Kernel panics with both sticks of RAM but with either

Hey everyone. Thanks for taking a look at my panic logs. A couple notes are below, followed by the text from four panics. Any suggestions or tips would be helpful! I've already gone through and followed Dr. Smoke's instructions on trying to isolate kernel panics (no haxies, safe mode startup, no login items, &c.) I'm running 10.4.7 on a 1.5GHz PBook with two 1GB sticks of RAM.
1) don't know what the first one (Thursday's noon panic) is.
2) looks to me like the next three (Thursday's 7pm, Friday 5:30, and Friday 5:50) are all RAM problems?
3) I downloaded Rember to check out the RAM, even though my PBook's hardware test was clean, as was techtool's tests. Running Rember is what "caused" both of the Friday crashes.
4) I took one 1GB stick out of the computer and running Rember resulted in a clean run - I also switched which slot it was in, to see if there could be a problem there. BUT, I also ran the test with the OTHER stick of 1GB RAM and that one came out clean too!
5) I put both sticks in again and got a "failure" when Rember was "comparing the MUL."
6) I suppose what might be going on is that the system is using up a certain set of blocks on the RAM that Rember then doesn't have access to when there's only one stick in. If I could be sure that was the problem, I'd buy another stick of RAM and run Rember with one or the other to see if I could isolate which stick might be bad.
7) Until then, I suppose I'll run my computer with "just" one stick of RAM to see if it crashes at some point.
8) Do you think it could be a different hardware problem that doesn't allow ANY two sticks of RAM to be used at the same time?
Thu Aug 24 12:04:31 2006
panic(cpu 0 caller 0x000A853C): Unexpected user state trap(cpu 0): 0x00000000 DSISR=0x42000000 DAR=0x00000000000D6000 PC=0x00000000FFFF8A60, MSR=0x000000000200F030
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A853C 0x000ABD80 0x000AC0AC 0x67674151
backtrace terminated - frame not mapped or invalid: 0xBFFEE9D0
Proceeding back via exception chain:
Exception state (sv=0x521E5000)
PC=0xFFFF8A60; MSR=0x0200F030; DAR=0x000D6000; DSISR=0x42000000; LR=0x904017E4; R1=0xBFFEEAC0; XCP=0x0000000C (0x300 - Data access)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
Thu Aug 24 19:08:25 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000030 PC=0x0000000000223A3C
Latest crash info for cpu 0:
Exception state (sv=0x42814C80)
PC=0x00223A3C; MSR=0x00009030; DAR=0x00000030; DSISR=0x40000000; LR=0x00223A3C; R1=0x2C7DB1B0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0038FAAC 0x0021BB90 0x0023F6D0
backtrace terminated - unaligned frame address: 0x43B1187C
Proceeding back via exception chain:
Exception state (sv=0x42814C80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x52CA9280)
PC=0x900061CC; MSR=0x0200F030; DAR=0x43B11FA4; DSISR=0x40000000; LR=0x00015AE0; R1=0xBFFFEE30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8404 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42814C80)
PC=0x00223A3C; MSR=0x00009030; DAR=0x00000030; DSISR=0x40000000; LR=0x00223A3C; R1=0x2C7DB1B0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0038FAAC 0x0021BB90 0x0023F6D0
backtrace terminated - unaligned frame address: 0x43B1187C
Exception state (sv=0x52CA9280)
PC=0x900061CC; MSR=0x0200F030; DAR=0x43B11FA4; DSISR=0x40000000; LR=0x00015AE0; R1=0xBFFFEE30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
Fri Aug 25 17:32:07 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000E022FE35 PC=0x000000000005FB00
Latest crash info for cpu 0:
Exception state (sv=0x42648000)
PC=0x0005FB00; MSR=0x00009030; DAR=0xE022FE35; DSISR=0x40000000; LR=0x0005DBDC; R1=0x2C66BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000E83FC 0x00062260 0x00062920 0x000A885C 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42648000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42A66C80)
PC=0x907DEA04; MSR=0x0000D030; DAR=0x000E0000; DSISR=0x42000000; LR=0x907DE7B4; R1=0xF0100FD0; XCP=0x0000000C (0x300 - Data access)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8404 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42648000)
PC=0x0005FB00; MSR=0x00009030; DAR=0xE022FE35; DSISR=0x40000000; LR=0x0005DBDC; R1=0x2C66BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000E83FC 0x00062260 0x00062920 0x000A885C 0x000ABD80
Exception state (sv=0x42A66C80)
PC=0x907DEA04; MSR=0x0000D030; DAR=0x000E0000; DSISR=0x42000000; LR=0x907DE7B4; R1=0xF0100FD0; XCP=0x0000000C (0x300 - Data access)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
Fri Aug 25 17:49:03 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B01C0060 PC=0x0000000000220C9C
Latest crash info for cpu 0:
Exception state (sv=0x42945780)
PC=0x00220C9C; MSR=0x00009030; DAR=0xB01C0060; DSISR=0x40000000; LR=0x00220C78; R1=0x2C7AB610; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00220D48 0x00231C6C 0x000F9604 0x0010DE00 0x0010E03C 0x000FB760
0x000E2524 0x000E20B8 0x000F5118 0x000ED468 0x000ED828 0x002AAF98 0x000ABF30 0x6B657926
Proceeding back via exception chain:
Exception state (sv=0x42945780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x51DA7780)
PC=0x90001E4C; MSR=0x0200F030; DAR=0x000F9014; DSISR=0x42000000; LR=0x00005488; R1=0xF007EB30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8404 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42945780)
PC=0x00220C9C; MSR=0x00009030; DAR=0xB01C0060; DSISR=0x40000000; LR=0x00220C78; R1=0x2C7AB610; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00220D48 0x00231C6C 0x000F9604 0x0010DE00 0x0010E03C 0x000FB760
0x000E2524 0x000E20B8 0x000F5118 0x000ED468 0x000ED828 0x002AAF98 0x000ABF30 0x6B657926
Exception state (sv=0x51DA7780)
PC=0x90001E4C; MSR=0x0200F030; DAR=0x000F9014; DSISR=0x42000000; LR=0x00005488; R1=0xF007EB30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
1.5 GHz 15 PowerBook Mac OS X (10.4.7)

