LMS 3.2 SP1 RME showing no records in syslog report while shows same report in device center

Hi All,
I have LMS 3.2 SP1 installed on windows 2003 server with 2 GB of RAM, its doubled swap space and with 230 GB of partition assigned to it.
when i am generating Syslog 24 hour report in RdME , it does not show any data. I have checked with syslog.log file which is perfect. Even, i have recreated this file. I have checked with syslog collector and analyzer which is also fine. I have also restored the database to factory default by RestoredbOrig.pl script, but no result.
I can see the same syslog standard report in Device center in Device Diagnostic tool by selecting the device and clicking on syslog standard report.
Can somebody help me in this matter, as this is long pending issue?
Regards,
Chander

Hi Chander,
Share  the screen shot to Syslog Collector status.
Thanks-
Afroz

Similar Messages

  • LMS 3.2 SP1 RME showing no records in syslog report while same report in device center shows

    Hi All,
    I have LMS 3.2  SP1 running on windows machine, when i am generating 24 hours report(Standard) in RME i do not see any records, while in Device center  in Device Diagnostic center, i can see the same report showing the logs.  i have checked the sylog.log file, i can see the logs in it. I have restored the original database by Restoredborig.pl, the RME database also but no result.
    I would appreciate quick reply in this matter as i am facing this issue since long time and tried all possible things.
    Regards,
    Chander

    Hi Chander,
    Share  the screen shot to Syslog Collector status.
    Thanks-
    Afroz

  • LMS 3.2 SP1 RME showing no records in syslog report

    Hi All,
    I have LMS 3.2 SP1 installed on windows 2003 server with 2 GB of RAM, its doubled swap space and with 230 GB of partition assigned to it.
    when i am generating Syslog 24 hour report in RdME , it does not show any data. I have checked with syslog.log file which is perfect. Even, i have recreated this file. I have checked with syslog collector and analyzer which is also fine. I have also restored the database to factory default by RestoredbOrig.pl script, but no result.
    I can see the same syslog standard report in Device center in Device Diagnostic tool by selecting the device and clicking on syslog standard report.
    Can somebody help me in this matter, as this is long pending issue?
    Regards,
    Chander

    Hi Chander,
    Share  the screen shot to Syslog Collector status.
    Thanks-
    Afroz

  • Data source using Fn.Mod. in R/3 shows 53 records but in BW side show error

    Hello gurus,
    I have created a data source in R/3 , when tested showed 53 records, but in BW side when i did extraction it failed, & put me an error message saying
    " error occured in source system"
    Points will be awarded for any kind of response.
    Thanks and regards,
    Anurupa.

    Hi,
    Try what is given above.
    Also check SM37 job log (In source system if load is from R/3) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' or cpicerror for any datapacket in SM37.
    SM21 - System log can also be helpful.
    If you are 3.5 try this also
    1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
    2) Run the load only to PSA.
    3) Once the load is succesfull , then push the data to targets.
    In this way you should be able to overcome this issue.
    Hope this helps.
    Thanks,
    JituK

  • Display multiple records as sub-sections in the same report.

    I am using Crystal Reports (VS-2005).
    In a report, I have various sub-sections in the Details section. Each section represents a category and is connected with SQL command which uses LEFT OUTER JOIN.
    The first section is the main section and the subsequent sections are the child sections.
    Sometimes, a sub-section (other than the first main sub-section) picks multiple records of that category. In this case the report extends to multiple pages. Each report displays one record of this sub-section.
    I want to show the the same sub-section multiple times in the same report as opposed to multiple reports that are now automatically generated by Crystal Reports.
    How to handle this issue?

