LaserJet 1102W lost connection to network after firmware update and can't reconnect.

I have used the LaserJet 1102W on my Wifii network for some time. I use MacOSX 10.7 on one laptop and OSX 10.8 on my new Retina Macbook Pro. I updated the firmware to get access to ePrint and lost wirless connections. I have tried many times to reestablish network connection as instructed thru System Preferences and continue to get the response that my Wep Key is invalid. I have many items using the Wep key including apple tv, phone, ipad and it is the correct wep key. My network is Wep 128. Is there some way I'm suppose to split the key between the 4 available wep key spaces? My router is a Linksys WRT320N, Mac Book Air running 10.7.4, Mac Book Pro running 10.8.2. I have been trying to setup the network wireless with the Mac Book Air. I can print with both computers via USB.

I updated a P1102w that we have here to firmware version 20120814 and haven't had any problems with it. I set a static IP and set the DNS to a preferred of 8.8.8.8 and an alternate of 8.8.4.4, and haven't had a problem with anything from a Windows system. I ran into a problem printing from Safari on a Mac running OS 10.8, but that was the only program with the problem. I even turned the printer off and back on several times to make sure the IP settings would stick, and they have. If you've done that and are still having problems, try power cycling your entire network. I'll link a document that will help to get the printer on the network steadily below. If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
Printer Does Not Maintain Wireless Connection:
http://goo.gl/YoJ7g
HP Technical Support Case Call Form:
http://goo.gl/w7Hgh
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

Helo, I asked your question to be moved... good luck!

Can't connect to internet after firmware update?

well last night i did a firmware update and now i can't connect to my network at home. i have a server running dhcp. so i gave the extreme a static ip in the range. dns and router ip are set to the servers ip. this all was working fine till last night. what am i doing wrong? i can't even log onto the server from my MBP. the APE is connected directly by ethernet to the server.
thanks

HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn

Can't connect to WRT54G after firmware update

I just tried to update the firmware on my WRT54G (version 8.0) and have not been able to connect to the router since then. The firmware said that it had been updated successfully, however I have been unable to connect since it reset itself, and the Ethernet and Internet LEDs are all constantly on even though nothing is connected (the power light on the other hand is behaving normally, not blinking or anything). I have tried resetting the router by holding down the reset button for 30 seconds, but this does not change anything, the router still cannot even be pinged. If anyone can give me any help at all with this, it will be very much appriciated. Thanks.

It sounds like the router might already be dead. But there is always hope that you might be able to revive it.
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

Can't connect to Airport after firmware update

Ever since I updated the firmware on my Airport I can't connect to it any more. I'm pretty sure I installed everything properly and reset the Airport several times but still no luck in connecting to it. Any suggestions?

DomPoggi wrote:The Airport Utility said firmware on each Airport Express needs to be updated, so I did it.
Dom
Firmware updates on the Express sometimes results in scrumbled settings.
Check that WiFi is disabled on your MacBook.
Then connect (preferabely with a LAN-Cable) the MacBook to the Express.
Open Airport Utility on the Mac and switch to the Express.
Use the wizzard to set up the Express from scratch or use manual setting zu check the settings.
Lupunus

Airport connection shuts off after a while and can't be turned on again

I have MacBook Pro alu-body (bought in March) and have the following strange problem. I got my MacBook back s few days ago from my Apple reseller who had to fix my laptop as the iSight camera wasn't working anymore. But sincethen, when I'm connected to the internet via my Airport, after a while (this can be 10 mins or so) suddenly the Airport switches of and can't be switched on again using the Network preferences utility. The very strange thing however is that I'm using a widget from a Classical Radio station to listen to the radio, that music (live streaming) is still okay, but at the same time I can't use my Airport as I can't switch it on again. So, I only can do then is to restart and the problem will occur after let's say 10 - 15 minutes or so.
I ran Apple hardware test and did some other test with Techtool Pro 5, but couldn't find anything wrong.
What can/should I do?
Thanks a lot in advance!

Thanks, but the problem is more complicated I guess. I just had the same problem, but now my MacBook Pro was completely frozen .... I couldn't do anything any more besides restarting.
After the restart, the Aiport doesn't come up again - ergo: the symbol on top of my MacBook is shows that the Aiport hasn't been installed: when I click on this symbol there is a text which says:'There is no Aiport card installed!'. So the system doesn't seem to find the Aiport card. When I use the 'Systemprofile' under the Apple and select Network > Aiport-card I can read 'no information has been found'.
I don't get it .... is this a hardware or a software problem?