Memtest, which is what Rember is just putting a GUI around, doesn't cause panics. Also, the best test is Memtest done from the command line in Single User Mode. Consensus seems to be that AHT and TechTool Pro 4.1.x (don't know if they managed to improve 4.5.1, but if they did, it would be to just include Memtest in their own routines probably) are both weak on memory testing.
According to users and MacIntouch reader feedback, iTunes is actually one of the best applications and where problems may show up.
memory can differ enough in timing, voltage, construction so that even memory from same vendor/maker will "not get along" which is why it is always best to buy together sometimes. Even Crucial had trouble summer '04 when Apple made small changes in the G5 and DDR400.
If AHT doesn't find any problem with the logicboard, cpu, or RAM slots then I would just try to replace the RAM for say 2 x 1GB? from a known brand.

Similar Messages

K9NGM not working with two sticks of RAM

Hi
I've not posted on here before.
I have recently built my own system - for details see below.
It has been working fine with dual boot into XP and Vista (Vista only installed after updating the BIOS to BOSSKILLER's version 3.23)
I have bought an extra stick of RAM and made sure it is exactly the same as my current stick.
I cannot get my system to work with both RAM sticks installed.
When booting into XP with the 2nd stick installed, the PC randomly freezes. Sometimes with a beep coming from the internal speaker.
The mouse and screen and keyboard just stop. This can happen at any time - but always within a few minutes of starting up.
If I try with Vista then it won't even boot. I can go into safe mode, but the last thing it does is load crcdisk.sys. Nothing at all happens after that.
I can use both OS's fine with just one stick of RAM installed. I have tried with both sticks independantly and both seem to be OK. I have also used memtest.org and all the tests complete with no errors.
I have checked the motherboard manual and can confirm that the two sticks are correctly installed in dual channel mode.
I have read elsewhere that adjusting the voltage settings of the memory in the BIOS could help, but there is no option for doing this in this BIOS version.
Any help or advice would be greatly appreciated
Thanks
JP
SPECS:
MSI K9NGM-L nForce 410 Socket AM2 SATA onboard VGA 8 channel audio mATX
AMD Athlon 64 X2 4200+ Socket AM2 (2.2GHz) L2 1MB (2x512KB) Retail Boxed Processor
2 x OCZ (OCZ26671024V) 1GB DDR2-667 PC2-5400 CL 5-5-5-15 VALUE SERIES MODULE (LIFETIME WARRANTY)

Quote from: jpmilne on 27-February-07, 21:07:54
Just an update to say that I have it all working now.
I did loads of memory tests etc.
Both memory sticks showed up no problems with the tests.
I eventually managed to find an update to the BIOS to version 3.3 and it's all working wonderfully now.
Boots into Vista and XP with both sticks installed - running Dual Channel no probs.
Cheers
JP
nice, thanks for feeback

P67S-C43: Won't POST with two sticks of RAM

Hi, my new P67S-C43 has a peculiar problem: It won't POST with two sticks of RAM. I've tried both of my sticks (2 x 2GB G.Skill Ripjaws DDR3-1600 CL9 1.5V) individually in Slot 1 and the system POSTs fine. When I insert the second stick in any other slot, the system proceeds to restart unsuccessully a couple of times and then it will not POST. Only one blue LED is illuminated. When the system is in this state I have to reset the CMOS in order to POST successfully with a single stick of RAM again, which made the problem difficult to diagnose and very annoying to troubleshoot (lose BIOS settings after every attempt with the clear).
Any idea of when we'll see a new BIOS? Are any betas available? I'd like to see if this is a BIOS problem before RMAing it.
Thanks.

Quote from: HU16E on 14-January-11, 16:52:36
Which BIOS do you now have? Current official is V1.5. It would possibly help to have a full listing of all the systems components. Work with the one RAM stick initially in the primary dimm slot, blue closest to CPU. Get the OS loaded, drivers, etc., then add the second stick in the other blue dimm slot later. I have a feeling the RAM is setting itself up wrong. Might try the manual settings of 1333 9 9 9 24 @ 1.50V's.
The BIOS was 1.5 out of the box but it's my understanding from another thread that there have been a slew of beta BIOSs released. I'm not going to load the OS until I get this straightened out. Also, both sticks would have the same settings with one stick or two installed. I fiddled with voltage, timings, etc but it still wouldn't work when I popped in the second stick. LIke I said, after every attempt with two sticks I have to clear CMOS or it won't work again with one stick. I'm hoping to try a newer BIOS before spending more hours on this, one setting at a time.
Also, I have a 2600K but the rest of the components are irrelevant. At one point I had everything but the CPU/fan, video card, and RAM unplugged and the mobo entirely out of the case. Still didn't work until there was only one stick.

Z97m 4790k infinite loop at bios code 03 with 2 sticks of RAM

Hello,
Just built a computer with
i7-4790k, Silverstone te01 cooler
MSI Z97m Gaming MOBO Bios 1.3 (current)
780 gtx
Silverstone Strider ST75F-P v1.1 on the haswell list..
Now the issue. The computer will not boot with two stick of RAM.
First ones were Crucial Ballistix Tactical 2x8gb that are not on the list. Works perfectly with one stick. as soon as you stick another one in the computer it won't boot past post Code 03. Then it reboots and goes on forever like that.
Second one are corsair CML16GX3M2A1600C11, 2x8gb which are on the list. Same issue as above. one stick works great. can oc to 4.7 and rock solid. as soon as you stick another stick in loop de loops at post code 03. I tried every slot, no dice. two stick=no boot.
I also tried taking the video card and all accessories out. still nothing. 2 stick=nada. But super stable with one stick...
so help? ideas?
Is it the MOBO? or should I go try another power supply? At this point I do not believe it could be the RAM.

