MRP 2 view - service level field

Hello colleagues.
Can anybody explain me what's the usage of the field "service level (%)" in the MRP 2 view of the material master ?
The SAP help does not help that much ...
Regards,
Fernando

Dear,
In MRP2 view thers is field service level % where you can define the percentage of present stock will be in safety stock.
hope it will works for u
Service level
Percentage specifying what proportion of the requirement is to be covered by the warehouse stock.
Use
The system uses the service level to calculate the safety stock.
The higher the service level, the higher will be the safety stock calculated by the system to compensate for additional consumption or delays in delivery.
Regards,
Alok Tiwari

Similar Messages

  • Service level field in Shipment

    Dear forum,
    Does anyone know where to configure the service level field (VTTK-BFART) in the shipment?
    I am creating a shipment with transaction VT01n, and want to select an own defined service level (VTTK-BFART) in the header of the shipment. So I need the IMG path to configure the service level, to be able to add own defined values.
    I do not need the instructions in how it is possible to have a default service level suggested by shipment type. That I already know how to do.
    Thanks,
    Ola

    Hi,
    Nope, the service level (VTTK-BFART) is not maintainable via customization. You can understand this when you press F1 and 7th tab { key like}  is disabled.
    But, you can add new entries in development with developer access key going in BFART domain.
    Hope this is helpful for you.
    Hrishi

  • Service Level in the Material Master

    Hi -
    Can the service level field in the material master MRP view be used to drive additional demand independant of safety stock?  Meaning, is there any way I can enter a service level and have it increase demand even if I am not using it to calculate safety stock?
    Thanks

    I do not think this is possible. Service level is usually used for safety stock planning.

  • IO Service Level versus Profit Analysis Simulation Set Service Level Change

    R12 (RAC) Service Level versus Profit Analysis
    Projected Service Level in Analysis workbench shows a strange negative quantity
    when ussing Item Simulation Set in a plan.
    The customer expects that when Service Level is changed in the item
    simulation set, the system should use It.
    But Target Service level still appears negative in the Analysis Workbench
    Test Case:
    Inventory Planner Responsibility.
    Navigation: Inventory Plan > Name.
    Look for an existing inventory Plan. Click on "Plan Options" Button.
    Assign an Item simulation Set.
    Save changes.
    Close the "Plan Options" window.
    From the "Inventory Plan Names" window push the "Launch Plan" Button.
    When plan finished, navigate to: Analysis Workbench
    Look for the plan, and review the showed value in the field projected Service Level.
    They noticed that when they create an Item simulation Set, Original Service Level
    field is not populated and they thought maybe It was part of the problem, so they
    tried adding a value in the Service Level Field of the item simulation set.
    However; it did not work.
    They are expecting that if no change has been made to the service level in the Item simulation set, It should use the service level set in the Service Level set, used in the inventory Plan.

    Hi Bruyneel,
    I've solved the problem. I think while doing kernel or component upgrade SAP clear all configuration that connected from ABAP and JAVA. You can re-config from config tool.
    1. Goto \usr\sap\<SID>\<SIst.Num>\j2ee\configtool and execute go.bat
    2. cluster-data -> global server configuration -> services -> com.sap.security.core.ume.service.
    3. Configure:
    ume.login.guest_user.uniquefields with J2EE_GUEST, and make sure the user is already exist in ABAP
    ume.persistence.data_source_configuration     dataSourceConfiguration_abap.xml
    ume.r3.connection.master.ashost
    ume.r3.connection.master.client
    ume.r3.connection.master.passwd : with SAPJSF user's password
    ume.r3.connection.master.sysnr
    ume.r3.connection.master.user : SAPJSF User
    Refer for this link for help: http://help.sap.com/saphelp_nw04s/helpdata/en/20/361941edd5ef23e10000000a155106/frameset.htm
    Thanks & Best Regards,
    Yan

  • Passing 'Service Level' from Forwarding order to Freight order

    Hi All,
    If I create a Forwarding order with Service Level "XYZ" and create a freight order from it,
    the service level 'XYZ' is not passed on to the Freight order Service Level field.
    Instead of 'XYZ' it is empty.
    When investigated found out that, freight order will take Service Level defined in the corresponding Freight order type.
    In my case, the Service level in Freight order type is left Empty.
    Is there any workaround to bring the Service level from FWO to FO?
    Thanks & Regards,
    Michael.

