Maxwell Air Voltage - wireless charger

Hi,
I bought recently a Maxwell Air voltage, wireless charger.
When charging, my iphone 4S does not stop vibrating every 2-3 min.
I would like to know if there are other similar experiences.
The company Maxell says this is not an issue, what I can't believe.
Kind regards,

When you say vibrating are you saying the iPhone physically vibrates or the vibrate alert activates?  Eitehr way does not sound like it would be a good thing to have happen because of charging.  You might want to check with Apple support or a genius bar person and see if this is a problem for the iPhone...the iPhone is a lot more expensive than that charger.

Similar Messages

  • My MacBook Air won't charge, have tried SMC reset too..

    I have noticed today that my MacBook Air won't charge. I changed the socket I was using to a different one in the house.
    The charger itself is not hot. Has not been used at all today.
    Have followed a link on here and tried an SMC reset to no avail.
    This is what my system report has to say: (my charger is attached right now - no light)
    Battery Information:
      Model Information:
      Serial Number:          D86207311M5DKRNAA
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          406
      Hardware Revision:          000a
      Cell Revision:          162
      Charge Information:
      Charge Remaining (mAh):          2369
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          6463
      Health Information:
      Cycle Count:          25
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1370
      Voltage (mV):          7478
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          1
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          1
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    In the middle of writing end of year school reports, not ideal!
    Any advice?

    Edited to add -  only a few months old... grrrrrrr

  • My iPad air won't charge.  I have used both the charge cord that came with it, and a second that I bought at the Apple store.  I have used both the charger that came with the iPad, and others that are working with other iPads.  It charged yesterday.

    My iPad Air will not charge.  I have used its original charge cord, and a second Apple lightning cord.  I have used the original charger and others that I have confirmed do work.  It charged yesterday, no problem.

    Before going to the Apple store carefully examine the lightning port to make sure no fuzz or other foreign stuff has gotten in there. There are not that many things that can prevent an iPad from charging. You've tried a different cable, different charger and hopefully the reset suggested by Barry in the previous post. Check for debris and if the port is clear Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Do I need a different back cover for wireless charging with the Droid Turbo?

    Do I need to get a different back cover for Qi wireless charging on the Droid Turbo?  Or do I just need the charging pad?

    One thing to Remember there's usually a Sweet spot that the phone has to be right on to make it work, And just to be aware some wireless chargers can cause Warmness in the Battery and the Backs of the phone..
    Here is some Accessories From Motorola for the Turbo:  Just click on the blue Link
    Power - Smartphone Chargers and Portable Chargers by Motorola
    Music
    Talk
    Motorola

  • My ipad air won't charge. I am using the correct cable supplied with it. I have restarted it and it still won't work.

    My iPad air won't charge. I am using the cable suppied. It shows the charging icon for a split second then says not charging. I have tried re starting and nothing changes.

    Z zoozx ,
    How could Microsoft come up in a forum about an Apple problem?  We have heard for years how superior Apple products are but we've never had as many headaches and problems with our Windows PCs over the years as we have with the Apple devices we now have.  My wife has the most recent iPad and my son has the most recent ipod Touch. Earlier problems notwithstanding, the iOS 7 upgrade was horrible and hard to imagine for a device where the company controls all of the hardware and the software with no variants.  As for Microsoft, I can say I have programmed on many various platforms from PolyForth to Unix to Windows and .NET.  I think what many Apple users don't understand about Windows is the sheer magnitude of variables in making the software and all upgrades work for such a myriad array of hardware platforms and usage scenarios across an enormous number of partners and small to large enterprises.  Anyone who has worked with a large integrated system can get a sense of this.  I work in healthcare and our HIS system is rated #1 in it's class (built on a derivitive of an old MIT OS) but due to it's vast integration capabilities and the variety of usage and setup variables from site to site, it requires daily dilligence in error reporting and resolution across all of it's applicaitons.  Microsoft Windows works and integrates with a massive number of other Microsoft client and server solutions that are used by the vast majority of enterprises in the world. It's no small feat to keep the Microsoft software stack in good working order.  Of course everyone is entitled to their opinion but I wish we could past this ABM mentality that pervades online forums. I'm not sure if you've noticed but the Apple forums are jam packed with folks like yourself and me having problems with Apple hardware or software so I'm not sure where we can say one is better than the other, even if you could carve out some realistic benchmarks from which we could compare them on an even playing field. 
    With all the said, and I apologize but feel that the Anti MS anecdotes belong left long in the past, but any ideas on how we can get the supplied power cables to charge the devices they came with? I don't believe I've ever encountered a problem at the power cable level like this in which 2 cables are not working on 2 different devices. I think it points to software problems but as someone else mentioned about display settings, I'm not sure how your display settings affect the charging of a device in a non display mode. Would that suggest the thunderbolt cables are not capable of delivering enough charge to keep up with idle power consumption? 

