Multiple Master Orgs

Can we have multiple master orgs under one Operating Unit? In case if yes, which Master Org we should mention in the "Supplier-Purchasing" tab in financial options in Oracle Purchasing?

Recommendation is to have one master org for the business.
Is there any specific need to have multiple master orgs in your business.
Thanks,
PS.

Similar Messages

Relation between item master org and operating Unit

How single item master org can relate to multiple operating Unit so that items defined at Master Org level can be accessed in other operating units ?

Hi,
Item will be accessed in inventory organizations which you assigned the item to.
To access items from particular Operating Unit in Purchasing module
define Operating Unit Organization as a Inventory Organization as well.
Then choose this Organization as a Inventory Organization in Purchasing : Setup>Organizations>Financial Options.
In Order Management you choose an Operating Unit which items can be accessed.
Each item assign to Item Master Organization and to Operating Unit Organization and to required Inventory Organizations.
This works in 11i. I dont know how it is in R12.
regards,
Marcin

Rearrange pages when printing adobe form with multiple master pages

Hello!
Good day to you all.
I have an issue in regards with printing my adobe form with multiple Master pages. I have 4 master pages:
1st master page: a
2nd master page: b
3rd master page: c
4th master page: d
all with different headers and footers all having the same contents (items). I don't have issue with one page content (it just prints 4 pages with different headers and footers). The issue comes out once the items exceed 1 page.
What happens is that the preview/print shows (example: 3-page item)
a1-a2-a3-b1-b2-b3-c1-c2-c3-d1-d2-d3.
What i need is to print these such that all 1st pages of the 4 master page to be printed first, then all the 2nd pages, then all 3rd pages. Please see below:
a1-b1-c1-d1-a2-b2-c2-d2-a3-b3-c3-d3
This is because we will be using carbonless copy paper during printing and it's possible that it would be printed on batch jobs. Please suggest ways to do this.
Thanks a lot in advance!
Best Regards,
abap_peer_dangs

Hi,
Is that requirement of multiple pages as groups only at the time of print or at print preview also...?
Can you have a Print button on this screen or you should be using the Abobe toolbar's Print button..?
Well if this on a click of a button in the form and the requirement is only at the time of print and not on print prieview I can have a JS script which does this...
Let me know if this suffice, I can try with a local file and send you the script.
@ Chris: I didn't understand what do you mean by reported, I was eager to hear and learn a solution from you may be a new approach which I am not aware of ...?
Cheers,
Sai.

Change Item Master Org

HI, I have a Client who has 104 inventory Orgs. 4 are average costing. the rest are standard costing. BUT the Item Master is Average Costing. it was setup like so when i got in. the question is,
Can i create a new Item master Org and change it for all the Orgs so i can take advantage of transferring costs across standard costing Orgs and have one item master list?
Thanks
Yadi

The primary uom on the item master cannot be changed. You can set up conversions between primary and other uoms.
One alternative you can look into is to rename the incorrectly created item to a different item number and redefine the item from scratch, with the correct UOM. Please note that in order to update the item number for the existing item you have to set the profile option Inventory: Updateable Item Name to Yes. (Please double check the exact profile option name).

Assign Multiple Sales Org for One Plant in STO process

Hi Experts,
Aware that I can assign multiple sales org to 1 plant (relationship: many to many).
I am trying to create STOs to supplying plant and assigning them to different sales organization but encountered problem.
Example:
Supplying Plant 1000 - Sales Org 1000A (food) and 1000B (apparel)
Receiving Plant 1100
Plant 1100 wants to issue 2 STOs to Plant 1000 - 1 for each Sales Org (for instance STO1 to food division, and STO2 for apparel division).
However, when I tried creating STO in the system, noticed that in the shipping tab (item details) the sales org, DC has been assigned to 1 particular assignment and data is locked.
Tried to get into SPRO to configure and define the shipping data for plants but noticed that it's 1 to 1 relationship (SPRO - IMG - MM - PO - Set up Stock Transport Order - Define Shipping Data).
How can this be done?