Hi,
This sounds like motherboard's CPU socket has some bent pins, so check this please. Few times just to make sure it's not a bent pin. If no bent pins, then ok, refit CPU but without cooler yet. Look around RAM slots, maybe while you've been fitting the cooler (if not intel's stock) you have hit board with screwdriver. So look for any sort of scratches/hits around RAM slots and CPU socket. Also try clearing CMOS >>Clear CMOS Guide<<
At last I'd try different power supply WITHOUT the GPU.

890FXA-GD70 problems with 4 stick of ram

I just built a new rig around the 890FXA-GD70 MB and everything is going great except I have major stability problems with 4 sticks of Ram installed. I purchased 4 sticks of G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 from Newegg. The PC will boot fine with all 4 sticks installed and Windows 7 recognizes them but I have a lot of application crashes. No BSOD so far but very frequent app problems. Even the windows event viewer keeps crashing while trying to troubleshoot. I removed two of the sticks and everything has been rock solid. Anyone else successfully running 4 sticks in this board or have any suggestions to stabilize? I'm not trying to overclock anything at the moment.
thanks,

I had similar issues with BSOD. I thought it might be my RAM. I tried all kinds of different settings. Tested it in another system. It worked flawlessly and passed all memtests. I took that RAM and the RAM from the other system (a DELL from work) home. Tried the Dell RAM out and no post. Tried one stick in DIMM2 and it worked stably and then tried two sticks and it worked stably. I then tried my memory (ADATA). I got one BSOD, but ran several memtests and burnin tests over the next 5 or 6 hours. No more issues. SWEET. Reinstalled windows. Ran great for 4 or 5 days and then got more BSOD. I contacted MSI support and on two separate occasions they suggested I RMA the board. I returned the board and got a different one. I've been happy since (no issues whatsoever). I even bought two more sticks of RAM. I'm just saying - maybe it's not your RAM. I can't say for certain that the 890FXA-GD70 was defective. It may just need more BIOS updates. Frustrating to say the least. I feel your pain.
AMD 1055t
MSI 890FXA-GD70 - flashed BIOS to 1.6 early on to try to fix RAM issues (didn't help) = RMA
ASUS M4A89TD PRO
ADATA 4x2gb DDR3 1600
Nvidia GTS 250 on loan from a friend until I select a card
Antec True Power 750w
WD caviar Black 750
Lancool PC-K62
Zalman CNPS10X Performa

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

I have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

i have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

Hi Tyler199869,
If you are having issues making or receiving calls after updating your iPhone, you may find the following article helpful:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Regards,
- Brenden

My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.

My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.
-My wifi connection is running strong
-All the devices run the same version of iOS

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Kernel Panic after installing 16 GB RAM in 2010 13" MacBook Pro

Hi
I have been having some problems with my 2010 13" MacBook Pro.
After installing 16 GB RAM, made by Corsair, I have had four Kernel Panics so far.
The thing is that the RAM are 1333 MHz, and my computer only takes 1066 MHz RAM. But I downclocked both the sticks to 1066 MHz, so it should work right? They also passed Memtest86, so I don't know what is wrong.
I also did a clean install of Mountain Lion, on a brand new hard drive, but I had another Kernel Panic.
Here is the latest log:
Interval Since Last Panic Report: 15729 sec
Panics Since Last Report:          1
Anonymous UUID:                    BAC8DBFE-5FBB-C8FA-FEFD-161B17915C50
Fri Feb 1 18:35:33 2013
panic(cpu 0 caller 0xffffff800c8b7bd5): Kernel trap at 0xffffff7f8e00e501, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffffffffff6cb6, CR3: 0x0000000025a0e000, CR4: 0x0000000000000660
RAX: 0xffffff7f8e058a80, RBX: 0xffffff81a6245000, RCX: 0x0000000000000001, RDX: 0x0000000000000020
RSP: 0xffffff81d3adbab0, RBP: 0xffffff81d3adbae0, RSI: 0x0000000020000001, RDI: 0xffffff81a6453000
R8: 0x0000000000000024, R9: 0x0000000000000000, R10: 0xffffff8031486284, R11: 0xffffff7f8dfb74c8
R12: 0xffffff81a643f000, R13: 0x0000000000000800, R14: 0xffffff81a660f000, R15: 0x0000000000000000
RFL: 0x0000000000010a03, RIP: 0xffffff7f8e00e501, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffffffffff6cb6, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81d3adb750 : 0xffffff800c81d626
0xffffff81d3adb7c0 : 0xffffff800c8b7bd5
0xffffff81d3adb990 : 0xffffff800c8ce4ed
0xffffff81d3adb9b0 : 0xffffff7f8e00e501
0xffffff81d3adbae0 : 0xffffff7f8dfb65f2
0xffffff81d3adbb30 : 0xffffff7f8dfb7578
0xffffff81d3adbba0 : 0xffffff800cc665b3
0xffffff81d3adbbc0 : 0xffffff800cc6718d
0xffffff81d3adbc20 : 0xffffff800cc64b8f
0xffffff81d3adbd70 : 0xffffff800c8981e1
0xffffff81d3adbe80 : 0xffffff800c820aed
0xffffff81d3adbeb0 : 0xffffff800c810448
0xffffff81d3adbf00 : 0xffffff800c81961b
0xffffff81d3adbf70 : 0xffffff800c8a5b16
0xffffff81d3adbfb0 : 0xffffff800c8ced53
      Kernel Extensions in backtrace:
         com.apple.GeForce(8.0)[2E56ED9A-D848-3795-9E52-56BABDC9000C]@0xffffff7f8dfab000 ->0xffffff7f8e06dfff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8cf 14000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8cf00000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8ce72000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8cebd000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000c600000
Kernel text base: 0xffffff800c800000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 7195773548951
last loaded kext at 6632145833: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f8e737000, size 36864)
last unloaded kext at 74564537026: com.apple.driver.AppleMCP89RootPortPM          1.11 (addr 0xffffff7f8e6bb000, size 24576)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.filesystems.autofs          3.0
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleLPC          1.6.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
System Profile:
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 16 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 840 Series, 120,03 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x06300000 / 2

