KP06 issue

Hi Gurus,
I created some new cost centers, specifically 43205, it was a copy of 43201
43201 and 43205 are in the cost ctr group s000588.
Running kp06 for 43201: Gives me the Planned Values
Run KP06 for 43205: Give me the Planned Values
Running KP06 for cost center grp s000588:
It only shows the number for 43201and 43205 seperately and not 43201+43205
Can you please let me know why? If not can you please let me know where i can find this request.
I will assign good points.
thanks,
Prashant

Hi Prashant,
You can runa cumulative plan report for cost center group wise thru T.code KSBP.
You need to integrated planned line items for the version and fisacl year first.
Hope this helps.
Thanks
Vamsi

Similar Messages

Funtional Area issue in KP06

We have customized a planning layout in KP06, where we want to capture Actual cost along with planned figure. Actuals will be in display mode only at the time of making planning.
Since we are also using functional area which is also defined in cost center master we are facing a problem where we are not getting the actual cost in case the document contains functional area either through cost center or cost element master. Only those doumcuments are captured in actual cost column where functional area is blank.
The problem is there only when we are using KP06 (Cost center planning) layout to have the actual cost as well so that user can view the actual cost at the time of putting the planned values. In this layout actual cost is not coming, if the controlling douments contains functional area, even it is appearing in all SAP standard report's.
Any solution in this reard will be of great help
Thanks in advance
Aseem Arora

Check this note 902985
This problem is caused by a program error. However, the error only occurs when the cost-of-sales accounting (and the update of the functional area) is active.
Check also note 431167 which advises that not all transactions can be shown in actual.
In particular, this means that during the course of Primary cost planning only the business transactions COIN (External postings), RKU1, RKU2, RKU3 (Manual repostings), KAZI (Accrual calculation), KOAO (Settlement of primary costs), KZPI (Overhead rates), are taken into account

Error while uploading cost element planning data into KP06 transaction

Hi,
I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
Error accured when generating data for the planning processor
Messange no.K9400
Revenue element 451000 can not be planned on cost center 9720
Thanks
Kishore

The cost element which have category 01 only can be planned in the Kp06.
Regards
Ranjan

Erro while saving KP06, system gives error message

I have a issue with cost element planning.
When requester is processing the transaction KP06, and he tries to save it, the system gives message stating Ledger 0 has fiscal year variant instead of V3
Details of message is
Ledger 0 has fiscal year variant instead of V3
Message no. GI 174
Diagnosis
When transferring planning data, the receiver ledgers must have the same fiscal year variant as the sender system, since all planned periods are transferred and not just one period with a posting date. Therefore, the period cannot be converted.
Procedure
Compare the fiscal year variant of the sender system with the FI-SL fiscal year variant.
You can access this in FI-SL Customizing by choosing Basic Settings Master Data -> Ledger (select the ledger specified in this message) -> Assign Comp.Cd/Comp. -> After selecting the company code, the system displays the assigned fiscal year variant.
Note u2013 Although error is a u2018Greenu2019 error system is not allowing to post transaction.
Although special purpose ledger is activated for LOCAL LEDGERS (i.e. for company code) and one of company code has been assigned).
However Special Purpose ledger for this company code is not activated hence according to me there is no need to assign company code in special purpose ledger customizing.
Please help

Hi,
In case of Active Integrated Planning, the Customization of all integrated Special Purpose Ledger has to match the Customizing in CO. If you want to copy plan data from CO into a ledger, the fiscal year variants must match.
You need to correct the settings or deactivate the corresponding Ledger.
Pls refer the SAP Notes : 433367 and 745240, you should be able to solve the problem.
Pls revert back with update...
Srikanth Munnaluri

KP06 Cost center Planning

HI all we have a issue with KP06 Plannig to Cost centers and Cost elements,using Excel Upload option we have
our own layout maintained in KP66 ,report painter and assigned the same in to Planning layout,
it shows uploaded correctly in kp06 but some how doesn't show any values or some time only few values out of 12 months,
Please help me ,
Thank you ,
Sandhya

Hi,
It is hard to tell where the problem is, since you say the log shows the upload successful. I think some of the data which you see as uploaded may be entered manually by someone and may not be from your upload.
I suggest you try the following (am not sure if already tried this), instead of creating the file from scratch:
1. KP06 > Enter your parameters.
2. Click on Overview (<F5>).
3. Confirm macro warning with u201Cactivate macrosu201D if this message appears.
4. Delete last line Cost Element Total. If necessary remove Excel worksheet protection for deleting these entries.
6. From the menu, choose File -> Save Copy As and save the file as *.csv or *.txt.
7. Make necessary changes to the file.
8. Choose Extras -> Excel Planning -> Upload.
9. Note that last line cost element (total) must be deleted in the file.
Check the log...if successful check the report KSBL.
Hope this helps.
PS: Please don't open multiple threads for the same issue...