    This is a .NET programming forum related to Crystal Reports. Your question is best suited for our report design forum below. Also, when you post your question it will be helpful if you use report design terminology. We have elements like Report Header, Page Header, Groups, and Details sections. Just mentioning "sections" doesn't give us a good idea about what you are attempting to do.
    Check out the grouping options and see if it helps. You might need to create a formula to help you with your grouping though.
    If you like, I can move this to the design forum.
    [SAP Crystal Reports Design|SAP Crystal Reports;

  • How to show 'No Records Found' and 'Employee Name Unknown' in oracle report

    Hello,
    I'm using 6i and building a report to show employees who have incorrectly input their time. I have an input parameter so a user can select a specific employee by emp_id or can leave it empty to show all. That part works. I also have date parameters that are required. That works too. However I am having trouble displaying 'NO Records Found' if the date parameters have no late or rejected employee time records. I currently have it as a text field arranged behind the emp_name field which i filled white. It works...however i have a pretty good feeling there is a better way to do this. Also, I have some data that is null since i am using two tables. There are time stamps with no emp_name or emp_number. I still need to show these records but want them to show up as "Employee Name Unknown" that way the user doesnt get confused and thinks the emp_name in the row above also includes this row.
    select e.location "Clock Location",
    e.emp_no "Emp No",
    l.first_name ||' ' || last_name "Name",
    e.time_stamp "Time",
    from emp_time e, master_all l
    where e.emp_no (+) = l.emp_no
    and e.status = 'rejected'
    --and e.emp_no  = nvl (:p_emp_no, emp_no)
    --and e.time_stamp between :p_start_date and :p_end_date                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hi,
    So, when the join between emp_time and master_all produces no rows, you still want one row of output, saying 'No Records Found'; is that right?
    If so, you can outer-join the result set to dual, with some join condition that accepts anything.
    Use CASE (or equivalents) to get special values (like 'No Record Found' or 'Employee name unknown') when certain columns are NULL.
    For example:
    SELECT     j.location     AS "Clock Location"
    ,     j.emp_no     AS "Emp No"
    ,     CASE
              WHEN  j.name     IS NULL
              THEN  'No Records Found'
              ELSE  j.name
         END          AS "Name"
    ,     time_stamp     AS "Time"
    FROM     dual     d
    ,     (     -- Begin in-line view j, join of emp_time and master_all
              SELECT     e.location
              ,     e.emp_no
              ,     CASE
                       WHEN  l.first_name IS NULL
                       AND       last_name    IS NULL
                       THEN  'Employee name unknown'
                       ELSE  l.first_name || ' ' || last_name
                   END     AS name
              FROM      emp_time     e
              ,     master_all     l
              WHERE     e.emp_no (+)       = l.emp_no
              AND      e.status (+)       = 'rejected'
    --           AND     e.emp_no (+)        = NVL (:p_emp_no, emp_no)
    --           AND       e.time_stamp (+)  BETWEEN :p_start_date
                                             AND        :p_end_date
         ) j     -- End in-line view j, join of emp_time and master_all
    WHERE     d.dummy     != j.name (+)
    ;In an outer join, all conditions involiving the optional table need a + sign; otherwise, the effect is the same as an inner join.
    The message 'No Records Found' is a string, so it has to go in a string column.
    I put it in the "Name" column, just because I knew that "Name" was a string.
    You can put in in any other column if you wish. If that column is not already a string, then use TO_CHAR to make it a string.
    You could also have a column just for this message.
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data.
    DOUBLE U wrote:
    I've tried nvl in the select statement but since emp_name is a concatination of first and last name it doesnt work. This is what i have tried
    nvl(l.first_name|' '||l.last_name,'NO EMPLOYEE RECORD FOUND') "Employee",I assume you meant to have two | characters, not just one, after first_name.
    The first argument to NVL will never be NULL in that case; it will always contain at least a space, whether or not the other columns are NULL. You could say:
    NVL ( NULLIF ( l.first_name || ' ' || l.last_name
        , 'NO EMPLOYEE RECORD FOUND'
        )        "Employee",bujt I find it less confusing to use CASE, as shown above.

