Missing items in mailbox

folks need a little help
i have a iphone, with 2 different email address from comcast (x and y)
phone has email address x and y
email address x has the inbox tab, sent tab,trash tab
email address y has only inbox tab, but no sent tab or trash tab
how do get the sent and trash tab to show up in email address y

You're welcome.
This may be unique to Apple's email client but mailboxes for an account - especially with a POP account are not created until the function is used by the account. The account's Drafts mailbox is not created until saving a Draft with the account and so forth.

Similar Messages

[Sales A/R] [Sales Report] [Open Item List] [missing item]

Dear Expoerts,
Business One 2005A:
How to restore or rectify the 'missing item' on the Open Item List?
There is an item shows Commiited 10 however there is no corresponding Sales Orde.
Since there is no stock therefore data shows Available -10.
How can we purge this bug because we tried Goods Issue and Restore, neither methods can do anything about it.
Your advice will be very much appreciated.
Kunitomo
Tokyo, Japan

Dear Gordon,
Yes, i'm sure. When i test it, i copy Sales Order (eg. got 5 items - 4 of 5 item is 0 amt) to Delivery Order (got 5 items - 4 of 5 items is 0 amt). Then i delete the row of 4th & 5th item with 0 amt.
FROM Sales order:
Example: 1) Item A      $1,000.00
               2) Item B              $0.00
               3) Item C              $0.00
               4) Item D              $0.00
               5) Item E              $0.00
To Delivery Note:
Example: 1) Item A      $1,000.00
               2) Item B              $0.00
               3) Item C              $0.00
               4) Item D              $0.00 (Delete row in Delivery Order)
               5) Item E              $0.00 (Delete row in Delivery Order)
After i check the Open Item List - the amt, net & tax do not show the figure for this Sales Order. The Sales order just show $1,000.00 in "Original Amount" in Open Item List.
Please check for me, the SAP B1 system std is like that?
Thank you.
Regards,
Sheon

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

Open Items List- Missing Items

Dear all,
In the open items list there is an option in drop down for missing items. When we select the option some items and its details get listed. What is the information being communicated by this selection?
Thanks in advance

Hi!
Select the option Missing Items to display a list of all items with available quantity lower than zero.

How to know what are the missing items in 'Collect Files' ?

I used 'Collect Files' to gather my medias for my project, but it's giving me this error in log:
Number of missing items: 1
This project is pretty huge so how can I find out which items is missing ?
I don't see any offline layers in my sequences...
Thank you.

Do you have a file that is bigger than 2gb in size ? I know that on some cases Collect file won't move file with size over 2gb (if i'm correct, not sure about this).
If you are on CS4, open you collected file project and type "missing" in the search text field of the project panel, and AE will show you all the missing files.
You can also have a look at the log file created when you collected the file to see wat file is missing.
Hope that helps.

Why are missing items when import pst files to Outlook 2011 for mac?

Hello.
After installing Office 2011 for Mac I configured Outlook and it was allright.
But when I tried to import a pst file from the old laptop who has Office 2007, I found that in the Outlook 2011 Inbox I have only ~60% items comparative with the Outlook 2007 Inbox.
From Microsoft Office forums I've got an answer that there are indeed some reports with missing items when import pst in Outlook 2011 but the solution they gave me (create folders in Inbox before import) doesn't work.
Do you know something about this kind of problems?
Is it a feature in Outlook 2011 which automaticaly select/delete/combine items based on the similarity between them or based something else?
Have you an ideea how to finally use this macbook and in the same time all my old emails?
Thanks.

Hi Steve,
Thanks for this-yes, eventually, I do send/receive fine, once I've poppedd my passwords in.
I think you are right in that BT seem to be having unique server/login issues...at least this is what I've read elsewhere too.
Iroonically, this AM I opened my new Mac and have *not* been asked for passwords so perhaps the changes I made in the settings yesterday (keychain reset in Mac) and also changing it from smtp.....to mail.btinternet.com solved the issue...who knows? All I know is this last week I've nearly lost the will to live on more than one occasion, from the transition from PC Windows Live Mail to Outlook for Mac.

