Missing Workbook in Production

Hello Friends,
I am getting below error while opening a report.
"Workbook doesnot exist in the document store"
Looks like workbook is lost in production.
Can someone please tell me, how to restore this back? This is a production report and need to be replaced as soon as possible.
Appreciate your help and points will be assigned.
Thanks
Priya

Hi Priya,
There is no Option to Restore the Deleted workbook.
But You Can check the Log by Executing the ABAP Program RRMX_WORKBOOKS_GARBAGE_COLLECT in SE38.Here you can find the ID of your work book which was Deleted.There by you can Transport the workbook from Development Server.
or Once you get the workbook ID that was Deleted Go to Try to fin the Request that has this workbook Just Re-Import that Request.
Thanks,
-VIjay
Message was edited by:
Vijay

Similar Messages

Standard Report for missing parts at production order operation level?

Hi PP Gurus,
            We have standard report for missing parts at production orders level.
For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
Please help.
Thanks,
Reddy.

Hi Arvind,
      Thanks for for your response.
1. List: Components, Layout: Standard layout          set the Missing part
       It shows the component requirement/withdrawn quantity for each operation of production order. It is not showing the commit quantity.
2. List: Components, Layout: Pick list          set the Missing part
       It shows the component requirement/withdrawn quantity for each production order.
3. List: Components, Layout: Missing Parts List-Material View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
4. List: Components, Layout: Missing Parts List-Order View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
      We are unable to get the solution from all these 1 to 4 reports from COOIS.
Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
If avilable, what is the procedure to be followed?
Thanks,
Reddy.

Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches

Once I connected my new server to my farm's config db, it returned all of the following missing locally. I stripped out any redundancies and Headings, and I'm left with 43. I'm looking for a efficient strategy. Should I start with the lowest version number
and work my way up? Current DB version is 14.0.7015.1000. IIRC, SP2 is cumulative, so can I ignore the first two (SP1 and Hotfix), install SP2, and then the Language packs and etc on top?
Sorted by version:
Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000)
Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition (14.0.7015.1000)
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition (14.0.7015.1000)
Microsoft Office Server Proof (English) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (French) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (Russian) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (Spanish) 2010 (14.0.7015.1000)
Microsoft SharePoint Portal (14.0.7015.1000)
Microsoft User Profiles (14.0.7015.1000)
Microsoft SharePoint Portal English Language Pack (14.0.7015.1000)
Microsoft Shared Components (14.0.7015.1000)
Microsoft Shared Coms English Language Pack (14.0.7015.1000)
Microsoft Slide Library (14.0.7015.1000)
Microsoft InfoPath Forms Services (14.0.7015.1000)
Microsoft InfoPath Form Services English Language Pack (14.0.7015.1000)
Microsoft Word Server (14.0.7015.1000)
Microsoft Word Server English Language Pack (14.0.7015.1000)
PerformancePoint Services for SharePoint (14.0.7015.1000)
PerformancePoint Services in SharePoint 1033 Language Pack (14.0.7015.1000)
Microsoft Visio Services English Language Pack (14.0.7015.1000)
Microsoft Visio Services Web Front End Components (14.0.7015.1000)
Microsoft Excel Services Components (14.0.7015.1000)
Microsoft Document Lifecycle Components (14.0.7015.1000)
Microsoft Excel Services English Language Pack (14.0.7015.1000)
Microsoft Search Server 2010 Core (14.0.7015.1000)
Microsoft Search Server 2010 English Language Pack (14.0.7015.1000)
Microsoft Document Lifecycle Components English Language Pack (14.0.7015.1000)
Microsoft Slide Library English Language Pack (14.0.7015.1000)
Microsoft SharePoint Server 2010 (14.0.7015.1000)
Microsoft Access Services Server (14.0.7015.1000)
Microsoft Access Services English Language Pack (14.0.7015.1000)
Microsoft Web Analytics Web Front End Components (14.0.7015.1000)
Microsoft Web Analytics English Language Pack (14.0.7015.1000)
Microsoft Excel Mobile Viewer Components (14.0.7015.1000)
Recommendations?
Thanks,
Scott

