Need configuration exmamples for 3560 small network

Hello,
I'm currently doing some lab exercises in Packet Tracer.
I'm trying to setup a small network with 2x 3560 switches and 3 vlans. 1 vlan for network management, one vlan for servers and one vlan for users.
I'm running into issues where my lab exercises don't seem to work properly, and i'm not sure what im doing wrong. I learn fairly well "by example" and was wondering if anyone can point me to some examples of such a setup.

further, here is the layout of my lab and the packet tracer file.
here are the configs of my 2 3560. i've cut out ports no important to the lab
CORE 3560
Current configuration : 1399 bytes
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
hostname CORE
ip routing
no ip domain-lookup
interface FastEthernet0/10
switchport access vlan 10
switchport mode access
interface GigabitEthernet0/1
description link_to_closet_switch
switchport trunk allowed vlan 1,10,20
switchport mode trunk
interface Vlan1
ip address 192.168.1.1 255.255.255.0
interface Vlan10
description server_vlan
ip address 192.168.10.1 255.255.255.0
interface Vlan20
description user_vlan
ip address 192.168.20.1 255.255.255.0
ip classless
============
CLOSET 3560
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
hostname CLOSET
ip routing
no ip domain-lookup
interface FastEthernet0/10
switchport access vlan 20
switchport mode access
interface FastEthernet0/11
switchport access vlan 20
switchport mode access
interface GigabitEthernet0/1
description link_to_core_switch
switchport trunk allowed vlan 1,10,20
switchport mode trunk
interface GigabitEthernet0/2
interface Vlan1
ip address 192.168.1.2 255.255.255.0
interface Vlan10
description server_vlan
no ip address
interface Vlan20
description user_vlan
no ip address
ip classless
line con 0
line vty 0 4
login

Similar Messages

  • NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

    Hello -
    I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
    Here are the network components - someone please tell me how to set this up:
    PC #1 (has wireless card, but I've connected it by ethernet to the router)
    PC #2 (no wireless card; connected via ethernet to router)
    MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
    AIRPORT EXTREME BASE STATION, Model A1143.
    I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
    I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
    ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
    my question is this:
    Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
    Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
    And help anyone can provide will be much appreciated!
    Thanks,
    Em

    from the Airport FAQ #14:
    "Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
    Answer: No. The USB port is for connecting a printer, not for other devices."
    Im assuming other devices include USB modems.
    So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

  • Advice on moving from workgroup to domain for very small network

    Hello all,
    I work for a small company and inherited the part time IT/Operations position and I want to understand the impact of changing from workgroup to domain.  I understand the process and I have set up small test domains before but I want to be certain I
    understand this so I figured I better ask the pros.
    The setup:
    1 Desktop class system, recent i5 quad, 16GB RAM, 1TB HD with Server 2008 R2.  Current roles are File Sharing and WSUS. 
    3 Desktops running Win 7 Home
    1 Desktop with win 7 Pro
    1 Laptop with Vista Home
    1 Laptop with Win 7
    1 Laptop with Win 8 Pro
    I have configured all devices to uses the WSUS for updates as they wanted these managed and this seems to be the easiest way.
    Right now all users have an account on the server that is used to map to their shares.  I know that the home versions cannot join to a domain and with this small of a network I don't want to join any device to a domain as we have only one server and
    it would not be reasonable to add more servers.
    The thing is they want to setup local sharing of calendars and contacts, etc.  I have 2010 exchange server and it is required to be on a domain.
    The Questions:
    Can the domain still "act" as a workgroup and users still connect to the shares and exchange without being joined to the domain?  What is the impact on performance for this server?  Will the home version users still be able to connect to
    the shares (I assume yes) and to the exchange through outlook?  Is there a better way to achieve the workgroup features of exchange without using exchange and not subscribing to Office 365?  We do not have an internet domain name for this business.
    Does this matter for setting up a domain?
    Anything you can think of that I should consider please feel free.
    Thank you all for your advice.

