Missing Part Info system

Dear friends
I tried missing order infosystem using Tcode CO24.. 
Following message is coming  "Missing part information system
cannot be used start report PPCOXPR1"
what are the possible reasons.. what i have to activate..
regards,
srihari.,

Hi,
Start the report PPCOXPR1 with the T.code SE38 or SA38.
This is required for the first time..
Start this and revert for further discussion..
Do not do this on your Productive system..
First check with your Test System..
Regards,
Siva

Similar Messages

  • CO24 missing parts info

    Hi Gurus,
    Is component ATP info in CO02 consisitent with missing parts info in CO24?
    An order in status created but not released is ATP OK using CO02, but is reported as Parts Missing in CO24, what is the reason behind?
    Thanks,
    Dawson

    Hi,
               Check rule used for Availablity check in Order is diffrent from  Missing Part List .
    Missing Part List will use check rule from Plant Parameter (OPPQ) perhaps Order will use Check control (OPJK)
    Use same  Check rule for  both of them.
    Regards,
    Velmurugan S

  • Missing Part Info Sys for WBS element wise

    Hello Experts,
    How can i found missing list in details by giving input WBS element instead of any Material in CO24?
    or please suggest me any other way to find the list WBS elementwise.
    Thanks with regards.
    Prashant

    Hi
    In CO24 selection from reservations enter plant and WBS elements and execute the report.
    Select the Layout 000000000001 for material View
    Thanks
    S.Murali
    Edited by: S. Murali on Jul 13, 2009 4:33 PM

  • Overview Missing Parts

    Hi All,
    In a production order there is an Overview for missing parts.  It has information like committed quantity and committed date.  We are looking for a standard SAP report that would give us this information by production order and material instead of having to look at each production order individually.  Although we are not new to SAP, the PP and manfacturing part of SAP is new to us.  Any help would be appreciated.  We are familiar with transactions like COOIS, ect.  But when getting into the detail of the Production orders the reports are more scarce.
    Thanks,
    Mark

    Dear,
    In COOIS report you can filter your report with system status "MSPT". It will give you all list of material with system status "MSPT". Also you can use report CO24 which is "missing part info system"
    Hope it helps you.
    Regards,
    Alok Tiwari

  • How to find Missing Parts for a particular Process Order?

    Hi,
    How to find Missing Parts  for a particular Process Order ?
    Is there any function module or Table ??
    Thnx in Advance.

    Hi prince roy
    you can use the T-code = <b>CO24 - Missing Parts Info System</b>
    if helpful PLEASE REWARD YOUR POINTS
    thanks
    chakri

  • Availbility -  Missing Parts - Function Module / Utility

    Hello,
    I am wondering if we have any standard SAP Functionality i.e a Function Module / Other where we can pass a production order # as an input and the result gives the list of all Missing Parts for that Production Order.
    Appreciate any kind of inputs.
    Best Regards,
    Bharat.

    Hi Bharat,
    You can use sap std report or table to get list of missing parts, i dont think sap have function module on this requirement
    STD Report
    CO24 - Missing Parts Info System
    Table
    RESB - Reservation/dependent requirements
    Regards,
    Sankaran

  • Missing Parts List While creating Prd. Order

    Hi Friends,
    My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving  Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
    To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
    But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
    I Tried To Get This From the Following Method
    Checked For Define checking control In OPJK.
    Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
    a) Removed tick mark in No Availability check.
    b) Type of component check Given as - ATP check.
    c) Material release - 1. User decides on release if parts are missing.
    d) PP Checking rule (Which Is same As with plant parameter OPPQ)
    e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
    Then Assigned the availability checking group at Mrp View of Header material.
    In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
    *Please Suggestu2026u2026u2026u2026*
    hari

    Hi,
    Please check same checking rule use in Material master and with order type and plant?
    Check the cheking group in material master MRP3 view for all material.
    Go to Transection OPJJ - Maintain scope of check,
    Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
    (1). CO24- Missing Parts Information System
    Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
    (2). COOIS : Production Order Information System
    Under this transaction you need to Select in List option as Components and then go on Selection Tab.
    For collective availability check use
    COHV - Excute the roport w ith collective avaliabilty check.
    COMAC.
    Hope this help.
    Regards,
    R.Brahmankar