You can set different sales areas (~sales organisation) for one plant in SAP - based on issuing SLoc provided STO between storage locations is activated.
SPRO > Materials Management > Purchasing > Purchase Order > Set up Stock Transport Order > Set Up Stock Transfer Between Storage Locations > Define Shipping Data for Stock Transfers Between Storage Locations
Edited by: Csaba Szommer on Jul 2, 2011 6:14 PM

Assign value from Item Master Org to Child Org

Hi guys i have created item master org and assign it some items,now i have create a child organization .now am going to miscellaneous transaction and want a transaction but my child organization item list is empty.please help me how i can assign master org item to child org

Hi,
You just need to go to the master item form, select the item/s, and click on Tools > Organization Assignment... That will take you to a rom where you can assign the item to any child organization. Hope it helps.
Regards.

Multiple Master without Save

I want to add Multiple Master with Detail in Oracle Form 6i without Saving. As I have some validation prior to Commit

use the Post; built-in in the when-new-record-instance trigger.

Dynamic form with multiple master pages

I have a 7 pg form that has different data in the footer area. I placed the footer info on it's own separate master page and set the page to the corresponding page numbers. I moved the content area above the footer section so my content can flow to the next page properly. But my problem is since I set the Pagination area to "Place: Top of Page "Page 2" and the rest accordingly, I'm getting an almost blank page with the data from the previous page and the next page pushes to a separate page of its own for every page. Not sure how to make the form flow continuous, this is my first time having to do a form this way. Typically I set the pages when I'm done to "Following Previous" instead of "Top of Next page" in the Pagination Place field for each section and everything works fine then. I've never had to deal with a different master page for each page in the form.
Any help or suggestion would be greatly appreciated.
Jim

If you have 7 pages with different footers, wouldn't it be easier to have the footer also part of the body page instead of Master page.
Unless you are adding dynamic content at runtime, you can keep the footer in the body page itself. That way you can avoid multiple master pages.
If you still have issues, you can share the form, so I can have a look at it.
Thanks
Srini

FAQ: Multiple master fonts on OS X

(This notice has been updated repeatedly to discuss: OS X 10.2, Adobe app bugs with 10.2 support, "cocoa" applications; Adobe phasing out MM font sales; Adobe discontinuing tech support for MM fonts. Last update: 23 Sep 2005.)
With versions 10.0 and 10.1, Mac OS X's native support for Type 1 and OpenType initially failed to include support for multiple master Type 1 fonts. This problem is fixed in OS X version 10.2 and later for applications using the "carbon" APIs, but not for applications using "cocoa" APIs. The two most common "cocoa" applications are TextEdit and Keynote.
Note that applications running in "Classic" mode are unaffected. They still need ATM for supporting Type 1 fonts, including multiple master fonts.
There is a workaround for some Adobe applications, such as InDesign 2, Illustrator 10 and Photoshop 7. You can rely on the native font imaging support in these applications, which is largely independent of the OS. Just put the fonts in the the Fonts folder in the application's folder, or the Application Support/Adobe/Fonts folder.
Additionally, the above-mentioned Adobe applications may have problems accessing all multiple master instances, when accessing the MM fonts which are installed at the system level, even in Mac OS X 10.2 and later. In some cases, this may be worked around by installing the fonts in the application's own fonts folder or the Application Support folder as described above.
PHASING OUT MULTIPLE MASTER FONTS
Adobe stopped making new MM and Type 1 fonts in 1999, and there is no equivalent to MM in the newer OpenType format. From late 2002 to mid 2003, Adobe phased out sales of multiple master fonts. As of this writing, they can only be bought from Adobe as part of Font Folio 9, which is still available for people who need compatibility with older fonts. The current version of Font Folio is Font Folio OpenType Edition, which shipped in August 2003.
At the end of 2004, Adobe stopped offering tech support for MM fonts, excepting for people with Font folio 9.

