Need guidance for using EEWB

Hi Friends,
I have created a project in transaction EEWB.
Then i have created an extension, in the extension i have given following details
1. Business Object : BUPA.
2. Extension Type : ADD_NEW_FIELDS.
Then i had started wizard , maintained some fields as per the requirements and completed the processes.
Now i can see the TASK where in I can see the details of the newly created DDIC objects.
Is there anything else i am supposed to do apart from these steps to view newly created fields?
Please help me.
Reward points guaranteed

Sohit
   Have you saved the Projects and Extension on the Transport Request ?
   Also try to re-generating the same !
   <a href="http://help.sap.com/saphelp_crm50/helpdata/en/81/1d5303c023da438e792316c9d25a84/frameset.htm">Post Processing</a> needs to be done
Thanks
<b>Allot points if this helps !</b>

Similar Messages

Forgot icloud password, how to get it recover without any question and also alternative email becuase someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

forgot icloud password, how to get it recover without any question and also alternative email because someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

I'm sorry, but I know nothing about iCloud email. I stayed away from iCloud email and only use iCloud for limited purposes.
But take a look at this discussion and read the response from randers4. He is one of the iCloud experts in the Apple Support Communities.
https://discussions.apple.com/message/24358339#24358339
If that doesn't help, you might be better off posting in here where there are other more knowledgable iCloud users.
https://discussions.apple.com/community/icloud/icloud_on_my_ios_device

Need guidance for setting up distribution list

I have OD setup, I have Mailing Lists setup for groups such as IT, Marketing, etc.
The only thing I have not quite figured out is setting up distribution lists for outside senders that can be distributed to LDAP users in OD. I have been searching the forums and have found bits and pieces of data, but cannot yet locate any guidance for getting this setup.
I thought that this would be handled in the /etc/aliases file, but it appears that this only applies to local users.
If someone could point me in the right direction, I would be grateful.

I understand that more than 15,000 photos in a catalogue will degrade Lightroom's performance
100% incorrect false misleading don't listen to this nonsense, people in this and other forums have over 1/4 million photos in a single catalog
I am concerned that several catalogues will be confusing about which catalogue a specific image is in.
Very smart!
What guidance can someone suggest for creating and organizing multiple catalogues?
Use a single catalog, and move towards keyword/caption/metadata organizing rather than folder-based organizing (as much as can practically be done given the time constraints in your life)

Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?

Any suggestions for using Symbol's scanner/terminal with Oracle 10.7 and/or 11i? The symbol unit runs a telnet session (with a 1/4 viewable area). I'm looking for some alternate screen templates and/or a software solution that will allow me to remap the existing full screen forms so all critical information is displayed on the symbol unit in the allowable viewing area. I understand that version 11i of Oracle Apps does not support character-based telnet sessions, so I'm also interested in a fix that will be transparent to my material handlers when we upgrade from 10.7 to 11i. Any help would be greatly appreciated.

Hi
We are developing solutions in that area.
If we can know more of the exisitng solution you have implemented or PDA and how it is integrated with Oracle Application(whether it is a third party tool?)
then we can discuss about arriving at a solution.
My mail-id is [email protected]
Thanks and Regards,
Bibs

Need support for using my bb classic

I am not a technical person and need support for my bb classic I sign up for the support with rogers and they have no clue on the bb Are there any experts out there that can provide support I am wiling to pay In the ideal world I woud like someone in the toronto area

Have you looked through the built-in Help app? It's pretty comprehensive. As an experienced user, I often find things in there I don't know.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I need instructions for using my HP Photosmart D5345

I need instructions for operating my HP Photosmart D5345. I lost them.

Hi Tigger59,
Here is a link to the online manuals for the HP Photosmart D5345:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&jumpid=reg_r1002_usen&lc=en&product=3...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I need guidance on using an i-pad with older people

I represent a UK Charity that is considering rolling out the use of i-pads to older people who attend day centres so that when they are at home they can access, very easily, information about local services, activities, friends, family etc. I have so far concluded that an i-pad with a mobile contract should allow them unfettered access the Internet thus information and e-mails. It would not need another computer to piggy-back on nor a wireless router. Applications specifically tailored to older people who are living alone. I would like some guidance on the realities of persuading older people that the i-pad is not a 'computer' but merely a window to the world. I would welcome guidance on how to set up such a roll out programme, costs, pitfalls, unexpected advantages etc.Help !!?