  • ALV GRID Report is not showing all records which is in internal table

    hi all,
    have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input.   Example:   it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
    temporarily i have given excel output file from it_main table. excel file is showing all records.
    here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
    please give me some idea.
    FORM display_alv_report.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_buffer_active          = 'X'
          i_callback_program       = sy-repid
          is_layout                = wa_layout
          it_fieldcat              = it_fcat
          it_events                = it_events
          i_save                   = 'A'
          is_variant               = wa_variant
        TABLES
          t_outtab                 = it_main
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE text-204 " 'Error in Display the list'
        TYPE 'I'.
        LEAVE TO LIST-PROCESSING.
      ENDIF.
    ENDFORM.            .                    "DISPLAY_ALV_REPORT
    Best Regards,
    Srinivas

    hi
    Please study this program and give me suggestions.
    ALV Declaration
    DATA : it_events TYPE slis_t_event,               "ALV event
               it_fcat   TYPE slis_t_fieldcat_alv,        "Field catalog
               it_list_top_of_page TYPE slis_t_listheader,
               c_tabname  TYPE slis_tabname   VALUE 'IT_MAIN'.
    DATA : wa_layout  TYPE slis_layout_alv,
                wa_event   TYPE slis_alv_event,
               wa_fcat    TYPE slis_fieldcat_alv,
               wa_variant TYPE disvariant.
    START-OF-SELECTION.
      PERFORM material_pass.
      PERFORM data_retrieval.
    END-OF-SELECTION.
      PERFORM sub_display_report.
    FORM sub_display_report .
      DATA status(1).
      IF r1 = 'X'.
        PERFORM build_fieldcatalog USING :
          '1'  'ERDAT'     'S.O DATE'             '' '10'  'X',
          '2'  'VBELN'     'SALE ORDER'           '' '10'  'X',
          '3'  'POSNR'     'SALE ITEM'            '' '6'   '',
          '4'  'BSTKD'     'CUSTOMER PO'          '' '35'  '',
          '5'  'BEZEI'     'REASON FOR REJECTION' '' '40'  '',
          '6'  'PLNUM'     'PLANNED ORDER'        '' '10'  '',
          '7'  'AUFNR'     'PROD.ORDER.'          '' '12'  '',
          '8'  'MATNR'     'MATERIAL NUMBER'      '' '18'  '',
          '9'  'MAKTX'     'MATERIAL DESCRIPTION' '' '40'  '',
          '10' 'WERKS'     'PLANT'                '' '4'   '',
          '11' 'KWMENG'    'SALE ORDER QTY'       '' '15'  '',
          '12' 'VRKME'     'UNIT'                 '' '4'   '',
          '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13'  '',
          '14' 'IGMNG'     'CONFIRMED ORDER QTY'  '' '13'  '',
          '15' 'GMEIN'     'UNIT'                 '' '4'   '',
          '16' 'MENGE'     'G.R QUANTITY'         '' '13'  '',
          '17' 'SOBAL'     'S.O BALANCE'          '' '13'  '',
          '18' 'PRDBAL'    'PROD.BALANCE'         '' '13'  '',
          '19' 'GSM'       'GSM'                  '' '4'   '',
          '20' 'SIZE1'     'SIZE1'                '' '10'  '',
          '21' 'SIZE2'     'SIZE2'                '' '10'  ''.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            filename              = pathname
            filetype              = ftype
            append                = 'X'
            write_field_separator = 'X'
          TABLES
            data_tab              = it_mains
          EXCEPTIONS
            file_write_error      = 1.
        IF sy-subrc = 0.
          status = 'S'.
        ELSE.
          status = 'E'.
        ENDIF.
      ELSEIF r2 = 'X' OR r3 = 'X'.
        PERFORM build_fieldcatalog USING :
          '1'  'ERDAT'     'S.O DATE'             '' '10'  'X',
          '2'  'VBELN'     'SALE ORDER'           '' '10'  'X',
          '3'  'POSNR'     'SALE ITEM'            '' '6'   '',
          '4'  'BSTKD'     'CUSTOMER PO'          '' '35'  '',
          '5'  'BEZEI'     'REASON FOR REJECTION' '' '40'  '',
          '6'  'PLNUM'     'PLANNED ORDER'        '' '10'  '',
          '7'  'AUFNR'     'PROD.ORDER.'          '' '12'  '',
          '8'  'MATNR'     'MATERIAL NUMBER'      '' '18'  '',
          '9'  'MAKTX'     'MATERIAL DESCRIPTION' '' '40'  '',
          '10' 'WERKS'     'PLANT'                '' '4'   '',
          '11' 'KWMENG'    'SALE ORDER QTY'       '' '15'  '',
          '12' 'VRKME'     'UNIT'                 '' '4'   '',
          '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13'  '',
          '14' 'IGMNG'     'CONFIRMED ORDER QTY'  '' '13'  '',
          '15' 'GMEIN'     'UNIT'                 '' '4'   '',
          '16' 'MENGE'     'G.R QUANTITY'         '' '13'  '',
          '17' 'SOBAL'     'S.O BALANCE'          '' '13'  '',
          '18' 'PRDBAL'    'PROD.BALANCE'         '' '13'  '',
          '19' 'GSM'       'GSM'                  '' '4'   '',
          '20' 'SIZE1'     'SIZE1'                '' '10'  '',
          '21' 'CUT1'      'CUT1'                 '' '11'  '',
          '22' 'SIZE2'     'SIZE2'                '' '10'  '',
          '23' 'CUT2'      'CUT2'                 '' '11'  '',
          '24' 'SIZE3'     'SIZE3'                '' '10'  '',