    Hi Paul,
    You are very welcome, I am very glad that my suggestions helped.
    For your first question, in a domain, the Domain Controller clearly has much more tasks to perform than a work group server, while it also has more management options for an administrator to better control his/her client machines.
    In addition, domain acts as a central management solution will reduce the work of the administrator. For an example, under workgroup mode, if we have multiple servers which have shared resources, we need to create the same user
    accounts on each of them, while in a domain, we only need to create accounts once on the DC, then all the accounts can be recognized across the whole domain, no matter how many servers and client machines are within it.
    For the second question, yes, single lable domain name is not recommended, but it is allowed. Single lable domains are supported in
    Exchange Server 2007 Service Pack 1 (SP1) and Exchange 2010, while single label DNS name resolution is also possible.
    However, there are other Microsoft and third-party products which don’t support
    single lable domains. My suggestion is don’t use it while it will cause you trouble.
    More information for you:
    Single-Labeled Domain Names and Exchange 2007 SP1
    http://technet.microsoft.com/en-us/library/cc788134(v=EXCHG.80).aspx
    Microsoft Exchange compatibility with Single Label Domains, Disjointed Namespaces, and Discontiguous Namespaces
    http://support.microsoft.com/kb/2269838
    Help and support for namespaces in Microsoft products including Single Label Domains (SLDs), Disjoint Namespaces, and Discontiguous Namespaces.
    http://support.microsoft.com/gp/gp_namespace_master#tab3
    Providing Single-Label DNS Name Resolution
    http://technet.microsoft.com/en-us/library/cc816610(v=WS.10).aspx
    Regards,
    Amy

  • Advice for Building Small Network Question

    Hello,
    I am building a small network environment which will connect to a larger office, scalability is important.  We will begin having about 30 users which will all need VOIP services.  The VOIP services will be hosted by a cloud provider.  My question is as of now I am looking to obtain a Cisco 2921 ISR Router and then a Cisco 2960-X 48Gig POE, and my main question is I am confident the switch can handle the power and operation of the phones but just to make sure I should not run into any problems with the router as far as forwarding the data, correct?  Any other comments or suggestions would be appreciated.
    Thanks,
    Joe

    Duplicate post. 
    Go HERE.

  • Cannot install APN configurations profile for H2O data network

    I am helping a friend of mine with his new unlocked iPhone he got from apple. It is not Jailbroken. In order to get to the data network, he has to install a profile to setup the APN configurations. The phone refuses to install because their can only be one APN configurations profile at a time. This issue should be solved by removing any old profiles that may cause the conflict. The problem is that there are no other profiles installed on the phone at all. In fact, I couldn't even make the profile option show up before installing another profile.
    I read in the internet that sometimes, if you update your phone the system may hide any old profiles it doesn't like. Is this true? If it is, is there away to remove the hidden profiles without doing a full reset to the device and wipe everything I have in there?
    iPhone 4 with iOS 4.3.2

    Hello,
    you don't need to sign the MDM profile with the APNS-certificate, and to my best knowledge you shouldn't even do it. The APNS-certificate is solely for the purpose of authenticate the MDM-commands your server sends to Apple's Push notification service.
    The installed MDM-profile on your device can be unsigned or signed with a SSL-webservercertificate from one of the trusted standard-CAs like Verisign or Thawte.
    You should make sure that your MDM-server either delivers it unsigned (which is failsafe and works) or upload a trusted SSL-certificate (together with the private key, usually in .PFX-format) for this task.
    One of the initial obstacle in Apple-MDM is to understand which classes of certificate are required and to understand their respective purpose.
    Best regards,
    Detlev

  • Need configure guide for job progress monitor in JSM

    Hello Guys,
    I have received  an requirement to setup job progress monitoring in JSM(job schedule monitor).i have done my search in Google for configuration guide, but i could not find it.
    My Requirement:- i need to monitor the jobs progress(running on manage system) which consists on nearly 10 setps.End user need to monitoring the job progress  using PI diagram.
    Guys  if any one of you have done this setup please help me with configuration setps.
    Please provide your inputs on this.
    Regards,
    Pavan

    Hi Pavan,
    That should have been my place from where I would have start
    I hope Jansi, Prakhar or Karthik can redirect you on this.
    Meanwhile, If I get any thing, I will share it.
    Regards

  • Need configuration guide for EAP-TLS

    I need to setup the AP-1200 I have for EAP-TLS. Anyone know of some good documentation that I can use to configure this? I already have the CA and RADIUS servers up and going.
    Thanks in advance for your help.