  • Nokia lumia 1520 with Nokia Wireless Charging Plat...

    I brought a nokia lumia 1520 and a wireless charger from AT&T. I tried to charge my phone when it had almost no power in it. But the white light kept blinking while I put my phone on it. And I'm sure that no other device between the two objects. Does anybody know what is going on with it?
    Solved!
    Go to Solution.

    The AT&T 1520 does not have Q1 wireless charging. This is what the DT-900 is.
    It has PMA wireless charging. AT&T had Nokia change the wireless chang platform to PMA, which is different than other Nokia phones.
    Complain to AT&T !     I did.

  • HT1476 Message: charging is not supported by this accessory. Tried 3 charge cords, blew all clean with air, no phone charging icon.

    Trying to charge the iphone 3.  When connecting charger, receive message " charging is not supported by this accessory".  Three chargers tried and do not work.  Blew all connectors clean with compressed air.  Battery charging icon does not show when plugged in and phone slowly losing power. 

    Clean iPhone charging port with clean toothbrush and small amount of Isopropyll Alcohol. Clean very well especially on top of the midrib which is where the pins are.

  • Is it normal when iPad Air heats while charging or in normal/gaming use?

    Is it normal when iPad Air heats while charging or in normal gaming use?

    Yes, when playing graphic intensive games.
    It should only be slightly warm when you charge.

  • Lumia 822 wireless charging: really misleading, No...

    Quite annoyed by this:
    If you look under Lumia 822 specifications, they say this:
    http://www.nokia.com/us-en/products/phone/lumia822/specifications/
    (Under Hardware):
    Wireless connectivity
    Bluetooth 3.0
    Near Field Communication
    Wi-Fi Channel bonding
    WLAN IEEE 802.11 a/b/g/n
    Qi Wireless charging
    However, as it turns out, 822 also requires a wireless charging shell? For the 820, at least you see that as a listed option under Accessories, but for the 822, it is not there?
    I dunno - seems wrong to me; why not have a "*" is there is a footnote needed that wireless charging shell is needed? I guess I'll keep the dual wireless charger I bought for the future with the hope that shells will become available and will not cost too much?

    @slaverenz-     read the user guide: http://nds1.nokia.com/phones/files/pdf_guides/devices/822/Nokia_Lumia_822_UG_en.pdf
    Page 16.
    In order to charge wirelessly, NFC must be enabled.  I talked to Nokia support on the phone.  NFC is necessary to connect the phone to the secondary device, whether it be a charging plate or headset, etc.  When one goes to the settings and turns on NFC, only NFC sharing is enabled.  When the shell that has not been released becomes available, it contains an NFC contact point (square) that must touch with another device to activate (the center of the charging plate for example.  The phone does not charge via NFC, but connects wirelessly to the charging plate through it.

  • Lumia 925 + wireless charging back = broken BT voi...

    I'm posting this in case anyone else has discovered this problem.
    I've got a Lumia 925 with the wireless charging back fitted. If I use the phone with a Bluetooth headset to listen to audio on the phone, it is fine. If I use the BT headset, or BT functionality in my car, to make or receive a telephone call, the voice audio is very broken and intermittent. Sometimes ending and restarting the call clears it, but not very often.
    What *does* cure the problem is removing the wireless charging back. I have noted that the phone does NOT need to actually be charging for the interference - it just needs to be fitted.
    I am NOT sure if the problem is being caused by the accessory or by the phone itself. I am arranging for the accessory to be replaced first (less hassle) but it could well be the phone.

    I am having the same exact problem. I was initially thinking that this is some compatability issue between my car's integrated BT support, but as you suggested, once I have removed the charging cover, the issue is gone. What's interesting is that this will continue even if the cover is removed from the phone and until next restart of the phone.
    Anyone has solution to this? BTW: I can confirm that in my previous Lumia 920 and my wife's Lumia 820 with wireless cover this does not happen.

