Material of different division allowed in the Sales order???/

Hi here is the issue,
A Material has been extended for two sales area but has a single division 20 as in standard.But when I create a order with a sales area with a different divison 10 ,the system surprisingly allows the material to be added to that order alotugh the divison of the material is different.
How can I stop this!!!!

Hello Sam,
Customer master is the primary master data in SAP SD. Typically SAP SD functional consultant will have to customize the customer master at least a little bit to suit the requirements of the project. Since this is very standard data and needs to be synced across systems ( For Example ECC CRM ), SAP allows very little customization to the customer master. Nevertheless, SAP allows full customization in the customer master in terms of fields (Hide, show, grey out fields, make fields mandatory etc)and external interfaces ( Interacting with external tax vendors like Vertex etc ) .
Its been defined per account group , company code and sales area.
Please refer following links for more info :--
http://help.sap.com/saphelp_46c/helpdata/en/dd/55f46c545a11d1a7020000e829fd11/content.htm
http://www.slideshare.net/eddai/sap-accounts-reveivable-customer-master-httpsapdocsinfo
http://home4sap.com/Blog/2010/09/customer-master-customization-in-sap-sd/
Customer master -control data tab --> Field VAT reg.no
Thanks/Rajesh

Similar Messages

Different message in va01: Defect in ECC6 server while saving the sales order .

Hi ABAP gurus,
I am in to upgrade Project In ECC6 server I am getting the different message when saving the sales order in va01 compare to old sever(4.7) .
I have to make it to the same message as it is in the 4.7 server.
plz help me .
Regards,
vanamaala kashavena

Hi,
IF xvbap-uepos IS INITIAL AND
        xvbap-zzhrs_conf <> 'X'.
        MESSAGE ID 'ZOTC' TYPE 'E' NUMBER '067' WITH
        'Please select Hours Confirmed in Additional data B'(302) 'for item'(303) xvbap-posnr.
      ENDIF.
this is the code in the PARTICULAR INCLUDE PROGRAM .
this is same in both the system ,but in ecc6 server,in message
popup it is not giving 'Please select Hours Confirmed in Additional data B' .
it is giving ORDER QTY FORMAT PERIOD (ITEM NUMBER(0010))
Regards,
vanamaala k

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

The sales order item & contains a different material

Hi,
Converted requisition into purchase order and now getting the following error: "The sales order item & contains a different material"
Any advice?

Hello Marianne,
Your PO seems to be created already, didn't you modify anything in it?
Did you already check in VA03 your post 380?
Génia.

1 line item in the sales order ship to different shipping address

Hi,
Our customer A have 3 different branches (meaning 3 different shipping address).
During the creation of the sales order for 1 material A, I want to ship 50pc to this customer A:
10pc to address A1
20pc to address A2
20pc to address A3
In my sales order, is there a way I just create 1 line item with the order qty 50pc for this material A, but split into 3 schedule line with 3 different ship to address?
I know there is alternate way where I create 3 different line item (with order qty 10, 20 and 20) and change the ship to address in the Item -> Partner tab. But using this method, I have to create 3 times of the same material in 1 sales order, just with the different shipping address.
I want to know is there a way I just need to create 1 line item?
Kindly please advise. Thank you.

Hi there,
When you have 3 different ship-to address, system will anyway create 3 different deliveries. This is coz if the header data in shipping (ship-to) is different, system will split the deliveries. Routes are different to 3 ship-to addresses & they cannot be combined in the same delivery.
So as mentioned in above thread, create 3 different line items or create different sales orders all together for different ship-to parties.
Regards,
Sivanand

The material account assignment group is missing in sales Order creation

Hi Gurus,
When creating the sales order the material account assignment group is not copied in the sales order line item.
For eg: when the sales order has 5 line item for one of the line item the material account assignment group is not getting copied.
I checked the material master - A/C assignment group was maintained.
I checked the revenue account determination every entry is maintained with respect to GL account.
But even though while creating the sales order the line item does not have account assignment group. Due to this i could not able to release the billing doc to accounting.
Please if any one can help in this regard to solve why the account assignment group is not copying in the sales order line item while creating.
Thanks in advance.
Jack

Hi,
May be the system is not updating the data. Try creating a new sales order to check. Also check the division of the product for which the acct *** grp is not showing.
Check whether the acct assgt group which you have maintained in the matl master and that in the acct determination (VKOA) is the same.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

Sample Material in the 3rd Line item of the Sales Order

Hi,
We have configured the system in the sales order as follows.
1. Commercial Material
2. Bonus Material.(ie Free Material)
Now, i want to add the 3rd line item in the sales order as Sample with different Material number. How go about this. kindly let me.
Regards
Ravi

Hi there,
Enter the material in the sales order & change the item catg manually in VA02.
But free goods & sample materials are dealt differently..
Freegoods is entered as TANN item catg along with nornam TAN item in standard order OR.
But sample materials or free of charge items are processed through different order type FD for eg.
Even thought the item catg proposed in FD is TANN,, the whole process will not have pricing as TANN items arenot relevant for pricing.
Regards,
Sivanand

When will EK02 appear in the Sales Order?? For different planning strategy?