ChFrMo wrote:
My Mac works just fine. It's just that once in a while, it gets a Kernel Panic. Usually when I'm using Safari, or playing a video.
I have taken these screenshots:
http://dl.dropbox.com/u/13478021/Screen%20Shot%201.png
http://dl.dropbox.com/u/13478021/Screen%20Shot%202.png
Getting a kernel panic once in a while is not my definition of "My Mac works just fine..."
You installed the incorrect ram. Get the ram specified for your computer. In theory ram should downclock to the computer's bus speed but in practice this does not always work, as you found out.

Kernel panics/crashes persistent, replaced HDD, RAM, Logic board

I have a 2010 white unibody macbook that for the first couple years of it's life gave me no issues whatsoever. Recently, I upgraded from snow leopard to mountain lion and replaced my stock apple 2G RAM for two 4G sticks I bought brand new. Everything ran great for a month or two, the memory was recognized right away, and worked fine (activity monitor displayed everything no issue whatsoever) even running a bootcamp partition, and doing lots of more memory heavy stuff like video editing.
Then I started getting weird issues, like safari or chrome randomly chrashing over and over again, or other apps refusing to even open. Then I started getting windows style glitches where the screen would lag in updating and bits of different app windows would migrate across the screen. Then I got several kernel panics in a row, at which point I figured it was time for action.
I booted from a USB OSX 10.8 install disk I made a while back and ran disk utility to try and repair the disk. Disk utility told me it was fine. I backed up and erased the disk, and tried to re-install.. but the primary process would fail some 4 minutes into the progress bar with no error report.
I gave up and went to the genius bar, where they ran some tests (which turned up nothing on the HDD) and had the same install failure. They figured there was something wrong with the HDD writing system or something, and replaced it with a brand new 500G. The install still failed. They sent it to the offsite repair facility, where they took out my aftermarket RAM and put a pair of brand new 1Gs in. They also replaced my logic board. The install worked, and I got a fresh copy of mountain lion. Everything worked fine as I booted up and started restoring things from my backup drive, other than the tiny 2G memory was pretty much full with the computer just sitting there with say, safari and mail open. So, I cracked it open and put my old-new 8G's of ram in. Worked fine all day yesterday and today. Then about an hour ago i got the same weird crashes and glitches, and then finally it just froze and I had to do a cold power-button shut down. I put the apple approved brand-spankin new RAM back in, but it won't even start up normally. I get the grey apple screen and a progress bar, and then it powers off. I started in recovery mode, which seems to work fine. I ran disk utility and tried to repair the disk, the process failed like a minute in and the error said that it couldn't be repaired and suggested I wipe the disk.
I'm really not sure what else could be wrong if theres a brand new motherboard, OS, HDD and RAM. HELP.

I have a 2010 white unibody macbook that for the first couple years of it's life gave me no issues whatsoever. Recently, I upgraded from snow leopard to mountain lion and replaced my stock apple 2G RAM for two 4G sticks I bought brand new. Everything ran great for a month or two, the memory was recognized right away, and worked fine (activity monitor displayed everything no issue whatsoever) even running a bootcamp partition, and doing lots of more memory heavy stuff like video editing.
Then I started getting weird issues, like safari or chrome randomly chrashing over and over again, or other apps refusing to even open. Then I started getting windows style glitches where the screen would lag in updating and bits of different app windows would migrate across the screen. Then I got several kernel panics in a row, at which point I figured it was time for action.
I booted from a USB OSX 10.8 install disk I made a while back and ran disk utility to try and repair the disk. Disk utility told me it was fine. I backed up and erased the disk, and tried to re-install.. but the primary process would fail some 4 minutes into the progress bar with no error report.
I gave up and went to the genius bar, where they ran some tests (which turned up nothing on the HDD) and had the same install failure. They figured there was something wrong with the HDD writing system or something, and replaced it with a brand new 500G. The install still failed. They sent it to the offsite repair facility, where they took out my aftermarket RAM and put a pair of brand new 1Gs in. They also replaced my logic board. The install worked, and I got a fresh copy of mountain lion. Everything worked fine as I booted up and started restoring things from my backup drive, other than the tiny 2G memory was pretty much full with the computer just sitting there with say, safari and mail open. So, I cracked it open and put my old-new 8G's of ram in. Worked fine all day yesterday and today. Then about an hour ago i got the same weird crashes and glitches, and then finally it just froze and I had to do a cold power-button shut down. I put the apple approved brand-spankin new RAM back in, but it won't even start up normally. I get the grey apple screen and a progress bar, and then it powers off. I started in recovery mode, which seems to work fine. I ran disk utility and tried to repair the disk, the process failed like a minute in and the error said that it couldn't be repaired and suggested I wipe the disk.
I'm really not sure what else could be wrong if theres a brand new motherboard, OS, HDD and RAM. HELP.