Upload file fialed in KP06

Hello ,
While uploading the cost center plan in KP06 , i am gettig the upload error failed mesage. The detailed error mgs is as follows
Errors occurred during testing for field "Cost Center".
Message no. K8011
Diagnosis
The SAP System could not determine any valid characteristic values in the planning period for characteristic Cost Center.
System Response
The system does not accept the entries.
Procedure
Choose Extras -> Error log -> Master data to see the cause.
There is an explanatory long text for each error listed in the log.
Kindly help me to solve this issue
Thanks

Hi,
Please check the upload file for the cost center values.. Please confirm their existence/ completeness / validity for the period plan data is being entered. As suggested please go through Extras -> Error Log to identify the errors
Trust this helps.
Cheers!!

Report Writer Issue - Revenue Cost Element - After Upgrade.

Hello ,
   After upgrade some of the report writers are not pulling up all the plan data.
   I found out that the revenue cost elements (cost element category - 11) are not being pulled by
   report writer in ECC 6.00, where it used to pull them in 4.6C. These postings were done to
   our budget version using KP06.
   These revenue cost elements postings are not stored in COSP. I dont have any idea in which tables
   they are stored.
   Does anyone have any clue about this.
Thanks,
Sandeep

Its a report writer report developed here..(not standard one)
The cost center is a revenue cost center. So when we post our revenues we post it to this revenue cost center.
The issue is in 4.6C env it used to pull this data, but in 6.00 it is not pulling.....
Thx,
Sandeep

Costcenter planning issue

hi guys,
I am facing with a problem like when i am trying to use the t.code: KP06 To use the cost center planning it is asking for a planner profile. i had tried to use the default profiles but it is giving an error like Entry does not exist in TKA50 (check entry).
Please tell me how to solve the issue.

Dear,
Use Path
SPRO > Controlling > Cost Center Accounting > Planning > Manual Planning > Define User-Defined Planner Profiles.
Select the profile you want and click on General Controlling.
Select Cost ctrs: Cost element/activity inputs then click on Layout for Controlling and enter layout created by you or enter any existing one.
Once you have done all settings here go to KP06 and use SETTINGS > SET PLANNER PROFILE and enter the profile you maintained settings for.
Regards,
Chintan Joshi.

Delete cost element in KP06 planning

Dear all,
I am facing the issue in cost run:
Our scenario is like below we done cost element planning for cost center activity type cost element combination(kp06) due to mistake user defined the cost element which is not relevant for activity price calculation after that i run the plan price calculation(KSPI) here i found the warning message "Cost element is not assigned to cost component structure, if i will ignore this message my cost component view and itemization view won't match. So i deleted the cost element value from KP06 , but when i execute the kspi same message is appeating.
1) Please advise me how to delete the cost element from kp06 resulting it wont appear in kspi.
Regards,
Ravi.

Hello Ravi,
I repeatedly used the following programms Ajay might refer to.
First guess: xx29 might help.
"Best practice?": I would not call it best practice. At least it is SAP-reports and not
customer-specific reports.
I hope it helps.
With kind regards
Thomas
RKPLNC18
RKPLNC19
RKPLNC25
RKPLNC27
RKPLNC23
RKPLNC29
RKPLNC39

KP06 plannig

Hi
I have entered cost center planning in KP06 in object currency, which is different from Co Area currency.
When I enter planning , it updates table COSP, with current exchange rate.
Now when exchange rate is changed, table entries in COSP are not amended with changed exchange rate.
This table is used in one of the SAP standard report, which then gives wrong figures with old exchange rate
Any idea about how to overcome this ?
Raj

yes, I am doing the planning. my issue is , planning figures are not updated with current exchange rate.
Is there any way, whereby we can revaluate planning as per current exchange rate
Raj

KP06 excel upload, KP66 report painter error.

Hello everyone,
I am attempting to upload our budget planning into KP06 via the excel flexible upload function.
I have created a new user profile via KP34.
I have created a new layout via KP65.
I have saved the "Generic File" and the excel file created when assigning the layout to the planner profile in KP34.
I enetered the needed information into the excel spreadsheet created above, and saved it as a .txt file.
When I go in to KP06 and attempt to upload the .txt file through KP06, I am getting the following Message:
"The row inserted cannot be processed manually"
When I select this message for mare detail, here is what I see:
The row inserted cannot be processed manually
Message no. K9 072
Diagnosis
You have entered a new row.
The characteristic entered in the lead column or the combinations of characteristics entered in the lead columns cannot be processed manually.
System Response
The entered row is not accepted.
Procedure
Analyze the cause of the error in the corresponding transaction.
I believe that has to do something with the file format or how I setup the layout in KP65. However, I can figure out what the issue is.
I am very new to using SAP Report writer/painter.
Does anyone have any suggestions in resolving this issue?
Thanks in advance for your help,
Rhonda

Hello,
Thank you for the replies. I did resolve the issue above (K9 072), the account group gave me a cost center and cost element that was blocked for use. Once I usees a valid cost center and cost element, the error went away.
We are using SAP version 4.6
With that said... I did receive another error, "Enter a numeric value"
Enter a numeric value
Message no. 00 052
The valid cost centers are alphanumeric, not just numeric. For instance: IT1 is a cost center.
Can alphanumeric values be used? If so, how to I go about making them work with the upload in KP06?
I have looked at the layout in report writer (KP66) and I see no options on allowing alphanumeric values. However, I am very new to this and just may be missing it.
Any suggestions would be greatly appreciated.
Thank you very much!
Rhonda

KP06 is not allowing to post monthly planning.