Hi Experts,
In our SAP system ,when you create a sales order with a material which planning strategy is
50 Planning without final assembly (MTO) , in the item detail screen , on the "Conditions"
TAB, we will see condition type EK02 and its value.
But when I create a sales order with a material which planning strategy is 40 Planning with
final assembly (MTS),in the item detail screen , on the "Conditions" TAB, condition type
EK02 will not appear.
I have checked the customizing of our SAP system ,as follows:
For planning strategy 50, the Requirements class is "045"(MTO val. with cons.),and on the
configuration screen of Requirements class,we see "Condition type for copying costs from
line items" (CndTyLineItems) is null ,no value ,not "EK02".
And for planning strategy 50,the the Requirements class is "050"(Warehouse consumpt.) and
and on the configuration screen of Requirements class,we see "Condition type for copying
costs from line items" (CndTyLineItems) is also null ,no value ,not "EK02".
And on the configuration screen of Sale Order Type screen(VOV8), we see "Condition type for
copying costs from line items" (CndTyLineItems) is "EK02" for all the sales order type we
have used.
So I am very confused.
Why material with planning strategy 40 there is no EK02 in the sales order?
Why material with planning strategy 50 there is EK02 in the sales order?
Where is the EK02 come from? The requriement class ? Or the Salse order Type?
Are there any other customizing for Condition type EK02 determination?
Thanks very for any reply!!

Hi,
In MTO you will create Process order.
And to Produce a Item you use Sub components that is Raw material
That raw material cost is EK02 which you maintain in the Material Master - Accounting View 1.
You can see cost in the Process Order also .
Note : Dont post same in different posts

Custom duty should be copied into the Sales order based on material

Hi,
Requirement is only Custom duty Tax condition types to copied into the sales order based on material (for e.g A) .Suppose customer X is buying material Y then different tax condition types is to be applied but if the same customer is buying material A then only Custom duty will be copied.
But we can set in the customer Master whether the maerial is taxable or not.So where to do the right tax classification settings so that sysyem will automatically fetch the right tax condition types if i enter one material which is applicable for Custom Duty only
We are using TAXINJ.
Regards
Jyoti

Dear Jyoti
As per your post, the material code is different for the same customer and hence you can differentiate the tax classification in material master. That is for material X, if you maintain Tax classification 1 in Sales Org1 view, maintain 2 for the material Y.
Now maintain different tax code for these tax classifications in VK11 / UTXJ.
thanks
G. Lakshmipathi

Product hierarchy is not being maintained in the sales order material

Hi,
I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In none of these exits the PRODH field in XVBAP is being populated. I would like top know if anyone has faced a problem like this.
cheers
Aveek

Hi,
Thanks for your suggestion. The poduct hierarchy is maintained in the material master but not being picked up at the time of creating the sales order. I have found the solution and coding has to be done in the MV45AFZZ.
cheers
Aveek

Material Listing Error while creating the sales order

Hi Guru's
I have mantained a material in the lisitng for A002 combiantion for SO/DC/Pric. ref. material
While creating the sales order is throwing an error as material is not listed so the transaction is not possible.
I have done the basic invetingation on the folowing aspects
1)checking the material in the listing
2)Validity periods
3)Material not blcoked
4)Mateial is extened for the respective sales org
Kindly help ASAP.
Thanks & Regards
Tarakaram

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

Sytem should not allow to save the sales order based on risk category

Hi,
My user want to control the creation of sales orders based on risk category in credit control area.
We created a new risk category - 30 Not authorized.
And we made necessary configs also , like assignment of risk category and company code in OVFL.
We assigned 30 risk category in FD32 for customers also.
But while creation of sales order system is allowing to save the order.
My user requirement system shoud not allow to save the sales orders for those are customers belongs to 30 risk category.
How can we config. this
thanks
Sateesh

hi,
dont want to save the sales order if the credit limit exist ?
then maintain block in OVA8
choose
your credit control area risk categories credit group
1000 30 Not authorized 01
checks tab
choose static and maintain B
this will give you error message and it will not allow you to save the sales order
regards
senya
Edited by: senya_1111 on Oct 1, 2009 2:26 PM

SD - Manual entries allowed for item category in the Sales Order

Hi experts,
please do you know any OSS note related to SD, in order to increase the number of Manual entries allowed for item category in the Sales Order (table T184)?
Thank you very much
Andrea

Hi,
I searched OSS notes and did not find any OSS Note related to add more than 11 Manual Item categories or append T184 Table.
Has any found solution for this, will this be a CORE MOD.
Pavan Verma

Net weight of the material is not copying from contract to sales order

net weight of the material is not copying from contract to sales order?
plz help me

Hi,
If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
Please check in the Contract whether the vales derived from Condition records are entered manually.
If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
Please maintain the CONDITION RECORDS and check whether they have copied or not
Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s D
Please check the above settings and let forum know the feedback.
regards,
santosh

PP: Production Order Qty UOM should be based on the sales order Qty UOM though having Alternate UOMs in material master

Hello PP GURUS I am new to this and i have one issues. I.e., While creating the Production Order, want the unit in the production order should be based on the sales order unit instead of what has been defined in the material master. Since, having 3-4 alternate unit of a material & can create a Sales Order in any one of them.
Also pls let me how to go through
either with the help of ABAP or configuration.
If it is with the configuration pls let me know the solution to arrive.
Eg: Base UOM is KGS
Alt UOMs: SQM, MTR, NOS
Sale order is Prepared with SQM and the same shall be in production order too to produce qty.
Pls help me.
rgds,
Kumar V

Hi
First you have to maintain alternate units in mateial master for that first go in additional data & maintain the alternate units as below..
For example
1200 M2=1 KG For SQM
12 M=1 KG For MTR
3 PC=1 KG For NOS
And then you can get Sales unit field in sales data 1 view enter your sales unit in that field & you will get production unit in work scheduling views as per your desire production units and according to that units your sale order & production order will pick that units & you can proceed accordingly but remember that first maintian the conversion factor as above other wise it will not accept hope that it will help you have a nice day...
Regards,
Reena

Material of different division allowed in the Sales order???/

Similar Messages

Maybe you are looking for