  • Missing part check at goods receipt or transfer posting

    How Missing part check at goods receipt or transfer posting is different from availabilty check in production order.??
    In which conditions we would use Missing part check at goods receipt or transfer posting ??
    Is it possible for same component to behave differently in Missing part check at goods receipt or transfer posting or availabilty check in production order ?

    missing parts check is possible at the time of a goods receipt, other receipt, or transfer posting.
    if the missing parts check function is active in the plant, the system checks whether the material posted as a receipt is a missing part.
    if it is a missing part, the system issues a warning message and sends an e-mail to the MRP controller responsible in the plant. assigning the missing part to a particular goods recipient takes place with the missing part processing in the application component Warehouse Management
    please also check here:
    http://help.sap.com/saphelp_47x200/helpdata/en/41/191fdb45fd11d188ff0000e8322f96/frameset.htm

  • Sales Order no in CO24 missing parts list

    Missing parts CO24.
    I am having trouble bringing the Sales Order field populated into the missing parts information system.
    It seems that when RESB is populated with the sales order it brought through to the report but I have some Assembly Orders (82) that have a Sales Order but this is blank in the missing parts and therefore blank in RESB u2013 why would this be blank in RESB?
    This is extremely frustrating as the users are asking me why have a Sales Order field that will not populate?
    Could someone explain the logic of what conditions there are for the Sales Order number to appear in CO24 ?

    Hi,
    In case of make-to-order scenario, the components are not managed on the sales order special stock, since the field special stock for the components is empty.
    Therefore, the sales order number is not copied to the reservation and it is not available on CO24.
    If you would like to have this field displayed in CO24, you should manage the components on the individual sales order stock, instead of using collective requirements.
    I hope this helps.
    Regards,
    Marcelo

  • What is a missing part ?

    Hi ,
            I am new to material management . As i go through Inventory management i came across Missing part check . But i dont know what is a missing part . Through previous forum posting and help docs . i am not able to under stand Missing part . So i request you to help me in understanding the concept .
    with regards,
    M.Sreeram .

    Dear Sreeram,
    1.In my understanding Missing parts list is related to a production order in the case of Discrete manufacturing and Planned
    order in the case of REM scenario.
    2.Before releasing a production order generally a component availability check will be performed and if there is any deficit of
    component at that particular storage location level depending upon the settings.
    3.T code CO24 is used for finding out the missing parts list.
    4. You can use the missing parts information system to display the missing parts list for a selection of materials, or for all
    materials. You can also restrict your selection of missing parts according to a specific plant, MRP controller or requirements
    date.
    5. In the missing parts overview you can
    edit missing parts data (for example, by changing the requirements quantity or issue storage location)
    check the availability of individual components
    filter / sort components
    The missing parts overview always displays the results of the last availability check carried out in the order, regardless of
    whether you have since exited the order.
    6.In the missing parts list you can
    display the missing parts of all orders which have been checked (for collective orders)
    check the availability of individual components
    filter / sort components
    print the missing parts
    vary the field selection
    The missing parts list is not saved if you exit order processing.
    Also refer this link to exlpore more,
    http://help.sap.com/saphelperp60_sp/helpdata/en/a5/63198843a211d189410000e829fbbd/frameset.htm_
    Regards
    Mangalraj.S

  • "Product info programmed into the system board is missing or invalid system board:

    Product info programmed into the system board is missing or invalid system board:
    OOA product name,
    OOA serial #,
    OOA product #,
    OOA system board ct#
    I get this message every time I start up suddenly. What does it mean and how do I fix It? I just bought this laptop from Staples about 4 months ago!!!
    This question was solved.
    View Solution.