Kernel panics - apologies for yet another post but have tried many things

recently started getting regular kernel panics
so far I have:
- cleaned out inside for dust
- connected only keybd and mouse
- disk utility to repair permissions (and applejack)
- reset PRAM, NVRAM, SMU
- changed PRAM battery
- tried new RAM
reboots ok but within a couple of minutes I get the grey screens coming down and requirement to switch off power for a restart
Fans switch in within a minute or so for jet takeoff
temparatures of cpus currently = 46 / 44 / 46 / 46C (using XRG)
last error log
Sat Jan 1 00:04:33 2000
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x0000000000085D64
Latest crash info for cpu 0:
Exception state (sv=0x5c812c80)
PC=0x00085D64; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x00065230; R1=0x5C7B73E0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00065230 0x000688D4 0x0007295C 0x00072C40 0x000690F8
0x00318100 0x002C8868 0x002CBAC4 0x002CC2B4 0x002B248C 0x002CC9A4 0x002B248C 0x002CDA4C
0x002B0764 0x00BFC208 0x00BFC358 0x00C19D44 0x00C1E54C 0x00C11DF8 0x00C13F54 0x0036011C
0x0003F2A0 0x000B1DD4
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleBCM5701Ethernet(2.2.3b1)@0xc10000->0xc26fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x61c000
dependency: com.apple.iokit.IONetworkingFamily(1.6.1)@0xbf1000
com.apple.iokit.IONetworkingFamily(1.6.1)@0xbf1000->0xc0ffff
Proceeding back via exception chain:
Exception state (sv=0x5c812c80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x5c7f9c80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac11,2
System uptime in nanoseconds: 33066192352
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTopazAudio 2.5.8f1 - last loaded 956585363
com.apple.driver.AppleOnyxAudio 2.5.8f1
com.apple.GeForcePPC 5.4.8
com.apple.nvidia.nv40halppc 5.4.8
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.AppleTexasAudio 2.5.8f1
com.apple.driver.AppleTexas2Audio 2.5.8f1
com.apple.driver.PowerMac112ThermalProfile 3.4.0d0
com.apple.driver.AppleDACAAudio 2.5.8f1
com.apple.driver.AppleSCCSerial 1.3.2
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.IOI2CSMUSat 1.9d0
com.apple.driver.IOI2CLM7x 1.9d0
com.apple.driver.AppleUSBDisplays 2.0.2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AppleK2Driver 1.7.2f1
com.apple.driver.Apple_iSight 1.1.4
com.apple.driver.IOI2CMaxim6690 1.9d0
com.apple.driver.AppleSMUMonitor 1.9d0
com.apple.driver.IOI2CMaxim1631 1.9d0
com.apple.driver.AppleI2S 1.0.1f1
com.apple.driver.CSRUSBBluetoothHCIController 2.1.9f10
com.apple.driver.IOI2CPulsar 1.5.2d0
com.apple.driver.IOI2CControllerSMU 1.1.1d2
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleUSBHIDMouse 1.2.4b3
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.driver.CSRHIDTransitionDriver 2.1.9f10
com.apple.driver.PioneerSuperDrive 2.0.9
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATABlockStorage 2.0.6
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.iokit.IOATAPIProtocolTransport 1.5.0

struggling to get it to boot up now
even on the boot up process, its often moving to the 'take-off' fan noise before the login screen
if it does boot up then it doesnt last long before the grey screen/restart screen appears
I assume I can use the latest install disk for OSX? (10.5)
ethernet cable not connected, although I had been using ethernet for internet connection recently before relocating the machine
after having changed the PRAM battery, the date is no longer being retained (possibly wrong way around??)
slowly getting frustrated...

Constant kernel panics...is it RAM or external harddrives?

I have a Mac Pro that suddenly started kernel panicking all the time. I just bought two new external hard drives (those lacie lego ones) but most of the information I found online points to faulty RAM. I did install two 2MB Dimms this summer which I just removed...but I'm wondering if the hard drives could possibly be the culprit? Why would the RAM suddenly start causing trouble out of nowhere when it's been fine all summer/fall?
I know nothing about reading Kernel panic info. When I tested the hardware I got errors that said 4mem/6/4000006:0x7a469410 and then 4mem/6/4000006:0x7a927890 which makes me think that the culprit is indeed the memory.
Here is my current info after the dimms were removed:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 3 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Hardware UUID: 00000000-0000-1000-8000-0017F20BE20E
Here is the kernel panic from before the dimms were removed.
Interval Since Last Panic Report: 10512 sec
Panics Since Last Report: 8
Anonymous UUID: 3E1077DD-1204-42AA-9A2A-0E8864B0E284
Sun Nov 28 14:44:14 2010
Machine-check capabilities (cpu 1) 0x0000000000000006:
family: 6 model: 15 stepping: 6 microcode: 198
Intel(R) Xeon(R) CPU 5150 @ 2.66GHz
6 error-reporting banks
Machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0x1000000020000000 invalid
IA32MC1STATUS(0x405): 0x0000000000000000 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0x0020000000000000 invalid
IA32MC4STATUS(0x411): 0x0000000000000011 invalid
IA32MC5STATUS(0x415): 0xb200001080200e0f valid
MCA error code: 0x0e0f
Model specific error code: 0x8020
Other information: 0x00000010
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
panic(cpu 1 caller 0x2a9d27): Machine Check at 0x0105058d, thread:0xbf8e7a8, trapno:0x12, err:0x0,registers:
CR0: 0x8001003b, CR2: 0x00113000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x0beba140, ECX: 0x00000001, EDX: 0x00000000
ESP: 0x7434bc10, EBP: 0x7434bc48, ESI: 0x0be92000, EDI: 0x0105b388
EFL: 0x00000006, EIP: 0x0105058d
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x7ac28fb8 : 0x21b50c (0x5d42fc 0x7ac28fec 0x223974 0x0)
0x7ac29008 : 0x2a9d27 (0x595e34 0x595f21 0x105058d 0xbf8e7a8)
0x7ac290f8 : 0x2a1912 (0x1 0x3c3e7265 0x3e79656b 0x3c6e696d)
0x7434bc48 : 0x1045fc0 (0x7ab8e0a4 0x1 0xbe92000 0x0)
0x7434bd38 : 0x104751c (0x1c319999 0x80000008 0x0 0x0)
0x7434bdf8 : 0x2abb32 (0xffffffff 0x7fffffff 0x7434be38 0x7ab9d000)
0x7434be18 : 0x22584d (0x7ab9d49c 0x1c3196d7 0x8 0x7ab9d488)
0x7434be78 : 0x22661f (0x1 0xbf8e7a8 0xbebc884 0x1)
0x7434bee8 : 0x227243 (0xbf8e7c4 0x0 0x1 0x4ff931)
0x7434bf58 : 0x2272c4 (0x22fc20 0x863ea0 0x0 0x2a358d)
0x7434bf78 : 0x22fdba (0x22fc20 0x863ea0 0x0 0x0)
0x7434bfc8 : 0x2a06cc (0x863ea0 0x0 0x10 0xccac684)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(105.13.0)@0x1044000->0x1061fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)
System uptime in nanoseconds: 34843396724
unloaded kexts:
(none)
loaded kexts:
com.macvide.driver.MacVideAudioConnectorDriver 1.0.0
at.obdev.nke.LittleSnitch 2.2.05
com.apple.driver.InternalModemSupport 2.6.2 - last loaded 30772322309
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.GeForce 6.2.4
com.apple.driver.AppleUSBDisplays 283
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.driver.PioneerSuperDrive 2.5.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleIntel8254XEthernet 2.1.1b7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleUSBUHCI 4.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHDAPlatformDriver 1.9.9f12
com.apple.driver.AppleHDAHardwareConfigDriver 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.nvidia.nv40hal 6.2.4
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleUSBHIDKeyboard 141
com.apple.driver.AppleHIDKeyboard 141
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 7 GB, SMC 1.7f10
Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 256 MB
Memory Module: global_name
Network Service: Ethernet 2, Ethernet, en1
PCI Card: NVIDIA GeForce 7300 GT, Display, Slot-1
Serial ATA Device: WDC WD2500AAJS-41RYA0, 232.89 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd400000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd420000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd300000
USB Device: My Book 1110, 0x1058 (Western Digital Technologies, Inc.), 0x1110, 0xfd340000
USB Device: Hub, 0x05ac (Apple Inc.), 0x9131, 0xfd330000
USB Device: USB2.0 PC CAMERA, 0x18ec, 0x3290, 0xfd331000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9223, 0xfd332000
USB Device: USB OPTICAL MOUSE, 0x15d9, 0x0a4c, 0x5d100000
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, Unknown
< Edited by Host >

