LSMW for Work center text

Hi Experts,
Im developing LSMW to upload the Work center text(TCode CA10).
I did tried on Direct input -> program /SAPDMC/SAP_LSMW_IMPORT_TEXTS in LSMW. The uploading process was done successfully but it can not be used in Master Recipe assignment(TCode C202). Reason due to the direct input program doesn't has Work center short text. FYI, the Work center short text is entered during the Work center text creation via CA10 first screen.
And i did tried on CA10 manually, work center text only can be used in TCode C202 when it is created with short text key in at CA10 first screen. While for the Work center text that created without short text key in, system will prompt error when i try to assign the Work center text into C202.
Thus, i may need you advice. In LSMW other that direct input,is there any BAPI or IDOC available for the Work center text upload?
Please comment.
Thanks in advance.

Hi SKK,
Thanks for you reply.
I did tried on FM SUBMISSION_PROCESSING, and found:
It is being trigger online, whereby i need to key in the text manually.
Since my requirement is mass upload, hence that is impossible for me to execute the FM to key in the text manually.
Do you know there is any other FM/BAPI/IDOC that can perform the Work center Short and Long text in background mode?
Please comment.

Similar Messages

ALE/iDoc for Work Center data transfer

Hello, community.
I am working on several interfaces for the PP and PM modules using iDocs/ALE.
One of the requirements is that only created and modified data must be distributed from R/3.
For Work Centers, we are using basic type LOIWCS02 and message type LOIWCS. We are generating iDocs through transaction POIM, which has two transfer modes: Complete (data for all Work Centers etc.) and Change (only new and updated data).
The Change Transfer Mode assumes you have set both Change Pointers and Change Documents for the objects to be transfered. Otherwise, it'll work just like the Complete Transfer Mode.
Our PP consultant told me there is no configuration to generate Change Documents for Work Center data modifications.
Can anybody give me other opinions? I'll resort to Z-table solutions only if I have no other options.

Hi Danilo,
Do you know what the process codes are for
LOIWCS and LOIROU ?
Appreciate your help.
Thanks,
Gopi.

User Exit or DB-Table for Work Center (CR01)

Hi!
I have an external software which must be triggered when the user changes a work center in SAP (transaction CR01,CR02). I was looking for an user exit to do what ever is necessary but I couldn't find one.
So, does anybody know an user exit or BADI for work center?
Also possible:
The database table where work center are stored. So I could poll against this table and check if a work center was changed. I found the table SGOSHIST which log all modified objects in SAP. So this could maybe used to check for modified work center, I think.
Thanks,
Konrad

> You can check the BADI definition from transaction SE18,
> 'LTRM_WORK_CNTR_DTRM', this might be helpful,
How can I check this BADI. If I use SE18, it doas not exist, buit if I try to create it, the system tells me that it already exists in the SAP Original System... and asks me if I want to create a copy of it! I don't know what to do at this point!
> Work center details are avilable in CRHD table, you can
> look for CR* from SE11 transaction,
I know, but if you change the description of the work center, it is stored in CRTX. there are a lot of CR* tables. It would be helpful to have a table which is updated every time a work center is modified!
Thanks,
Konrad

Tables for routing (for work center)

hi friends,
I am doing report on routing but i did not get value for work center i got tables CRHD CRCA CRCO CRHH CRHS CRTX KAKO KAZY .
i try to get result by using link with PLPO and PLKO.
in TCode CA03 when i see the technical attributes it stors the dat ain structure PLPOD but i am unable to use it.
kindly can anybody tell me how to work center.
thanks & regards
Bhupinder Singh Kaler

Hi Bhupi kaler,
try to link CRHD and PLKO with WERKS ( Plant ) field ane get the ARBPL ( Work center ).
Best regards,
raam

Change log for work center data

Hi,
I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
Can anyone tell me as to why this is happening.
What I think is that some changes to the configuration are required in order to log the changes in the database.
Kindly help.
Regards
Varun

Hi Wolfgang,
Thanks for the information.
However i have another question.
The change table will have data only when it is activated in the configuration menu.
However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
See if you can help me on that.
Regards
Varun

Standard IDOC for WORK CENTER Master

Hi,
Please suggest the standard IDOC for work center master.
I have tried PWKC.Got DUMP when executed.
Tried on SAP-Market place for help.Suggested not to use PWLC.
Please suggest alternative.

