N8 - Sleeping screen won't work after upgrading to...

I upgraded to Belle last night on my N8. It went smoothly but a lot of my apps disappeared, including Nokia sleeping screen. (which is the one I'm most missing so far)
I re-installed the latest version of sleeping screen from the Nokia Store, but when I go into screensavers to try to activate it, all that happens when I cllick on if, is the loading animation pops up for 1/10 of a second, and then nothing, the seletion tick statys next to the previouos screensaver.  If I long tap it to get the popup window, nothing happens when I select settings, and when I select preview I just get a blank screen.
Is there anything I can do to try and fix this? I'm not completely averse to doing a full factory reset, but for obvious reasons would rather leave that as an option of last resort.  I've already tried the old switching off and on routine... and un-installed re-installed etc.
any help greatly appreciated! :-)
Solved!
Go to Solution.

FYI,
I have tried the same routines ( remove & reload & reinstall & even that "wait until double vibrations" start ) AND that did not change my prob:
- the app is loaded and shows in list of installed apps when checking from installations menu BUT
- the app is not listed in applications ( and thus cannot be started at all );
IMHO: returning to factory setup is really NOT a solution if you have already reinstalled and fine tuned everything else to your liking! ... just think about it logically: if EVERY ( or even every second ) app needed returning to a factory setup, nothing would really work.
Please DO NOT suggest this is solved - until a better solution is found I give up the app, which worked fine in same N8-00 & Anna.

Similar Messages

  • ICloud email won't work after upgrade

    iCloud email won't work after upgrade to Mountain Lion.  Says pop 3 server is timing out. Solutions?

    I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
    My problem is TWO FOLD.
    The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
    Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
    There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

  • Mail won't work after upgrade to 3.0

    I cannot get my Mail program to work after upgrading to 3.0. It starts, searched for new mail, then quits. I cannot get or send new mail. The program does not operate. Suggestions, please?

    I get the exact same thing. The status just keeps showing "Connecting..." and it never seems to connect. Oddly enough, I just updated to the new OS on my iMac at home and immediately after, I couldn't connect to mail from the computer. I had to manually download a component of the update and once I did that, mail worked just fine. Probably just an odd coincidence having nothing to do with the mail issues on the iPhone but I thought I'd mention it.

  • Itunes won't work after upgrading to Mac os x 10.7

    How can i fix itunes, it won't open after upgrading to Mac OX lion??

    Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
    Crashed Thread: 7
    Thread 7 crashed with X86 Thread State (32-bit):
    eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
    edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
    ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000044
    Will attempt your suggestion.

  • HT204350 scanner won't work after upgrade

    scanner won't work after upgrade

    Hey srohall,
    Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    5. Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    1. Reset the printing system, then add the printer again.
    2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    3. Contact the printer vendor or visit their website for further assistance.
    Thanks,
    Matt M.

  • My itunes store, app center, safari and mail won't work after upgrade

    I am very dissapointed in the new maverick upgrade. My app center, itune store, safari, and me mail won't work with the new upgrade. I called the help desk and they had me uninstall and re install the upgrade. he said i should have everything backed up cuz I will lose everything, but nothing was lost. It worked for a day, but now it doesn't work at all. it just gives me the hourglass circle symbol and finally times out. A couple of times  my computer gave me an error code that i wasn't connected to the internet, even though I could use chrome no problem. Another error code I got was that I wasn't signed in, but I am. Any suggestions?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

    I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
    When I take a screen shot, the picture shows that both displays appear clear (and in color).
    Am I missing something? Thanks in advance for any suggestions

    so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
    the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
    I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
    why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
    the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
    under 10.2 there were less stringent requirements for driving video.
    OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
    I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
    hopefully someone else will run by this topic and offer some insight aside from my own.

  • Sd connector won't work after upgrading to ios8.1

    after upgrading to iOS 8.1 my official lightening SD connector won't work, when I plug it in it says " cannot use device sub storage: the connected device is not supported"'is anyone else having this problem if so how to fix it, my sd connector worked fine when I was on ios7.

    Same here, I have an iPhone 5s and it is really frustrating, all news app, twitter, whatsapp have stopped to Push any notification unless my device is awake !! only emails are fine - once I awake the iPhone, dozens of notifications pops up which make it really hard and annoying to read and follow !!!!
    Please advise!!
    Noting that i have tried to reset settings, backup and restore, install all updates....etc nothing worked !!