JohnPW wrote:
I represent a UK Charity that is considering rolling out the use of i-pads to older people who attend day centres so that when they are at home they can access, very easily, information about local services, activities, friends, family etc. I have so far concluded that an i-pad with a mobile contract should allow them unfettered access the Internet thus information and e-mails. It would not need another computer to piggy-back on nor a wireless router. Applications specifically tailored to older people who are living alone. I would like some guidance on the realities of persuading older people that the i-pad is not a 'computer' but merely a window to the world. I would welcome guidance on how to set up such a roll out programme, costs, pitfalls, unexpected advantages etc.Help !!?
I would try a few iPads first, may work for some just fine, others likely not at all.
Some of the drawbacks of the iPad for some seniors I've found are as follows:
1: can't scale the UI for their poor eyesight
2: touchscreen issues with colder fingers
3: UI has a lot of hidden and not clear cut references, lots of guessing, harder to learn
4: difficult to hold, no mouse, having to raise their arms to use, fragile device easily dropped.
5: some sites they use are not compliant, or use plug-ins the iPad can't use, like historical records, government sites and such designed for a desktop OS and a mouse pointer
Believe it or not, I've found Windows XP to be the best for seniors as they have had the most familiarity with it, but adopting to Windows 7 themed as close to Windows XP to be the most trouble free on newer machines.
Your results may vary and your learning level of the seniors you work with may vary.
Usually the ones are active will go out and buy their own iPad or computer they like, however with shut-ins your likely looking at doing everything for them and they are more interested in your company and may only feign interest. You'll find out the iPad is only being used while your there.
If you really want to help them, then give them something as close to what they already know how to use or others can assist to take the workload off you.
They mostly prefer a mouse, pointer and a keyboard over a touchscreen.
All I can suggest is s mixed approach, not all iPad and not all desktop computers, however you will find the desktop computers are considerably less headache, cost less , autoupdate etc., and break down less than a iPad.
You can set the desktop machine to do things automatically, it's always hooked to the power, the iPad needs to be charged, it needs this or that update and so forth.
Not knocking the iPad, and it can work for some, but likely not all.
I know as a young person it's tempting to think a lot of older seniors can grasp new technology as easy as the young, but a lot don't, it's a whole new different way of doing things and it's foreign to them, take them so long to learn they they don't want to bother.
So sometimes it's just better to give them something as close to what they already know, your trying to help them remain active, not torture them with every new technological gadget that magically appears on the market, is popular now but won't be 3 years from now as something newer is released.
You'll catch on soon enough who you can use a iPad with or not, unfortunatly a "organization" is thinking a global rollout, when a much more tailored approach is better.
I've hope I've made my point.
Good luck

BODS : Datastore options for SAP R/3 - need clarity for use

Hi All.
Another request to understand the datastore optiono n BOXI 3.1 BODS existing installation.
We are trying to pull a new table from SAP R/3 into BODS and we find that ABAP program is not getting generated as expected. And terminates. When we tested a simple workflow.
While creating a new datastore for SAP R/3 Source :
When we look at the datastore we find the following options for R3 Source ;
ABAP Execution option :
Execute preloaded
Generate and execute
Under data transfer method we find ;
Shared directory
Direct download
FTP
Custom transfer
Then we have working directory on sap server
local directory
generated ABAP Directory
Am testing a simple workflow of pulling data from SAP R/3 in a dev machine.
But am not understanding.
which option of ABAP Execution, and data transfer , path would work in co-ordination.
Because when i say direct download and say generate and execute it throws error.
Can anyone help me with combinations of the options to choose for a R/3 source. And the implications thereof.
I had created a folder under local bods server D:\Bodi. And given the path for data transfer.
But the files are not getting generated for whatsoever reasons.
Any advise on this would be helpful.
Also found a bit unusual, that there was no button to test the connection to be correct or not, a TEST connection button is not there. Which i felt, could be included.
Note : on the existing production system, we have chosen execute preloaded; shared directory on sap server. and shared that folder path for the user and given full rights. But while we try to do the same on the dev machine a test before transporting on production, a simple workflow does not work.
would like to know what settings on sap server, really affect the data store options on the BODS
thanks
indu
Edited by: Indumathy Narayanan on Jul 19, 2011 4:14 PM