    Hi Michael,
    It depends how you are creating a FO from forwarding order. Do you have FUs as linkage or you are creating FO directly by using FUBR?
    Thanks & Regards,
    Tarun Kumar

  • Caltyp24_Call Type Real Time All Fields Service Level Today discrepancy

    Hi All,
    During our initial phase of deployment to CUIC reporting tool we want to offer similar features to our team to ensure smoother transition. However, I'm seeing discrepancy in data pulled by two different reporting engines - Webview 7.5 and CUIC 8.x. I have attached the screen shot of both highlighted in red.
    Details:
    CUIC/WebView Report: caltyp24_Call Type Real Time All Fields;
    Version of CUIC: 8.5(4) build 1 (8_5_4_10000_99);
    ICM Version: Release 7.5.1.0, Build 23684;
    Column with Discrepancy: Service level today.
    Any help much appreciated.
    Thanks in advance,
    Ramchand

    Thanks very much for responding so quickly Kartik. The data is pulled from the ServiceLevelToday column in Call_Type_Real_Time table. Here is the query; I have truncated some columns for brevity:
    SELECT Call_Type.EnterpriseName,
    Call_Type_Real_Time.CallTypeID,
    Call_Type_Real_Time.ServiceLevelCallsToday,
    Call_Type_Real_Time.ServiceLevelToday,
    Call_Type_Real_Time.TalkTimeToday,
    Call_Type_Real_Time.ReturnReleaseHalf,
    RouterCallsAbandToAgentTo5 = Call_Type_Real_Time.RouterCallsAbandToAgentTo5,
    RouterCallsAbandToAgentHalf = Call_Type_Real_Time.RouterCallsAbandToAgentHalf,
    CallsAtVRUNow = Call_Type_Real_Time.CallsAtVRUNow,
    CallsAtAgentNow = Call_Type_Real_Time.CallsAtAgentNow
    FROM Call_Type, Call_Type_Real_Time
    where Call_Type.CallTypeID = Call_Type_Real_Time.CallTypeID
    Order BY Call_Type.EnterpriseName, Call_Type_Real_Time.DateTime
    We used the templates through CDN that mimic the real time and historic reports from Web View. This is the only real time report where we noticed the discrepancy in service level today column. We have the Standard CUIC license so I am unable to verify the report definition through CUIC. However, I should assume that both reports are referring to the same columns and tables. Do we have any alternatives? Please suggest…thanks

  • Unified Communications Operations Manager 8.0: How can I get rid of exlamation marks in Service Level View?

    Hi all,
    In Operations Manager I open the Service Level View and there are 3 exclamation marks visible for some devices. I acknowledged all alerts & events and they are already cleared now, but I'd like to know if I can get rid of the exclamation marks in Service Level View too. Is this possible?
    Kind regards,
    Richard
    Message was edited by: Richard Bovens

    Nancy,
    You are God!
    It worked!
    Thanks.
    I have a dumb basic question which is sort of related to your shambles comment, which I don't deny is true.
    I am confused about whether style.css files get affiliated with each separate HTML page or whether there is just one style.css file that is affiliated with all my HTML pages. If they are separate CSS files, how do I separate each style.css file?
    Best, P.

  • Only one Custom field is missed in  Service Level Determination

    Hi
    I have extended Service Request BO with 4 field, one field is ID type and rest of field are Text type.
    in Service Entitlement-> Service Level Determine-> adapt column, "Decision table configuration" under the available column I can see all the extended field( SDK & KUT), but only one extended field(ID type) is missed.
    Could anyone explain how to bring that field there.
    Thanks
    Sunil Maurya

    Hi Bharadwaj,
    Thank you for your inputs. I executed the program but it didn't display the field.
    But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
    Regards
    Kishan

  • UOM service level view

    Hello,
    I had installed Unified Operations Manager 9.1.1 on a customer site.
    the problem is that I cant see the presence cluster & cube router (they are monitored on the system) on the service level view.
    all the other systems are monitored and displayed on the service level view successfully.
    any help ?
    BR,
    Liran.

