Lync Signin Problem
I have 0 background of Lync and I have installed it by following step by step installation tips from web.
now when i try to sign in from client . it give me error " Lync couldn't find a lync server for abc.com. there might be an issue with the domain name system(dns) configuration for your domain please contact support team. "
give you background my ads for lyn is on 192.168.111.50 network and lync FE also on 192.168.111.77
and my client is on 192.198.1.50 ....
other thing if i am not in office or on office network and out side office how i can signin ????
Salman
Check you have set the DNS server on your client computer.
If you didn’t set that, you can’t retrieve the DNS records.
As the IP address of your client computer is not in the same subnet with your Front End.
You need to have a route between these two subnets.
To avoid to use the additional route, you can use a IP address in the same subnet with Front End.
Lisa Zheng
TechNet Community Support
Similar Messages
-
David,
I have an Adobe Photoshop Elements 11 and Adobe Premiere Elements 11
dilemma.
I recently received a birthday gift of both software programs.
Following Adobe instructions, I attempted to use Adobe Download Assistant.
It rejected my input with the following notation:
"This e-mail address is already in use. Please use a different e-mail
address."
How can I use a different address? [removed by forum host] is the only account I have used for 20 years.
Previously, I have had some contact with Adobe. Never have I had any
trouble.
As I am anxious to use both Photoshop Elements 11 and Premiere Elements 11,
I would greatly appreciate any assistance you might have to offer.
John F. Jackson
[signature removed by forum host]David,
Thank you for your kind assistance.
I really appreciate all you are attempting to do for me.
John
In a message dated 12/11/2012 3:28:46 P.M. Eastern Standard Time,
[email protected] writes:
Re: PSE/PRE 11 Signin Problem
created by David Kastendick (http://forums.adobe.com/people/dave_m_k)
in Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/4913303#4913303) -
PS Elements 12 continues to report that there is no internet connection or the pc clock is not set correctly; this is not the case. It reports this when the signin to the editor is made. The firewall is off, the antivirus is off, the clock has been reset; what else is there to do to login to the editor? Never had this problem with PS Elements 10.
Is this the first time you are trying to launch the editor with a view to registering it and activating it? If so then I suggest launch the editor in Trial mode and before doing anything, go to:
Help >> Updates
Let it finish updating the product and then you can now go back to:
Help >> Complete Adobe ID .......................
This should make sure the PSE is awake and can go to the Internet.
Good luck but post back if this worked or not. -
HI,
I am unable to signin my skype using RTX 3088 dual phone. This is happend in march 2012 onwards. I don't know skype has fixed it or they are aware of this issue.
Any fix is available.
I have searched internet, seems there is no solution is available. Seems skype ditched phone users. Why are they selling this phone?.
Thanks
SivaLast week I received information from a Dutch forum that this connection problem 'already' had been solved by Skype and that Skype should work now on almost every dual phone. Well in my case it did not. So again I tried every possible solution I could find on the internet including resetting the base station bij pushing the radio connection button and the skype button simultaniously (a reset option not mentioned in the Philips manual), but nothing worked. Then I used the on/of switch on the base station but no result as well. As a last desperate attemp I unplugged the whole thing, waited ten seconds, plugged it in again and..... it worked!! I only had to reset date, clock, volume etc. But to my surprise all my skype contacts (removed by earlier attempts) appearded in the contact list again. So: problem solved!
-
I cannot sign in to the university of Miami website
https://wireless.med.miami.edu/login?
the wireless network is
Medical_Wireless
I have removed the Network then let the MacBook Pro find it again.
Safari stalls with a blank page when loading the public signin page.
My iPhone 4 works fine.Firstly, yes - if you have already set up your account for Comes With Music on the PC then the PIN number is finished - you only use the PIN once.
I haven't used this service myself because it is not yet available in my country, so I'm working blind here, but did you have the phone connected to the PC in Media Transfer mode when you created your account on the PC? I thought the system would insist that the phone be connected, but if not maybe the phone isn't correctly registered against your account.
Can you download a Comes With Music track on the PC and transfer it to the phone? If not, what message do you get?
I have heard of some cases where a problem with the memory card can cause a phone not to be recognised by the service as the right phone, in which case reformatting the memory card usually fixes the issue. -
Hi All
I am facing a problem with the installation of Lync 2013. It says Office is installing on the background and it hangs on 26%.
is there any way to make the installation faster?Please check you have the standard system requirements for Office 2013 at
http://technet.microsoft.com/en-us/library/ee624351(v=office.15).aspx.
Lisa Zheng
TechNet Community Support -
Lync 2013 problem with interaction in Hyper-V
Hello,
during the conference in Lync 2013 does
not work the guest interaction service,
which has been referred to the control
(display the
desktop). The
guest can move the
cursor, but
can't click or
write in Hyper-V virtual
machine. In
a virtual machine running Windows Server 2012R2. Enhanced VM Interaction is
on.
