Mx106 red led blinking issue

What does it mean if the red led of the dynamixel mx 106t keeps blinking... it was running just fine with a baudrate of 36 for 5 minutes... then the problem starts when the motor led starts blinking continuously....

may be your TA Unit is broken, you must flash a TA fix with FlashTool so your phone works again, make shure you've got your drivers installed correctly, and you aren't on windows 8.1 RTM/Preview (still not compatible) . Cheers

Similar Messages

Pearl Flip wont load - Red LED blinks twice, nothing on screen

My Pearl Flip refuses to load, and the only activity it shows is the red LED blinking twice every few seconds. I have tried the following
-tried reinstalling the two most recent versions of the OS using the Blackberry Desktop Software, but the installation hangs at the point of loading the system software
-tried using the application loader, however the installation hangs at loading the system software
-tried to use JL_Cmdr to wipe the device. As far as I can tell it did not wipe it (although it doesn't really provide any errors either)
EDIT: Should also say Ive tried all the above from multiple computers and using Win7 and XP
What other methods can I try to restore this device? I appreciate any suggestions that might be out there.
Thanks!
Scribs

Hey Scribs,
Welcome to the forums!
Have a look at this article for help reloading the software using loader.exe http://bbry.lv/9fsGPK If this method does not work you can try doing a reset to factory using the switch found in this article http://bbry.lv/dpNb1j
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

BlackBerry Z10 won't turn on and red led blinks 4 times

Hi all,
Yesterday my BlackBerry Z10 suddently turned off, I turned it on again and it worked fine for a few minutes (battery was around 90% full), then it turned off again and I couldn't turn it on anymore! The red led is blinking 4 times with a 3 seconds interval between each 4 blinks sequence. I tried to charge the battery, connect it to the computer, turn it on without the battery (with charger on), with no success. Sometimes, it shows the BlackBerry logo, or even the logo with the % loading, but then it turns off in the middle of the process, on random percentages.
Does anyone know what happened to the phone and how to solve this issue?
Thanks!
V

Mine keeps turning off... I called them and they told me to send the phone to Blackberry by mail to check what's wrong and that when the phone gets there, they do a complete evaluation and in 30 days they send the phone back... In other words, I have to buy another phone! Blackberry assistance is useless...

Red LED Blinks Twice

I havent used this phone for months and I just got it a new battery but the LED just blinks twice in a repetitive sequence. Whats wrong with it and is it fixable?

you could share what fixed your issue and resolve the thread (click on the Accepted Solution button on the right side of the post)
Dany_S New to the Community click here
Community Moderator

Sony TV KDL-60W840B Red LED is blinking 2 times and TV wont turn on

Hi, I have a Sony TV KDL-60W840B which I bought 13 months ago for the world cup soccer (gift for my husand). Now it is not working and like you can read in the subject line once the TV is plugged into a power strip the red led start to blink twice and pause, when I try to turn on it not do it. Please help me because it is not fear that just when the warrenty finished the TV is not working, and in fact I spent $2000 one year ago to have this issue. I really appreciate your help. Ana LuciaAB, Canada.

Hi aluva,
Welcome to the Sony Community!
If a Red LED is blinking and the TV is not working properly it means that the TV has detected an issue or problem. Most Red LED blink conditions require service. The meaning of the blink codes differs between TV models,
Please perform reset, visit the website below for the steps and further details.
https://ca.en.kb.sony.com/app/answers/detail/a_id/38403/c/65,67/kw/Perform%20power%20reset/session/L3RpbWUvMTQzODYzMjA0Ny9zaWQvQ1pPczkqc20%3D
Check out the website below for additional troubleshooting steps regarding lights are blinking on the TV.
https://ca.en.kb.sony.com/app/answers/detail/a_id/32192/c/65,67/?icid=home|banner3_ca_en|blinking%20light
If these articles do not resolve the issue, the problem is most likely related to an internal component that must be replaced and service will be required. Begin the procedure to send your Sony product into a Sony facility to be repaired.
If my post answers your question, please mark it as "Accept as Solution"

Q10 wont turn on. Red LED 1101111 blinking.

