on CRM 4.0 connected to ECC 4.6C. 
    All the middleware connectivity have been configured and we have a process of creating customers (BP) in CRM which inturn flows to R/3.  We dont create customers in R/3 system.  Now when i make any changes to the customer in R/3 system i dont find a queue getting generated in SMQ1 in R/3 system and also the changes not getting reflected in CRM system.  But any changes made to CRM is flowing to backend R/3 system.
    Settings like groupings, number ranges, PIDE etc are configured.
    Please let me know how to sove this issue.
    Cheers
    Ramesh

    The issue lies in the following customizing in your R/3 system:
    1) Go to tx SM30 in the R/3 system.
    2) Open the view CRMRFCPAR.
    3) For CUSTOMER_MAIN and CUSTOMER_REL objects you need to uncheck the 'Discard' checkbox  Save.
    This will make sure that the delta changes for your Customer Master flow
    to the CRM system.
    Check out these notes as they maybe of assistance
    914437
    504169
    504265

  • How do I get iTunes match to accept changes made to my library?

    After making changes in my iTunes library (Genre, Album Information, etc.) iTunes Match reverses all the hours of organizing I have done and returns it to the original state. How do I make sure my library is the master source and allow me to force upload changes to the cloud and not vice versa?

    Hi,
    THis is an issue that is reported regularly on this forum.
    Changes made to data when match is turned on should automatically filter through to the cloud. No need to select update iTunes match. This is the way it should work and I have not had any major issues. The only exception seems to be iTunes store purchases but only on a small number. The changes eventually stick after a few attempts.
    I Keep all my music in my library on my main computer. Changes filter through to my other computer which is set up to stream. I sometimes do the change on that computer. Such changes appear on my main computer.
    Jim

  • Report of changes made by user to a material on a purticular date

    hi,
    i am working on report in which i have to display the changes made by user to a material on a purticular date.
    i am able to display he all fields but i want to 1 more field which is in tcode MM04 i.e. text field(which means discription of te action taken).
    i want to display this field plzz help me out as help will be deinftely rewarded.
    Edited by: Alvaro Tejada Galindo on Feb 21, 2008 1:45 PM

    it's possible that there will be no change document for it and in this case you will have an issue because you will have to directly check in the database or enhance this transaction with adding a change document in some customer exit or BADI.
    I wish you good luck
    /wg

  • How to block displaying message "Save changes to file 'Test1' " in BEx?

    Hello, dear colleagues!
    Do You know how to block displaying message "Save changes to file 'Test1' " in BEx?
    I need some BEx setting which can block it and make it the same way as You close common Excel workbook without any changes made to it after opening e.g. without any messages, just clicking the cross. 
    Thank You all very much in advance!
    Val
    Edited by: vtb777 on Nov 21, 2011 1:46 PM
    Edited by: vtb777 on Nov 21, 2011 1:50 PM
    Edited by: vtb777 on Nov 21, 2011 1:52 PM

    from time to time i am working with macroses, but they are not good for the report's reliability.
    maybe You have some example of such macros?
    UPDATE:
    I have tried to edit event, called WorkbookBeforeClose in module BExEventHandler, adding there such a line:
    Application.DisplayAlerts = False
    but no result. maybe there are some other ways of solving this problem?
    Edited by: vtb777 on Nov 22, 2011 6:26 AM
    UPDATE-2:
    I got such a code, but it doesn't work:
    Private Sub Workbook_BeforeClose(Cancel As Boolean)
    If MsgBox("Save changes to file? " & Name, vbYesNo, "") = vbNo Then
       Cancel = True
    End If
    End Sub
    Edited by: vtb777 on Nov 22, 2011 11:07 AM
    Edited by: vtb777 on Nov 22, 2011 11:16 AM
    Edited by: vtb777 on Nov 22, 2011 11:20 AM

  • How does the delta works for changes made to Sales Document

    Hi Experts,
    How does delta for 2LIS_11_VAITM for the changes made to Sales Order Header.....
    Example:
    If a sales order had 10 line items any changes at the item level are captured by 2LIS_11_VAITM
    Could you please update me on how the changes made at Sale Order Header level like Change of contract Date...etc
    Does those changes are captured by 2LIS_11_VAITM.......
    Please update

    Hi,
    SAP written lots of programs inside the Extractor, so it is not possible to tell how it will work, so you goto RSA2 in ecc and give the datasource and click on display and see the Function module and debug it you will know.
    Thanks
    Reddy

Maybe you are looking for