What to do to give away full
control for the guest?I may be confused, but it looks like you're trying to control a server VM with this capability. Do the actions require elevated or administrator access? If so, by security design this won't work.
"It is worthwhile mentioning that people who you gave control to in a desktop sharing session will not be able to interact with elevated prompts."
The article below mentions this, and suggests running as Lync as administrator which we've not had great success with.
http://blogs.technet.com/b/lync/archive/2012/11/02/presenting-your-screen-in-lync-2013.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Hi
I am not able to login to ORACLE using SYS/SYSTEM id from my SQL*PLUS. Instead i am able to login using some id that is not the DBA id then from there it's allowing me to connect thru SYS/SYSTEM id. What is to be done so that i can connect directly without going through this way.
Thanks
SugeshHi
I am using ORACLE 9i in WINDOWS. Then my question was that i am not able to connect to SQL*PLUSW using SYS/SYSTEM id directly instead i am now connecting to SQL*PLUSW thru scott and then from there using the command
connect sys/password as sysdba
to connect as DBA.
is there a way on how i can directly connect withby bypassing the first login that i am doing.
Stepwise:
1. Start->Programs->ORAHOME->APPLICATION DEVELOPMENT->SQLPLUSW
connect as scott/password
connected
then from there
connect as sys/password as sysdba
this what i am doing now
is there a way how i can
1. Start->Programs->ORAHOME->APPLICATION DEVELOPMENT->SQLPLUSW
connect as sys/password -
OSX Mavericks Appstore signin problems
Cannot sign in to Appstore after OSX Mavericks update. The prompt window asking for username and password is stuck in a loop.
It's possible #1 will do the trick, but you might need to do the additional steps in Keychain access.
1. Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
2. Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
(Note: I had to toggle the settings before it would stick)
Restart your system. -
Schedule a meeting via Lync 2013 client
Hi All,
quick run down of my set up,
Exchange 2013 SP1 (no UM) and new installation of Lync 2013 FE with Feb 2015 cumulative updates (no Ent voice )
haven't integrated Exchange with Lync.
my problem is when i try to schedule a meeting with a colleague via Lync 2013 client it says "no free/busy information could be retrieved and if i let it stay open for 5 min it will come up or unless I unselect and reselect the user the information
comes up.
any idea what's causing thus and how to fix it?
Thanks in advanceNot sure of a fix, but Michael LaMontange posted a workaround for it:
http://realtimeuc.com/2013/04/no-free-busy-when-scheduling-meeting-from-lync/
Some other thoughts here:
http://www.doitfixit.com/index.php?option=com_content&view=article&id=82:no-freebusy-information&catid=34:exchange-2010&Itemid=53
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How can I troubleshoot certificate issues on Lync internal usage?
We have CA in our domain environment. Lync server successfully requested and assigned 4 certificates from CA. (actually one certificate for own 4 needs).
All computers by default group policy achieved root CA certificate. And almost all sign in to lync without problems. But there are few computers which can't sign in followed with certificate problem.
So, at problem computer I opened certificate snap-in using MMC. Then I watched in trusted root certificate container for our root CA certificate. And it exists!
So, I manually exported Lync certificate from CA server, and manually imported it to problem computer to trusted root certificate authorities. - It haven't solved the issue.
I also tried to join lync by other accounts - no help.
I deleted all unused or self-signed certificates from problem computer, deleted all certificates from untrusted publisher container. - doesn't help
I reinstalled lync client, tried another versions. - doesn't helpWhat error did you get when you failed to sign in?
Have you error sign in on these computer successfully?
Check if you have Lync user certificate issued by Lync Server in user’s Personal certificate store.
Check if the same issue exists when sign in with different Lync accounts.
The following is a blog about Lync client authentication, it is useful for your further troubleshooting.
http://blogs.technet.com/b/nexthop/archive/2012/11/28/lync-2010-client-authentication.aspx
Lisa Zheng
TechNet Community Support -
Dear Sirs!
One of our customer have a MS Lync Server problem.
They are use Windows Server 2008R2 SP1 and configured windows Active Directory, Exchange Server 2013 standard, Lync Server 2013 standard
They have 100 client in MS Lync Server 2013 standard and these 100 users sliced into 7 group. Name of
Бүгд /it mean all/ group there have all users.
And when they start group conversation to Бүгд group the issue is that, some of the users see a blank conversation window after joining the group conversation these users cannot see the first message of the group conversation.
In the below link there is have same problem but they can’t find solution. So please help us how we can fix this problem?
http://social.technet.microsoft.com/Forums/lync/en-US/33c0135e-3862-42e5-885a-873583bd79b9/group-conversation-missing-first-message?forum=ocspresenceim
Best regards, Azbayar Bat-OchirHi,
As mentioned in the other post, in Lync Server 2010 this was by Design. I don't know if this changed in Lync Server 2013.
You can ask users to remove off-line contacts but I doubt that they want this solution.
David -
Lync 2013 with latest CU hang after sign in.
