No audio / No sound following Vista SP2 install on HP DV4 (HP Pavillion Entertainment PC)

Solution: I struggled with this problem (no audio) for 4 days. After installing Vista SP2, all sound stopped coming from my HP DV4 laptop. (HP Pavillion Entertainment PC).  I checked all settings, unloaded and reloaded SP2, reloaded all sound drivers (IDT) and tried the Microsoft "Fix It"... 50131. Nothing worked. Very frustrating. I happen to notice that the driver being loaded by the MS program was IDT High Definition Audio CODEC Driver 6.10.6209.0. I started to suspect this most recent driver was either loaded with SP2 or was incompatible with it. I noticed the HP Support web-site had a list of drivers specific to my machine. The sound driver was listed as IDT High Definition Audio CODEC Driver 6.10.6087.0, which appears to be an older version. I downloaded this driver, applied it, restarted the machine and voila!
You can find the codec here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69143-1&lc=en&dlc=en&cc=us&...
            GK -- Fremont, Ca

This often occurs when you plug in an HDMI device, on my machine.  Try manually setting the playback device:
Right-click the speaker icon in the taskbar.
Select Playback Devices.
Right-click the audio device you want (i.e. Speakers)
Select Set as default device.
If this does not work, try logging in with an account that has administrative access.  I discovered the wireless network can not be enabled by a non-administrative account, when it is disabled while logged in as an administrator.  You have to go back to the admin account, enable wireless, and then log back to the other account.
Avoid updating your driver, unless the device no longer functions.

Similar Messages

  • Vista SP2 install on T61 fails

    I have been trying to install Vista SP2 on a T61 running Vista Business with SP1 installed.
    Windows Update says it installed OK but when machine reboots to configure update it fails saying that "some changes could not be completed, reverting changes".
    Can anyone help me with this problem.
    Thank You
    Mick 
    Solved!
    Go to Solution.

    Hi,
    For me the reason was different.
    Please look at support.microsoft.com/kb/971204/
    Especially people with dual boot should read that carefully.
    Thanks,
    Lukasz

  • No Sound After Installing Vista SP2

    I installed with Vista SP2 update yesterday and now I have no sound. It seems to be a driver problem but updating the driver does not fix it. There is a red "x" by the speaker icon on the task bar and the volume buttons on my keyboard dont work.
    The Conexant HD audio driver says that it is installed properly but I have no volume.
    Microsoft seems to be aware of this problems and has a few fixes out (like http://support.microsoft.com/kb/948481/) but nothing they have published is helping me.
    Please help as I really need to have my sound up.

    This message can be closed - though, not sure if I am able to do myself.  I uninstalled the IDT Codec, did a full shutdown, then started back up, let windows fully load, was prompted for installing of the Codec by Windows, clicked to allow the installation to occur and the codec/driver was successfully installed.  I have my sound back!   Fantastic!

  • No Sound, M305-S4910, W. Vista SP2

    Hi,
    I installed Window Vista Home Premium Service Pack 2 on my M305-S4910.
    The drivers installed correctly and without errors, everything seems fine, but I have no audio in the speaker and not in headphones, the volume is not on mute.
    I tried reinstalling the driver's but it has not worked.
    Please someone can help me?
    Windows Vista SP2
    Conexant hight definition SmartAudio 221, version 4.36.7.50
    Thank you very much!!!

    Thank you Hippo for your help!!!
    I tray with support.microsoft.com and FixSound program but the problem are not solved.
    My laptop not have a sound, I have Conexant hight definition SmartAudio 221, version 4.36.7.50 instaled in Device Manager.
    Please help me.
    Thank you.
    Stifi

  • Windows Vista SP2 fails to install

    When I install Vista SP2 on my Vista Ultimate X86 on my dell optiplex 745 I get the following error
    Installation was not successful
    error true_e_nosignature(0x800b0100)
    I tried running the System Update Readiness and the standalone installer and didn't work. here is the log of the System Update Readiness.
    Checking System Update Readiness.
    Binary Version 6.0.6002.23186
    Package Version 25.0
    2014-11-28 10:08
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    (f)    CBS MUM Missing    0x00000002    servicing\Packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum        
    Checking Component Store
    Summary:
    Seconds executed: 1353
     Found 1 errors
      CBS MUM Missing Total count: 1
    Unavailable repair files:
        servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
        servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.cat
    Checking CoreOS key for repairing corruptions.
    Winner version: 6.0.6001.18000.
    Processor architecture: x86.
    Check key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6001.18000&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\ComputerName
    Recreated value: @_type.
    Recreated value: @dataOnly.
    Recreated value: @default.
    Recreated value: @description.
    Recreated value: @displayName.
    Recreated value: @handler.
    Recreated value: @legacyName.
    Recreated value: @legacyType.
    Recreated value: @migrate.
    Recreated value: @scope.
    Recreated value: @xsd:type.
    Also Microsoft Tinker, Dreamscene, Microsoft .NET framework 3.5 Service Pack 1 and .NET framework 3.5 Family update (KB951847) and others failed too.