Will you please explain in a bit detail if LOIWCS01 or LOIWCS02 are transaction (as i tried to execute) or programs or please explain how to use these.(I executed from command prompt and SE38 but didnt helped)

Table for work center..........

Hi
Is there any table for work center which shows available capacity v/s utilized capacity......Please revert with your valuable comments
Rgds

Hi,
Check Table RC65L.
Regards
Kannan

Number Range for Work Center

Hello All
Am having a little concern regarding the number range for Work Center, kindly let me know where the number range for Work Center is maintained or from where it is picked up when we are using external no range assignment for Work Centers.
Regards,
J K Tharwani

Thanks Sir for your reply,
Actually the requirement is the client want that Equipment number must be the same as the Work Center Code, and Work Center code which i have decided is something like 0101001 & if i give the external no to the Equipment then the system doesnt take the same number instead it takes 101001 i.e. it ignores the initial "0" in the work center code. Actually I wanted to see the no range from where the work center numbering is being picked up, but later on i came to know that there is no such no range setting for work center instead it has contol from no range for object type. Shall look forward to your valuable inputs & guidance.
Regards,
J K Tharwani

Customization Setting for Work center creation

Dear all,
What is the Customization Setting for Work center creation? How to do it?

Hi,
Here are the few things you can check
OP40 : WC category
OP17 : Formula for WC
Person responsible : Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers >>Define Employees Responsible for Work Centers
apart from above You can explore more in
Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers
Riyaj

IW37N/IW49N - Include Operation Work Center Text Name

We are using MRS and when we assign operations to specific technician work centers, it updates the operation work center. We have a need to have included on the layout the specific text name for the work center. In looking at other posts, the requests have been for personnel number name or other text but I have not see this.
We are at ERP 6.0/EP 3

Linda,
You will have to apply the same concept and extend the same using BADI_EAM_SINGLELEVEL_LIST to add fields.You would have to activate business function LOG_EAM_CI_2 to activate this BADI.
Regards
Narasimhan

How to find the reporting for work center machine wise

hi gurus
My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for this. Thanks in advance
kalyan

Hi Kalyan
you have to make some settings in production order & work center first.
In work center capacity header ,you have to make indiovidual capacities as 2.
In the same capacity header screen by going through the menu Goto--->individual capacitities define these different individual machines.
In the production order operation detail screen goto " capacity reqmt assignment " assign the quantities for different work centers.
Adfter this in the confirmation CO11N you have to fill the split field accordingly& confirm different wortk centers seoperatley.
Then you can the report in the CO14 for diferent work centers.
you try this.
Regards
YMREDDY

KE24 - Layout for Prifit Center Text

Hi Friends,
KE24 is the Standard report. The issue is
Profit Center field is there but client would like to see the "Profit Center text" as a seperate coloum for the purpose of Product family.
But i could not find in Layout and I think we can not change standard layout.
So any body who has the knowledge in ABAP can help me in this issue to find the "Text".
Rgds,
Raju

You should be able to get the required information of Profit Center from CEPC master table.
Thanks
Mohan