Hi All,
Just updated my Q10 to 10.3 via the carrier update and after half a day my phone turned off and now it wont turn back on again.
When I press the power button the yellow LED comes on and after that the red LED blinks in the following sequence 1101111.
Tried all the usual tricks. Battery pull, plugged phone in without battery, plugged into blackberry link, used original charger/cable, hold power button down for 10 seconds etc...All don't work.
Any ideas would be much appriciated

Hi and Welcome to the Community!
I cannot quite tell if you have done exactly this or not...apologies in advance if you have. Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
It is also possible that the OS update caused this. Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I wake up, I have email, but no flashing red LED!

Last night, I plugged the charger into my 8900, saw the clock displayed, and went to sleep. When I woke up this morning, I had 4 new emails and 2 text messages, but the LED was still blinking green, not red. Had I not looked at the 8900's screen, I would not have know there were messages waiting for me.
I searched the forums on this issue, and came across one post which said exiting the bedside mode by bypassing the clock application's "Exit Bedside Mode" option can cause this.
All I can think of, is that I might have set it to Bedside Mode (which turns off the LED) and then pressed the MUTE button to put it in standby. I remember seeing the message dialog box show up saying the phone was entering standby mode, but the message never went away. I cleared the dialog box by pressing the red End Call button. I think the phone may also have exited Bedside Mode at that time, or I may have manually exited it via the clock's option. My guess is that this is what caused the LED not to flash red after receiving messages. Unfortunately, I've been unable to replicate the error using this method, or any combination thereof.
Any ideas?

The blinking red LED blinks ONLY for about 15 minutes after receipt of a message or email. Unless you had received the email and SMS in the 15 minutes prior to your waking, there is no reason your LED should have been blinking.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red, what is this? it isn't in the manual

CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red in a pattern, red off then red red, Our AP isn't working it won't show up on our Cisco WLC 2125 anymore and this is the LED indicators, I've checked in the manual and this combination of LEDs do not exists??

No cisco web is working perfectly.
do you have a valid CCO id with smarnet contract ?? then only you can download new IOS for AP:
Autonomous AP image:
http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest
LAP AP image:
http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=280775090&release=12.4.25e-JAP&relind=AVAILABLE&rellifecycle=ED&reltype=latest
Regards

As described in the header, my Apple TV (120GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

As described in the header, my Apple TV (40GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

They stopped making that model four years ago. There is no way it is two months old. Trying connecting it to a computer with iTuens via a USB cable to see if you can re-install the firmware.

Wont turn on /blinking red led

Hi all, have my xperia z3 for about two weeks, not rooted, not unlocked, without any modifications. Yesterday before sleep it was with more than a half of akku, today as im woke up and got it in my hands it was off, im plugged charging cable, was thinking maybe the battery was drained, but nothing happens still, its just blinking red (led).
Was trying to hold power + volume up, nothing.
Reset key near sim dont works for me either - i'm just notice 3x vibrations and thats it, its just repeat vibrate 3x times again and again but nothing happens, no boot.
Solved!
Go to Solution.

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Red LED won't stop blinking after the phone turns on. Pearl 8100.

Ok, I have searched and read all over the net to find out about this, but nothing seems to compare.
My browser suddenly stopped to respond, and the buttons on either side of the trackball stopped responding while in the browser. This happend every time I entered the browser so I did a hard reset. Now the browser wroks fine, but...every time I turn the phone on, as it starts searchig for the network it will start blinking the red LED continuously and it only stops when I receive a call or a msg.
This obviously can't be right, but I can't find anything that appears to be wrong besides this....any suggestions?

That is certainly backwards. It should START not stop when you receive message or phone call.
Do this for fun Options > Screen/Keyboard > LED Coverage Indicator. Turn that off for now and see what happens.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Curve 9220 Won't Switch stuck On only red light blinking RED LIGHT! HELP!

my blackberry is stuck on red light blinking oleas help me no problem if all the data is lost i dont care i want my phone back it hase been 3 -4 weeks . light is blinking until the battery goes down and it wont charge also i have to get the battery charged by other phone plzz help mee........