          '25' 'CUT3'      'CUT3'                 '' '11'  '',
          '26' 'SIZE4'     'SIZE4'                '' '10'  '',
          '27' 'CUT4'      'CUT4'                 '' '11'  '',
          '28' 'SIZE5'     'SIZE5'                '' '10'  '',
          '29' 'CUT5'      'CUT5'                 '' '11'  '',
          '30' 'SIZE6'     'SIZE6'                '' '10'  '',
          '31' 'CUT6'      'CUT6'                 '' '11'  ''.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            filename              = pathname
            filetype              = ftype
            append                = 'X'
            write_field_separator = 'X'
          TABLES
            data_tab              = it_mainall
          EXCEPTIONS
            file_write_error      = 1.
        IF sy-subrc = 0.
          status = 'S'.
        ELSE.
          status = 'E'.
        ENDIF.
      ENDIF.
      PERFORM build_layout.
      PERFORM build_events.
      PERFORM sub_comment_build USING it_list_top_of_page.
      PERFORM sub_set_variant.
      PERFORM display_alv_report.
      IF status = 'S'.
        MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
      ELSE.
        MESSAGE 'Download Not Possible' TYPE 'I'.
      ENDIF.
    ENDFORM.                    " SUB_DISPLAY_REPORT
    FORM BUILD_FIELDCATALOG
    FORM build_fieldcatalog USING  p_col_pos
                                   p_fieldname
                                   p_text
                                   p_datatype
                                   p_outputlen
                                   p_col_freez.
      wa_fcat-row_pos        = '1'.
      wa_fcat-col_pos        = p_col_pos.
      wa_fcat-fieldname      = p_fieldname.
      wa_fcat-tabname        = c_tabname.
      wa_fcat-reptext_ddic   = p_text.
      wa_fcat-datatype       = p_datatype.
      wa_fcat-ddic_outputlen = p_outputlen.
      wa_fcat-key            = p_col_freez.
      APPEND wa_fcat TO it_fcat.
      CLEAR wa_fcat.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
    FORM build_layout.
      CLEAR: wa_layout.
      wa_layout-window_titlebar   = 'LIST OF GSM WISE OPEN SALE ORDERS'.
      wa_layout-colwidth_optimize = 'X'.
      wa_layout-totals_text       = 'CUMULATIVE'.
    ENDFORM.                    "BUILD_LAYOUT
    *&      Form  BUILD_EVENTS
    FORM build_events.
      CLEAR wa_event.
      REFRESH it_events.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 0
        IMPORTING
          et_events       = it_events
        EXCEPTIONS
          list_type_wrong = 1
          OTHERS          = 2.
      IF sy-subrc = 0.
        READ TABLE it_events INTO wa_event
             WITH KEY name = 'TOP_OF_PAGE'.
        IF sy-subrc EQ 0.
          wa_event-form = 'TOP_OF_PAGE'.
          APPEND wa_event TO it_events.
          CLEAR wa_event.
        ENDIF.
      ENDIF.
    ENDFORM.                    "BUILD_EVENTS
         -->P_IT_LIST_TOP_OF_PAGE  text
    FORM sub_comment_build  USING it_top_of_page TYPE slis_t_listheader.
      DATA ls_line TYPE slis_listheader.
      CLEAR ls_line.
      ls_line-typ = 'H'.
      ls_line-info = str1.
      APPEND ls_line TO it_top_of_page.
      CLEAR ls_line.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
         it_list_commentary = t_header[].
    ENDFORM.                    " SUB_COMMENT_BUILD
    *&      Form  SUB_SET_VARIANT
          text
    -->  p1        text
    <--  p2        text
    FORM sub_set_variant .
      CLEAR wa_variant.
      wa_variant-report = sy-repid.
      wa_variant-username = sy-uname.
    wa_variant-variant = c_variant.
    wa_variant-variant = p_layout.
    ENDFORM.                    " SUB_SET_VARIANT
    *&      Form  DISPLAY_ALV_REPORT
    *Display Report Using ALV GRID
    FORM display_alv_report.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_buffer_active          = 'X'
          i_callback_program       = sy-repid
         i_callback_pf_status_set = c_pf_status
         i_callback_user_command  = c_user_command
          is_layout                = wa_layout
          it_fieldcat              = it_fcat
         it_sort                  = it_sort[]
          it_events                = it_events
          i_save                   = 'A'
          is_variant               = wa_variant
        TABLES
          t_outtab                 = it_main
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE text-204 " 'Error in Display the list'
        TYPE 'I'.
        LEAVE TO LIST-PROCESSING.
      ENDIF.
    ENDFORM.            .                    "DISPLAY_ALV_REPORT
    *ALV Report Header
    FORM top_of_page.
      DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
             wa_header TYPE slis_listheader,
             t_line LIKE wa_header-info,
             ld_lines TYPE i,
             ld_linesc(10) TYPE c.
      wa_header-typ  = 'H'.
    T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
      wa_header-info = str1.
      APPEND wa_header TO t_header.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = t_header[].
    ENDFORM.                    "TOP_OF_PAGE
    here it_main internal table having all data. but output is showing few records only.
    pl. give some idea.
    Thanks & Regards
    Srinivas.