Capacity planning for Work Center

I programmed time for a Work Center on internal activity, for 40 hr using 100% of one resource, the work center it has a capacity of 8 hr each day, the activity gets a duration of 5 days and I indicated that it has to begin the first day of the next month.
When I executed transaction CM01, I notice that the 40 hours are planned for the actual day and don´t respect the dates of the internal activity, I think it is a problem with the work center but do not find the error.
Any suggestion where to look for?
The data used for creating the Work Center on Capacities:
- Capacity Category : 002 Person
- Other formula: SAP008
The data used for capacity:
- Base unit of meas.:H
- Start: 08:00:00
- Finish: 17:00:00
- Capacity utilization: 100
- No. of indiv. cap.:1
- Unit: H
- Relevant to finite scheduling: active
- Can be used by several operations: active
- Long-term planning: active
The data used for creating the Work Center on Scheduling:
- Capacity Category: 002 Person
- Other formula: SAP004
- Work dimension: Time
- Work unit: H
Best Regards...

Hi,
Please activate the capacity requirement in Capacity tab in CNR2.
Thanks..

PP costing Formula for work center

Hello Experts
I am having issue to set up formula for given below case,
I have on my work center three parameters, x time (unit: Hr) and   Y Power (unit:kw).
i want to multiply both the parameters and get the answer in terms of energy Z (unit: kwh) paramenter.
so i already define activity type unit with KWH.
for example:
From Routing:
work center: 1111,
x: 10
Y: 20
so Z= X*Y
       = 10hr * 20kw = 200kwh
So which would i apply formula for all 3 parameters to get result 200 kwh? Do i need to assign 3 different formula to X,Y,Z   or   1 formula direct to Z?
Sooner response highly appreciated
Thanks
Nixal

Dear Nixal,
Assume this 10 hours is for some base quantity and this value gets changed based on operation(order quantity) means,you can
check with standard SAP formula SAP006 = Machine * Operation quantity / Base qty.
In case if the duration 10 hours is for any operation quantity means,then there is no relation between base quantity and
operation,so you have to assign a formula which has only duration alone.
Likewise you can decide and select the suitable formula and use the formula key in the costing tab to calculate the cost based on
the formula selected.
Regards
Mangalraj.S

REPORTS FOR WORK CENTER EFICIENCY

Hi All,
I´m trying to find reports that shows work center eficiency. Anyone knows any standard report like this?
Regards,
Felipe Tavares

Dear
If you are looking for Work Centre Effiency report , then you should check the Utilisation of Work Centre in production in every months or you can compare the production actual and planned by work centre to know the effiency .
Some of the standrd txn :
1.MCPQ
2.MCP7
Customised report : http://www.onestopsap.com/sap-PM/compare.asp or with the following SAP Table :
WERKS         LIKE AUFK-WERKS,                     "Plant
      AUFNR    LIKE AFKO-AUFNR,              "Prod. Order No.
      PLNBEZ   LIKE AFKO-PLNBEZ,             "Header Material No.
      GSTRI      LIKE AFKO-GSTRI,              "Actual Start Date
      GLTRI      LIKE AFKO-GLTRI,              "Actual Finish Date
      GAMNG    LIKE AFKO-GAMNG,             "Prod. Order Qty.
      AUFPL      LIKE AFKO-AUFPL,              "Planned No. Of Operation
      AUART    LIKE AUFK-AUART,              "Order Type
      BUKRS    LIKE AUFK-BUKRS,              "Company Code
      OBJNR    LIKE AUFK-OBJNR,              "Object No. For Order Status
      KDAUF    LIKE AUFK-KDAUF,              "Sales Order No.
      KDPOS    LIKE AUFK-KDPOS,              "Sales Order Status
      IDAT2      LIKE AUFK-IDAT2,              "Order Completion Date
       ISM01   LIKE AFRU-ISM01,              "Required Qty.
      VGW01    LIKE AFVV-VGW01,              "Quantity Withdrawn
      VGE01    LIKE AFVV-VGE01,              "Unit Of Measure
      EFFPERC LIKE AFVV-VGW01,              "Eficiency %age
      MAKTX    LIKE MAKT-MAKTX,              "Material Descriptio
Try and come back
Regards
JH

LSMW for Work center text

Similar Messages

Maybe you are looking for