Run AHT for one thing, like you did, and then heed its results (though only Apple has a list of the codes).
Read through excellent FAQs on kernel panics.
Sure it can be RAM, or USB and FW cables and devices like those LaCie units.
RAM fails, can be bad, marginal, have soft errors, same as hard drive sectors can also.
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
http://www.thexlab.com/faqs/kernelpanics.html
http://reviews.cnet.com/8301-13727_7-10344626-263.html
http://www.macmaps.com/kernelpanic.html
Get the RAM replaced. It could also have resulted in writing garbage or a freeze could leave the file system and drive directory corrupt.

Downgraded 2 Macs from Leopard to Tiger. Kernel panics on both now.

I'm prepping a couple of G4's to sell on Craigslist. I downgraded a 1.67 GHz PowerBook G4 from Leopard to Tiger using the original disks that shipped with the laptop. The other Mac was a dual 1.46 GHz (FW800) PowerMac G4 tower - again, from Leopard to Tiger, but using a retail copy of Tiger. Both machines were running perfectly prior to the downgrades, albeit a little slow - which is why I chose to downgrade them both to Tiger. The installations went smoothly, but now they BOTH have kernel panics within a few minutes of logging on.
I've reformatted both discs using the secure 7-pass option, have swapped out the memory, and have run Disk Utility, Disk Warrior 4, and Tech Tool Pro 5 without so much as a hiccup in an attempt to find a problem with the hardware - although actually finding hardware errors on both machines would have been extremely coincidental, if not downright creepy.
I haven't run the Apple Hardware Test in loop mode yet, but I must admit that I don't believe the problem is with the hardware - particularly since both machines were is use right up until the downgrade. I'll be taking a look at the panic logs on both machines next, but thought I'd post this just in case anybody else has had the problem (and hopefully found a solution).
Anybody...anybody?

HotHead:
I haven't run the Apple Hardware Test in loop mode yet, but I must admit that I don't believe the problem is with the hardware - particularly since both machines were is use right up until the downgrade
Doesn't seem to be likely. On the other hand, you have reformatted and secure erased the drives, and have run powerful diagnostic tools on the directories with nothing showing up, so a software based issue seems just as unlikely.
I'll be taking a look at the panic logs on both machines next
That will be helpful.
cornelius