  • Freight Carrier Form not showing all records

    The Freight Carrier form is not showing all of the data that shows in the table
    (ORG_FREIGHT). For the Organization that I am in (#23) the table shows 108 records but the form only shows
    35 records. Why? How can I make the form see all of the records in the tables? I am in the middle of converting 11.0.3 to
    11i.
    Thanks
    Shelby

    What version of Visual Studio and the Crystal for Visual Studio SDK are you using?
    -Dell

  • Crystal Report not showing fields when connected to a stored procedure

    I have a Stored Procedure that returns results when run in SQL Server, but when I add this to a Crystal Report it doesn't show any fields in the Field Explorer. But if I try any other SP, it works fine and I can see its fields.
    As you can see in the picture below, I am unable to expand the fields in the report while creating the report using standard report procedure too.
    I tried different ways, but nothing worked for me here. Please help me here.
    (FYI, I am using Crystal Reports 2008, SQL Server 2008R2)

    Hi Jamie,
    I just found out the reason for this issue.
    I wrote the stored procedure using the fields in the Datamart but the fields in the datamart in backend are connected to a different database which doesn't have SQL Server Authentication (for the Credentials) and that's the reason I was getting this issue.
    Once my BI team granted the permission, for that fields connecting to the backend database, I was able to see all fields in the Crystal Report.

