Missing authorization to view line items

Hello guys,
I am having issues viewing line items for a particular vendor. I have access to the line items of other vendors.
I get this error message when I try to view it. And when I click yes, I can only view the credit entry.
Kindly let me know how to resolve the issue.
Thank you and have a nice day!
MichaelJ

Hi,
Please check whether following parameters exists in User ID
a. FIT_ALV_AR
b. FIT_ALV_AP
c. FIT_ALV_GL
Hope, this solves your issue else revert.
Regards,
Tejas

Similar Messages

Prevent user from view line item details in KSB1 report

Hi,
how to restricting user from view line item details by double-click on it or highlight an item click on Document?
Regards,
Kelvin

Hi,
This issue got resolved.
SAP suggested to execute the program "FAGL_CORR_0001" for company code wise.
In ECC 5.00 from support pack 10 onwards two new fields has been added to table FAGLFLEXA. (earlier we are on support pack 9, recently we applied the latest support pack)
If we can execute the above program FAGL_CORR_0001, the two new fields will filled with relevant data and then we can able to use drill down option.
This is for your information.
Message was edited by:
prasad naga

GL View Line Items on Form

Hi All,
I have a requirement to print GL View Line items from F.62 instead of Entry Level Line Items...
The Program RFKORD30 with Correspondence SAP09 prints the BSEG Line Items ( Entry Level Line items) but i want the GL View Line Items coming from FAGLFLEXA
Is there any different driver program other than RFKORD30 ...
1)Is it Possible to print out in a form GL View Line Items from f.62 ?
Thanks

Hi Julie,
I'm trying to print out the GL View Line On the Custom Designed SmartForm or Script.
RIght Now we have
Correspondence type SAP09 which is linked to Program RFKORD30 which in inturn linked to SAP Script F140_INT_DOCU_01
When we use F.62 with SAP09 as Correspondence Type --- Its printing the ENtry View Line Items i.e what we see in BSEG Table WITH HEADER INFO FROM bkpf
But what we are looking is to print GL View Line Items coming from FAGLFLEXA (Instead of BSEG)
corresponding to same document number from BKPF
I hope i'm clear ..
Any help is appreciated
Thanks in advance

Just downloaded Firefox 4, and am missing an entire view line, No where to put my homepage. Ho w can I get it back??

I had the line before and miss it terribly. Is there somewhere to get the view line which has the place for homepage and I guess there are even more applications I would be able to use. Help!

Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
* http://kb.mozillazine.org/about%3Aconfig

How to correct Missing Profit Center Voucher Line Items

Dear Sir,
We had posted a Depreciation Voucher and in the generated Voucher there were some line items having Profit-Center missing . As we were told that Depreciation Voucher can not be reversed , so we got struck with the problem .
Now we are required to correct the entries in the Voucher which are having missing Profit Center . Kindly guide us , what steps should be followed to resolve the problem .
Regards
B Mittal

Dear Mr Saurab
Thanks for nice reply . As suggested I passed entry using Tcode 9KE0 and incorporated the Profit Center correction .The document also got posted as type A0 .
However when we are taking the report for the reference GL & Profit-Center using Tcode S_ALR_86000030 , there is no change in the figure . The figure remain same as appeared before posting of Document using Tcode 9KE0 .
Kindly guide us on the above please .
Regards
B Mittal

Line item only display after run RFSEPA01

Hi expert,
I set up all gl account with line item display but i need to block GL and run program RFSEPA01 so that line item will posted to BSIS table.
Is this need to run every after new posting done in?
As i run for one GL before with RFSEPA01 after new posting to that GL, i not able to view line item in FS10N, therefore i go and run RFSEPA01 again.
Is this everyday i need to run & re-run for all gl? Is there any configure i missing?
Please advice on menu path to configure the link to BSIS table.
Thanks.
regards,
chuan

Dear,
What is your requirement?
Why you are running RFSEPA01 daily when there is option "Open Item managed" ticked in FS00?
Program description: Switch On Line Item Display by Changing Master Record.
TABLES: bsis,
       *bsis,              "#EC NEEDED
        bsas,
       *bsas,             "#EC NEEDED
        bseg,
        bkpf,
        skb1,
       *skb1,
        ska1,
        t001.
RFSEPA01 is used when the GL Account is not there in open item status and need to change that to open item managed.
Check once again

Cost center line items

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
hi
 while accessing t code ksb1 report iam geting this error message
Message no. KB420
Diagnosis
No line items were found that satisfy the selection criteria. Possible reasons for this are:
u2022 You have no authorization for these line items.
u2022 You have other criteria active besides those selected in the initial screen (with the function "Other selection criteria".
u2022 You have set limits on the selection using the function Settings -> Transaction.
For example, you may have selected the transaction "Distribution", although no distribution has yet been run.
Procedure
1. Check in your user master which authorizations you possess for reporting. The authorization object is K_REPO_CCA.
2. Alternately, change your selection criteria.
wht is this wrong in this

Hi,
What SAP version do you use?
Regards,
Eli

F-53, Simulate time getting message "Correct the marked line items"

Hi All,
While posting the outgoing payment (F-53), at time of simulate I'm getting the message " correct the marked line items" & missing the vendor side line item but showing for enter amont( bank acccount line items) on screen.
when I trying to do the second time, I observed that, process open item screen, amount entered & Assiged amount both showing minus(-)sign
I guess the message getting because of the same sing(-) of vendor item & bank account,
Can some one help me out to understanding the why it showing same sign and reslove the issue
Thanks
Ramakanth