    Further examination showed, that the problem lies in the expired digital signatures
    of the MSI-s that clickonce tries to download.
    Please see attached image Capture.PNG.
    I also reported this bug to the Microsoft Connect: https://connect.microsoft.com/VisualStudio/feedback/details/1082242/clickonce-unable-to-install-localdb-2012-on-windows-vista-sp2
    The problematic MSI-s shoud be signed again. Can I expect from Microsoft to resolve
    this?
    Hello,
    Based on your description, it seems that this issue only occurs on  Windows Vista SP2, and I get that connect you shared and have helped to vote it.
    I think that Microsoft engineers will evaluate them seriously and provide you better support. In addition, you can post the answer here once the issue is resolved.
    Best regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Vista 32-Bit SP2 install broke my network adapter drivers

    I have a T61 model 765912G. I installed Vista SP2 from a fully up to date SP1 installation with everything working. It now has yellow warning triangles in Device Manager against: Intel (R) 82566MM Gigabit Network Connection and Intel(R) Wireless WiFi Link 4965AG adapters. They now both show the following on the 'general' tab on their device properties:
    This device cannot start. (Code 10)
    Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
    I have uninstalled the device from device manager and rebooted, I have uninstalled the device from device manager and ticked 'remove drivers' and rebooted, I have downloaded and installed the latest drivers from the Lenovo website and I have also followed the link to the Vista solutions where I was directed to the Intel website from where I downloaded and installed the most current driver.
    None of the above actions repaired this issue. I do have Cisco VPN client v5.0.00.0340 and VMWare Workstation v6 installed on my laptop both of which install virtual network devices, but both worked perfectly before the SP2 upgrade.
    If anyone has seen this and knows what the, or if there is a, fix is (short of uninstaling SP2) please let me know....
    I have a similar post on a Microsoft support forum and the best so far is that I go to IBM - really helpful.
    My line manager has the same model laptop with the same OS and had exactly the same problem, he uninstalled SP2 and everything worked properly afterwards. I'd like to persevere for a little while and try to fix this error.
    I am online now by virtue of the fact that I have inserted a 3COM PCMCIA card into the PC Card slot on my laptop. This suggests that the network subsytem is OK, and it is just the drivers that SP2 has broken.

    Well, the Mac OS install disk includes all the drivers you need for all the hardware you have. You don't need to download anything separately.
    You don't need to download Direct X. Direct X 10 comes with Vista.

  • Yamaha XG-AC Audio device not working after SP2 for XP was installed

    Hi,
    i'm new in this forum and maybe my question is a stupid one but i'm not able to solve this problem.
    My Satellite 5200-801 doesn't make any sound after i've installed SP2 for XP. I tried to find a new driver for Yamaha XG-AC Audio Device( the one that doesn't work is 6.13.10.2152 (date 19/07/2002)but i was not able to find anything.
    Please, could you help me ?
    Thanks
    Bruno

    Hi,
    I found another posting in this forum about this issue!
    Your Satellite 5200-802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip does make problems with Service Pack 2 because MS regards the Yamaha AC-XG sound driver as being unstable. When Service Pack 2 is installed, Windows will disable the sound driver.
    Here are some links which could help you!
    Yamaha Generic Driver:
    http://drivers.soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html
    Relevant links:
    http://www.yamaha.co.jp/english/lsiexp.html
    http://support.microsoft.com/default.aspx?scid=kb;en-us;328435
    Happy new year!
    TOK

  • HT4759 getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

    getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

    There is a very long way which is removing anything related to Apple including stuff in the registry.
    The short way is as follows. It worked for me.
    I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
    1. Remove the Apple account from Outlook.  In my case a me.com account.
    2. Disconnect the connection to ICloud in the control panel of version 3.1.
    REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
    3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
    4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
    and C\Program Files\Common Files \Apple.  My computer is 64 bits.
    5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
    6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