Kernel Panic on Snow Leopard 10.6.5 with kernel 64 bit

After I upgraded to 8 Gbyte my MBP 5,5, I worked fine with kernel at 32 bit. I've just done an experiment switching the kernel to 64 bit.
After some time, I get a kernel panic like the following:
Tue Nov 30 23:39:50 2010
panic(cpu 1 caller 0xffffff8000224cc3): "pmapflushtlbs() timeout: " "cpu(s) failing to respond to interrupts, pmap=0xffffff800067d900 cpusto_respond=0x1"@/SourceCache/xnu/xnu-1504.9.17/osfmk/x8664/pmap.c:2710
Backtrace (CPU 1), Frame : Return Address
0xffffff80be79b8c0 : 0xffffff8000204b99
0xffffff80be79b9c0 : 0xffffff8000224cc3
0xffffff80be79ba30 : 0xffffff800022643e
0xffffff80be79bab0 : 0xffffff800021b0f9
0xffffff80be79bb20 : 0xffffff8000218065
0xffffff80be79bc20 : 0xffffff8000218467
0xffffff80be79bc50 : 0xffffff80002a5907
0xffffff80be79bd60 : 0xffffff80002750d9
0xffffff80be79be30 : 0xffffff800029278a
0xffffff80be79be60 : 0xffffff80002053ba
0xffffff80be79be90 : 0xffffff80002029eb
0xffffff80be79bef0 : 0xffffff8000273736
0xffffff80be79bf60 : 0xffffff80002c2099
0xffffff80be79bfa0 : 0xffffff80002e2964
BSD process name corresponding to current thread: activitymonitord
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:19:13 PDT 2010; root:xnu-1504.9.17~1/RELEASEX8664
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 1737909615228
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xffffff7f807b4000, size 0x8192) - last unloaded 219360805155
loaded kexts:
com.parallels.kext.prl_vnic 6.0 11828.615184
com.parallels.kext.prl_netbridge 6.0 11828.615184
com.parallels.kext.prlusbconnect 6.0 11828.615184
com.parallels.kext.prlhidhook 6.0 11828.615184
com.sophos.kext.sav 7.2.0
com.parallels.kext.prl_hypervisor 6.0 11828.615184
com.apple.driver.AppleBluetoothMultitouch 54 - last loaded 1501290340467
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AudioAUUC 1.13
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 364
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleIntelPenrynProfile 17.1
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.nvenet 2.0.15
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.driver.AppleBacklight 170.0.34
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.GeForce 6.2.4
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleUSBOHCI 4.1.5
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 364
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.nvidia.nv50hal 6.2.4
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41.4
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Can anyone suggest me any idea about this kernel panic?
I do not guess that the problem is on the RAM. At 32 bit the MBP works perfectly!

Most likely this: com.sophos.kext.sav 7.2.0
See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Kernel Panic, Restored System Using Time Machine but Problems Still Persis

