Mass Transport

Hi There,
I would like to, enquire whereby I have a scenario to transport a mass amonut of Infocubes, Info Objects, Transfer rule, Key Figures, Characteristics which has a huge number of attribute's. How do I perform this, main task is transport from BW Dev to BW QAS and then to BW Prod. Can I have, the best practices and exact steps to do it.
TQ
Kumar

Hi Kumar,
go to RSA1 -> Transport Connection !
Personally, I follow this procedure:
1) go to transport connection
2) select your flow, but breaking it in these three steps (separately):
- infosource (and a dedicated TR in the following steps)
- dataprovider (and a dedicated TR in the following steps)
- query (and a dedicated TR in the following steps)
3) select "dataflow before"
4) drag and drop on the right hand side. assign to a TR
5) release and stms
This is a little time consuming (rather than collect all with 'before and after'), but gives safety about any interdependencies among the objects: if you start from the bottom you have the possibility to highlight the error and manage it without doing later and with no method...
Are you using the std system ???
Do you know how transport connection works ???
Hope it helps!
Bye,
Roberto

Similar Messages

  • How do we make automatic and mass transports via Solution Manager

    How do we make automatic and mass transports via Solution Manager ..
    how can we do this is there any specific procedure please let me know
    Regards
    Karthik

    To attempt a new chat session...
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    http://helpx.adobe.com/x-productkb/global/service1.html

  • Error when mass transporting roles

    Hello,
    I'm trying to mass transport all of our Z roles from one CRM system to another that's not in the same transport path and am receiving a "Unexpected EOF after ' ' bytes" error on import. The transport had about 60 pfcg roles in it. I then created a new transport with about 15 roles and receieved the same error. I then made another transport with a couple roles and it was fine. My question is how can I move all of my roles without having to do a few at a time. Is it possible? I'm not moving the generate profile or user assignment.
    Thank you,
    Alex

    Hi Alex,
    "Unexpected EOF after ' ' bytes"
    Please get in touch with Basis team and get the tp size checked. It seems the size limit of tp has exhausted. By increasing its size this issue might get resolved. Let us know if you need any more information from our side.

  • Mass transport strategy but satellite system is configured for ChaRM

    We want that all transports are automatically transported in the development test client.
    We have calling a job with program TMS_BCI_START_SERVICE in the satellite system. But this program can only be used for mass transports and does not work when single transports strategy is activated.
    Question:
    Is there no solution to transport all this transports automatically in development test client via mass transport strategy if satellite system is configured for ChaRM scenario?
    Thanks a lot in advance.
    Regards Urs

    Hello Michele,
    Please, check the point 5 in the link below:
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    I think that this information can help you.
    Best Regards,
    Diego Fischer

  • Mass transport: how to select more than 7 roles at a time

    I have about 50 roles I need to transport.  I would like to use mass transport, but when I select all 50 roles, only the first 7 are actually added to the transport list. 
    I have to repeat the selection many times before all the roles are included in my transport request.. still a rather time consuming process.  How can I select more than 7 at a time?

    > And now we're back to my original problem. 
    Oh, dear....
    > We have a structured role naming convention that would make it very easy to select with wildcards.. however, when I try to do it that way, the system won't let me select more than 8 roles at a time.
    This is where I think you do not have a problem but a misunderstanding. Never mind, we see those quite often.
    > See if you can reproduce this problem in your environment:
    I had to start it first (minisap Nw2004), renew the license and wait for the transport tool to compile. You've got me busy here on a saturday
    > 1. Start PFCG
    done
    > 2. Utilities -> Mass Transport
    yep, watched it compile.
    > 3. Click multiple selection button
    yep
    > 4. Enter a mask that would match more than 8 roles,
    yep
    > press F4
    NO! NO! NO! NO! NO! NO! NO! NO! NO! NO!
    This is where the misunderstanding starts
    > 5. Click select all (make sure more than 8 roles are selected)
    No
    > 6. Click copy button
    No
    > 7. Observe that only the first 8 role are actually copied to the multiple selection list
    Instead, hit F8 where you have hit F4 and find out all roles that fit the mask will be entered into the transport.
    You have mixed up the actual report selection and the search functionality of the selection screen. Play with it, it's fun.
    One word of caution: Mass transport can cause perfromance problems and errors. I always try not to enter more than 500 roles into a transport at a time.
    Cheers!
    Jurjen

  • NT DOS Script for Mass transports.

    Dear Friends,
    My system is 640. I have a list of 500 transports to be transported to PRD system. I am thinking of doing it at os level a script in NT which can read the transport requests line by line and writes the request number and return code in a log file.
    Please share any one having such dos script. I have unix but not for windows. Also please help if any one is aware of performing mass transports by other means, if yes then how ? please list exact step by step procedure.
    thanks for your help.
    Tony.

