Keystore config error: keystore entry alias is not specified

Hi all,
I have been using the java keytool to genkey, do certreq and import the signed cert so far. I am now at the stage of using WebLogic admin console to configure the keystore to use this keystore.
I am using WLS9.0. At the Keystore Config page, i choose Keystore to be "Custom Identity store and java standard trust store". The following is the identity store settings:
store location=/.keystore
store type=jks
store passphrase=xxxx
However, i encountered the following error messages: "Cannot retrieve identity certificate and private key on server AdminServer, because the keystore entry alias is not specified"
I looked up the weblogic's error messages list. It indicated that the problem can be corrected by specifying the alias in the SSL config. However, i could not find such an entry at the Admin Console.
Does the "alias" here mean the one we use in the keytool argument, eg. keytool -genkey -alias abc? Anyone has encountered this error message before? or can help to point out where i can specify this key alias?
Regards,
Celine

Celine,
Have a look at the SSL tab (next to the Keystores tab). You'll need to specify some data there including the private key alias. Yes, the alias is the same one you used with keytool.
Hope this helps.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Similar Messages

ABAP Native SQL error: "INTO ..." not specified. OO context no longer supported.

FUNCTION Z_RAMZY1.
dear I am working with ABAP (new developer)
SAP ECC 6
i am trying to create SQL Native and i am facing this error: ""INTO ..." not specified. OO context no longer supported."
i know SQL Open but i want to try the native mode too.
thanks,
*"*"Local Interface:
DATA: BEGIN OF GetData,
        FKDAT1(10) Type N,
        Month Type I,
        Year Type I,
        Day Type I,
        LowerName(100) TYPE C,
      END OF GetData.
EXEC SQL PERFORMING LOOP_OUTPUT.
Select Top 1000
FKDAT as FKDAT1,
Month(FKDAT) as [Month],
Year(FKDAT) as [Year],
Day(FKDAT) as [Day],
Lower(ERNAM) as LowerName
INTO: GetData
From VBRK
Where (Month(FKDAT) = 2)
ENDEXEC.
FORM loop_output.
WRITE: / GetData-FKDAT1, GetData-Month, GetData-Year, GetData-Day, GetData-LowerName.
ENDFORM.

i did this :
wa-fieldname = 'Month '.
wa-seltext_m = 'nMonth '.
APPEND wa TO fieldcatalog.
CLEAR wa.
* "2
wa-fieldname = 'Year '.
wa-seltext_m = 'nYear'.
APPEND wa TO fieldcatalog.
CLEAR wa.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    IT_FIELDCAT = fieldcatalog
TABLES
    T_OUTTAB    = GetData.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
the result is empty.
it returns the columns but the result is empty.
please advise.
thanks,

Backflush error : TFBEFU_CR: entry 10 does not exist

Hi,
while backflushing the following error is appearing :
Check table TFBEFU_CR: entry 10 does not exist
Message no. M7001
What's missing. ? custo ? T-code ?
Thanks.

Hi,
Please check Transaction OPK9 whether a valuation variant has been stored, or else check with your CO consultnat.
Regards,
satyajit

QT 7 gives install error prcedure entry point could not be located

Installed QT7.
When I tried to start it, got message
Procedure entry point CFUniCharGetNumberofPlanesforUnicodePropertyData
could not be located in the Dynamic Link Library QTCF.dll
followed by
Quick Time failed to initialize Error# - 2093

Thank you Georgia!
Those look okay. QuickTime.qts and QuickTimeVR.qtx are QuickTime files that are supposed to be there. qtintf.dll is a Delphi-Qt2.x Interface Library. Quick.IME is an input manager used to display East Asian language on the PC, and QUTIL.dll is associated with your quarantine utilities for your Windows filewalls.
So if there isn't a misplaced QTCF.dll, there might be damage to the one in the right place. So we'll try a repair install again, taking a few extra explicit precautions this time.
Restart the PC. Do not open any applications after the restart. Disconnect from the internet and/or your network. Now switch off all your security software (firewall, antivirus, antispyware).
Now navigate to C:\Program Files\QuickTime\QYSystem\ and drag the QTCF.dll out onto your desktop.
Now open your "Uninstall a program" control panel. Select QuickTime and click "repair".
Reenable all your security software prior to reconnecting to the internet and/or your network.
With the fresh QTCF.dll in place, does QuickTime now launch without the error message?

Error massege m7000 "Entry 7030000144 00001 not in table XACCOUNTING_CR"

Hi Experts,
I created a service PO with one line item and i want to post service entry sheet with multiple account for same PO, when i am trying to post service entry sheet that time i am facing below error.
Entry 7030000144 00001 not in table XACCOUNTING_CR (system error)
Message no. M7000
Diagnosis
Internal error.
Procedure
Inform the person responsible for programming or your system administrator.
pl. guide me how can i resolve this issue.
Regards,
AM

Hi,
Consult with your BASIS person make necessary changes as instructed in SAP note 1386249 "MAA: Entry is not in table XACCOUNTING (system error)"
The reason is only seeing cannot be implemented is not enough so you need to ask your BASIS guy
as the note clearly says
Solution
The corrections are delivered with the relevant Support Packages.
If you require these corrections in advance,
correct the source text in accordance with the correction instructions.
In addition, you have to add missing entries to the table EKBE_MA using the attached
correction report.
Links to Support Packages
Software Component .....Release........... Package Name
SAP Application................. 604................ SAPKH60406

Entry point is not defined

Hi all,
Im doing an File to Proxy scenario, in the R/3 side im getting the error as "Entry point is not defined", can anyone suggest as what to do to resolve this issue.
Regards
Archanaa

hi ,
please register your queue using 'smqr' transaction.
regards,
pradeep A.