This inquiry is addressed to Thomas Phinney or any other font-savvy technician at Adobe. It relates to the very latest versions of the Mac OS (v.10.2.2) and Adobe Design applications (InDesign 2.0.1, Illustrator 10.0.3, Photoshop 7.0.1). It is about the use of Adobe's Multiple Master fonts. I was a big subscriber to the MM technology and have virtually all of the MM fonts Adobe issued. I have used them extensively in designs for the past four or five years. Now they have become problematic at best and Adobe has done precious little to keep MM fans informed regarding how to deal with the situation.
I have read every entry in this discussion thread and I still am unclear about where to install MM fonts and what the consequences might be. Furthermore, it took an hour of searching to find this thread. I am very disappointed in Adobe for not providing guidance on this issue in some very obvious, prominent place on their Web site.
As nearly as I can figure, the best place for MM fonts is in the Library>Application Support>Adobe>Fonts folder. Is this correct? And if it is, doesn't this mean that MM fonts will only be available to Adobe apps and therefore not be available to Xpress or Freehand or any other non-Adobe app?
And then I read that some MM instances still may not be available in Adobe apps and that "in some cases" this may be worked around by installing them in the applicaiton-specific fonts folder. Can they be installed in both locations at once? I don't think so. So do I now have to move MM fonts from folder to folder to insure performance? And what if I am working in all 3 Adobe apps at once (not at all uncommon)? What then?
Although this is the best advice I have been able to find so far and I thank you for it, it is still very "if-y." And very hard to come by. Adobe's behavior here is rather like the newspaper that makes a serious error on the front page and then prints an apology a week later on the bottom of an inside column on page 24 (or some other deep left-hand page), in 6 point type!!
The clear (although unstated) implication of this advice is that I should not expect font management programs (Suitcase, Font Reserve nor FontAgent Pro) to handle MM fonts. Is this correct? If it is, please state it clearly. This, of course means that MM fonts must always be active and will only appear in the font menus of Adobe applications (don't try to use them in Freehand or Xpress, let alone MS Word.) Does it not? And yet, most of my work is still done in Xpress, because most of my printers still aren't accepting InDesign files (most do not even have the app installed; hell, most are still running OS 9.)
Frankly, when I think of all the time and money that Adobe spent promoting the MM technology and all the money I (and many others) spent on MM fonts, I cannot help but feel betrayed by Adobe. Not for abandoning the technology (which I can accept as a matter settled in the marketplace), but for leaving high-and-dry we designers that bought into the technology and are now finding that not only does the new Mac OS have trouble with MM technology, but the Adobe design applicaitons for which it was intended also have trouble with it! What are we expected to do??? Will Adobe be issuing free postscript or OpenType versons of their MM fonts? No way! Or does Adobe expect us to convert all of our MM fonts to post script using a conversion utility (like TransType)? Yes, I rather suspect this is the route they would have us take.
Please do not reply to this inquiry (except to praise it, of course) unless you can speak for Adobe on the matter. Thank you.

Multiple Master and Macromedia Freehand MX

Multiple Master Font (NeuvaMM-395wt 750wd) changes to
NeuvaMM-330RG 475NO when converting to Paths or importing to PDF or
EPS files while in Macromedia Freehand MX 11.0.2. I use 10.4.9 on a
G5. Does anyone else have this problem. I could use some help
figuring this out. Thank you. Tom Wright

I use Freehand MX on my Mac mini and find that it runs as well as on my PowerBook 1.25GHz so you should find a good improvement over your G4 tower.

How to Configure ODI Console to Connect Multiple Master Repositories

Hi,
Can anybody help me in following,
1. How to configure ODI Console to access Multiple Master Repositories and its corresponding Work Repository?
2. Solutions are not supported by ODI Console? Is it possible to import scenarios as solutions in ODI Console?
Thanks
MT

MT,
1. I can only speak on my own experience in setting up the ODI console, but my understanding is that the console is configured against a single master repository - the connection details are picked up when the WebLogic server starts. If I'm wrong, I'm sure one of the gurus will correct me.
2. I haven't come across a way to do this - I'm using 11.1.1.5. Aside from my initial go-live, I tend to only promote individual scenarios across environments. For the rare occasion when I need to do a larger bulk import I'll just use ODI Studio.