  • Nokia Lumia Icon + DT900 wireless charging problem

    I bought a Nokia Lumia Icon which had a defected SIM card tray. I replaced the daughter engine board where the SIM card tray is located without charging the phone first (the battery was completely empty) and now when I'm trying to charge the phone wirelessly with DT900, it just doesn't work. So I don't know whether it worked (or not) before my fixing procedure.
    DT900 works with my wife's Lumia 1020 and my Lumia 928 so there's nothing wrong with it.
    So all you technical gurus over here:
    1) how does the wireless charging work with Lumia Icon/930? I.e. does anyone have any wiring diagrams for Lumia Icon/930? There are two pins on the main board but where do they go? I didn't detach the main board, only the engine cover assembly and the battery in order to replace the daughter engine board where the SIM card tray is. So does the engine cover assembly have anything to do with the wireless charging (I don't think so) or do those pins go straight to the battery?
    2) does anyone know whether this is a common problem among Lumia Icon / 930 phones? A type fault or a serie of phones with defective rear cover and its wireless charging assembly?
    I'd really appreciate if someone could help me. Thanks a lot in advance! 

    Sensonic wrote:
    No problem, I fixed it by myself.
    And I think that this kinda censorship sucks  
    I can understand that when a manufacturer provides a free user forum they do not appreciate information posted which may cause problems and then be held responsible for the damages as it is an 'official' resource provided by the manufacturer.
    I'd suggest you lookup the meaning of censorship which this most definately is not.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Case for note 4 with original wireless charging cover

    I bought a samsung wireless charging cover for my note 4. When I tried to out the case on it, it no longer fits. After doing research I confirmed the phone is slightly thicker now. What cases are compatible with this set up?

        I apologize joevas22, I didn't mean to insult you; I need to make sure this was done. I researched this quite thoroughly since you mentioned the size had changed. As stated in the link provided, the dimensions are 8inX2inX5in; our model is 6.04inX3.09inX0.33.  I assure you, this has been the only model we have and not changed anything. This is the link to the manufacturer's page http://bit.ly/1GbpHCS as well as ours http://vz.to/1ttodxd so you verify the information I provided is accurate. I am not sure why the seller listed the case as compatible with all models.
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Missing Samsung Wireless Charging Pad with Purchase of Galaxy S6

    Hi Bestbuy,
    I recently ordered the Galaxy S6 on bestbuy.com. I saw a page that said Free Samsung Wireless Charging Pad with Galaxy S6 purchase valid 3/27/15-5/9/15. I noticed it wasn't added to my order. I also called the customer service line and the representative didn't know what I was talking about. Could you guys please help me out.
    Thank you!
    Jason

    Hi JDiep,
    I hope that you have had a great weekend thus far.
    From the information I have reviewed, we did recently offer a free Samsung Wireless Charger with the purchase of a Samsung Galaxy S6 or S6 Edge.  You would need to have added the charger to your online shopping cart during checkout in-order to advantage of the promotional offer.  I looked over the order you placed using the email address you registered with the forum and it does not appear the charger was attached to your order when it was submitted.
    With that having been said, I will be sending you a private message so that I can go over your order with you in additional detail to see what I can potentially do to help.  To check your private messages, you will want to login to the forum and click on the little yellow envelope icon located at the top of the page.  I look forward to further speaking with you.
    Thank you for posting to the forum and enjoy your new Samsung Galaxy S6!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Wireless Charging Stand NFC Not Working

    I am trying to figure out how to configure the NFC for the DT-910 Wireless Charging Stand for my Nokia Lumia 920. It charges fine, but I cannot figure out how to get the NFC to work. When I go to the Accessories Settings, nothing is listed. Do I need to manually download something to do the configuration?
    Solved!
    Go to Solution.

    Ok, through trial and search I found the solution!
    In the nokia forums, look at this post:
    http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/m-p/1640082#M242
    install the lumia pusher
    open the new app
    select the “accessories” app and let it install (note the 928 isn’t listed, but it works)
    now go to your normal “settings” and scroll down to the bottom and you’ll see “accessories nokia accessories settings”
    tap your phone on the base of the stand and it will ask you to run the app (approve). You can make settings changes now for weather, clock, calendar, etc.
    Kevin

  • Wireless charging plates not working

    Just received two wrieless charing plates. Despite of the fact that their power adapters are white while they are black (Would be nice if Nokia could match their colors, it isn't so hard and would look much better) none of them seem to be working.
    Tried both of them with two different Lumia 920s and nothing happens, no lights or anything. Is there anything I'm missing or did Nokia just sent two deffective units? I find it hard that I was that unlucky.
    Any help would be greatly appreciated.

    Hi there mate,
    Please check that you have placed the 920 in the correct area against the charger so that they charge. The area of the backside of the 920 that supports the Qi wireless charging is indicated in the user guide. If you have checked everything else, and it still isn't working, then you may have faulty chargers, or the phone's wireless charging function itself may be defective. It would pay to check with the retailer that you purchased the phone / charging plate with, to see if you can get it working in their shops

Maybe you are looking for