  • Install request using  on Vista/SP2  with IE9 becomes modal reboot needed

    I am using the following to keep the install process local
    <script>
    // check if current JRE version is greater than 1.6.0
    alert("versioncheck " + deployJava.versionCheck('1.6.0_10+'));
    if (deployJava.versionCheck('1.6.0_10+') == false) {                  
    userInput = confirm("You need the latest Java(TM) Runtime Environment. Would you like to update now?");
    if (userInput == true) { 
    // Set deployJava.returnPage to make sure user comes back to
    // your web site after installing the JRE
    deployJava.returnPage = location.href;
    // install latest JRE or redirect user to another page to get JRE from.
    deployJava.installLatestJRE();
    </script>
    When the Jre is not present, an install is agreed to and a dialog appears saying that
    1.7_01 estimate to download is zero, and the browser hangs, I cannot close the window
    other aspects of the system are working. I cannot move the browser window. I have waited
    over ten minutes. It fails each time as an admin user.
    Windows Vista SP2 x86
    IE9 9.08.8112.16421
    Has anyone else seen this before I file a bug?

    Can you retry the installation (user interface version), dismiss error and send me the AIR Install.log? ([email protected])
    Located: C:\User\"your_user_name"\ApData\Local\Adobe\AIR\logs.
    Down load current AIR version here:  http://get.adobe.com/air/
    Regarding uninstall, did you see dialog similar to this?
    What was preventing you from  unnstalling AIR?
    This dialog usually displays all the AIR apps installed on your system.
    You should still be able to remove AIR runtime and re-install.
    Regarding cmdline install:
    Can you run a silent install from cmd line (Run as Administrator) with 2.0.3 version of AIR?
    AdobeAIRInstaller.exe -silent

  • Firefox will not open in Vista SP2 after installing software for a Brother MFC printer.

    I have 7 computer network. All the machines are running Vista SP2. I recently purchased a Brother MFC 9325cw, and installed the printer/scanner drivers as well as a program called scansoft paperport on each of the machines individually.
    I left out the some of the bulkier aspects of the driver package, namely the brother control center because it seems to eat up a lot ram at start up.
    Since I have installed the printer driver on my computers, several of them will not open firefox.
    I have tried re-installing firefox on one machine so far to no avail.
    Next I will try to re-install the brother software. Has anyone else encountered this problem before?

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Vista SP2 will not install

    Good day, this is my first post. We have a 3000 N100 that will not allow Vista SP2 to install. At least that is what Microsoft support says, after spending all Sunday morning chatting with them. But SP1 installed just fine a while ago.
    I uninstalled AVG today  just in case but no joy.
    Microsoft insists that we should reinstall Vista, but no Vista CD came with the laptop.
    Another thing: when I click on the Lenovo Care icon, nothing happens?
    thanks

    Welcome to lenovo user forums
    Did you try using the system update readiness tool?
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Satellite L300 (PSLB9A) - No internet access after installing Vista SP2

    Just upgraded my Vista with Service Pack 2 and found that I cannot connect to any internet sites, have proved it is SP2 by rstoring to prior SP2 and all is OK, also reloaded the OS with my recovery disks and all works OK...... ....until I load SP2 then when I try to access the internet I cannot, getting "IE cannot display the webpage".
    Diagnostics report no problems found. This happens with either IE7 or IE8, firewall is disabled and I can reach any network device including my server but am unable to load the server web page, same issue..
    Any assistance would be appreciated.
    Pete

    Hi Sascha
    Yes I rolled it back to SP1 last night as I could find no way to fix the problem, I've never seen this before. Anyway all now works OK with SP1, before I rolled back I also rolled back IE8 to IE7 (no change) and removed, one by one the updates post SP2 install (also no change), as soon as I had rolled back to SP1 all worked fine, can get instant internet. I am going to load IE8 tonight and see if that works OK.
    As for Skype MSN, no did not try those while SP2 was loaded, should have tried my skype account.
    Any thoughts?

  • HP Pavilion dv6 1133-ea Windows Vista SP2

    So after install windows vista sp2, I have noticed that the sound has disappeared...all the drivers are installed! AND I really cannot see why the sound would not be there because the drivers and everything are fine...is it some sort of compatability problem?