Multiple Master Fonts

Hi folks, can they actually run on panther? Cannot seem to get these to load properly. Any help would be appreciated. John.
G5 Mac OS X (10.3.2)

Hi JJJJ,
You should be able to use those. Multiple Master fonts are a creation of Adobe. They are a variation of Type 1 PostScript fonts. As such, they require both the outline printer portion of the font and the suitcase of screen fonts. Make sure you have the items together in the same folder.
At the end of 2004 (with a minor exclusion for those using Folio 9), Adobe stopped producing Multiple Master fonts. They have also stopped developing or selling Type 1 PostScript fonts. It's all OpenType from them now.

Applying effect to multiple master clips in bin

Basically I would like to apply the timecode reader effect to multiple master clips in a bin so that I can batch export those clips to an external drive for the director to take and watch at home.
I know how to apply an effect to multiple clips in a timeline, but is there a way to do it right to multiple master clips in a bin?
Right now my process is to duplicate the clips for a scene as new master clips in a separate bin, one by one apply the timecode reader (as favorite effect) to each clip, then batch export those clips to the external drive.
As I get to the scenes with many many clips, applying the effect gets a bit tedious. Just hoping there's a faster way I'm not thinking of or unaware of.
Thanks.

It always seems like a strange thing to do, but the standard for these kinds of things seems to be to put everything on the timeline, apply the effects (you know how), and then drag them off the timeline into a fresh bin.
It's very quick and does the job just fine, but always somehow feels.. wrong.
If there were a way for a timecode reader to be applied by Compressor, then it would be much more of a batch thing. But I don't think there is.

As the cronos MM(Multiple Master) is discontinued by Adobe and there is only pro version on sale .If i can purchase mm version through adobe ? or If it is free for us to use ,no matter for commercial or uncommercial use?

We have a branding project for a college. we decided to use the cronos MM font as our major font .i searched from internet that there is only cornos pro on sale .but what we want is cornos MM,all the message that i got from the internet is that the Cronos MM is free for download. Is it free for a university to use it ? or we have to buy it ?if we have to buy ,could you tell me if i can buy that font,cornos MM from adobe ,as it is discontinued by adobe?

Addressing the first of your questions, no, Adobe no longer licenses any of its type library in Multiple Master format. Although Type 1 Multiple Master technology was a very promising technology over 20 years ago, it was never particularly popular with our customers nor was it supported well or at all by other applications and operating systems. Thus, that format was discontinued. Some Adobe applications continue to support Multiple Master technology, but the ability to create and use custom instances of such fonts is not available.
When Adobe re-released its type library in OpenType CFF format, for all the previous Multiple Master typeface families, all the predefined instances of the Multiple Master fonts were issued as individual typefaces. Since very few users ever used custom instances, this had minimal effect.
Thus, if you are interested in the Cronos type family, the Cronos Pro OpenType CFF fonts should meet your needs, especially since it supports many more typographical features than the original Multiple Master version. Is there anything that you think is missing from Cronos Pro?
With regards to your second question with regards to Cronos MM being free to download, just because you found something on the internet doesn't mean that it is true. Adobe has never released Cronos MM as a “free to download” product. If anyone is posting copies of the old Cronos MM fonts for “free download,” they are doing so illegally.
- Dov

Apply multiple master pages to multiple layers

I have a document that has multiple layer and I need to apply a different master page to each layer.
Layers are as follows and in this order:
     USA Pricing
     No Pricing
     Euro Pricing
     Yen Pricing
     and so on.
I have a master page created for each versions layer. I lock all layers except the USA layer and apply the USA Pricing master to that layer it looks great.
So I lock that layer and unlock the next layer and apply the applicable master to that layer and so on but, even though the other layers are locked what ever master
I last applied is the one that sticks to all layers.
How do you get the master page to stick to each layer without using the Master page override to each layer and making it become part of the page?
If you do that and then you have a change to the Master page on a specific layer/version you have to edit every page and can not simply make a global change on the applicable master!!
Thank you in advance for any help that can be given.

Do you mean that only one master page can be applied per page and that it is automatically applied to all layers of that page?
"so it sounds like you need to create a new master page with the attributes you need for each layer included in one place."
I don't understand what you mean by this? I have created multiple master pages that have everything I need on them to be applied to each layer!
They just don't stick to the individual layer! Maybe it the "included in one place" part of your reply that will work but, I don't understand what you mean by that!

Multiple Master Orgs

Similar Messages

Maybe you are looking for