Indeed, BODS <> SAP connectivity can be tricky.
For a development environment, I suggest you select the option "Generate and execute" for your "ABAP Execution Option." What this means is that DS will create, on the fly, small-ish ABAP programs. These ABAP programs will be written, in plain text, to a local directory on the DS job server, in the folder specified in "Generated ABAP Directory". You can see them in there after an attempted job execution, assuming the job involves the creation of an ABAP program. The ABAP program name is specified in the properties of an ABAP data flow, under Options > ABAP Program Name. If you can't, perhaps the DS job server process doesn't have full rights to that folder - ? After being generated on-the-fly, they'll be transferred to SAP to execute. The SAP user you use to connect to SAP must have sufficient rights to upload-and-execute these ABAP programs, and that's a fairly substantial set of rights. What's required is documented in the BODS supplement for SAP. Often, to get things running, your friendly local Basis admin will grant SAP_ALL to the DS user, to see what rights are being invoked.
Once all that jazz is working, you need to get the data back. There are a number of ways to do this. The method of data transfer is specified in "Data transfer method," where, ignoring "Custom transfer," you have three choices:
1) Direct Download: easiest and slowest. This method tells SAP to attempt to stick data in the client-side folder specified in "Local directory." Try this first.
2) Shared folder: This is recommended when you have SAP being hosted on a Windows box. Basically: you set "Working directory on SAP Server" and "Data Services path to the shared directory" to point to the same folder. SAP uses the "Working directory on SAP Server" to find this folder, and DS uses the other setting. So, for instance, if you were going to use the Shared folder method, you could set "Working directory on SAP Server" to "E:\BODS_Transfer", and, assuming E:\BODS_Transfer was shared-out as "BODS_Transfer", you could set "Data Services path to the shared directory" to
dev12.somecompany.com\BODS_Transfer . Then, you'd need to setup all the relevant security, as both SAP and DS need rights to read and write files in this folder.
3) FTP (this is the method I usually use): SAP writes the "transport files" you're after (i.e., the data) in the folder specified in "Working directory on SAP Server". Then, you need to establish ftp connectivity to that folder from the DS job server's perspective, which you do by entering the ftp host name and the path to that folder in "FTP host name" and "FTP relative path to the SAP working directory". In my opinion, the "relative" business is a little confusing, and I just typically enter the full ftp path, beginning the path w/ a forward slash, like "/usr/sap/tmp/BOBJ" or something like that. You also need to obtain a separate username and password for the ftp connectivity. Note that this name and password has NOTHING to do with the SAP username and password; you're just setting-up DS to act as an ftp client. I strongly encourage you to test ftp connectivity by using a regular ftp client from the DS job server and attempt to connect to your ftp host using the username and password you were given, and attempting to fetch some sample test file. If you can't do this, manually, then DS won't be able to do it, either.
Best wishes,
Jeff Prenevost

Need solution for Use Case - Page Fragment?

I have a set of controls and table which I need to insert into many tabs such that each tab displays the same table and functions but with slightly different data. The controls and table could be used in many different areas so doesn't make sense to code each and everyone mutiple times. I thought then that making this set of functions a page fragment and including it would do the trick, however, an exception that I have the same ID's defined was raised.
Can someone tell me what technology I should use for this use case such that one a single page with tabs I can include the same set of controls many times? Can page fragments be used multiple times on one page or do I need some sort of declarative component?
Thank you,
Kris

Task Flows is the way to go...
Just create a bounded task flow and create a default view activity (which is going to be your page fragment with table and other controls).
Now you can drop this TF on every tab and this way you will get a resuable table and control.
Read about Task flows in dev guide if you need further understanding on this.
One more thing, this will give you exactly same stuff on each tab. So, I am not sure what you want to change in every tab? A detailed description of your requirement might help.
Vik
Hope this helps
http://adfjsf.blogspot.com
http://www.linkedin.com/groupSharingMsg?displayCreate=&connId=-1&groupID=1801839

