Multiple Accounts in 7.0 using Dynamic User Forms and Account Types

Guys/Gals,
We are attempting to implement the new way of handling multiple account types in IDM 7.0 and so far are coming up unsuccessful. We have managed to customize the Dynamic Resource Forms to create standard default AD accounts, however when we attempt to create different account types of AD(i.e type ADMIN account, or TEST account) we have a no go. We've made identity rules for the types of accounts we have, and the form displays the attributes, however when we go to save, the it attemts to update the default account, and not make the new account type. Has anyone implemented these new features? Any help or suggestions would be greatly appreciated. Thanks!

Were you ever able to implement this? I was told this was the way to handle multiple accounts for a user on a resource, but so far it's not making much sense to me, nor does it seem feasible. I was wondering if you had any success with it.

Similar Messages

Appplications using "Administrator" user id and password in J2EE engine...

All,
We have a EP 7.0 with SPS 14. Our "Administrator" user id account gets locked every now and then.
Eventhough if we unlock it or change the password using configtool, it works for sometime..but,again the "Administrator" user id account gets locked.
Somewhere some application is still using the old password. So,no matter what password we use or we updated the password everywhere..it works for some time and again the its getting locked.
Can anybody tell me how to find all the applications using "administrator" user id and password or the applications which requires administrator user id directly or indirectly.
Is nwds and nwdi deployment uses the "administrator" uidpw ?
Note: We have already tried with updating the password using configtool and updated the password all the places.it works for some time and it gets locked again..Please help..Thanks.

to Michael Nicholls
Addy 365 posts:
We have already tried with updating the password using configtool and updated the password all the places
Yes from log it looks like impossible to check, but you can determine immediately whether the blockage occurs after restart, or only at certain times of the launch of a job ....
To Addy 365
search after restart the lines in security log like
LOGIN.FAILED, and try to recheck ol RFC from all other system's you have in your enterprise ....
P.S. first check are you have any available RFC listeners in JCO RFC provider.
To Michael Nicholls    in ABAP side we can check in sm21 from with terminal blocking occurs, why Why the same is not implemented in JAVA? Or for this need special tool like Wily Introscope ?
Regards.

I am using the user name and password given to me by

I am using the user name and password given to me by Virgin on the email 'other' , after the initial page it comes up with IMAP settings which I don't have so I click on the POP page and give all the settings listed by Virgin on ints website (using ntlworld and not virgin as instructed) but it still comes up with 'Unable to Verify' So something is sticking somehwere but I don't know where!
Thanks very grateful for assistance

Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

ALV display using dynamic field catalog and dynamic internal table

hi ,
please guide me for ALV display using dynamic field catalog and dynamic internal table.
Thank you.

Hi Rahul,
maybe thread dynamic program for alv is helpful for you. More information about the [SAP List Viewer (ALV)|http://help.sap.com/saphelp_nw70/helpdata/EN/5e/88d440e14f8431e10000000a1550b0/frameset.htm]. Also have a look into the example programs SALV_DEMO_TABLE*.
Regards Rudi

*when we use at user -command and give smaple code fro at user-command*

Hi experts,
i am new to abap can any body tell me when we use AT USER-COMMAND and give a sample code for that.
point will be rewarded.
thanks.

Hi,
AT USER-COMMAND is a list Event.This Event is triggered when user make an action on the Application Toolber Or Menubar.
Here is the Program.
START-OF-SELECTION.
SET PF-STATUS 'TEST'.
WRITE: 'Basic list, SY-LSIND =', sy-lsind.
AT LINE-SELECTION.
WRITE: 'LINE-SELECTION, SY-LSIND =', sy-lsind.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'TEST'.
WRITE: 'TEST, SY-LSIND =', sy-lsind.
ENDCASE.
This program uses a status TEST, defined in the Menu Painter.
Function key F5 has the function code TEST and the text Test for demo.
Function code TEST is entered in the List menu.
The function codes PICK and TEST are assigned to pushbuttons.
The user can trigger the AT USER-COMMAND event either by pressing F5 , or by choosing List -> Test for demo, or by choosing the pushbutton 'Test for demo'.The user can trigger the AT LINE-SELECTION event by selecting a line.
Hopr This Will help You.
Regards,
Sujit

W3wp.exe using 100% user time and 0 % priviledge time

Hi all
We deployed application (enhancements) which is developed with ASP.NET with C# code behind.
After deploying in Application server we are getting problem
Like "w3wp.exe using 100% user time and 0 % priviledge time"
Please help me regarding what may be the problem.