    Hi Tony,
    from performance point of view, it's better to mark your  requests and transport them together. Also inconsistencies (forget a data element, transported in 2nd request) will be avoided.
    In case transports are imported together, than all dictionary parts are imported in a first step, repository parts come later -> automatically correct import order, less activations.
    Regards,
    Christian

  • Mass Transport v/s one-by-one

    Hi Gurus,
    I am upgrading about 120 roles in Dev and then I will have to move them to QAS, do you think I should do the transport one-by-one or mass transport will work just as fine.
    <removed_by_moderator>
    Edited by: Julius Bussche on Mar 12, 2008 9:53 AM

    Hi Rohan,
    Thats the purpose of mass transport
    if there are too many roles, just push it in a single transport request.
    Both work just fine!
    Cheers!
    Abhishek

  • Mass transport of Model Orders

    Hi,
    I have a question. I need to transport multiple objects via one transport u2013 Model Orders.
    The standard transaction allows me only include Model Orders one by one;(
    This is how it looks like in a transport when you transport it standard way:
    Controlling: Model order     R3TR     KOM1     $$YB000101
    and inside the line (table key):
    Client     MANDT     C     3     100
    Order     AUFNR     C     12     $$YB000101
    And now I need to include all the Model Orders which starts with $$Yu2026could it be like this?
    Controlling: Model order     R3TR     KOM1     100$$Y*
    and iside the line (table key):
    Client     MANDT     C     3     301
    Order     AUFNR     C     12     100$$Y*
    Thanks

    Hi, you can try do it via SE80, open Object AART for R3TR add required IO's type to transport, but better to ask from your system administrator

  • Error when transporting transfer rules

    Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
    Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
    AND
    Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
    I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
    Thanks in advance.
    Diego Lombardini

    Hello Diego
    Do you choose the correct Transfer Structure in DEV?
    I mean the one that is assigned to EMP300.
    Are you saying that your PROD have the following:
    0customer_text_BA
    And that your DEV only have the following:
    0customer_text_BB
    If the answer to the above questions is YES;
    Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
    I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
    Use it with caution and do not mass transport when you use this option.
    Good luck
    /FZA
    Message was edited by: Fariborz Zangoui
    Message was edited by: Fariborz Zangoui

  • Transport roles and analysis authorization with user assigned

    Hi expert,
    I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
    Thanks for your time,
    Luis

    Hi,
    In role administration, you have the following options for transporting roles:
    You can download the roles from one system and upload them into another  
    You can import the role from a remote system using RFC  
    You can transport the roles with the transport function.
    Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
    Transporting Roles with the Role Transport Function
           1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
           2.      Enter the role to be transported and choose Transport Role.
    The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
    You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
    For more information go thrpugh the below link
    http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
    Regards,
    Marasa.

  • Approval for transports to Production

    Hi,
    I posted this in ERP and dint get a reply so i am posting here.
    I configured transport workflow QA approval procedure. When i approve the proposal it is getting imported into QA automatically. I want to approve but let somebody else to move the transport manually.
    How do i do this?
    Also once its moved to QA and tested fine how is the approval to PRD handled using transport workflow?
    Please advice.

    Hi Shannon,
    Apologies could not reply earlier.. I think this is one of the drawbacks  of transport workflow as suggested in the link below: 
    [Transport Workflow|http://help.sap.com/saphelp_sm40/helpdata/en/5a/34bd66c03d11d2851c0000e8a57770/content.htm]
    Please check from the 2nd paragraph onwards.
    Regardless of anything the sequence is the change owner's responsibilty. Even if mass transport option was invoked and the transports were released in wrong sequence then you would get this error in case of auto imports. Manual imports where you have a sequence control check is helpful but tedious business. I think the onus is one transport owners to ensure that the sequence of transport requests is correct in transport proposal in case of TMS workflow and in case of mass transports the transports are released in correct sequence.
    Coming to the QA approval step I believe that TMS workflow and QA approval are separate in the sense the individual transport and not the proposal gets approved. However I would really suggest ythat ou check with SAP itself on that .
    Regards.
    Ruchit Khushu

  • ChaRM: usage of ChaRM and none-Charm transport strategy

    Hi ChaRM-TMS Gurus!
    We have the following [SAP system landscape |http://www.file-upload.net/view-1086963/SDN_TMS_Ist_Soll.jpg.html] and would like to use ChaRM approach simultaneously.
    What are the minimal requirements concerning transport layers/routes, which settings should be changed?
    How much and which transport layer/routes does ChaRM need?
    a) 1 any new transport layer/route
    b) standard transport layer, transport layer "SAP" and others
    Should all the standard transport layer/routes from virtual systems to real QAS and PRD systems or can I start as follows:
    1) Leave the current TMS settings unchanged
    2) Activate the extended transport control
    Result: the current setting will be client specific and all the old transport requests will be moved to client specific transport routes
    3) change the transport strategy (from mass transport to single transport)
    3) Define new transport layer
    4) Define  new transport route for SAP objects from DEV to QAS
    and assign the transport layer from 3) (client specific)
    5) Define  new transport route ZXXX from DEV to QAS
    and assign the transport layer from 3) (client specific)
    6) Define the delivery transport route from QAS to PRD (client specific)
    7) activate and distribute the settings
    Thank you very much indeed!
    Thom