Need guidance for fusion web developement

Hi. I am newbie. I am currently using jdeveloper 11.
I have surfed a lot of videos about application developement using oracle fusion web development. Can anybody please suggest some really good books/tutorials/videos for my requirement below.
1. There are lot of tables which I have created for my business. The jsf page should have the feature to view existing/add data to these tables. It should be able to plot graphs.
2. I have created batch files which will send mails. I need to use buttons on the page which when clicked will exectue these batch files. In my previous post, they have asked me to use an ActionListener.
3. I had studied Java programming a long time ago (forgotten almost all of it). Please tell me what concepts of java should i study again so that i can program all these above things into my aplication.
I have until now just built a simple application which allows me to display values from a table in an adf form on a jsf page. I have surfed enough forums, like stackoverflow.com but i am not able to find the answers that i need to these above questions. This forum is my last hope! Please help guys!
P.s : I have glanced through these books,
Jdeveloper handbook 11g, quick start guide to oracle fusion web development.
Regards,
Sachin

Hi,
1.http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_58/jdtut_11r2_58_1.html
2. why do you need batch files? you can send mails through javax.mail API http://adfblogs.blogspot.com.es/2012/01/sending-e-mail-from-adf-application.html
3.this post resume a lot of resources for training and beginning https://blogs.oracle.com/shay/entry/how_do_i_start_learning_oracle_adf_and_jdeveloper

I need Guidance for SAP Teched for BW

Hi Everybody,
Iam new to this forum.I need some guidance regarding preparation for BW certification.
1.Which books i should read for what topics?
2.How many questions from individual topics we may expect?
3.Any documents that may help in preparing for BPS part.
4.I need some personal plans followed by you to get success in Teched(Your experiences).
Hope all of you will support me in all respects so that i too can achieve certification.
Thanks for your support.
Best regards,
Venu
mail:[email protected]

Hi Venu,
Check below links
http://www.sap.com/uk/services/education/courses/bw.epx
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=285
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=458
http://www50.sap.com/useducation/certification/examcontent.asp
http://www50.sap.com/useducation/certification/curriculum.asp?rid=506&vid=5
http://www50.sap.com/useducation/certification/curriculum.asp?rid=420
BW Certification Preperation
BW CERTIFICATION 3.5
Re: SAP BW Certification
/thread/49323 [original link is broken]
BW certification
All the best...
Krishna

Need help for use crm fields into EJB2

hello i need help.
i have one db table (table_1):
id_1
field_1
nad the second table that depends from the tale 1:
id_2
fields
id_1
id_1 is the field that join the table 2 with the table 1.
can anybody helps me to implemet this relationship into the xml files and into the java class?
into the java class for the second table i have:
public abstract long getId_1();
public abstract void setId_1(long Id_1);
public abstract long getId_2();
public abstract void setId_2(long Id_2);
public abstract String getField();
public abstract void setField(String field);
how must i reference the relation into the bean and into the confdiguration xml files (i use Weblogic 8 and EJB 2.1)
Thanks

SRM doesn't use kind of "cockpit" LO-like in ECC.
Overall picture:
http://help.sap.com/saphelp_srm40/helpdata/en/b3/cb7b401c976d1de10000000a1550b0/content.htm
If you setup data flows accordign Business Content of SRM:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
Then just perform an init load and schedule the deltas.

Need guidance for a Combo Box and Keystoke/Validate script

Hello,
My goal is to have a combo box selection trigger and enter a value into a text field however the text field needs to be editable. I want the combo box to determine a default value but changeable by the user if necessary. Here is the script, I just don't know where to put it.
if (!event.willCommit) {
var M1Month = this.getField("Month 1 Pulldown").value; var M1Exp = this.getField("M1 Exp");
if(M1Month == "January") {M1Exp.value = "1/31/10"};
if(M1Month == "February") {M1Exp.value = "2/28/10"};
if(M1Month == "March") {M1Exp.value = "3/31/10"};
if(M1Month == "April") {M1Exp.value = "4/30/10"};
if(M1Month == "May") {M1Exp.value = "5/31/10"};
if(M1Month == "June") {M1Exp.value = "6/30/10"};
if(M1Month == "July") {M1Exp.value = "7/31/10"};
if(M1Month == "August") {M1Exp.value = "8/31/10"};
if(M1Month == "September") {M1Exp.value = "9/30/10"};
if(M1Month == "October") {M1Exp.value = "10/31/10"};
if(M1Month == "November") {M1Exp.value = "11/30/10"};
if(M1Month == "December") {M1Exp.value = "12/31/10"};
if(M1Month == " ") {M1Exp.value = ""};