SOS! Please, please, please help. I'm at a loss here. I have an 300 GB iMac with a 32 GB partition for Windows. I backup to an Iomega UltraMax 500 GB external hard drive. Let me know if more info is needed. I went through the checklists to resolve a kernel panic, and nothing has been working. Here's the background:
I recently encountered a kernel panic (I saw the screen discussed in the "What is a kernel panic?" article). It started when Firefox 3.2 beta was running. It froze and eventually the system froze. I repaired disk permissions, and I was able to boot up, but it took awhile to boot up. Some things weren't right once it was booted; I lost some keyboard functionality, system settings (screen saver, display settings, etc), etc. I attempted to repair the disk (using disk utility while booted from leopard install disc), but it failed (generated an error, said it couldn't repair disk). So I did the next thing and restored the system from Time Machine. Things seemed to be alright.
And about a couple days later, Time Machine starting encountering errors and failed to backup (it failed while attempting to backup 300 MB). The system also started to get slower, and it eventually froze. So I restored again from Time Machine. Seemed to be alright, but again it eventually slowed and started freezing.
I can't retrieve the panic log. I think it was erased with one of my system restores. I went into Time Machine to look for it, and it's nowhere to be found.
So, I tried to repair my disk permissions. That succeeded. But the disk repair failed again. I restored again from Time Machine. Same thing: things seem okay, but Time Machine isn't able to back-up (it's pretty much non-responsive, even after I told it to stop, it just says "stopping"), things are a bit slow and some applications are unstable (Firefox crashed for no apparent reason). I just found this under /Library/Logs/Crash Reporter:
Process: ReportCrash [467]
Path: /System/Library/CoreServices/ReportCrash
Identifier: ReportCrash
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2009-03-12 11:05:40.590 -0400
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x0000000000366000
Crashed Thread: 1
Thread 0:
0 libSystem.B.dylib 0x946eb226 semaphoretimedwait_signaltrap + 10
1 libSystem.B.dylib 0x9471d1ef pthread_condwait + 1244
2 libSystem.B.dylib 0x9471ea73 pthreadcond_timedwait_relativenp + 47
3 com.apple.Foundation 0x9417275c -[NSCondition waitUntilDate:] + 236
4 com.apple.Foundation 0x94172570 -[NSConditionLock lockWhenCondition:beforeDate:] + 144
5 com.apple.Foundation 0x941724d5 -[NSConditionLock lockWhenCondition:] + 69
6 ReportCrash 0x0000a3eb 0x1000 + 37867
7 ReportCrash 0x00002466 0x1000 + 5222
Thread 1 Crashed:
0 com.apple.Symbolication 0x0007d903 -[VMUMemoryView_Native uint32] + 245
1 com.apple.Symbolication 0x000765c8 +[VMUHeader headerWithUniverse:memory:name:path:timestamp:] + 147
2 com.apple.Symbolication 0x000763d4 +[VMUHeader extractMachOHeadersFromHeader:matchingArchitecture:considerArchives:] + 285
3 com.apple.Symbolication 0x0008acbb extractHeaderWithSignatureFromDisk + 397
4 com.apple.Symbolication 0x00085314 -[VMUSymbolicator faultLazySymbolOwnerAtIndex:] + 189
5 com.apple.Symbolication 0x00087b5a -[VMUSymbolicator forceFullSymbolExtraction] + 183
6 com.apple.Symbolication 0x0008749f -[VMUSymbolicator symbolOwners] + 39
7 ReportCrash 0x000041e3 0x1000 + 12771
8 ReportCrash 0x00002eef 0x1000 + 7919
9 ReportCrash 0x000094a2 0x1000 + 33954
10 ReportCrash 0x0000b5d4 0x1000 + 42452
11 ReportCrash 0x0000b121 0x1000 + 41249
12 libSystem.B.dylib 0x9474803b machmsg_serveronce + 416
13 ReportCrash 0x0000a828 0x1000 + 38952
14 libSystem.B.dylib 0x9471c095 pthreadstart + 321
15 libSystem.B.dylib 0x9471bf52 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x946eb1c6 machmsgtrap + 10
1 libSystem.B.dylib 0x946f29bc mach_msg + 72
2 libSystem.B.dylib 0x94747fd9 machmsg_serveronce + 318
3 ReportCrash 0x0000a828 0x1000 + 38952
4 libSystem.B.dylib 0x9471c095 pthreadstart + 321
5 libSystem.B.dylib 0x9471bf52 thread_start + 34
Thread 1 crashed with X86 Thread State (32-bit):
eax: 0x00366000 ebx: 0x0007d832 ecx: 0x00000000 edx: 0x00000004
edi: 0x00000000 esi: 0x001b28d0 ebp: 0xb00807d8 esp: 0xb0080780
ss: 0x0000001f efl: 0x00010297 eip: 0x0007d903 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00366000
Binary Images:
0x1000 - 0xdfff ReportCrash ??? (???) <e97e4b832cee3d343e3ff627defb41d3> /System/Library/CoreServices/ReportCrash
0x6f000 - 0xb3ffb com.apple.Symbolication 1.0 (35) <70dc2274da04c58fe0cd09dee25b5507> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
0x901cd000 - 0x9039bff3 com.apple.security 5.0.4 (34102) <55dda7486df4e8e1d61505be16f83a1c> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x904ee000 - 0x907c8ff3 com.apple.CoreServices.CarbonCore 786.11 (786.11) <f06fe5d92d56ac5aa52d1ba182745924> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x909a5000 - 0x90a2cff7 libsqlite3.0.dylib ??? (???) <6978bbcca4277d6ae9f042beff643f7d> /usr/lib/libsqlite3.0.dylib
0x910d0000 - 0x9114fff5 com.apple.SearchKit 1.2.1 (1.2.1) <3140a605db2abf56b237fa156a08b28b> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x914d0000 - 0x914d2fff com.apple.CrashReporterSupport 10.5.5 (159) <4ca9b6643fcbafd76424a46d162363eb> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x91656000 - 0x91789fff com.apple.CoreFoundation 6.5.5 (476.17) <4a70c8dbb582118e31412c53dc1f407f> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x9178a000 - 0x917e7ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x923d2000 - 0x923e8fff com.apple.DictionaryServices 1.0.0 (1.0.0) <ad0aa0252e3323d182e17f50defe56fc> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x92a28000 - 0x92ae2fe3 com.apple.CoreServices.OSServices 226.5 (226.5) <2a135d4fb16f4954290f7b72b4111aa3> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x93184000 - 0x93264fff libobjc.A.dylib ??? (???) <7b92613fdf804fd9a0a3733a0674c30b> /usr/lib/libobjc.A.dylib
0x93352000 - 0x9348aff7 libicucore.A.dylib ??? (???) <18098dcf431603fe47ee027a60006c85> /usr/lib/libicucore.A.dylib
0x934d1000 - 0x934fcfe7 libauto.dylib ??? (???) <42d8422dc23a18071869fdf7b5d8fab5> /usr/lib/libauto.dylib
0x9389b000 - 0x93938fe4 com.apple.CFNetwork 422.15.2 (422.15.2) <80851410a5592b7c3b149b2ff849bcc1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x939b4000 - 0x939e3fe3 com.apple.AE 402.3 (402.3) <4cb9ef65cf116d6dd424f0ce98c2d015> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x94122000 - 0x9439dfe7 com.apple.Foundation 6.5.7 (677.22) <8fe77b5d15ecdae1240b4cb604fc6d0b> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x943d6000 - 0x944b7ff7 libxml2.2.dylib ??? (???) <d69560099d9eb32ba7f8a17baa65a28d> /usr/lib/libxml2.2.dylib
0x946ea000 - 0x94851ff3 libSystem.B.dylib ??? (???) <d68880dfb1f8becdbdac6928db1510fb> /usr/lib/libSystem.B.dylib
0x94852000 - 0x94859ffe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib
0x94ab1000 - 0x94b3dff7 com.apple.LaunchServices 290.3 (290.3) <6f9629f4ed1ba3bb313548e6838b2888> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x94c36000 - 0x94c7ffef com.apple.Metadata 10.5.2 (398.25) <e0572f20350523116f23000676122a8d> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x94cef000 - 0x94cf3fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x962da000 - 0x962e2fff com.apple.DiskArbitration 2.2.1 (2.2.1) <75b0c8d8940a8a27816961dddcac8e0f> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x96731000 - 0x967bcfff com.apple.framework.IOKit 1.5.1 (???) <f9f5f0d070e197a832d86751e1d44545> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x967c5000 - 0x967e9fff libxslt.1.dylib ??? (???) <0a9778d6368ae668826f446878deb99b> /usr/lib/libxslt.1.dylib
0x967ea000 - 0x967f1fe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x96802000 - 0x96810ffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x96c22000 - 0x96c59fff com.apple.SystemConfiguration 1.9.2 (1.9.2) <8b26ebf26a009a098484f1ed01ec499c> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x96ea7000 - 0x96ea7ffa com.apple.CoreServices 32 (32) <2fcc8f3bd5bbfc000b476cad8e6a3dd2> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib
Windows XP ran fine from my other partition at this point. I'm wondering if my Windows partition has something to do with it (I chose FAT32 instead of NTFS file system)?
Please help. Will erasing the drive, reinstalling from the leopard disc (10.5.4), and restoring select applications/folders/files help, instead of from a system restore from Time Machine?
Your help is immensely appreciated!

Thanks for responding.
So under the partition tab, I should reformat to one partition, reinstall Leopard, and see what happens from there? Selectively restore applications, music, pictures to my system once it's reinstalled and properly updated? Anything else I may need to do or restore?
Why not reformat under the erase tab, zero out the disk, and reinstall? Any difference?
Just a little worried and unsure is all. If it's a hardware thing, I can accept that and take it in to be serviced. But, if it is a software issue, I don't want to do any irreparable harm during the erase-and-reinstall process. Just want to make sure I get it right.
Message was edited by: Immolate

Kernel panics with both sticks of RAM but with either

Similar Messages

Maybe you are looking for