Multi-Counter Plan with multiple Equipments

Hello,
We would like to track maintenance costs at Equipment level. In multi-counter maintenance plan, is there a way to enter multiple equipments in one mainteance plan?
Thanks a lot,
Venu

Dear Venu,
In multi counter plan, only one equipment may be assigned, as correctly observed. However, you may assign the same equipment with different task list, depending on the cycle set, so that maint order is generated with required operations applicable for that cycle.
Eg: Cycle set 1   100Hrs/1month
                      2    500Hrs/3Month
                      3    1000Hrs/6 Month
Create task lists as per above cycle sets and for each cycle set assign the same equipment, but with different task lists.
This reduces the number of maintenance plans for a given equipment. This is particularly useful for vehicle management, where the running KM and time are the common counters.
James Prabaharan

Similar Messages

Multi counter plan schduling start date

Dear Experts,
Anyone can clarify the following points to provide proper support to client.
1. we have created multi counter plan with cycle set contains of different target counter readings with logical condition OR.
2. Now users are recording the counters via measuring documents.
3. we are mannually scheduling the above M.Plan. System is deriving the order start date on its own. we want to know the basis behind deriving the order start date? userrs wants starting date on its own, can system will support with ant exit?
4. what is the significance of annual estimate reading in the measuring point? how it help to derive the planned start date of M.Order?
5. users also wants that, system should check measuring documents on its own while creating measuring documents and should result the order if it crosses the limit of the cycle set mentioned in the M.Plan. Is it possible to support the scenario?
Thanks in Advance,
Krishnamurthy

Krishnamurthy,
3) Do a manual call of the Maintenance plan, this would be the easiest way, instead of using exits
4) For performance based MP,The [calculated planned date|http://help.sap.com/erp2005_ehp_04/helpdata/EN/3c/abb1ec413911d1893d0000e8323c4f/frameset.htm] depends on the counter reading at the time of planning, and the estimated annual performance that has been defined for the counter.Hence it is important that you enter measurement readings for the counter,e even-though the reading has not changed.
5) With respect to your last question, That functionality is accomplished through Condition based maintenance functionality. You will have to use the user exit to generate a order when the reading falls outside pre-determined values.
Regards
Narasimhan

Creating multi counter plan using LSMW

Hi,
I am trying to create multi counter plan (transaction IP43) using LSMW. I am using direct input object 0460 for creating it. Object has IBIPMPLA structure as header. How can i pass multi counter data in it ? Problem is line item level values like 'Maintenance cycle' (ZYKL1) are at header level structure IBIPMPLA.
Anyone has cretaed multi counter using this object, please help me with it.
Thanks,

Hi,
creating multi counter plan using LSMW
Try this link,
http://www.sapfans.com/forums/viewtopic.php?f=7&t=217834&p=1059434
It will helps to you.
Regards,
Sekhar

Counting rows with multiple criteria

I know this is a silly beginner question, but is there an easy way to count the number of rows in a table which match criteria based on different columns (sort of a countif with multiple criteria). For example, if Column A in a table has "All, Some, None" responses and Column B has "Main, Off" responses, is there an easy way to count the number of rows in which Column A has All and Column B has Off?

Neondiet wrote:
From an intellectual and philosophical view I agree with you. But from a practical view what I really want to do is just use one application for my spreadsheet tasks, not jump back and forth because one sheet I share with MS Windows users, and another with Numbers users, and another with OS X users who don't have Numbers or Excel but do have NeoOffice. Maybe I have to settle for that though.
Yeah... this kind of situation stinks. Its like needing to writing software that will run on both Macs and PCs.
Anyway, I've followed the advise in this forum and resorted to using a hidden column with concatenated values to solve my own problem, though it does seem like a bit of a hack compared to managing a single formula in a single cell. Horses for courses I suppose.
jaxjason has posted a very elegant pivot table like solution that utilizes this technique. See http://www.numberstemplates.com/forums/showthread.php?t=36
Btw, from what I've read on the net to date, SUM (in Excel) with an array formula answers the original authors problem of counting occurrences of values, not SUMPRODUCT; which I believe sums up the contents of cells in a range, if cells in other ranges match specific criteria.
Yes, if you use the '*' (as indicated above) then SUM() is sufficient though SUMPRODUCT() will work as it degenerates to SUM when there is only one argument. If you use two arrays as arguments (like: = SUMPRODUCT((A1:A4="All"), (B1:B4="Off")), then SUMPRODUCT() is necessary. Here's my understanding of how it works (I hope your able to follow my abuse of algebraic techniques):
=SUM((A1:A4="All") * (B1:B4="Off"))
expanding the array expressions...
=SUM((A1="All", A2="All", A3="All", A4="All") * (B1="Off", B2="Off", B3="Off", B4="Off"))
at this point Excel computes the equality expressions, for example...
=SUM((TRUE, FALSE, TRUE, FALSE) * (TRUE, TRUE, FALSE, FALSE))
expanding the array multiplication...
=SUM((TRUE * TRUE, FALSE * TRUE, TRUE * FALSE, FALSE * FALSE))
Excel, apparently, then, when forced to multiply Boolean values, maps TRUE -> 1 and FALSE -> 0...
=SUM((1 * 1, 0 * 1, 1 * 0, 0 * 0))
performing the multiplications...
=SUM((1, 0, 0, 0))
summing...
=1 + 0 + 0 + 0
resulting...
=1
I'm afraid, now, if I continue any further, Yvan will chastise me.