    Hi Martin,
    Solmaniacs' assumptions are correct. You can have as many source clients as you want.
    As long as
    - STMS configuration (transport routes, and domain links) are consistent
    - SMSY configuration (logical components are declared properly with assigning the right role types to systems/clients)
    - Project declaration are done correctly (so that from Solman solar_project_admin you can read the STMS as confiured in the distant STMS domain)
    - IMPORTANT: those configuration GO ALONG with each other !! (SMSY should nt contradict STMS for example...)
    The tasklist that is generated for each Solman project will be as follow
    - Node 1: Header Tasks (commun to all systems)
    - Node x: Corresponding to track x declared in Project (each Source System will have his own node with the corresponding track under)
    - Node x+1
    - Node ...
    - Last Node : Tasks for Tasklist closure - checks on scma consistancy and CTS projects closure
    So you'll always have n+2 nodes in your tasklist; n beeing the number of declared source (=dev) systems in project
    For each action launched from change docuemnts like creation of TR, release of TR or Retrofit (as Solmaniac said) you'll have an additional pop-up that will appears letting you choose the system you want to use for the action
    Hope its helpful
    Regards
    Khalil

  • PFCG - Role Transport button inactive

    Hi All,
    We perform role transport as usual but notice that the button has been greyed out. Same goes for mass transport. Both the button are inactive.
    Does anyone have solution for this issue?
    Thank you
    jyaki

    Hi Jyaki,
    Are there any recent changes made in the system? If the issue is due to missing authorizations, it should display an authorization error when you click the button, but should not grey out the button/options.
    By the way, do you have GRC ERM configured in your landscape?
    Regards,
    Raghu
    Edited by: Raghu Boddu on Aug 24, 2011 11:05 AM

  • Checking Transport requests present in two different clients.

    We have around 200 transport requests that have been transported by consultants from D01 to R01-client1/client2 and I need to check that which transport is present in which R01 system client.. i.e. a) how many of them are present in client 1, b) how many are in client 2 and c) how many are in both. We can check the logs of every transoprt through SE10 but Is there any quick/automated way of checking mass Transport Requests status ?

    Dear Raichandi,
    Please follow the below steps to get the desired information.
    1. Login to D01 (Dev client) to find the released transports..
    2. Execute transaction SE01
    3. Go to "Transport" tab
    4. Give User as "*"
    5. Select "Request Type" by tick mark as Customizing Requests and Workbench Requests
    6 Select "Request Status" by tick mark as "Released" only
    7. Click on "Display Button"
    8. It would display all the released transports requests.
    9. From here you can copy and paste all these requests numbers in the spread sheet
    (CTRL + Y) then use Mouse to select the requets, (CTRL +C), and then paste it in exel sheet.
    1. Now Login to the R01 (QA client) to find the import status of the release transports from D01.
    2. Execute transaction STMS
    3. Click on "Import Overview (F5)" or the Truck Symbol.
    4. It will take you to the Import Queues for the Import Domain D01.
    5. This is the option where you can select the Queue to see the desired information for Quality/Stag/prod system.
    6. Now double click on the required "Import Queue" for R01 (Quality system).
    7. Now Go to  "Import History or (CTRL+ F7)"
    8. Change the Filters as required (may be for time interval or remove any filter on client -Clt)
    9. The import History will display all the Imported requests in all clients in one system (SID), so for your case it will display requests for R01/client1 and R01/client2
    10.  Copy  the same in the spread sheet...
    11. Do the VLOOKUP to find which are not imported in which clients.
    Please provide the feedback if it works.
    Thanks,
    Vinod

  • Changing Original System and Transport Target System for Objects

    Hi Gurus,
             I need to do mass transport of all the Infoobjects to newly defined system. Since these objects have different Original system. Its giving me error. Again, for other objects, Transport Target system is QAS, But we want to change it to NBW (A new system to which we want to send transport) . I am able to change package of Infoobjects. Is there mechanism to change Original System and Transport Target for System? Please let me know ASAP.
    Regards,
    Harpal
    Message was edited by:
            Harpalsinh Gohil

    If you simply edit your original post, it will go to the top of the list. There's no need to post duplicates.
    Subjects with a subject of "Urgent" will be filtered out by a lot of responders.
    Why not close this thread and bump the other one?
    Rob

Maybe you are looking for