I did not say to take out the line. You need to replace the "" (a null string), with " " (a space).
But I would look at using the 'switch' statement that allows for a series of logical test and if none of those specific test has been passed takes a default action.
You need to put the script in the 'Custom keystroke script'.
if (!event.willCommit) {
var M1Exp = this.getField("M1 Exp");
if(event.changeEx == "January") {
M1Exp.value = "1/31/10";
} else if(event.changeEx == "February") {
M1Exp.value = "2/28/10";
} else if(event.changeEx == "March") {
M1Exp.value = "3/31/10";
} else if(event.changeEx == "April") {
M1Exp.value = "4/30/10";
} else if(event.changeEx == "May") {
M1Exp.value = "5/31/10";
} else if(event.changeEx == "June") {
M1Exp.value = "6/30/10";
}else if(event.changeEx == "July") {
M1Exp.value = "7/31/10";
} else if(event.changeEx == "August") {
M1Exp.value = "8/31/10";
} else if(event.changeEx == "September") {
M1Exp.value = "9/30/10";
}else if(event.changeEx == "October") {
M1Exp.value = "10/31/10";
}else if(event.changeEx == "November") {
M1Exp.value = "11/30/10";
}else if(event.changeEx == "December") {
M1Exp.value = "12/31/10";
}else{
// all other selections
M1Exp.value = "";
} // end not will commit
You will also need to use the 'event' object's 'changeEx' property.
If you do not need the selected text, by setting the export value to the expiration date your script could be:
if (!event.willCommit) {
this.getField("M1 Exp").value = event.changeEx;

Need guidance for upgrading application server

hello everyone ,
i have recently upgraded my oracle database from 9.2.0.5 to 10.2.0.4 on HP uX 11.11 , my EBS version is 11.5.10
now i want upgrade my application server, firstly i didnt knew version of my AS
after searching through oracle installer i found out the following components
/appldvp/apps/prodora/8.0.6
Oracle Unix Installer 4.0.3.0.0
Oracle On-Line Text Viewer 1.0.1.0.0
Client Software 8.0.6.0.0
Ordts Common Libraries 8.0.6.0.0
ORACLE NLS Libraries and Utilities 8.0.6.0.0
ORACLE Core Libraries 8.0.6.0.1
ORACLE Common RDBMS Libraries and Utilities 8.0.6.0.1
ORACLE PL/SQL Libraries 8.0.6.0.0
ORACLE Common Libraries 8.0.6.0.1
ORACLE Common Precomp Libraries 8.0.6.0.1
ORACLE Common Network Libraries and Utilities 8.0.6.3.0
ORACLE Common Trace Libraries 8.0.6.0.0
ORACLE Common Utilities 8.0.6.0.0
ORACLE Common Agent Libraries 8.0.6.0.0
ORACLE Common Libraries and Utilities 8.0.6.0.0
Platform specific Libraries and Utilities 8.0.6.0.0
Net8 (SQL*Net and Names) 8.0.6.3.0
TCP/IP Protocol Adapter 8.0.6.0.0
Remote Operations 3.0.2.0.1
Oracle Names 8.0.6.3.0
ToolKit 6.0 Base 6.0.8.10.1
Discoverer Collector 4.1.48.06.00
Configuration Guide 4.1.33f
Discoverer Libraries 4.1.48.06.00
Discoverer Locator 4.1.48.06.00
Discoverer Preferences 4.1.48.06.00
Discoverer Session 4.1.48.06.00
Oracle Discoverer Viewer for Web 4.1.48.06.00
Oracle Discoverer Plus 4.1.48.06.00
Oracle Discoverer Server (Web) 4.1.48.06.00
JInitiator 1.1.7.30
JInitiator 1.1.8.11
VisiBroker Smart Agent 3.3.1.0
VisiBroker for C++ 3.3.3.0
VisiBroker for Java 3.4.0.0
VisiBroker Products 3.3.1.0
PL/SQL 8.0.6.3.0
Oracle Server Manager 3.0.6.0.0
Oracle8 Enterprise (RDBMS & PLSQL) 8.0.6.3.0
<Database Startup> Load Files 1.0.0.0.1
Oracle Intelligent Agent 8.0.6.0.0
Oracle Trace 8.0.6.0.0
Precomp 8.0.6.3.0
Pro*C/C++ 8.0.6.3.0
Oracle8 JDBC Drivers 8.0.6.3.0
Java Runtime Environment 1.1.6.2o
Java Runtime Environment 1.1.8.13
SQL*Plus 8.0.6.0.0
ToolKit 6.0 Extension 6.0.8.10.1
Multimedia APIs 6.0.5.33.0
Tools Common Area 6.0.5.32.0
PL/SQL Procedure Builder 6.0.8.11.0-449
Integration Services 6.0.5.35.0
Oracle SQL Manager Library 6.0.8.10.0
Virtual Graphics System 6.0.5.35.0
Oracle Charting Library 6.0.8.10.1
Oracle Graphics 6.0.8.10.0
Oracle Forms Server and Forms Developer 6.0.8.11.3
Oracle Reports Server and Reports Developer 6.0.8.11.2
ZRC Library 6.0.8.3.5
GE Libraries 6.0.8.10.0
Release Notes for Oracle Tools Products 6.0.8.11.2
Tuxedo Support for Forms 6.0.5.2.0
Oracle Jinitiator (Domestic) 1.1.7.31
Oracle JDK Appletviewer (Domestic) 1.1.7.31
Oracle Browser 6.0.5.32.0
Oracle Wallet Manager 2.1.0.0.0
Common documentation resources 2.0.0.0
Oracle for HP 9000 Servers and Workstations Documentation 8.0.6.0
Resource Object Store 6.0.5.0.1
Toolkit Utility Library 6.0.5.33.1
Toolkit Automation Library 6.0.5.33.1
Oracle Information Navigator 6.0.4.0.0
Online Documentation Library 6.0.8.11.4
Project Builder 6.0.5.6.0
is AS version 8.0.6 , if it is , how do i upgarde to the latest on avaialble
thanx in advance