Inspection plan with multiple specifications

I have to maintain 1 inspection plan for 2 vendors for incoming inspection.
Eg: Vendor A & B
Vendor A, I have to check parameter Fe, Mn, Si
Vendor B, I have to check parameters Fe, Moisture (For B, no need to check Mn, Si. Also Fe specification will vary for A and B vendors)
How can we do this in SAP. I cannot maintain 2 inspection plans.
Vineeth

Dear Vineeth
1) Dependent characteristic
For MIC 1000 - Vendor A specification 10 to 20, For Vendor B spec is 30 to 50
Suppose we receive 10 pc from vendor A , after GR inspection lot will be created from the 10 pc and the specification for MIC (1000) will be automaticaly assgined to the inspection lot ie 10 to 20. If the vendor was B then the specification would be 30 to 50.
In inspection lot there will be only one specificaton either it will be of Vendor A or that of B
2) In multiple specification is normaly used for Customer, country etc.
you have customer A , B , C & D with differnet specs for one single mic and you want to valuate the mic with all specification seperately at one time
In this multiple specification is used. here we can valuate the mic with all the specification of A, B , C & D and results in a seperate window in the result recording tab. accordingly you can check wehter the mic has passed as ok with all cusomter specification
Regards
Gajesh

Multi-camera audio with multiple tracks

In Premier Pro 2 I was somehow able to use the automation features to adjust levels throughout my videos on multiple tracks, and that mix would flow through to the multi-camera sequence.
It didn't work in Premier Pro 3.1.1 when I just tried it. I then noticed that the help file says "In order to retain audio from more than one track simultaneously, mix all the desired tracks to a single track in the source sequence, select the resulting audio track, and deselect the Audio Follows Video option."
I opened my old projects in 3.1.1 and the multiple tracks still play in the multi-camera sequence.
1: How was I able to do this before and can I still do it?
2: If I must mix all tracks to a single track in the source sequence, how do I do that? I can't figure that out.

You have two choices, either you can hear the audio for the selected camera, or just audio track 1. You can't hear all audio tracks simultaneously without a little tweaking.
Once you're done with the multicam cut, place another instance in the new sequence on tracks 2. Then delete the video from track 2, and move the audio from track 2 onto track 1. This will allow all audio tracks from the original sequence to be heard.

Creating multi-page document with multiple templates

Hi,
I am new to Pages and am attempting to create a photo book that I can export as a PDF and have printed through an online service. I have successfully created multiple templates in Pages that I want to use in my book, but cannot figure out how to create a new page based on an existing template. If I select "New" or "New from Template Chooser" I end up with a brand new document, not a new page in my existing document. If I select Insert --> Pages, I am only given the choice to insert a Text or a Blank page. How do I insert a new page based on a template? Or, how do I apply a template to a blank page?
Thanks very much,
Eric

Okay, I have figured out a way to accomplish my goal. I have my master Pages document that I am adding pages to by:
1. File --> "New from Template Chooser"
2. Selecting my template
3. A new document is opened
4. I add my photo and custom text
5. Copy the new page from the Pages area in the left nav
6. Paste the new page back into my master document
This works, although is a bit cumbersome. Would much prefer to be able to simply add a page in my master based on an existing template, but I still don't see how to do that...