Just did a Firmware Update and can't receive or send mail

I just did a firmware update as recommended by Apple:
2008-04-13 18:30:24 -0400: Installed "Aluminum Keyboard Firmware Update" (1.0)
2008-04-13 18:30:32 -0400: Installed "iMac EFI Firmware Update" (1.3)
I had restarted my iMac and noticed that my Mail 3.2 will no longer connect to my mail servers and send or receive mail.
My internet connection is fine when using my browser. I closed and restarted "Mail" and this didn't help and even restarted my computer but that didn't help either.
Anyone else that just did this update have a similar issue? Anyone know of a fix? I don't think I can undo the Firmware update now, so what do I do?
Thanks

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Delete and re-add the email accounts.

Airport Express doesn't connect to wireless network after firmware update

Hi,
I just updated the firmware on my Airport Express to 6.3 and now it will no longer join the network. I have tried reseting to the factory defaults and Airport Utility accepts all the information and shows the unit with a green dot next too it. However, the unit is still flashing amber and in the final step where the Utility tries to save the configuration the update fails and I get the following error message:
An error occurred while reading the configuration.
Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753).
I am using an old style AirPort Extreme as a base station.
Can anyone help?

Wow, really no suggestions yet? This is a first for me, on the Apple Discussion boards!
Can anyone help?

ESX 3.5u3 doesn't see network after firmware update on x6250

Hello,
We have got several Sun blade x6250 with ESX 3.5u3 with latest updates.
We have updated firmware on one of them from ELOM 4.0.45 -> ILOM 3.0.3.33 recently.
Now a ESX server doesn't see network:
Node ISOLATED form Network. Either repair network or override agent startup ...
I executed embedded PC-Check test, it saw all four NICs and said that they were 'Success'.
Also, I cleared statistic on a Cisco Catalist interfaces where the blade was connected.
After a day 'Receive' statistic is 0
Also, I tried to load the blade with DSL Linux, it didn't see network too.
Do you have any idea concerning the situation?
Thanks!
Regards,
Andrey.

Hello,
We have got several Sun blade x6250 with ESX 3.5u3 with latest updates.
We have updated firmware on one of them from ELOM 4.0.45 -> ILOM 3.0.3.33 recently.
Now a ESX server doesn't see network:
Node ISOLATED form Network. Either repair network or override agent startup ...
I executed embedded PC-Check test, it saw all four NICs and said that they were 'Success'.
Also, I cleared statistic on a Cisco Catalist interfaces where the blade was connected.
After a day 'Receive' statistic is 0
Also, I tried to load the blade with DSL Linux, it didn't see network too.
Do you have any idea concerning the situation?
Thanks!
Regards,
Andrey.

HP Laserjet m1214nfh MFP Doesn't work after firmware updating

Hello
HP Laserjet m1214nfh MFP (USB Connetcion).
I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing" and after some seconds LCD turns off and again prompts "Initializing".
Please guide me.
thank you

Hi,
Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
If the same persists please contact HP support by following Technical support after you buy for your region below:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

N97 cant connect to internet after firmware update

Let me start by saying that I've always been a loyal nokia supporter until the n97.
from the first day out of the box it has given me nothing but trouble!!! and i think that Nokia made a lot of mistakes with this "flagship phone"
But on to a more recent problem I've been having. i updated my firmware (via computer) to firmware v20.0.0.19 unfortunately I've completly lost the ability to go online through any form (3g /wifi) I've done everything i could think of (soft reset, hard reset) but nothing helps. I've read many threads who appear to have the same problem, only nobody has found a full prove solution (as far as i can see)
please prove me wrong. I'm at the point where it annoys me so much that i want to trow the phone out of a 5 story window

hi, sorry you're having problems, it may seem obvious but have you tried deleting all your internet access points, and then adding new access point ? May help, also I'm sure I saw another post with a similar issue also on 3, maybe worth contacting them as they are renound for tightly controling there branded phones and may be able to send you some new settings.
Hope you get it sorted it's a great phone once it's running right, and mine is on V2.1.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Lost connection to XE after adjusting SGA and PGA

I lowered SGA from 170M to 50M, and PGA from 60M to 10M. Now I can not connect to XE using apex. Toad also reports ora-12514. I rebooted the pc and also manually cycled the db. But nothing works. In Service the oracle servies appear to be fine.
Thanks for any help.
Sorry for posting XE question here. I can't access the XE forum.
xmk