Missing Items List

In purchasing reports window for the open items list reports from the dropdown menu if you the select the "missing items " you get a report for the items which are in negative stock values.What does field consignment mean in this report?
Regards
Louis

Hi Buddy,
In the Open Items List (Reports -> Sales and Purchasing -> Open items
List),items appear in 'Missing Items List' when the 'Available' stock is
negative. The available stock is displayed in the Item Master Data ->
Stock tab.
When the 'Available' figure (Inventory - Item Master Data - Stock Tab)
falls below zero the item is visible in the missing items.
The consignment field is visible in the Item Master Data - Stock tab.
If it is not visible go to Tools - Form Settings and select the
'Visible' check box for the field.) If this field has a value then it
will be visible when the item appears in the Open Items List.
The figure which appears in the 'Consignment' column is a calculation
field, based on the sum of all open deliveries(where the delivery
increases the negative 'Available' stock)/Released Production orders -
open returns.
Hope the above information can be useful for you.
Best Regards,
Tim

Missing Items list returns wrong results

Hi All,
Have an issue whereby items are included on the missing items list report which show no consignment value and a positive available value...
I.e. Item A is showing on the list with:
In stock 30
Committed 1
Available 29
Anyone ever come across this?
Many Thanks,
Matt

Hi Guys,
I think the issue is more to do with the fact that the report is picking the items up even though it has a positive value in the available field, the consignment field seems to be correct.
This is happening for a lot of items, even for items where there is no data in either the consignment or available fields.
The version is 8.8 PL14.
Thanks,
Matt

Missing items in the IDoc for the delivery

Hi to all,
Sorry if not posting in the right forum.
In my customer's scenario, an IDoc is created against a delivery (via the delivery output), and sent via ALE to a distant warehouse system, for picking and GI posting (basic type SHPMNT03).
For some times, the IDoc created against deliveries including BOMs is missing the main item of the BOM (though the BOM main item is in the delivery).
Consequently, the integration in the distant system is failing, because the higher-level item referenced in the BOM sub-items is missing.
Surprisingly, re-triggering the delivery output does re-generate a complete IDoc, where the segment for the main item is back.
I looked almost everywhere, did many searches in OSS (on SHPMNT03, on HIPOS, on E1ELD24 - segment name in the IDoc -, on "Missing items in the IDoc for the delivery", etc...), I even simply googled the web, but I can't even figure out what is the cause for this (I imagined it could be caused by a missing commit in the program generating the IDoc, but don't know whether this make sense).
Any help would be highly appreciated.
Thanks in advance and best regards
Yan
Edited by: Yan Loiseau on Jul 8, 2010 12:52 PM
Edited by: Yan Loiseau on Jul 8, 2010 12:56 PM

Hello Yan
Jelena is right, you are better off taking it up with SAP. I also did not find any relevant OSS notes.
However the issue, according to my reading, is in the following areas:
1) LV56KF05: INCLUDE LV56KF62 . " FILL_E1EDL24"
This fills the EIEDL24 segment, may be the main item is filled initially and overwritten later.
2) Function Module: IDOC_OUTPUT_DELVRY
You can look at the following OSS notes (though not fully relevant) for some clues:
810981 - Reference data missing in DESADV IDoc from decentralized WMS
537470 - BOM + batch split in decentralized WMS, confirmation fails
752921 - VL563: Higher-level item does not exist
705086 - Higher-level item does not refer to existing item
Hope this helps. Good luck.

Missing Item Category Group in Sales Area data

Hi,
Can you please help us. We cannot load some materials to our product catalog because of missing item category group in our sales area in crm. Can you please let us know why this happens? I know that this can be fix by doing request load but what might be the possible rootcause of this problem? Let us know if we need to check something. Thanks!
Regards,
Mike

Any such missing configuration can not be dealt with technical manipulations. The easiest and right way is to (middleware) download or maintain all the required configuration settings.
The possible root cause? Most probably the configuration in the source system (ECC) has changed and not all of them are in place in the CRM system. Check and run the delta / full downloads as appropriate.