  • HP C7280 Solution Center won't work after upgrading to Windows 7

    I was running Vista and connected to the C7280 both wired and wireless. Last month or so has been wireless with no issues.
    I upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says "An unsupported operation was attempted" that pops up twice, then I get an error that says "An invalid argument was encountered".
    Then a pop up window gives some steps to try to fix the problem.
    I downloaded and installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which didn't work.
    I then removed the printer from hardware, and uninstalled the Solution Center software,
    Re-installed driver  PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 driver package and
    installed dot4patch_reboot.exe,
    shut the printer down, unplugged it for a few minutes, rebooted the computer, and
    the same errors occur.
    The driver is a year old, and I can't find a newer version.
    Released:
    2009-10-20
    Version:
    13.1.0
    The patch is a few months newer but it didnt help either.
    » HP Print Software Patch When Upgrading Vista to Windows 7
    2009-12-06 , Version:1.0, 1.22M
    This Windows 7 patch fixes some printer functionality after upgrading Vista to Windows 7. For networked printers, please go to www.hp.com for more support information.
    Any help is appreciated.
    This question was solved.
    View Solution.

    Finally got this problem fixed. No Thanks to HP Support
    I installed the software for an HP Photosmart Premium C410 series and it corrected whatever problems I had with the HP Solution Center scanning  problems in the C7280 printer software.
    Go Figure ......

  • Screen rotation doesnt work after upgrading to lolipop

    After upgrading my phone to lolipop the auto rotation doesnt work even in the safe mode

    @alahmed
    Repair your phone with PCC and report back
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Really tired of screen sharing not working after upgrade to 10.10

    I have tried everything I can think of but I simply cannot get screen sharing to work any longer when I am not within my home network.
    I NEED this to work.  Anyone else having huge problems getting screen sharing working when away from their home network?
    Anything at all I can try at this point?  Sometimes the share screen button doesnt even show, sometime it does and then says it cant
    come up, sometimes my mac at home doesnt even show up in the Shared sidebar area. 

    I've had lots of issues with my Macs picking up new names eg. 'iMac (2)' instead of 'iMac' which led to sharing issues (screen sharing, AFP etc).  I've set up new DHCP IP reservations on my router (Time Capsule) in the hope it will stop happening.

  • Epson stylus cx 3800 won't work after upgrade to osx 10.9

    I installed OS X 10.9 on my MacBook Pro and now my printer Epson Stylus CX 3800 won't work. I uninstalled the printer and tried to reinstall with original epson software but computer won't download it. Perfectly good printer worked yesterday but not today. Any suggestions would be appreciated.

    Hi ,
    I had the same problem , But i fixed the issue by updating patch . Hope this link can help you for all version
    as this has patches and explained
    http://news.idg.no/cw/art.cfm?id=297D2650-EC09-00A1-048BD74750266743

  • TX2616au touch screen doesn't work after upgrading to windows 7

    Hi,
    I just got my TX 2616AU multi-touch tablet few days, it came with Windows Vista ,and the WACOM touch screen worked perfectly, by the pen and my finger as well.
    I got a Windows 7 Ultimate and decide to upgrade the system. The upgrading process was all right, after the upgrading everything worked fine but the touch screen. It didn't response my finger-touching any more, worked with the pen but the pen was running crazy.
    So I downloaded and installed ALL drivers for Windows 7 from HP website for this model tablet, everything looked fine but the problem's still there. I searched internet and followed some advice, downloaded the driver from WACOM for Windows Vista and installed it, it reported a error, gave me a BLUE SCREEN then restarted and then the pen got back to normal, thanks GOD! But it still refused to response my finger-touch, Im out of idea...
    Any suggestion would be appreciated!
    Ted

    Hi
    I think the Flash Card support Utility and the Value Added Package would solve the issue but Im not quite sure if the links posted by Jeka are right
    Please visit the Toshiba European driver page and choose your notebook model.
    Then download the Flash Card support Utility and the Value Added Package for Win 7 64bit!!
    Ensure that VAP should be installed at first and then Flash card support utility

  • Itunes won't work after upgrade

    ok, i'm an idiot and upgraded to itunes 6.0. before today everything was working great, then after the upgrade itunes won't open anymore. any help would be great!!!

    I am having the same problem - if anyone knows what the problem is I would appreciate it.

  • Word of the day screen saver not working after upgrade?

    anyone else having the word of the day/dictionary screen saver not pop up anymore after the upgrade?

    Yes, precisely. The crash of "word of the day" cannot be related to the Lion upgrade. Some other issue must be at fault. And to clarify and be specific "Apple" did not say it was not supported but rather one person working in customer support said "word of the day" was not supported - and since some of us Lion users having the screen saver work and only just now failing, that one person at Apple seems to have made an error in guessing what the problem is. Why keep discussing this? Because "word of the day" is a useful screen saver in an educational setting and it is worth the effort to fix it and restore it as a screen saver option. Hoping there is a fix soon.

Maybe you are looking for