    I don't think you can change much there.
    You see the map display pane if you have mutiple clusters managed, or the just the cluster if you have only one cluster.
    I'm not 100% sure, but if you have multiple clusters you can do a rightclick on the cluster in the left pane and make it the default view to make it show that cluster by default.
    Cheers,
    Michel

  • Cisco Prime Unified Operations Manager 9.0, "Service Level View" problem.

    Hello to all.
    Hope this mail finds all of you well.
    I have a problem with a CUOM Prime 9.0.
    The customer's infrastracture is a cluster CUCM (VM), 9.1.2.
    The CUCM cluster is up and running and all the cisco devices can be discovered.
    The customer wants to use a Cisco Prime Unified Operations Manager 9.0 in order to monitor all the Cisco devices.
    Also, in the CUOM server have been installed the browser "I.E 8.0" and the browser "Firefox Mozila" (Firefox Setup 10.0.5esr).
    The problem that I faced is that the page "Service Level View" can not be displayed.
    When I try to use the "Internet Explorer" the loading bar is being displayed, but can not be completed.
    When I try to use the "Firefox Mozila" a message is being displayed and prompt me to install the last Flash Player,
    which is already installed.
    Can anybody help me on that  problem?
    Thank you very much in advance.
    Regards,
    Isidoros

    Finally, the solution of the problem was:
    1-stop the daemon manager “net stop crmdmgtd” 
    2- Delete the xml files available under(please take backup from them) :
    CSCOpx\objects\sir\work
    CSCOpx\objects\topo\work
    3-Start the daemon manager  net start crmdmgtd  (wait for 20 minutes until all process are up )

  • Group and Owner fields blank when viewing Service Request results via UWQ

    When looking at a row that represents a service request in either the UWQ or View Service Requests (search form) the group and owner columns are blank only for some of my users.
    If you look at the detail for the SR, there is a owner and group.
    Not sure what the issue is..? Inherited this role.
    -JP

    Which release is this occuring? At the first glance it looks like an issue that cropped up in 11.5.3. and has been fixed since.

  • New lot size in MRP view

    Hi ALL
    Any one can suggest how can we configure a new lot size for  MRP view in ECC.
    regards
    Vikas

    Hello Vikas,
    I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
    Thanks
    Amber

  • MRP view in MM60 list

    Dear pandits,
    I am doing material plant extn. thro lsmw from plant x to plant y.
    Could I fetch following MRP views aprat from  MRP type (appearing already .)
    reorder point,  MINBE
    mrp controller, DISPO
    lot size , DISLS
    maximum stock level MABST
    thanks
    v balajee

    Hi ,
    I think u will not all these fields in MM60 report.
    All these fields u will get in MARC TABLE,go to se16.give MARC table.In the initial screen,go to settings list format- chosse fields-select all the fileds which u want and enter.
    Then in the initial screen,give plant X and execute.
    U can download all these details to excel sheet and can be used for lsmw.

  • Seasons in MRP view

    Hi,
    My customer wants to view MRP in seasons wise. Is that possible in MRP screen?
    Please let me know if any method available in MRP..
    Thanks,
    Rohith

    Hello Vikas,
    I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
    Thanks
    Amber

  • Inactivate material MRP views

    Hello,
    the MRP views for a service material (DIEN) was mistakenly extended and now is causing problems, specifically, SAP is throwing a "no checking group" error for the service material when it tries to run ATP.  There is no checking group field to populate as this is a service material.  Any suggestions?
    Thanks!

    Thanks for the help guys, but......
    1) Setting the MRP type to ND does not resolve the "no checking group" error
    2) There is no availability check field for the material in the MRP view as this is a service material of type DIEN
    3) I would be able to delete and re-create the material, but, since the material type uses internal number assignment, we would end up with a different material number.
    Any other suggestions?  Appreciate the help.....

Maybe you are looking for