document 146468.1 specifies how to upgrade to latest realese of 9i AS , but i want ot upgrade it to 10gYou cannot upgrade your Oracle 9iAS to Oracle AS10g, you can only upgrade it to 9iAS (1.0.2.2.2). For more details, refer to Note: 186981.1 (What versions of Oracle9i Application Server Release 1 can be used with Oracle E-Business Suite Release 11i) and (Can an existing Release 11i application server be upgraded to Oracle Application Server 10g?)
If you want to have Oracle Applications Server 10g, you need to install it in a NEW ORACLE_HOME (Refer to Note: 233436.1 for more details).
i am still confused for my AS version , how can i clarify that To determine the version, issue:
UNIX: $ORACLE_HOME/Apache/Apache/bin/httpd -version
Windows: %ORACLE_HOME%\Apache\Apache\apache.exe -version
main components which i am using with my current AS are forms and reports serverOracle Developer 6i (Forms and Respports) are NOT part of Oracle Applications Server installation, it is installed under 8.0.6 ORACLE_HOME.
can they be independently upgraded?Yes, see my answer to the first question in this reply.

Need guidance for working with the available example labview VI

Hello,
I'm working with the pulse signals and the pulse signals will be effected by the motion artifacts.There is similar thread available on labview here Adaptive filtering to cancel out noise from an pulse signal for removing the motion artifacts from pulse signals.so,I am planning to use the vi posted in the thread as LMS block by block(example) with sampling rate of 100Hz and number of samples needed=100 using DAQPad-6015/6016.
But I am confused with the channels of DAQ as the author(who bulit this vi) says the channel0 for signal and channel1 for reference signal as shown in the attached image.
1)If channel1(aio) of DAQ is feeded with the analog input of pulse signals then what is the input needed/feeded to the channle1 of DAQ.
2)Can I directly use the vi by changing the sampling rate of 100hz and number of samples=100 or anything else is needed for this requirement.
Can someone explain me the required input to the channels and settings with the DAQ. thanks.
Attachments:
LMS_example.JPG ‏127 KB

Hello,
can someone explain how the DAQ channels settings are to be done.
thanks.

Need guidance for using EEWB

Similar Messages

Maybe you are looking for