  • Device Center in RME 4.3.1

    Hi
    Aftetr upgrade RME from 4.3.0 to 4.3.1 some posibilities in Device Center has disappeared . I have  got only Create Collector in Managment Tasks tab. I can't see when has inventory and archive config  been polling.
    Screen is in attachment.

    this is CSCtc21648. You need to contact TAC to get the patch.
    CSCtc21648            Bug Details
    RME links and info missing from Device Center after upgrade
    Symptom:
    The Resource Manager Essentials tasks and  reports are missing from the Device Center.  Additionally, all  RME-related device information is also omitted.
    Conditions:
    This occurs after applying the RME 4.3.1 EnergyWise service pack.
    Workaround:
    A workaround is available by contacting the TAC

  • How to pass record Group from Forms with DATA_PARAMETER to Reports Server

    How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
    When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
    We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
    How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
    Thanks,
    Arif

    Hi Mandeep,
    Could you please tell me how can i pass data parameter from forms to report through run_product.

  • LMS 4.1 shows "No records" for all devices

    Hello everyone,
    One of our end clients noticed that there is a "No records" message when choosing to show syslog messages for all devices that are configured on his LMS.
    Under "LMS - Admin > System > Server Monitoring > Processes" I can see that the "SyslogAnalyzer" and "SyslogCollector" are showing as "Running normally"
    Also see attached screenshot:
    I would really appreciate your advise on this issue.

    hello Daniel,
    you are getting syslogs but they are getting filtered .
    go to >>
    Admin > Network > Notification and Action Settings > Syslog Message Filters
    and change the filter settings . Try >> KEEP and Enabled combination. after changing settings check the syslogs collector status , Keep an Eye on the Forwarded column, you should see counts in it instead of  zero .
    you might need to play with filter settings   to get this worked. 
    This is how Filters works:
    Scenario 1:
    All filters are disabled. Mode:Keep             (Like in Our case with
    Disabled the LINKUPDOWN and  Mode is Keep  .so all the messages for that
    LINKUP DOWN will be only Forward)
    All messages will be forwarded.
    Scenario 2:
    All filters are disabled. Mode:Drop
    All messages will be filtered.
    Scenario 3:
    Atleast one filter is enabled. Mode:Keep
    Only those syslog messages that satisfy the enabled filters will be
    forwarded and all others will be filtered.
    Scenario 4:
    Atleast one filter is enabled. Mode:Drop
    Only those syslog messages that satisfy the enabled filters will be filtered
    and all others will be forwarded
    Thanks-
    Afroz
    [Do rate the useful post]

  • Ciscoworks LMS 3.0.1 RME devices management

    Hello everyone,
    I work with CW LMS 3.0.1 with the following product versions installed:
    Products Installed
    Showing 1-8 of 8 records
    Product Name
    Version With Patch Level
    Installed Date
    1.
    CiscoWorks Common Services
    3.1.1
    02 Mar 2010, 10:34:04 CET
    2.
    Campus Manager
    5.0.2
    02 Mar 2010, 10:34:05 CET
    3.
    CiscoView
    6.1.7
    02 Mar 2010, 10:34:10 CET
    4.
    CiscoWorks Assistant
    1.0.1
    02 Mar 2010, 10:34:10 CET
    5.
    Device Fault Manager
    3.0.5
    02 Mar 2010, 14:55:12 CET
    6.
    Internetwork Performance Monitor
    4.0.1
    02 Mar 2010, 10:34:14 CET
    7.
    LMS Portal
    1.0.1
    02 Mar 2010, 10:34:17 CET
    8.
    Resource Manager Essentials
    4.1.1
    02 Mar 2010, 10:34:18 CET
    Many Thanks in advance,
    LucaI verified that RME has a license to support 1500 devices while the devices discovered by RME are about 1600.
    Many of these devices have now been eliminated from the Network (around 200) and I want to know if there is a way to automatically remove them from CW or if I must remove them manually step by step.

    In LMS 3.0.1, you must remove them manually.  LMS 3.2 has a feature which can poll devices in DCR, then generate a report for those which are no longer reachable.  That will then facilitate removing those devices.