How to trace web URL ?
Refer:
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/c56d19af-b3d1-4be9-8a6f-4aa86bacac3f.mspx?mfr=true
http://forums.iis.net/t/1146821.aspx
Regards, RSingh

Adobe Reader XI - dynamic PDF Form and the E-Mail Dialog

Hi Community,
I have a dynamic PDF Form and we use the E-Mail function to save the XML-Data to local harddrive. That works until Adobe Acrobat Reader 10.1.2. But with the Adobe Reader XI (11.0.4) the E-Mail Dialog has changed so I am One is forced to send the XML file with Outlook or the internal mailer and has no option to save the file locally.
Does anyone know a workaround or something similar. The Live Cycle server with PDF extension is too expensive for our small project.
E-Mail Dialog (10.1.2)
If you choose Internet-E-Mail you get a Save-As File Dialog
E-Mail Dialog (11.0.4)
There is no way to save the XML-Data to local Harddrive.

Hi Pat,
Are you using Adobe Reader XI? And not Acrobat. It does not ask me to save the form if there are unsaved changes.
I have used previous versions of reader for saving this form data and it did allow me to save it with ctrl+s. And those versions did prompt me to save the changes before closing.
I guess I should not have updated the reader.

I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." This is a IRS form and has worked before.

I am trying to use a interactive form and it says "see below" This is a IRS form and has worked before.
is there a tech support phone number?
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
Either
download the form to your local disk and fill it from there
use a browser that employs the Adobe Reader plugin
configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Unable to connect to Wi-Fi connection using WPA2 PSK authentication and encryption type TKIP

I was referred to here from this thread at the Windows Insider Program: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/unable-to-connect-to-wi-fi-connection-using-wpa2/07bae1ed-c7fb-4f85-9d26-5549cc23e57a?msgId=2eb70420-fe35-494b-a13d-dcacd4d55eb9&rtAction=1426697691002
My issue is copy/pasted below:
Original Title: TKIP selection in WiFi network settings
I have a workplace WiFi connection using WPA2 PSK authentication and encryption type TKIP.
On the machine I used to test Windows 10, I had a previous installation of Windows 7 professional which connected to my workplace WiFi using the above settings. After installing Windows 10, my workplace wifi settings were imported and worked fine.
Windows 10 had a system crash, and since I had deleted my previous windows installation, I performed a complete reinstall of Windows 7. However, when I went to install Windows 10 again, I had not taken the time to set up my workplace Wifi on Windows
7 before installing Windows 10. As a result, I had to set up my workplace wifi as a new connection in Windows 10.
When going to set up the wifi connection, the encryption type was grayed out, but appeared to default to AES. Searching the internet suggested that Windows 8.1 did not need a encryption type selected, because Windows could automatically determine
if it was TKIP or AES, hence why the option to select encryption type was grayed out. However, after completing the setup of my workplace wifi, Windows 10 could not connect to my workplace wifi. After restoring Windows 7 with a factory reset, and setting up
the workplace wifi (the encryption type selection was not grayed out and I manually selected TKIP encryption), my workplace wifi was working again.

I was referred to here from this thread at the Windows Insider Program: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/unable-to-connect-to-wi-fi-connection-using-wpa2/07bae1ed-c7fb-4f85-9d26-5549cc23e57a?msgId=2eb70420-fe35-494b-a13d-dcacd4d55eb9&rtAction=1426697691002
My issue is copy/pasted below:
Original Title: TKIP selection in WiFi network settings
I have a workplace WiFi connection using WPA2 PSK authentication and encryption type TKIP.
On the machine I used to test Windows 10, I had a previous installation of Windows 7 professional which connected to my workplace WiFi using the above settings. After installing Windows 10, my workplace wifi settings were imported and worked fine.
Windows 10 had a system crash, and since I had deleted my previous windows installation, I performed a complete reinstall of Windows 7. However, when I went to install Windows 10 again, I had not taken the time to set up my workplace Wifi on Windows
7 before installing Windows 10. As a result, I had to set up my workplace wifi as a new connection in Windows 10.
When going to set up the wifi connection, the encryption type was grayed out, but appeared to default to AES. Searching the internet suggested that Windows 8.1 did not need a encryption type selected, because Windows could automatically determine
if it was TKIP or AES, hence why the option to select encryption type was grayed out. However, after completing the setup of my workplace wifi, Windows 10 could not connect to my workplace wifi. After restoring Windows 7 with a factory reset, and setting up
the workplace wifi (the encryption type selection was not grayed out and I manually selected TKIP encryption), my workplace wifi was working again.