Planning with multiple plants

Hi all,
I have two production plants B and C.
I have a stock of 100 in plant B and a stock of 400 in plant C. So the total stock is available is 500.
I enter the requirement quantity of 1000 at plant A (planning plant) and do the MRP run.
Now I should get the planned orders generated at the two plants B and C for the remaining quantity. What can I do?
Rgds,

Hi,
As per my best knowledge you have no better solution in R/3 than the metioned process, that cannot realize your goal fully (you cannot optimize the process, you cannot consider the planning situation of all your plants during MRP run).
As I mentioned, more advanced solution is SAP APO that could realize your / your client's idea.
As for development: I cannot estimate how much and serious work could be to realize the multi-plant MRP run in R/3...but I'm afraid it won't be an easy job to do.
Please also wait for the others, maybe someone can tell you a workaround / good idea.
Regards,
Csaba
Edited by: Csaba Szommer on Oct 26, 2008 6:51 PM

Sync manually managed iPod played count etc with multiple iTunes libraries

I have my music and podcasts spread out in different iTunes libraries. So if I sync items, tracks from another library are deleted from my iPod therefore I manually manage my tracks. The downside is when you connect a manual iPod to iTunes your ratings, played date, count don't get synced with the iTunes Library. So I created a simple applescript that syncs tracks on specified playlists on your iPod with matching ones in iTunes. I realise applescripts exist to do this already but I wanted something which required no user input and simply did what would happen if the iPod was in sync mode.
The applescript:
tell application "iTunes"
    set iPodName to ""
    set syncPlaylists to {"Music", "Podcasts"}
    repeat with syncPlaylist in syncPlaylists
        repeat with i from 1 to count of sources
            if the kind of source i is iPod then
                set iPodName to name of source i as string
                set ipodPlaylistId to (first playlist of source iPodName whose name is syncPlaylist)
            end if
        end repeat
        set musicLibraryId to (first playlist whose name is syncPlaylist)
        --update every track itunes syncPlaylist with data from ipod syncPlaylist
        repeat with ipodPlaylistTracksCounter from 1 to count of tracks of ipodPlaylistId
            set ipodTrack to track ipodPlaylistTracksCounter of ipodPlaylistId
            set ipodTrackData to {name, artist, album, played date, played count, rating} of ipodTrack
            set foundTracksInPlaylist to (every track of musicLibraryId whose ((name is item 1 of ipodTrackData) and (artist is item 2 of ipodTrackData) and (album is item 3 of ipodTrackData)))
            repeat with eachFoundTrackInPlaylist in foundTracksInPlaylist
                --use try blocks in case of missing data
                try
                    set played date of eachFoundTrackInPlaylist to item 4 of ipodTrackData
                end try
                try
                    set played count of eachFoundTrackInPlaylist to item 5 of ipodTrackData
                end try
                try
                    set rating of eachFoundTrackInPlaylist to item 6 of ipodTrackData
                end try
            end repeat
        end repeat
    end repeat
end tell
Mac Mini G4 Mac OS X (10.4.8) 1 GB RAM, ATI 9200 32MB, Samsung 940BW 19" Widescreen TFT LCD monitor

btw if you don't know how to use applescripts. Open script editor, you'll find it in Applications/Applescript/. Open a new window and copy the code in it and press compile. Save as a script and place in your home folder at ~/Library/iTunes/Scripts, create a Scripts folder if it doesn't exist. Alternatively, save as an application, on opening it will do its magic! Make sure an iPod is mounted in iTunes otherwise an error message will pop up.

Lifecycle planning with multiple locations

Hi Experts,
Imagine we have:
1) Product A in Location A
2) Product B in Location B
Now there is a initiative to discontinue production of Product B in location B and it is expected that customers will buy instead Product A in Location A.
So I need to map sales history of Product B in Location B to Product A in Location A. How can I achieve this functionality?
- Life-cycle management allows me to do only within the same location.
- Other option is to do a realignment, but it is too dangerous for often use from my point of view.
Does anyone have implemented some development on this?
Thanks,
Art

Art,
1. If you want to consider using Life cycle planning only , Try creating the life cycle table on Product and Location characteristics. Create the life profile and then maintain both Product A/ Location A values in the lifecycle table.
2. Realignment should be considered as one of the option, if your users are OK with actually copying the sales history to new product instead of just referring the sales history for forecasting without actually copying. Also, as mentioned earlier by Satish, execute realignment in two steps if you want to play safe. Copy first and then delete CVCs belonging to Product B/Loc B as a next step once you are sure the data has been copied correctly to Prod A/Loc A.
Also you could do this in Quality first to feel confident about results.
Hari Vomkarey