  • Problem: LMS 3.2 SP1 do not connect to CCO for software and device updates

    LMS 3.2.1
    When I try to check Software and Device packages updates for LMS components, it fails with "Error while downloading package information from Cisco.com for the selected products. See the d:/CSCOpx/log/psu.log file for details." diagnostics.
    CSCOpx\log\psu.log shows that it fails with 404 error. Looking to wireshark capture, I see that software make GET to http://www.cisco.com, then GET to http://cco.cisco.com/cgi-bin/login, then GET to www.cisco.com/cgi-bin/WLAN/cwselectfile.cgi with some params, which result in "404 Not Found" error nevermind which product (Common Services, Campus Manager, RME, DFM or others) I try to get updates on.
    Is there any patch or solution for it?

    have you installed the patch for bug ID CSCto46927, yet?
    the details form the Bug Tool Kit:
    ============================
    Psu support changes from CCO to SPRIT
    Symptom:
    After the 16th of June 2011 LMS will no longer be able to download Software and Device Package updates, or PSIRT and End of Sale/Life information from CCO
    Conditions:
    Hosted services in Cisco.com that are being leveraged by LMS, for downloading the latest Software and Device Package updates, as well as the PSIRT and End of Sale/Life information are being migrated to a new framework and the old services will be retired.
    This will affect all LMS 3.x and 4.x versions.
    Refer to https://supportforums.cisco.com/docs/DOC-16806 for more information
    Workaround:
    Users of LMS 3.2.1 , 4.0 should install the patch that can be downloaded from cisco.com
    Users of earlier version will need to upgrade to LMS 3.2 and then install the LMS 3.2 SP1 patch set before installing the patch   
    =================================
    the patch cwcs33x-win-CSCto46927-1.zip can be downloaded here

  • LMS 3.2 with RME 4.3.1 not Archiving configuration

    HI ,
    I am facing problem in Ciscoworks in Fetching config Archieve from Cisco ASA-5510 Adaptive Security Appliance . I am using LMS 3.2 and RME 4.3.1
    SSH is enable in the device, and from LMS server I am able to connect through Putty. Also from Management station to Device it showing SSH is up for both version. But from RME its failing Its giving below mentioned error
      Device: COGINHYDGCBDFHRTF1       Status:   Failed
    *** Device Details for COGINHYDGCBDFHRTF1 ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> SSH,Telnet,TFTP,RCP,SCP,HTTPS
    Execution Result:
    RUNNING
    CM0151 PRIMARY RUNNING Config fetch failed for COGINHYDGCBDFHRTF1 Cause: Couldnot enter ENABLE Mode from USER Mode on 10.241.44.220.TELNET: Failed to establish TELNET connection to 10.241.44.220 - Cause: Connection refused.
    Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
    I have tried from LMS server by telneting to port 22, its giving below output------SSH-1.99-Cisco-1.25
    When I have tried to test device credentials for SSH and SSH Enable mode, then below output I am getting. SSH remains blank status.
    Device Name
    SSH
    Enable
    by SSH
    1.
    COGINHYDGCBDFHRTF1
    Did Not Try
    Pls help to resolve this.

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    ],DEBUG,[Thread-778],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,debug,31,Returning from Session.send('terminal width 0
    [ Thu Oct 28  15:02:28 GMT+05:30 2010 ],DEBUG,[Thread-778],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,debug,31,in trimPrompt(), prompt == 'ASA-F1# '
    [ Thu Oct 28  15:02:28 GMT+05:30 2010 ],DEBUG,[Thread-778],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,printStackTrace,51,stacktracecom.cisco.nm.lib.cmdsvc.CmdSvcException: Unhandled SSHv2 message: SSH_MSG_CHANNEL_REQUEST(98)
                    Channel ID: UInt32[ 0 ]
                    Channel Request Type: exit-status
                    Want Reply: true
                    Timeout (msec): 0
                    Exit Status: UInt32[ 0 ]
    What i deduce from this output is may be "ter width 0" is un-authorised for the user or is not supported by the particular code that you are currently running in the box.
    Best Regards // Rajiv

Maybe you are looking for