    It is very important that you post the product name or product number of your notebook and the version of the installed BIOS here in your thread.  
    How to identify your notebook.
    Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name. Please post one or both of them (with all alphanumeric characters here). 
    It also helps if you post the country of purchase
    I will pass that information to an internal HP contact as soon as you post it to see if we can get that resolved for you.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Message for Missing Parts  While Creating Order

    Dear Friends,
    While Creating & Saving The Production Order System Is Not Supporting In Giving A Warning Massage On Missing Parts In spite Of Deficit In Storage Location For Materials.
    The Clint Requires A Warning Massage In Case Of Materials Shortage In SL
    I Tried To Get This From the Following Method
    Checked For Define checking control In OPJK.
    Selected  plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
    a)     Removed tick mark in No Availability check.
    b)     Type of component check Given as - ATP check.
    c)      Material release - 1. User decides on release if parts are missing.
    d)     PP  Checking rule (Which Is same As with plant parameter OPPQ)
    e)     In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
    Then Assigned the availability checking group at Mrp View of Header material.
    In spite Of All These Settings Still At The Time Of Order Release/Save  A  Warning Massage Or A Informative Massage Is Not Appearing
    Please Suggestu2026u2026u2026u2026
    Hari

    Dear Friends,
    I Did The Following Settings
    A) Define Checking control       02               Individual Req
                        Total Sales          Single Record
                        Total Div Rec               Single Record
    B)Define Checking Rule     PP  Check Rule
    C)Define Scope Of Check     Availability Check          02 Ind Req
                        Checking Rule               PP Check Rule
              Stock
                   Include Safety stock
                   Stock In Transfer
                   Incl Quanty Insp Stock
    And When No tick Mark Is Applied  In NO Stor Loc Inspectn
    Not Used Checking Group "KP" In components material master.
    After  Making All This Settings Also Before  Order ReleaseWhen Pressed u201CMaterial Availability Checku201D
    The System Is Showing  All Materials Available  In Spite Of Deficit In Storage Location
    Suggestu2026u2026

  • Prevent creation of production order in case of missing parts

    Hi,
    Even in OPJH I have maintained no creation of order in case of missing parts, when i create a production order from planned order and I know the Bom components are not avialable in stock then also system allows to create. Pls guide on how to pevent creation of order.
    Regards.

    Dear,
    If my understanding is correct then the settings in OPJK for business function 1 - availability check during order creation even if
    the value is set as 3 for collective conversion,this works during partial conversion of planned order into production/process
    order or during collective conversion of planned orders into production orders.
    But however the setting in OPJK for business functionality 2 - during order release checks and if
    there are any missing parts means the order cant be released for the value 3 set for release material.
    Just check this link also,
    Re: Avalability Check
    Regards
    Mangalraj.S

  • Missing part message in MIGO

    Hello,
    we have activated the missing part message in MIGO using transaction OMBC.
    All is working fine and we receive an notification in business workplace.
    The problem is that only one person receives the mail and we want that all MRP controllers get an notification.
    In transaction OMBC under "Mail user" we can only maintain one "Recipient Name".
    But what is the meaning of "Recipient for mail to MRP controller"? Can we here use position to maintain all controolers in the organization model of the PD (PD-ORG)?
    Thanks
    Arnfried

    Hi There
    Specification of the mail recipient- System sends the missing part message to the material planner(MRP Controller) responsible for the material,, in order for this to happen , a user ID must be assigned to the material planner,,
    Specification of missing part expediter- if no user ID is assigned to the responsible material planner, the message is sent to the central missing part expediter responsible for the plant. This person is defined per plant,,
    So this is what happening in your place,,  maintain the user ID to the MRP controller,, then it will work fine,,
    Maintain the below settings--
    SPRO-IMG-Materials Management-Consumption-Based Planning-Master Data-Define MRP Controllers-Double click on MRP controllers-Maintain the field Recipient Name (User ID) then system will trigger the mail to MRP controllers...
    Hope it helps
    Thanks
    Senthil

  • Problem of Missing parts during the Process Order release

    Hi
    For a Make to Order strategy, I have run MRP for a sales order which resulted in planned order for the material. But when I try to convert the Planned Order to Process Order, I am getting error Parts are missing during the availabilty check even though the components are available in the stock.
    But when I create a Process Order manually, I am not facing the problem of missing parts as stock for components are available in stock.
    Please advice why I am facing the problem with Planned Orders which are created via MRP.
    Regards
    Brijesh

    Dear all,
    If we set the Individual requirement (1) in MRP4 view of the material master for the component, the system will not consider the plant stock and it will give the message like Parts are missing during the Process Order process even though the plant stock is exists for the component.
    So I would like to where in customization you define this?
    --> To not consider the plant stock if individual req is set (1)
    --> To consider the plant stock if collective req is set (2)
    Kindly advice,
    Regards,
    Brijesh

Maybe you are looking for