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BB 8900 battery discharged, won't turn on, LED blinks 4 times, phone works with other battery

Hi,
battery of my BB fully discharged for first time since getting phone a few weeks ago
I plugged it into mains charger to charge it
first there is red LED light
then red LED started flashing 4 times
light stopped
a few seconds later 4 flashes again
and again...
device dead
no reaction on pressing or holding on-button
same story with USB charging
desktop manager didn't recognise device on USB port
(PC registers new HW BB...)
I tried with an another battery (same model, from other device)
everything works fine
I upgrade BB SW (using this borrowed battery)
and then tried again with 'old' battery
no sign of life
has anyone had the similar problem (4 times blinking etc.)
how to recover/charge 'old' battery?
any suggestion?
thx

Option, reload the software again, follow this link
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Red light blinks and phone dosen't get on

firstly my os crashed and faded away and the display turns black.then i reinstalled the o.s 10.3 and now red light blinks and the phone dosen't get on!!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
If it still continues to fail, then a forceful OS reload (via AutoLoader) would be my next recommended step.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red LED flashes continuously

I have the BlackBerry Bold 9650, it's a CPO purchased a year ago, used off and on till June, and has been my primary phone since June. Up to now it's been fine, and I've gradually added apps and goodies... Anyway, the last couple of days, it seems when I get a phone call my LED will flash red, endlessly. I cannot find a way to get it to stop short of pulling the battery, and my battery depletes quickly if I don't do this. **additional info - the touchpad becomes very sluggish as well, once I receive a phone call after a battery pull. This is getting to be a bit more than an annoyance, having to pull the battery after every phone call.
There have been numerous app updates the last couple of days too, and one was for BeBuzz, so I'm thinking maybe that's the culprit. It seems to be working normally though (the customized lights for contacts I have set do work) and I've gone through settings and don't see what it could be.
Anyone else have any ideas? Or a simpler/faster way to get that red LED to stop flashing? I checked all messages, emails, missed calls, etc and I cannot figure out what is making the LED blink so I can shut it off!!

MarquiaF_VZW wrote:
Hi SuzyQ! I'm used to you resolving everyone else's issues, (LOL, yeah, me too!) so I'll be more than happy to help you with your Blackberry. First, I just want to make sure you have the latest software version on your Bold, which was released 1/10. I believe that update was for the 9930 - I've got the 9650. I am running OS 6.0 and it says my software is up to date. If not, here are some options to manually download the update and also a list of the benefits of the update. If you do have the update already, do you notice this starting afterwards?
Do you have any missed calls, voicemails or new emails when this happens? No, I check all of those and cannot find anything I haven't opened or checked! That's the frustrating part - not knowing why that light is flashing so I can turn it off. Try removing BeBuzz to see if the LED is still flashing and keypad sluggish after receiving calls. I may just have to do that, though I'm using the paid version - I'll back up all my contacts first because I do NOT want to have to set them all up again. I don't get a lot of phone calls - mostly text and email, but it's annoying when it happens.
I have not seen any other reports of this issue. If the issue is still occurring after updating software and removing BeBuzz, then I suggest backing up the phone and completing a security wipe on the Blackberry. Would really rather not go there if I don't have to! Make sure to test making and receiving calls before restoring your data, to make sure no corrupt data is restored. I would recommend backing up just the important info like contacts, calendar, emails, etc.
MarquiaF_VZW
Follow us on Twitter @VZWSupport
Thanks for the response Marquia - I was just thinking it hasn't happened today, but then, I haven't gotten a phone call today either. So it may still be an issue. I think I'll wait a few more days and see if it continues to happen or if it was just a weird glitch. I really am enjoying the Bold, and this is really the first problem I've come up against! I'll let you know when / if it gets resolved and what works or doesn't work.

Mx106 red led blinking issue

Similar Messages

Maybe you are looking for