WAD: Missing Items in 0ADHOC Web Template

In the Web Application Designer, when I open the 0ADHOC Web Template, it comes up with several missing items. Specifically, SAP_BW_TEXT_!llD_119, SAP_BW_TEXT_!llD_129, SAP_BW_TEXT_!llD_132.
Also, for some Web Items the image is missing. The web items are the Query View Selection, Broadcaster, Data Provider. There is a little red 'x' mark in the left hand side and the words "Image is missing"
Has anyone encountered this? If so could you pelase help me.
Thanks.

hi,
I have just made a test:
I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
so those texts are exist as well
Only question is: does those texts numbers same for all systems?
Regards,
Andrzej

Find Missing Items - export list to spreadsheet?

I inherited a LabVIEW project that has a whole lot of missing items (vis, controls, lvlibs, etc...). From the project I can display a list of the missing items, but I cannot figure out how to export the list to something useful for sorting and sharing. Right clicking or trying to select multiple items in the list doesn't work. Is there a way to do this? I have attached a printscreen of the missing items window in case it helps...
Thanks.
Attachments:
missing_items.png ‏182 KB

cycleguy wrote:
I didn't know you could potentially extract the VIs from an EXE - I'll have to check that out sometime.
Yes you generally can do this, but the technique changes with some versions of LabVIEW because it can be seen as a security risk. But realistically it is more like extracting part of a binary application. After extraction the VI has no documentation, no icon, and just works like a DLL with some inputs and you get some outputs with no way of seeing the code that goes on inside it. It also cannot be recompiled for other versions of LabVIEW so again it isn't all that useful.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Missing Item or Condition Error When opening up the Worksheet

I Removed four columns from the Business Area and also removed the selected items from the Worksheet
When I try opening up my discoverer report it gives error that
" Missing Item or condition" - " Do you want to substitute another item, ignore this message or cancel opening this workbook"
Am i missing something?

If one of the removed columns is used in a condition or calculation, this can occur. It might also happen if there are parameters based on the removed column. Removing columns from a worksheet will not remove them from conditions and calculations.
Ignore the message, then look a bit deeper to see where the deleted item has been used.

Help on Indent Sales Order Creation - Missing Items in Purchase Requisition

Hi Experts,
We have Indent Sales setup where when we create Indent Sales Orders it will also create Purchase Requisitions. But we have encountered a lot of of missing items in the Purchase Requisition that are in Indent Sales. Have you encountered this kind of behavior? What are the usual suspects (configuration-wise) for this scenario?
Thanks for your Help!

hi,
please check the SCHEDULE LINES for those PR is getting generated and also for not generating.
PLEASE CHECK THE SCHEDULE LINE CATEGORY CONTROL FEATURES on the same
hope this clears your issue
balajia

Missing item assignment for "Minority interest in the balance sheet"

Dear Experts,
We unable to perform "Consolidation of investment" and "Validation of Consolidation data" due to our 2 newly created ECCS Accounts not properly assigned. Can any experts guide me how to mapped it? Your fast action is very much appreciated.
Regards/Lisa

Dear Dan Sullivan,
I have created 2 news ECCS Accounts named as SHARE CAPITAL & SHARE PREMIUM. And i do not know how to eliminate these 2 new ECCS accounts with INVESTMENT IN SUBSIDIARY COMPANIES.
When we performing CONSOLIDATION OF INVESTMENT, the error message showed "Missing Item assignment for Minority Interest in the Balance Sheet" and "No Items are assigned to the items (Newly created ECCS Account)".
Further when we run VALIDATION OF TOTALS DATA, the error message showed "Total Assets is not equal to Total Liabilities + Equity" in Step 002.

Missing items in mailbox

Similar Messages

Maybe you are looking for