Hi ,
I have done configuration for KP06 to upload data from excel sheet.
Configuration done.
1) created planning profile in KP65.
copy 1-101 to Z1-101 and maintained monthly 1 to 12 period,
2) Assigned Profile in layout Kp34.
but planing data is not uploed monthly to all period.
it is uploading to period one only.
I trying to upload with excel sheet. Kp06.
Thanks in advance.
Ajay

Hi Ajay,
I'm facing the same issue, do you find any solution please?
Thank you
Houda

Wrong period values in Text template for upload of Plan data (KP06/KEPM)

Hi,
We are facing an issue in the upload template in text format for Upload of Cost Centre Planning data (Transaction KP06) in ECC 6.0.
We have some User defined layouts for Excel upload of plan data. If we save the file as a text (tab delimited) file, the Period values above the Column"Period" do not correspond to the correct periods in ECC 6.0. for e.g. the values above Period 1, Period 2, Period 3 are shown as 6, 5, 4 instead of the correct values 1,2,3. These values are considered by the system for uploading the Planning value in the appropriate Periods and hence the values entered in the Column Period 1 in the text file are incorrectly uploaded by the system in Period 6 based on the values generated by the system in the text file.
However, we do not encounter this issue in the 4.6C system where the values are correctly shown.
We are facing a similar issue with the text upload template for Sales Planning data in CO-PA (Transaction KEPM), where the values generated by the system do not correspond to the correct period.
Regards,
Rajaram

Hi Christian,
Thanks for the quick reply, i followed your earlier reply in the below thread and resolved the issue. Thanks.
How to delete CO plan data
Hi Ajay,
Thank you, We are uplaoding through KP06, Menu -->Extras --> Excel Planning --> Upload.
Regards,
Raj

KSII actual activity price issue

Hi All
I want system to calculate the activity price automatically after running KSII and should update it in KBK6 so that i can revaluate production order with actuals by running MFN1. Now i have done all the configuration required and my plan cost are getting updated after i run KSPI and same is getting update in KP26 and are also showing in KBK6 under plan cost nd can be seen in Cost center reports under plan cost. Problem is with actuals
I have been reading the forum regarding this issue and all the inputs given by experts is been checked but i think iam missing something either a step in calculating the actuals or may be some tick in configurations
Kindly let me know the solution for an issue iam facing .
Thanks in advance
Invin

Hi Surya
I had already done the setting in OKEW and all splitting structure configuration. Base on that my plan cost is been distrbuted in two different activities. Planning has been done in KP06 and after doing that only i ran the transaction KSPI.
But ya you got a point thats what iam feeling that there is some thing missing in my config settings which i already mentioned in my earlier posts.
What is the prb iam not able to recoganize kindly if you can give me some detailed information what could be the reason?
For your information i would like to tell briefly what i did so far:
1. IN configuration i defined splitting structure Say T1
2. then by selecting T1 i cllicked in assignment and assigned splitting rule say T10
3. then by selecting T10 i clicked on "Selection for assingment" in this screen i mentioned only one cost element say 55000000 in "from value" "to value" and in activity type i mentioned "from" 106010 "to" 106030
4. then i clicked back icon and selected "Splitting rules" which is T10 in my case and method i mentioned is "12- Activiy quanitity" and checkd the box called "Wt- Weighting Indicator"
5. then i selected my rule T10 and clicked on "Selection for rules" and here i mentioned my version that is 0
6. then i did config setting "Assign Splitting Structure to Cost Centers" over here i assined this rule to only one cost center say 31010401 in parameters i selected version radio box and entered 0 there
These all what i did in configuration settings
Now after this i did planning KP06 entered my cost center that is 31010401 and only mentioned my cost element which is 55000000 with my activity type 106010 and 106030 here i didn't took 106020 in consideration. Now these values are coming in my cost center plan report on debit side and then i ran KSPI cost got splitted in both the activiy types in credit side in planning section of cost center but the prb is the same which you know Actuals are not coming
Kindly put a light what could be the reason?
Thanks
Invin

KP06 mass planning through a single CSV file

Hi All,
I have created one Planning layout and assign it to a planner profile for KP06 upload. We are using CSV format file for this upload. Now i am able to upload Kp06 plan data for a single cost center for one period only.
But my client is asking for all cost centers plan for all periods through a single CSV file(mass planning). If its not possible for all periods plz guide me how to do for all cost centers for one period.
it would be appreciated if any one help on this issue.
Regards,
Spandana

Hi Nikolas
Still - Does Excel upload allows you to upload multiple cost centers at a time??
To upload by All periods in one go - One needs to define 12 Columns for the Key Figures.... But is multiple cost centers possible?? As far as I remember from SDN posts, its not possible
@ Spandana - I personally Luv LSMW for the same reason... You can upload all in one go and per sec it uploads avg 6 records in KP06... That speed is decent enuf
br, Ajay M

KP06 issue

Similar Messages

Maybe you are looking for