Security Update - now can't connect to external drive - The alias could not

Hi, I loaded the new security update and now cannot connect to my external hard drive connected to my Airport Extreme. It sees the network and tries to mount the drive, but they I get an error saying "the alias could not be found...." I can't get further.
Anyone have any ideas? Or I can I set up the external drive again?
Thanks!

i'm getting the same error trying to connect to either my imac or a lacie 2big ethernet raid drive. the first time i got this error was after connecting my other ibook to the imac as one of my other users. since then, my main ibook throws this error on every connect attempt.
weird thing is the mount succeeds. the shared files are accessible. the mount can even be "ejected". but each connect throws this "error code -35" popup. additionally, none of my machines has spaces in its system name or in its shared directories. just simple names like store2big, itunes, jeeeem, etc. most baffling.

Entry DE does not exist in table T005E

Dear all
I create Plan ( module PP ) when i input values in field Country " DE " is error . " Entry DE does not exist in table T005E " .Plz help me
Thanks and Regard ,
Lan nguyen

Dear,
Please check the entry of DE
In SPRO -> SAP NetWeaver-> General Settings-> Set Countries-> Insert Regions
In this table we maintain the regions for the Country.
Please refer the OSS Notes : 107588, 122292, 161359
Regards,
R.Brahmankar

Message Entry MK001 does not exist in T499S-

Hi,
Would like to seek for your help as i have try to configure new fix
asset location in T-code:OIAS and successfully save it however when i
select the new location in the time dependent tab in the asset master
it prompt me an error message Entry MK001 does not exist in T499S-
check your entry.
Please advise whether i have miss out the step or the SAP system bug
and I am using Sap R/3 version 4.7 level 31 patch.
Please advise.
thank you.

Hi,
Please check the below thread, in which i have specified few SAP notes, which might sort your issue.
[AS02 : Location entry not possible in Timedependent tab;
Please check the attached notes too.
Thanks,
Srinu

The account password was not specified. Error after setting up a second Crawl Database and Crawler on different server.

We have a three server farm. (SPWebTest, SPAppTest, SPDBTest)
We have added an additional database server (SPDBRMTest) and an additional application server (SPAPPRMTest).
Today I created a new Crawl Database on SPDBRMTest and a new Crawler on SPAPPRMTest.
I create a distribution rule to all crawling activity for 1 web application to the new crawl database on SPDBRMTest.
This web application was part of the original crawl and had no errors or issues. We are trying to scale our Search to improve performance but when a full crawl is executed against this content source I get the following crawl error:
"The account password was not specified. Specify the password."
I have tried re-entering the "Default Content Access Account" but the issue continues.

Hi Brian,
when you add the crawl rules, do the account that is provided have the permission to read the content at the web application?
http://technet.microsoft.com/en-us/library/jj219686(v=office.15).aspx
please disable the loopback check, perhaps it may help:
http://support.microsoft.com/kb/896861
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SEM-BCS: Error source currency is not specified

Hi,
I was testing period 5 fy 2007 in a sandbox system for elimination of inter-unit profit and loss in inventory and got this error message: source currency not specified.
Please help what is wrong. Thank you.

Hi Eugene,
Yes, we load the data via flexible load and it will reflect in inventory data and supplier data ODS/DSO.
Once loading is done for both inventory and supplier data in our usual manner, we are now ready to execute I/U elim P/L.
But encountered an error saying "source currency is not specified". Diagnosis: You want to translate a source key figure into target key figure. However, you did not specify a currency key for the source key figure"
This is the error message.
Thank you.

Absolute url not specified

Hi,
We had installed the Business Package for PPMDC (Business Package for Projects,Portfolio Management and Design Collaboration).
While navigating to the portal on the Design Collaboration ->Collaborative Scenarios, and creating Collaborative Scenarios and clicking Save .
We get the following error:
The absolute url was not specified in the system administration (network tab).
Also it also shows :
Refer to the installation document First Steps with cFolders, which we do not find.
Kindly assist me with this.
Regards,
Radeesh V

Hi in the cFolders screen, go to the network administration link and in that go to network tab and enter the following:
Proxy server name: http://servername (check with your basis)
Proxy port number: xxxx (check with your basis)
absolute url of the application: http://server:portname/cfolders/cfx_rfc_ui
thanks
p.s. If you are satisfied with the reply please reward.

J2EE host or port not specified; define them under "System Settings"

HI
Iu2019m facing the issue with SOAMANAGER
In transaction SOAMANAGER we configure the endpoints(service and binding) for the provider
and try test with Open Web Service navigator for selected binding under overview tab
Its Showing the Error:
J2EE host or port not specified; define them under "System Settings"
please help me to resolve this issue.
Thanks
Vadde

Issue resolve
trtransaction SOAMANAGER --> System Global settings -->Access J2EE server --> here we need to specify the Java host name and Port number
Thanks
Vadde

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

Error message: Entry 1 WC 99 does not exist in T508A (check entry)

Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error. In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
I went to the table using se16 but could not make out how I can input those entries in the table....
Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

Keystore config error: keystore entry alias is not specified

Similar Messages

Maybe you are looking for