Description
A problem caused this program to stop interacting with Windows.
Faulting Application Path: C:\Program Files\Microsoft Office\Office15\lync.exe
Problem signature
Problem Event Name: AppHangB1
Application Name: lync.exe
Application Version: 15.0.4641.1000
Application Timestamp: 53c5caa5
Hang Signature: d2ef
Hang Type: 134217728
OS Version: 6.3.9600.2.0.0.256.4
Locale ID: 18441
anyone has any idea for this issue.
JasonHi,
Did the issue happen only for one user or for multiple users?
If the issue happen only for one user, you can try to login on other well-worked computer with the issued Lync account to test the issue. You can also try to use another well-worked Lync account to login on the issued computer to test the issue.
If the issue happen for all Lync users, please also check if Lync Server 2013 update to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Getting "Oops! Your Skype Name isn't an email addr...
I'm using the latest version of Skype for Desktop, and getting the following error message when trying to login.
Oops! Your Skype Name isn’t an email address.. Try again or choose another way to sign in.
I've successfully logged in with the same information to the skype website.
Now I'm stumped - can anyone help me please ?
Solved!
Go to Solution.
Attachments:
signin problem.jpg 82 KBThis is a problem with your Windows configuration, apply the .css registry patch to resolve the issue:
http://community.skype.com/t5/Windows-desktop-client/Skype-empty-sign-in-screen-Issue/m-p/2126425/hi... -
SIP/2.0 480 temporary unavailable federating with Skype
Lync 2013 trying to talk to Skype users using both outlook.com and msn.com are seeing this in the logs. Is this a problem at the
MS side or the client side? If its a pic.lync.com problem what could it be? Federation has been enabled with the pic guys sip.clientsite.com the edge server public name is sip.clientsite.com.
TL_INFO(TF_PROTOCOL) [EdgeServer]08D4.08F4::02/04/2014-11:38:52.444.00000A58 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265)) [1506311231]
Trace-Correlation-Id: 1506311231
Instance-Id: 1B8AA8
Direction: outgoing;source="external edge";destination="internal edge"
Peer: lync2013pool.local:49476
Message-Type: response
Start-Line: SIP/2.0 480 temporary unavailable
FROM: "Mark user"<sip:[email protected]>;tag=4d905fe173;epid=3e2026efe2
TO: <sip:[email protected]>;tag=eg8xooh0
CALL-ID: 9f551d7313e0486cbe204a8666ee9df0
CSEQ: 1 INVITE
Via: SIP/2.0/TLS 172.20.1.xxx:49476;branch=z9hG4bK93C79981.C17D7C9A7AABF9D5;branched=FALSE;ms-received-port=49476;ms-received-cid=3E2600,SIP/2.0/TLS 172.20.xxx.xxx:54034;received=172.20.1.xxx;ms-received-port=63663;ms-received-cid=5D400
CONTENT-LENGTH: 0
ms-diagnostics: 1035;reason="Previous hop public IM provider did not report diagnostic information";Domain="outlook.com";PeerServer="federation.messenger.msn.com";source="access.nccgroup.com"
ms-edge-proxy-message-trust: ms-source-type=AuthorizedServer;ms-ep-fqdn=edge.clientsite.local;ms-source-verified-user=verified;ms-source-network=publiccloud;ms-remote-fqdn=federation.messenger.msn.comHi,
This work before or is a new deploy?
Take a look on Provisioning Guide Skype-Lync
http://www.microsoft.com/en-us/download/details.aspx?id=39071
Please validated your Edge Deploy
https://testconnectivity.microsoft.com/
Did you install a public certificate on Edge Server?
It may take a 7 days after you provisionig for the federation to work.
Fernando Lugão Veltem
MVP Lync Server
**Ajude a melhorar o sistema de busca do fórum.Marque a(s) resposta(s) que foram úteis**
Maybe you are looking for
-
How to delay creation of VideoDisplay
My Flex' app reads an xml with different video-source-url's. On the same time the VideoDisplay is created. But it does not have the url for the VideoDisplay source property because parsing is taking to long. How can I delay the creation of the VideoD
-
Zip file of 8 Mb size is not been recived when using mailx in solaris 10
Hi, I'm trying to send a zip file of 8 Mb using below cmd uuencode .zip .zip|mailx -s " zip " [email protected] But i dont recieve the file. but I get mails from that system(just to make sure that mailing works from that system). What could be the re
-
What is the preferred app for editing Microsoft Word docs ie .docx, please? Many thanks
-
Clipping path in PS is not knocking out areas inside paths
Sorry if the thread title is rather oblique but I'm having a little trouble articulating what my issue is. I'm creating a a clipping path on a photo to place in ID -- I'm knocking out the background and there are areas within the perimeter path that
-
Static methods inside class in jsp can't make it work
Hello all i can't understand it why i can't declare the method as static method ? public class Request{ Request(){} private String paramValue; public static String getRequestParam(HttpServletRequest request, String param