Exchange 2010SP1 Multi-Tenant Issue with Multiple Domains

I have an installation of Exchange 2010 SP1 with multi-tenant support enabled via the install time /hosting switch.
Everything works well for my smaller clients. I now have a bigger client that has about 300 users and 3 domains. The users are divided roughly equally amongst the domains - ie, 3 domains each with 100 users. I've added the first domain as normal:
$c = get-credential
New-organization -name "Pretend Company" -DomainName domain1.com -ProgramId HostingSample -OfferId 2 -location en-US -AdministratorPassword $c.password
After that I logged into the ECP control panel and created all the users. The migration went smoothly and has been working well for the last week. Now, it's time to add the next domain. Since the client wants all 300 users visible in the same GAL, I just
added a domain to the organization:
New-AcceptedDomain -Name domain2.com -DomainName domain2.com -Organization "Pretend Company"
This is where I run into problems. When I try to create the users for domain2.com via ECP, I am able to create the user successfully, and select domain2.com from the drop down. Once the user is created however, I am able to see that although their UPN
is [email protected], it created their email address as [email protected].
I tried creating the users manually via EMS:
$password = Read-Host "Enter password" -AsSecureString
New-MailUser -UserPrincipalName [email protected] -Password $password -Name "Test User" -Organization "Pretent Company" -PrimarySmtpAddress [email protected]
The user creates successfully and I can see the user created in the proper OU in AD. Unfortunately I can not see them in ECP nor can I see them if I do:
get-mailbox -Organization "Pretend Company"
This makes the management of the users very difficult to delegate, and I'm not sure that the users at domain2.com will even work.
This brings me to my questions:
(1) Is is possible create accounts that have different domain names in their default email addresses within the same Organization in /hosting mode?
(2) Is this something I need to do with an EmailAddressPolicy? I read the documentation but it didn't seem /hosting friendly.

Hi Earonk,
Please post your issue on below forum, you will get more help from there:
http://social.technet.microsoft.com/Forums/en-us/exchange2010hosters/threads
Regards!
Gavin

Multi-mapping scenario with multiple receivers

Hello all,
I have an interface using multi-mapping to generate to different files types from one source; works great.
JDBC --> XI --> (1) XML (2) CSV
I now need to have the XML file go to one receiver and the CSV file needs to go to a second receiver. I've looked at the blog:
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
This blog shows how to configure dynamic receiver determination based on the source data. In my case the output files are identical (as far as mapping), the only difference is the output format. Has any one seen a "How to" document or blog more in line to my scenario?
Regards,
Jose

Hi,
You can also do this way
You can define as many number of Business system you need. Say for eg you need to send XML to one BS and CSV to another BS.
Instead of doing Extended interface determination... Goto to Receiver Determination and when you are adding the Receiver service you have the option to add one more Service... There you give both the Business Service and hence you will have two inbound interface and you can different interface mapping and so on..
Regards,
Prakash

Printing a multi page pdf -with multiple pages per sheet

In order to save paper I create multiple page pdfs and in the print dialog box under Layout I select Pages per Sheet 2 , etc. The problem is when i try to print out the document, it only prints out the first page. The other pages fail to print. this only occurs when printing a pdf in this way. I have already re-installed Acrobat.
error on printer is: error typecheck offending command and the file name changes on the printer to acr.000000.tem
I'm using acrobat 8. Printing to a xerox docu-color printer.
Mac 10.4.11

Nope, that's a Flash-only effect. Sometimes people try to embed a SWF (Flash file) into a PDF, but that only plays like it's a movie, and doesn't work well.
I think you should give up on the idea if you want to use PDF as the distribution method.

Multi-Select LOV with multiple return columns

Hi,
I'm wondering if it's possible (and how) to return more columns from the LOV page the calling page. Default only 1 column is displayed in the LOV and 1 column is returned.
However it's easy to display an additional column in the LOV: Just copy the column tag change the binding column to display and change the prompt.
Furthermore in my situation I don't have a FK between the calling page and LOV. It's just a LOV which returns values which can be edited after.
Regards,
Marcel

Marcel,
In the upcoming release it will be possible to supply a comma-separated list in the 'Lookup Display Attributes' field, so that multiple fields are shown in the LOV.
When you use UIX and have an Entity Association to the Entity Object in the LOV, passing back multiple fields is already possible. But in your case, you will probably have to use your own javascript to implement this functionality.
Kind regards,
Peter Ebell
JHeadstart Team

How do you auto-size row height in a multi-column listbox with multiple lines?

I have a multi-column listbox containing four columns. The fourth column is for notes, which will be of arbitrary length; they can get to be very lengthy. I want the cells in the "notes" column to have a constant width. When the width of the text is wider than the cell, I want the cell to automatically adjust its height and go to the next line so that all of the text is visible. For example,
|<--CELL WIDTH-->|
This is not the way ...I want the listbox cell to function.
This is the way I
want the listbox
cell to function.

Yeah, I looked at the responses for questions like mine. Most of them adjust the width of the column to fit the text, which is not what I want to do. I figured that I would have to programmatically insert new lines when the text gets too long, I just wanted to make sure that there wasn't an easier solution before I spend the time developing the code to do that since it will take some time. Thanks.

Multi-Counter Plan with multiple Equipments

Similar Messages

Maybe you are looking for