I reboot it again and this time I can get in sqlplus by using
sqlplus "/ as sysdba"
The following is the bottom part of aler_xe.log, a bit long.
^^^^^^^^^^^^^^^^^^^^
Instance terminated by USER, pid = 2432
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Thu Oct 12 13:29:15 2006
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:698M/1014M, Ph+PgF:2232M/2440M, VA:1944M/2047M
Thu Oct 12 13:29:15 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Oct 12 13:29:26 2006
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 16777216
__large_pool_size = 0
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 54525952
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 29360128
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 10485760
PSP0 started with pid=3, OS id=2316
PMON started with pid=2, OS id=2312
MMAN started with pid=4, OS id=2320
DBW0 started with pid=5, OS id=2492
LGWR started with pid=6, OS id=2496
CKPT started with pid=7, OS id=2508
SMON started with pid=8, OS id=2472
RECO started with pid=9, OS id=2476
CJQ0 started with pid=10, OS id=2516
MMON started with pid=11, OS id=2524
Thu Oct 12 13:29:28 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=1704
Thu Oct 12 13:29:28 2006
starting up 4 shared server(s) ...
USER: terminating instance due to error 12853
Thu Oct 12 13:29:34 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_pmon_2312.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Thu Oct 12 13:29:34 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dbw0_2492.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Thu Oct 12 13:29:34 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mman_2320.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Thu Oct 12 13:29:34 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_2496.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Thu Oct 12 13:29:34 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_reco_2476.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Thu Oct 12 13:29:34 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_2472.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Thu Oct 12 13:29:34 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_ckpt_2508.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Thu Oct 12 13:29:35 2006
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_psp0_2316.trc:
ORA-12853: insufficient memory for PX buffers: current K, max needed K
Instance terminated by USER, pid = 1544

Installed firmware update, and can no longer connect to AE base station

I have an Airport Express base station and would like to connect to an existing wireless network.
I first attempted to change the AE base station to "client mode" in Admin Utility, but this option was grayed out.
I downloaded and successfully installed the latest version of the firmware, and I also did a factory restart. Now, Admin Utility recognizes the base station, but when I click "configure" and enter my password at the prompt, I get the following message:
"An error occurred while trying to access the base station. Make sure your network connection Is valid and try again. Error code -4"
Any suggestions would be greatly appreciated!

Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck!

HT4623 My iPad is not connecting to internet after software update what can i do

Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? Please

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

WRT310N Setup issues after firmware update and factory reset

Hi Everyone,
I recently updated my firmware to v2 on my WRT310N and found that I could no longer connect my PC to my router. Whenever I run the setup software that came with the router it goes through all the steps but errors out when it looks for the router. I think the error number I am getting is 322.
I tried to reset the router to the factory defaults, but I am still having the same issues.
When I plug my Cable modem directly into my PC I have no issues and have full internet connectivity. I have tried to navigate manually to the 192.168.1.1 to do a manual setup of the router but I can't get to the router main page.
I'm running windows XP SP3 and I had no issues up until I did the firmware upgrade. I can't think of what I am doing wrong and am stuck.
Any thoughts?

Make sure that the cable modem is connected to the Internet port of the router. Your computer should be connected to one of the 4 Ethernet ports on the router. If your computer is connected to the port 1 of the router then port 1 light on the router will lit up. Also make sure that the Power light on the router is steady and not flashing. If the power light on the router is flashing then try to reset and power cycle the router again.
Once the power light on the router is steady then check the IP address of the computer.
Go to Start >> Click Run >> Type cmd and click Ok. You will get the command prompt window opened. In the command prompt type ipconfig and hit Enter on your keyboard. You will see the IP address of your computer. The IP address of the computer will be like 192.168.1.xxx and Default gateway will be 192.168.1.1.
Now open the Internet browser and in the address bar type the number 192.168.1.1.
It will ask you to enter the User name and password for the router. Leave the user name blank and in the password type admin. It will open the Linksys router setup page.
Under the setup tab you will find Mac address Clone sub-tab. Enable the MAC addres clone and click on the button Clone my PC's MAC. Save the changes. Try to access the Internet on your main computer.
If not able to access the Internet then unplug the power cable to the router and modem. Plug in the power to the modem first. Wait for a minute and then plug in the power to the router. Try to access the Internet.
Once your main computer is able to go on line then you can change the wireless settings of the router.

LaserJet 1102W lost connection to network after firmware update and can't reconnect.

Similar Messages

Maybe you are looking for