My ipod just shows a USB cord pointing to the iTunes sign. Ive tried to restart it but its says theres an error-3194. What do I do?
What do I do when the Ipod has a USB cord pointing toward the iTunes signal? I have tried restarting it but it says there an error #3194.
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
Similar Messages
-
My iphone rebooted and now it shows a USB cord pointing to the Itunes symbol
My IPhone rebooted or reset itself after trying to update, now it shows the USB cord pointing to the ITunes symbol. How do I synic it? What do I do?
Connect it to iTunes and upgrade or restore it.
-
HT4623 why is my iphone showing a usb cord pointing at a itunes button
I downloaded IOS6 update on my Iphone and now it only shows a usb cord pointing at a itunes button, what do i do?
I have plugged it into the computer and done a restore and it gives me an error. It will not restore. What is the next step.
-
After I tried to update my iPod 4 to iOS 5, my screen turned to the USB cord pointing to the iTunes symbol. When I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and I did download the latest version of iTunes (11.1.1). I tried to restore it again and the same error occured. I dont understand half of the instructions for the resolution of the 3014 error code so I did the instructions that I understood and nothing has changed. Please tell me how I can fix it.
Just what do you not understand?
Did you try:
Try to restore from another known-good computer and network.
Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My screen shows a USB cable pointing to the ITunes icon. What is my next step? I can't do anything from there on.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I upgraded my iphone and now all i can see on my phone is a white usb cord pointing to the itunes symbol what do i do. I have signed to itunes but nothing is happening my phone will not come on
The device is in recovery mode. See this support document for instructions. http://support.apple.com/kb/HT1808
-
Hi there,
Can someone please help. My IPhoneS stopped working right after I did the latest update which was yesterday. Now, the phone does not work at all. When turned on, the screen shows a picture of USB cable pointing to the ITunes logo. I have tried just about everything, and cannot get it working. It's like it is frozon. My ITunes does not recognize my device. Cannot dial out either. I desperately need to get it working. Can someone please help me.
Thanking you in advance for your help. :-)The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network. -
I reset my iPod...now it won't do anything. It has a USB cord with an arrow pointing at the itunes music note. I assume I need to download it back to the iPod but I can't figure out how....
YOU SIR ARE STUCK IN A BOOT LOOP XD ok I have to easy fixes for this!
Fix 1- go to iTunes and restore your iPod
Fix 2- plug it into the computer and wait for the noise then hold the power and home button down hold them down for 10 seconds on the home button and 15 seconds on the power then it should shut off and make a noise then turn back on to the lock screen. -
My phone is just showing a usb cord pointing to itunes
when i turn the phone on, All it shows is a screen of an USB cord and an arrow pointing up to the Itunes symbol.. I tried restoring the phone and it keeps saying it failed.
http://support.apple.com/kb/HT1808 see link.
have you plugged your phone to your PC and see what itunes says, looks like you have to put the phone in recovery mode. -
I need this to work...my daughter is going crazy without it...any other suggestions???
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I Checked my network, it is working properly. I tried unplugging the Apple TV. It's still showing the USB.
That image means you need to do a restore. See Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support for more details.
You will need a USB cable with a micro-USB connector on one end. -
My ipod touch has frozen! Will only show a USB cord pointing to "itunes" CD symbol. When I try to plug it in, my computer says that it cannot recognize my device due to malfunction. Tried to reset the ipod twice, but didnt change anything.
- Try another cable as yu siad
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help
http://support.apple.com/kb/HT1808
-
i
SCREEN IS LOCKED WITH A PICTURE OF THE USB CABLE POINTING TO THE ITUNES SYMBOL
You need to put the device in recovery mode...
iPhone and iPod touch: Unable to update or restore -
i need help. i tried updating the software on my ipod touch, and it looked like it was working fine, because it said "verifying update", but suddenly the screen went black and when i tried to turn it back on, it only had a picture of a usb chord pointing to the itunes icon. what do i do?
Your iPod has dropped into Recovery mode. You'll need to restore it via iTunes on your computer.
http://support.apple.com/kb/ht1808
Regards.
Maybe you are looking for
-
I use three read waveform nodes to read data from three channels of oscilloscope. The data of each channel are 1D array, and I use build array node to change them into 2D array. It can work well now. When I want to continuously reading data, I put th
-
Improve performance on specific PL/SQL code
In these three querys there are identical "select" statements in the "where" sections of the querys. SELECT sum(num_tit_par) INTO posicion FROM posi_hoy_rbo WHERE fec_pos = fecha and enti_cli in (select cod_int_ent from enti_rbo where enti_efe = enti
-
Incompatible software list for Mountain Lion
Is there a list somewhere of incompatible software? It would be nice to know BEFORE Mountain Lion is installed.
-
I have a 10.8.5 and need iphoto 9.whatever to order photo books but can't upgrade iphoto or the os unless I get a new computer is there a work around? Thanks John <Email Edited By Host>
-
Hi all I was wondering if anyone could offer some help on a problem of mine I have a GUI with a button (labeled start), when its clicked it starts an infinite loop that is stopped by the same button (obviously after the first click the text changes t