Scenarios to use dynamic UI access and creation.

Hi,
I would like to know the possible scenarios to use Dynamic UI creation or access. Since so far I don't find any compelling need to use dynamic UI creation or other dynamic access to UI element.
ThanQ for Ur time.
Cheers,
Sam

Hi Sam.
Dynamic Ui creation is only neede if you do not know which or how many UI
elements you need during design time.
We have one scenario where we need to generate select options for reports dynamically. The
select options are defined in application tables and read during run time. So
depending on the defined option in the table for a certain report, the selction UI is
built dynamically.
Many cases can be handled by using context attributes for the UI element
properties e.g. (read only, visibility or required/normal item). We have some views
where only certain user types have to enter certain data. So depending on the
user type the visibility or required property of input fields is controlled by context
sttibutes.
But this is just one point of view. I guess there cvan be a lot of scenarios where
dynamic UI creation is needed.
Anyway, always consider that dynamic UI creation is less maintainable cause
code is harder to read and understand.
Cheers,
Sascha

Use of user status and business actions

Hi all,
I'm new at status profiles, user status and business actions.
Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
Let's say I've a status profile with following user status with according business actions:
- status: new;   business action: to progress
- status: in progress;   business action: to confirm
- status: confirmed;   business action: decline or close
- status: closed;   business action: close
What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
Regards,
Christian

Christian;
If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
1. Enter a Status Profile.
2. Assign the status profile to an Object Type.
3. Define the User Status.
4. Assign Business Transactions to user statuses.
5. Translate the status profile and user statuses.
You can also to use this function to simulate the status development for a particular object.
To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
Status profile info
Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
The first block contains the permitted object types.
The second block contains the user statuses.
The third block contains the following information for each user status:
which transactions it allows
which transactions it allows with a warning
which transactions it disallows.
I hope help to you
Regards
Luciano Nobrega

HT204053 Using multi-user IDS and passwords to access the apps website is turning me into an Apple hater, frankly. Am I alone in the crowd of users?

Ihave abouy 4-5 different user IDS and passwords that I have to juggle to get access to the Apps store. Almost every time I try to get an update, etc., I have to go through the routine of either changing both user ID and password, or just the password. I am a long-time Apple customer but have drifted as far as possible from using Apple updates and purchases. It's just not worth the time, exasperation and energy involved. I can understand that Apple doesn't want to have varied IDs wrapped into a single ID, but it would be helpful if Apple took the time to delete all but one user ID, upon the request of an Apple customer, instead of spending so much time issuing yet another iPad and iPhone. At least, have mercy on some of Apple customers who are still buying snd using laptops and desk tops. HELP!!!

I'm not sure how you came to have so many Apple IDs, but I'd suggest that you simplify things.
I just checked the "Apple ID Support" page:
http://www.apple.com/support/appleid/
as I imagine you have, too, and I find no instructions for closing or deleting an Apple ID, but you could simplify things quite a bit by using only one Apple ID on all of your devices.
It will take a bit of time, but I think you'll find that it's worth it.
If I were you, I would just delete all purchased apps (if you've purchased music, that's a whole different issue - but you could probably simplify your music purchases, too) from all devices accept one - your most "important" device - and log out from all other devices. Then log in from those other devices using your preferred Apple ID, and reinstall the apps and other stuff.
It's going to be tedious, and it'll take some time, but I think you'll have a much better experience over the long term.
For one thing, you'd always be notified automatically to update/upgrade your stuff, and your log-ins to do so would be much easier.
I know it's not good news, but I hope it helps.