Hi Ravi,
Yes, I have posted FB60 and in FBL1N showing credit balance of vendor but when clearing F-53 suprisingly showing wrong side amount I mean assigned amount( open item).
Is there any configuration missing or any thing i missing is system.
Thank you
Ramakanth

Balancing Field BA in line item no Filled

Dear Experts,
We have configured Business Area/Profit center/ Segment as characteristics of Doc. Splitting and have created Substitution rule using BSEG table to Fill in BA using Plant Field (WERKS - as Plant and BA are identical) in Balance Sheet GL a/c line items when BA is missing in automatically generated line items.
Unfortunately there are Automatically Generated Line items without Both BA & Plant so i can't create the substitution rule for this line item directly.
Therefore we are getting an error messages for such line item as mentioned above.
Pls. kindly help how to resolve this issue. Urgent!!! Is there any formula i can use in substitution.
Thanks & Best Regards,
Aziz

Hi.. experts,
Any help?
Best Regards,
Aziz

Display projet planned line items CJI4

i have done planning on wbs *** cost element level in CJR2 along with quantity
im trying to run report CJI4 but no line item selected.
No line items were selected
Message no. KB422
Diagnosis
No line items were found.
Possible explanations:
You have no authorization for these line items
You have activated criteria that exceed the initial screen (by means of the 'Further selection criteria' function).
Procedure
1. In your user master, check which authorizations you have for reporting
2. or change the selection criteria.
how can i resolve it

This is an extract from help.sap.com:
In project cost planning, line items are only created if the project or WBS element has a user status to which the business transaction "Plan line items" is assigned. This being the case, plan line items only document the changes made from the time when planning documents are written for a project or WBS element.
In planning, you can define whether line items should be written in a plan version for cost and revenue planning activities.
If planning integration is active in the fiscal-year-dependent parameters of the relevant planning versions, the system writes cost element planning line items for plan-integrated WBS elements, regardless of user status.

FBL5N: missing one line item while viewing the report in spool

Hi Experts,
I 've got a problem while viewing FBL5N report in spool. The report is missing one line item, but when I
execute it in foreground, the report was ok.
Can somebody explain?
TQ.

Hello,
It seems you should implement notes 1100728 and 1166251 !
Best Regards,
Glayds xing

Actual line items KSB1 some line items missing

Hello friends
i am facing a issue related with transaction code KSB1 ,
i have posted cost center through FB60 and able to view the same document by fb03 & actual cost document by KSB5
but i am not able to see that item from standard ksb1.
when i execute the same report for privious fiscal years i am to see the line items .
but not a single document for the current period ? why ?
i have checked for authorization also but that is also ok .
thanks in advance .
Sachin S. Joshi

Thanks A P
but i am making proper selection , as i have mentioned i am able to get results for the privious fiscal years posting ,
second thing i am able to view the same document with KSB5 which is not appearing in KSB1 report for the current period.
Thanks
Sachin

Customer line item missing in accounting doc after billing

Hi experts...
We are facing an issue after generating billing document, accounting document is created automatically but in that accounting document the customer itself is missing in the entry where as other line items like revenues, taxes are visible. where could have been the mistake. Kindly help with the possibilities of missing configuration.
Ideal entry should have been like
Customer dr
Revenue cr
Output tax cr.
Cheers,
Sravanthi

Hi:
Check for missing authorization in SU53 immediately after you face this issue..I think you are missing an authorization object F_BKPF_BED activity 03 or F_BKPF_BES Activity 03/.. Please ask BASIS guy he will resolve your issue.
Regards

Line items are missing during transferring ITS to EBP--tricky problem

Hi,
We are using EBP 2.0 version.
Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
This is happening randomly.we had checked all the shoppping cart related tables in EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated except first one.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but i couldn't find the problem.
any one could you please advise me....why this is happening?whether it is a version problem?
Thanks,
Ravi

Hello Ravi,
I guess you already checked OSS notes for this.
Have you checked in the area of ITS ?
When ITS sends data to EBP, only the actual screen data is sent:
- item procurement data from basic data
- item accounting data from accountig tab
then this data is used to update the SC.
If you have debugged those 2 screens, you should see what is happening.
You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
Finally, there are two options:
- this is an ABAP error, so you should catch it in debug
- this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
Rgds
Christophe

BAPI_PO_CREATE1 missing GL a/c no. and cost center in every 100th PO line item

We have a strange issue. We are creating Service Purchase Orders by using BAPI_PO_CREATE1 function module. The source for creating PO is a Z table wherein it contains approximately 1000 records. We create one PO per Vendor and all POs are creating successfully but strangely GL account number and cost centers are missing in every 100, 200, 300, 400, 500, etc. line items and have NO issue with other line items. Our purchase order line item interval is 1 which means at every 100th line item we have an issue in missing GL account number and cost centers. We also checked by changing line item interval to '10' and still we have issue at every 1000th line item.
We searched for OSS notes but no luck. Did anyone come across this kind of issue ? Could you please advise.
Regards,
Krish

you can either share your code and your source file to have the people check if the error is on your part or you can directly contact SAP if you are the opinion that it is an error in their BAPI code.
But without looking at code and source file it is not possible to do any evaluation except you are looking for clairvoyants

Missing authorization to view line items

Similar Messages

Maybe you are looking for