    Hi,
    Try the following.
    First, uninstall Skype and when this has completed, restart the notebook.
    When windows has reloaded, download and reinstall the Chipset driver Here.
    When the installation has finished, restart the notebook again.
    Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Reinstall Skype and see if the Mic now works Ok.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound Blaster 5.1 Install iss

    I just purchased the basic Sound Blaster 5. sound card for my PC.
    I followed all the instructions and installed the drivers on my Windows XP (SP2) machine, but for some reason the sound card is not recognized when I click on "Sound and Audio Devices" in the control panel, even though the driver seems to be installed and working properly when I check it from the "Device Manager".
    I tried reinstalling the drivers twice now, but to no avail. I also tried uninstalling the drivers to the onboard soundcard, and disabling the onboard soundcard itself through the Device Manager, but that also didn't help.
    Finally, if I go to Device Manager -> Sound, video and game controllers -> Sound Blaster 5. -> Properties -> Properties Tab -> Audio Devices -> Sound Blaster 5. Properties
    It says:
    "Status: Driver is enabled but has not been started"
    Does anyone know what that means, and how do I "start" the driver?
    Just so there are no misunderstandings, here is the exact model I purchased:
    http://www.soundblaster.com/products/product.asp?category=&subcategory=207&product=484

    Thanks for all the people who contributed, but in fact this has nothing to do with the sound card model. I searched through various forums on the internet, and apparently it's some kind of a Windows bug which many people experienced with a wide range of sound card models and computers.
    Again the problem is with the driver status, saying "Driver is enabled but has not been started".
    Unfortunately there is only one solution to this problem which works about 50% of the time, and that is to install the "Plug and Play Software Enumerator" windows component, because in some cases it was not installed. For the other 50% of the people with this problem who did have that component already installed, the exact cause of the problem is not really known and the only viable solution is to re-install windows, which after about 3 days of trying work through all the possible solutions that I could find to this problem, is what I eventually had to do.
    Now everything works great though... But it took quite a bit of time to re-install windows and all my programs.
    Message Edited by nanquan on 09--200703:37 PM

  • Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

    Introduction
    Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
    Things i found and learned
    Oracle
    1. I have download Oracle 10g XE and installed in my windows vista sp2.
    2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
    3. I also edit TNSNAMES to following below:
    OraDb =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    4. My sqlnet like following below:
    SQLNET.AUTHENTICATION_SERVICES = (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    5.I have try tnsping OraDB and its works.
    6. I monitoring task manager and OracleServicesXE is running.
    7. ora_dba is added in Group.
    Problem in SQLPLUS
    When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
    i . In cmd i type sqlplus and enter then i been ask for username and password.
    ii. After i insert my username and password and enter then i get the error of ORA-12560.
    Visual Basic 2010
    1. First i created my project, drawing label and button for test connection.
    2. Then, i add reference Oracle.DataAccess into my project.
    3. I type following script into my vb form:
    Imports System.Data
    Imports Oracle.DataAccess.Client
    Imports Oracle.DataAccess.Types
    Public Class Logon
    Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
    Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
    Dim conn As New OracleConnection(oradb)
    conn.Open()
    Dim cmd As New OracleCommand
    cmd.Connection = conn
    cmd.CommandText = "select SName from Staff where SName = shin"
    cmd.CommandType = CommandType.Text
    Dim dr As OracleDataReader = cmd.ExecuteReader()
    dr.Read()
    lblOra.Text = dr.Item("SName")
    conn.Dispose()
    End Sub
    End Class
    Problem in VB2010
    When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
    Extra Question*
    1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
    2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
    3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
    4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
    Edited by: user9173084 on Jul 19, 2010 3:34 AM

    Huhu..
    Yo, henry
    I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
    Here is my lsnrctl service
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "XEXDB" has 1 instance(s).
    Instance "xe", status READY has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 state:ready
    DISPATCHER <machine: SHIN-PC, pid: 1932>
    (ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
    Service "XE_XPT" has 1 instance(s).
    Instance "xe", status READY has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "xe" has 1 instance(s).
    Instance "xe", status READY has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    The command completed successfully
    Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
    Actually there is somethings as a newbie i wondering long time alreadly ><
    1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
    Also please check at my TNSNAME.ORA:
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    OraDb =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    I got the feeling there is so close~~~!!!

Maybe you are looking for