Multiple reports in same sheet used as input form

Hi,
I am using the Excel EPM Add-In and I would like to use different reports in the same sheet, going with the same connection to the same Planning Book and Data View in APO DP. I would like to use them all as an input form (I already checked 'Use as Input Form in the sheet options). When I try to upload adapted data from the first report, this works well, but when I try this from the second report, I get the error 'There is no data to save'.
Can anyone help me on this issue?
Kind regards,
Kristof

Hello Hassan,
I'm not sure if I completely understand your question, but I suppose you always have to do the following steps:
- Log on to the system (your usual SAP user and pw)
- Create a report:
- Choose the characteristics you want to see and always take the Key Figures (Row Axis) and Time (Column Axis) into the report (in the example, I only took the Product characteristic)
- Click on the dimensions you have chosen and select what you want to see in your report (I often take 'All members')
- Press 'OK', normally you should now see the data you chose.
Kind regards,
Kristof

[custom application] we did'nt use the register form, and it works anyway !!!!

[custom application] we did'nt use the register form, works anyway ?
Excuse my english:
Our developper's have created the custom objects in a new oracle user.
The have given all grants ans synonyms to APPS (by the hand with manuel scripts).
They didn't use the 'Security\oracle\register' forms.
They have just declared the application in 'security\oracle\data group' using APPS as oracle id.
So they did not have to enter a password in AOL for the new custom oracle userneme.
QUESTION ?
Did we miss something ? What is wrong ?
Are we qoing to face some issue (with standard AOL admin scripts for exemple ?)
Does Always OA connect via APPS or did it sometimes need to connect
with the real oracle usernam of the custom application ?
Thanks in advance for your answers.
Pierre from Paris.

I believe you're probably okay, as long as you are only adding objects, not modifying existing ones. We have custom database accounts registered through the aforementioned forms, but as a rule-of-thumb we always grant all on any custom objects to APPS with grant option. All custom packages we create are also created under the APPS schema. The underlying user that is running for our custom forms & reports is still APPS. We just put tables, indexes, and similar objects under the custom accounts primarily so that we can clearly tell what objects are custom and which are not.
Keep in mind that one risk you run with any customizations you make under APPS (or any other delivered database account) is that there is always a chance that Oracle could create an object with the exact same name in the future, potentially overwriting your customizations
Hope this helps!
Josh Wasser
[email protected]

Can Actionscript do user forms and image generation ?

Hi all,
I need to build a web application in flash, the gist is the application takes users inputs and generates a network diagram based on that inputs.
I actually coded the entire application in JS DOM and PHP GD, and client comes back suddenly saying they cant support PHP (IT restrictions). So now am back to square one, wondering, how to draw network images dynamically. JS cant do it. So I stumbled upon Actionscript.
So if i were to code an application entirely in actionscript,
My questions,
1. Does actionscript provide me a way to create input fields (select, text, textarea...etc)
2. Would i be able to use these user inputs from Question 1 to generate a network diagram ?
3. Can actionscript do Question's 1 and 2 without needing support from a server side
     scripting language like PHP ?
If somebody can help me understand, that would be very helpful. Thanks.
Rgds,
Kris

Thanks for the response.
However it still doesnt answer my question.
I cannot have a side side language(PHP, .NET ..etc) involved at all.
All i want to do it, design a form in FLEX and then without sending the form to the server side, i just want to read the fields (on an event) from the client side and do my processing on the client side and show the results again on the client side.
For example (HTML/JS)
Field A: <input type='text' id='one' name = 'one' /> <BR> <input type ='button' id='button' value='Generate' onclick = 'submitForm()' />
<script>
     function submitForm(){
          document.write(document.getElementById('one').value);
          return;
</script>
With the above example, i dont need server side support at all. Can i do the same thing with FLEX.
My only reason for trying FLEX is , i need to dynamically generate an image based the input values chosen by the user.
So keeping the above example in perspective, can i just read that particular text field and generate an image and label/embed the value in that image appropriately ?
any help would be very helpful. Thanks.

Multiple Accounts in 7.0 using Dynamic User Forms and Account Types

Similar Messages

Maybe you are looking for