Thanks guys. I was able to get through all of the patches except for
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - English missing locally
Language Pack for SharePoint, Project Server and Office Web Apps 2010 -
Spanish/Español missing locally
This was my process:
Config Wizard:
Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches.
SKIP installing the following two, as SP2 is cumulative
Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000) (officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe)
Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe
install oslpksp2010-kb2687462-fullfile-x64-en-us.exe
Got "There are no products affected by this package installed on this system."
SO!
Uninstalled Sharepoint 2010 Server
WIll try to install again, without skipping #2, and reorder installation of oslpksp2010-kb2687462-fullfile-x64-en-us.exe
Retry (the long way):
Run SharePointServer.exe, get Missing Locally...
Install oslpksp2010-kb2687462-fullfile-x64-en-us.exe SUCCESSFUL
Install officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe SUCCESSFUL
Reboot
Install oserversp2010-kb2687453-fullfile-x64-en-us.exe SUCCESSFUL
Rerun Config
STILL MISSING
Download oslpksp2010-kb2687462-fullfile-x64-es-es.exe, run, "there are no products affected..."
Uninstall.
Re-retried, only got through the first couple:
Run SharePointServer.exe, get Missing Locally...
Install SP1 officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe, SUCCESSFUL
Install English Lang Pack oslpksp2010-kb2687462-fullfile-x64-en-us.exe, "There are no products affected by this package installed on this system."
Install Spanish Lang Pack oslpksp2010-kb2687462-fullfile-x64-es-es.exe,
Install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe, run Config Wizard
I'm now downloading 462150_intl_x64_zip.exe, going to try and install it as step three.
Any suggestions greatly appreciated.
Thanks,
Scott

Could not Locate Workbook in Production system ?

Hi ,
Can any one explain me the procedure to transport workbook from Dev to Prod.
I have recently transported some queries and workbook . Transportation went fine , I am able to see the queries in Production system . But i failed to locate all my workbooks in Production system . I have searched for the work books with Workbook ID and with description but it is of no use. I can see my transported work book in Meta data Repository.
Your help is appreciated .
Thanks in Advance

Hi Rob,
i am a bit clear now.
I have 30 workbooks in production system , they are not in dev , I mean 30 workbooks are directly created and assigned in production system.
Now i have created 10 new workbooks in development. My devlopment system has only 10 new workbooks.
as per my understanding from your reply is ' If i transport the role i can only have 10 newly created workbooks in production and loose 30 workbooks . Which i don't want .
i want these 10 workbooks to transport in to production system without effecting existing 30 workbooks in production system

Miss alignment of Product Group types ato subsequent product group number..

There is a miss-alignment of Product Group type to subsequent product group number. Incorrect Product Group Number being assigned to the incorrect Product type, which ultimately has resulted in line items not being available in the Procurement Catalogue.

Hi Atul,
We are using SRM server 5.5 with as support Pack 6 and CCM with a release 200_700 with a support pack SAPK-27006INCCM.
The issue is in Catalogues. Some of the items in the catalogs are missing.
Awaiting your feedback.
Best Regards,
Mahesh. J

Create workbook in Production?

I'm getting a "Document Store access caused errors in the SAP System" error when trying to create a workbook in production. Can someone help with this?

Hi Angie,
In your system > RSA1 > Transport Settings > Object Changeability, check what is maintained for XLWB (Workbook) . Set this to Everything Changeable, save , log out and try again.
Hope this helps...