    Here are some docs that I used when setting up EAP-TLS with my Cisco 350 APs and Cisco 340/350 wireless client adapters. I made notes in them but they were derived from Cisco support originally. I've found that Win2K clients have more trouble with authenticaion because they must have the 802.11x engine installed (MS update/hotfix) which I've found only can be installed on clients running SP3 (not SP2 or even SP4). Kinda weird. Anyways, you'll probably have the best luck with XP clients because of its native 802.11x support that's built in.
    Hope that helps...

  • Need Configuration Setting for Invoicing

    dear Gurus,
    the scenario is we have ordered 3300 bags in no.(ordering unit) but actually the bags are delivered by the vendor in KG(delivery unit).
    we have set the conversion factor as 4 Bags = 1 kg. The bags are in Bales ie 1 Bale = 300 Bags. Now each bale has diffrent weight.
    now the actual weight of 11 Bales is 805.100 Kg. But according to the conversion factor , it is 825 Kg.
    The vendor is charging for 805.100 Kg but in the system it is calculating for 825 Kg.
    How we overcome from this???
    If any more clarification needs ,let me know  plz.
    best regards,
    rajesh
    Edited by: rajeshkumar chauhan on Dec 1, 2008 8:54 AM

    In MIRO, system will default order prince unit as 825 Kg according to conversion factor in PO but you can
    overwrite manually this order price unit value as 805.100

  • Need Configuration example for DS-LITE ( Tunneling IPv4-IPv6)+NAT44.

    Hi,
    I need to understand DS-LITE with configuration example. Can anyone please help me out?
    Regards,
    RA

    Hi Rahul,
    DS-Lite is only supported on the CGSE in CRS and on the ISM in the ASR9k. Here is a sample config that might help you to understand.
    RP/0/RSP0/CPU0:router(config)#
    interface te0/0/0/0
    ipv6 add 2001:db8:ff00::1/64
    interface te0/1/0/0
    ipv4 add 192.168.100.1/24
    interface ServiceApp61
    ipv6 address 2001:db8:1::1/64
    service cgn demo service-type ds-lite
    interface ServiceApp41
    ipv4 address 192.168.1.1 255.255.255.252
    service cgn demo service-type ds-lite
    service cgn demo
    service-type ds-lite dslite-1
    map address-pool x.y.z.0/24
    aftr-tunnel-endpoint-address 2001:db8:ffff::1
    address-family ipv4
       interface ServiceApp42
    address-family ipv6
       interface ServiceApp41
    router static
    address-family ipv4 unicast
    x.y.z.0/24 ServiceApp42
    address-family ipv6 unicast
    2001:db8:ffff::1/128 ServiceApp41
    regards

  • Needed configuration steps for sales operations and planning...............

    hi,
    sap gurus,
    good morning to all,
    my client says that on papers our target vs achievement is fixed that is for day wise, week wise,
    month wise and quarterly wise, 6 months wise and finally yearly wise.
    but
    when it comes to practical scenario, if delhi sales are booming like any thing and agra sales are
    falling then the material fixed for sending to agra will be turned to delhi and already delhi's target also
    will be there.
    some experts is saying we cannot have SOP here because we have tentative planning on papers and
    noting is fixed.
    suggest me on this because i am confused because some says that SOP is possible and some
    says that SOP is not possible.
    and also i am expecting better solution for this.
    regards,
    balaji

    hi,
    sap gurus,
    good morning to all,
    my client says that on papers our target vs achievement is fixed that is for day wise, week wise,
    month wise and quarterly wise, 6 months wise and finally yearly wise.
    but
    when it comes to practical scenario, if delhi sales are booming like any thing and agra sales are
    falling then the material fixed for sending to agra will be turned to delhi and already delhi's target also
    will be there.
    some experts is saying we cannot have SOP here because we have tentative planning on papers and
    noting is fixed.
    suggest me on this because i am confused because some says that SOP is possible and some
    says that SOP is not possible.
    and also i am expecting better solution for this.
    regards,
    balaji

  • Can I have multiple versions of Firefox? I'm running 3.6, but need 3.0 for a virtual network which requires a plugin not compatible with 3.6.

    I don't want to lose 3.6, but have 3.0 available for this one application.
    thanks!

    Easiest is to install a portable Firefox 3.0.x version. The portable version uses its own profile and that way you do not have to make sure that the 3.0 version doesn't use the Firefox 3.6 profile.
    You can do a custom install of the Firefox 3.0.19 version, but then you have to make sure that you do not start the Firefox 3.0 program after installing and first create a new profile for that version and create desktop shortcuts to start each version with its own profile to avoid corrupting files in the profile folder.
    See:
    *http://kb.mozillazine.org/Profile_Manager
    *http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    *http://kb.mozillazine.org/Shortcut_to_a_specific_profile

  • Best DSfW Design for new small Tree

    I looking to build a replacement tree and server infrastructure for a small network, 80-90 users at a single location, with the possibility of adding 1 or 2 additional locations in the future. I want/need to make it as Active Directory friendly as possible for use by Microsoft SQL Server and VMware View. The current tree structure is O=parent company down to OU=company down to OU=city and then OUs for each server (file, print, and email) and OU=users for users, groups, profiles, and templates.
    Ex: someuser.users.moosejaw.rocketpacks.acme for a user. fileserver.moosejaw.rocketpacks.acme for a server OU.
    My question is do I do a name-mapped install or a non-name-mapped install for maximum AD compatibility, I can design the tree however best suits the task so whichever approach makes the most sense works for me.
    Oh, FYI, fully virtualized infrastructure VMware vSphere 5.1, single purposed virtual servers for each task, DsfW, File, Print, SQL, etc...
    Thanks,
    Tracy

    tcarlton sounds like they 'said':
    > Well since its a new install I could install DSfW first as a
    > non-name-mapped tree or I could install DSfW later in the process
    > AFTER having built a �Traditional� eDir tree instead. My
    > question is, given the environment, which is a better approach, if
    > any, and what are pitfalls of each approach.
    So my response to tcarlton's comment is...
    Hmmmm, well if your current tree makes sense to all involved, might be
    just as easy to do a name-mapped install at your parent company level.
    With OES11, your DSFW domain can span multiple partitions, and this way
    all your users, etc would be in your domain.
    Stevo

  • Status Profile: Configuration required for authorisation based on user

    hi friends
    from the sale order , i configured the status profile for authorisation for release the item level .
    so what i do for cofiguration to give authorisation particular user(manager) and also not required for user(end user)
    with regards
    dinesh
    Edited by: code acess on Feb 28, 2011 6:22 AM

    hi ram
                     thanks, how i give authorisation for particular user.. i need configuration setting for authorisation. i dont know what i tell to Basis for authorisation.
    Consultant
    with regards
    dinesh

  • Configure SAP for server-side trust

    Hi all,
    I am installing BusinessObejcts XI integration for SAP Solution. I need configure SAP for server-side trust. I have read BussinessObjects XI Integration for SAP Solution Installation Guide. In chapter 6, It introduce how to configure SAP Server-Side trust. But I don't understand how to configure SAP for server-side trust, specially configure SAP Cryptographic. Would you please to give me more detailed explanation?
    Please advise,
    Duypm

    Hi Duypm,
    the SAP server side configuration is part of the Installation Guide Chapter 6. It starts on Page 94.
    If you unclear about this and what SNC configuration means for the SAP server make sure you talk to the administrator for the SAP system. You need administrative rights for the SAP system and the system will have to be restarted as outlined in the installation guide
    Ingo

  • Configuration guide for ASA Ipsec.

    Ho guys.
    I need configuration guide for ASA Ipsec using Cli.
    Thank you.
    Sent from Cisco Technical Support iPad App

    Hi,
    please check the below link
    http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b4ae61.shtml?referring_site=smartnavRD
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml
    Thanks and Regards,
            ROHAN 

Maybe you are looking for