Missing workbooks

Howdy Gurus,
We have some workbooks that appear to have gone missing. These comprise about 4 workbooks from two totally unrelated infocubes that were working fine on Friday, and on Monday we cannot find them if we search for them in BEx. People that had run them in the past and had them in their BEx History get the following error when they try to run them from their History:
document store operation failed due to missing authorizations
Heres the troubleshooting Ive done so far:
I dont believe its an authorization issue because the user that got this error has the SAP_All profile, and when I look in SU53 for this user there are no authorization errors. People could run these workbooks fine a few days ago, and no changes were done to the roles since then.
I dont believe the workbooks have been deleted because we can find them if we look in the Metadata Repository, and one has a last changed date of a month ago.
These workbooks have been under development for the past couple of months directly in our production system, so there should be no transport issues.
Were running BW 3.5 on Oracle 10g.
Ive never run across this before, and Im not sure where I should look next. Can anybody point me in the right direction?
Thank you very much!

Hi,
when you did not transport any workbooks or queries how can you find them in prod.
If that is not the case check....
RSRWORKBOOK(table)- if you have workbook ID
RRMX_WORKBOOK_LIST_GET -function module
hope this helps you.....
Message was edited by: AVR - IGA

I miss my apple products

Hello, I've been an Apple fan since about 2010 when I picked up my 3GS on a 2 year contract. It was painful, because back then I didn't realize Apple brought out new phones every year, so a couple of months after I got my 3GS the 4 came out. I stuck the 2 years out though just in time for the iPhone 5. After all that waiting I'm not going to lie I was dissapointed but it would have been a huge upgrade from the 3GS without doubt. However, my only niggle with Apple is the cost. £525! I thought I'd take a gamble and buy an Android device for £200 cheaper.
As time goes on though (had HTC One X for about 2 months now) I'm kind of missing my iPhone and the capabilities it had. I sold my iPad on eBay last week because now that I don't have an iPhone I thought I'd get a bit of money back and sell the iPad.
I have to admit though, I miss it. The UI, iTunes, photo stream, iCloud etc. It's all just SO easy and friendly to use. I loved it. The only thing that gets me is the cost. I would absolutley love to have a Macbook but I just don't need it that much to spend £1000 atleast on it. Otherwise I'd have borh air and a pro!
Anyways, not so much a question... just needed to get it off my chest. Please don't flame me for trying Android. It was my first time and thought I'd see what I prefer and well, there you have it.

Sorry to see you go…
My story is slightly different.
Before I had 5 Android phones in a row (all HTCs). My firs Apple product was iPod Touch, so I could compare two different OS. Multiple Android failures made me mad (software related mainly that usually started after six months or so of using it). However, I had no complains to my iPod. Then I bought iPods to all my family members. Later I purchased Macbook Pro, few months later Mac Pro, then Airport Express and Extreme, then Macbook Pro to my wife… I not only get rid of Android, but I eliminated Windows from my workflow … and my life got bright colours, smile on my face and no problems whatsoever…

Elitepad 900 tablet shows missing serial and product info when booting

Hi,
i recently updated my tablet from windows 8 to windows 8.1 and then updated bios. after this upgrade on boot screen it shows missing aerial number and product info. please note that i have not changed the board or any other hardware. please help me to resolve this.
regards
Raees

Hello Malik-Raees,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP.

Autmatic upadate of status of missing parts in production order

Dear Gurus,
In production order to check missing parts status we have to click on push button for check for material availability. Is there any way available to update the latest material position in production order automatically?
Regards,
SAP CONS

Dear ,
This can be set at Order Control in OPJK .
You can goto OPJK-Select order type , plant and indicator 1(Availablity Check ) -Here Do not mark No Check check box and Mark material availablity check while saving .Keep the Collective Conversion indicator as 1-User decides based on if material is missing parts .
Regards
JH

Scope of Check Variation in Missing Part list Production Order

Hi,
I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
Why this difference is coming,can any body tell the possible causes.
Cheers,
Kumar.S

>
KUMAR.S. wrote:
> Hi,
>
> I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
>
> Why this difference is coming,can any body tell the possible causes.
>
> Cheers,
> Kumar.S
Kumar,
Its simple for creation and release of Production order different checking rule is used(This must be intentional). You check this in OPJK transaction, check for your order type / Plant combination for Business function 1(Create) the checking rule assigned would be ZP, whereas for the same order type / Plant combination for Business function 2(Release) the checking rule would be PP.
If you want the same, you can change it here. But I assume there must have been a purpose for this custom checking rule creation. You can find the scope of check difference between these 2 combinations in transaction OPJJ.
Regards,
Prasobh

Missing parts and production storage location

Can the production storage location in the material master for a component on a BOM be set to blank to pull in all inventory in the plant when calculating missing parts in a production order? I am finding that the blank production storage location is NOT pulling in all inventory in all storage locations; I honestly think that is how it should work but would like to see what others think or have run into. Thank you very much!

Hi Judith,
This can be done by system to carried out Avilability check plant level instead of storage location level. For that plz do the settings as suggested by our member.
Check the "No.Stor.Loc.Insp" in OPJJ for checking group and Checking rule combination and assign the same checking group to material at MRP view.
Donot Assign storage location for components in material Master and BOM item.
Please try anf comeback
regards
pradeep

Missing Database Index Production Server

Hi,
We are getting Missing Database Index ZPP_EXCAVAT_DET5~0 in production server. For missing database index we are getting in se14 it is showing Exists in the database.While we are using t -code in Db02 there we are getting
ZPP_EXCAVAT_DET5~0 u2013 missing database index.
Had Followd as per note 1248769 but not working Please Suggest
Regards
Priyanka M Jain.

Dear Vinod,
Tried Following Steps as
. Call transaction SE14.
. Enter the name of the table and choose "Edit".
. Choose "Indexes".
. Select the index and choose "Choose (F2)".
. If you choose "Activate and adjust", the system creates the index again and it is consistent.
. Check the object log of this activation.
. If an error occurs, eliminate the cause and reactivate the index.
But could not create the index
Following Error Occured
SQL STATEMENT COULD NOT BE EXECUTED
INDEX COULD NOT BE CREATED COMPLETELY IN THE DATABASE
INDEX ZPP_EXCAVET_DET5-0 Could NOT BE CREATED

Missing workbook text elements

Hello,
After upgrading to BI7 we are experiencing an issue with the missing text elements. We use workbooks with a sheet to receive the query and then a macro to reformat the query to user display form. The query sheet generally has a text element area and then a data area. When building the workbook we select the text element object and turn on all the text elements, this makes debugging easier and sometimes the text elements are used in the end report. Randomly after saving the workbook the text elements are turned off and on subsequent executions they are not displayed. The workbook then requires modifications to turn on the text elements, save the workbook and then transport.
Any thoughts would be appreciated.
Thanks,
Rick

Hello,
After some testing of the fixes that were applied we are still experiencing the issue with disappearing text elements.
Any additional information or recommendations would be appreciated.
Thanks,
Rick

Cn=IAS branch is missing under cn=Products in OID

In our Application Server (10g, 9.0.4) Infrastructure installation the whole branch of OID, which lists (among other things) the OID-registered database schemas, is missing. That is, it doesn't show up in Directory Manager under cn=OracleContext, cn=Products.
Besides, on the Enterprise Manager page where you can change infrastructure schema passwords, too little schemas are listed. Only about five SSO schemas appear there, and no OID or Portal schemas do.
The overall setup -- tow mid-tiers and an infrastructure -- appears to be working.
What am I doing wrong?

Here is what I have in the search base when I view it in OIDDAS under Directory configuration:
User Search Base:     cn=users, dc=mycompany,dc=com
User Creation Base:   cn=Users,dc=mycompany,dc=com
Group Search Base:    cn=Groups, dc=mycompany,dc=com
Group Creation Base: cn=Groups,dc=mycompany,dc=comHere is the searchfilter I am using for synchronization:
searchfilter=(|(objectclass=group)(objectclass=organizationalunit)(&(objectclass=user)(!(objectclass=computer))))
Any help is really appreciated as I am kind of stuck and have exhausted all my efforts so please can someone provide some help.
Thanks.
Message was edited by:
WhiteSox

Missing Workbook in Production

Similar Messages

Maybe you are looking for