Planned order Vs Actual Production report

Hi Experts
We are running MRP make to stock means we maintain PIR(MD61) in system. On the basis of PIR system create planned order and we declare production against these planned orders. I need a report which show the detail of planned order and actual production declare against that planned order. Please guide.
Regards
Parkash Chand

Dear Parkash,
second possible soluction could be create a custom report using this standard Bapi BAPI_MATERIAL_STOCK_REQ_LIST in order to read MRP element and to summarize the elements desired   (DELKZ field):
MRP Ele Ind   Object
PP     Planned independent requirement
FE     Production order
Pa     Planned order
Third possible soluction setting in customizing the writing of the MRP table MDKP for header data and MDTB for item data and create a Query on these mrp table.
Let me know if i've been useful for you.
Daniele

Similar Messages

  • Planned time  Vs Actual time report for activities

    How I can get 'Planned time  Vs Actual time report for activities( std values like setup , machine , labour  ) ' ?

    Hi,
       From the tcode co28  choose op/sub op
       Choose the profile as 000001and enter your order number
       Execute.
       Select the op and choose ALL FILEDS ICON.
       From there you can get the planned standard values and the actual standard
       values.
      Regards,
      nandha

  • Collective conversion of planned order to one production order

    Dear all,
    1. I have N number of pld ord for same material so i need to convert as production order with cumulative quantity.
    Because to reduce  Issing and confirming and receiving of number of production orders.
    2. I need to create Number of production order with diffferent material numbers  in one screen with different production order number.
    Because per day i need to create more number of production order with different material number. If i create one by one it will consume more time as well as its not practical possible for our business scenario.
    Pls let me know any standards are available in SAP.
    Regards,
    S.Suresh.

    Dear Suresh,
    You can convert Planned Orders into Production order collectively as a mass maintanance in CO41 Tcode.
    Revert if any doubt in case using above tcode.
    Further if you wish to have one production order against multiple planned orders it is not possible as per Standard SAP.
    You can convert to each planned order into individual production order not to single production order.
    If you wish clubbed production order then better you use Individual / Collective Indicator  as
    2     Collective requirements only
    Then you will get cumulative planned orders only against each material and you can convert all of them cumulatively to production orders in CO41 as a mass maintanance.
    Hope your problem resolves.
    Regards,
    Tejas
    Regards,
    Tejas

  • Planned Order for a Product not being shown

    Hi Experts!!
    I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
    Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
    I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
    Please help me out. Your help is highly appreciated. Thanks a lot!!

    Hi Srinivas,
    With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
    I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
    As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
    and COMMIT_CONTROL(should be 'E').
    Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
    Thanks,
    Santosh KB.

  • Planned & Actual Production  report

    Hello all
    MY requirement is ,  i need to add this two req in the one report   ( Z transaction ),
    Planned Production - This must show the  production plan for the current week only. We should be able to drill in further and see the actual day of planned production, we should also be able to see forward plans for the next 3/4 weeks by day.                                                                           
    Actual Production - This should show the amount of stock physically produced against the planned qty
    How can i get this all information ?, what logic  i need to tell the developer? , In which table i will get all the inforamation?.
    Please help me out in this.
    Piyush

    Dear ,
    SAP has given a fabulous report called -Order Information System -COOIS where you can play around your every requirement which you are looking for .Here , you various selection criteria .Let me explain based on your rquirement :
    1.Select Item -Select Standard Profile and Enter Plant  , Order Type , ( Optional -Material /Production Order ) execute  which will display all the related information .Now you have to goto -Change Lay out option in the top and drag and drop all of your filed like
    Like wise , you can get as many infoamrion as you can  based on selection procedure .
    However , I have developed another report which is based on COOIS  for different busness requirement and sharing you the few field mapping : All the field will based on AFKO /AFRU/AUFNR
         WERKS        AUFK-WERKS,              "Plant
          AUFNR       AFKO-AUFNR,              " Prod. Order No.
          PLNBEZ      AFKO-PLNBEZ,             " Header Material No.
          GSTRI         AFKO-GSTRI,                "Actual Start Date
          GLTRI         AFKO-GLTRI,                "Actual Finish Date
          GAMNG      AFKO-GAMNG,              Prod. Order Qty.
          AUFPL        AFKO-AUFPL,              "Planned No. Of Operation
          AUART       AUFK-AUART,              Order Type
           ISM01        AFRU-ISM01,              "Required Qty.
          VGW01     AFVV-VGW01,           "Quantity Withdrawn
          VGE01       AFVV-VGE01,              "Unit Of Measure
          EFFPERC   AFVV-VGW01,              "Eficiency %age
          MAKTX     MAKT-MAKTX,              "Material Description
    Try and let us know if you need farther help
    Regards
    JH

  • Planned vs actual production report

    Hi,
    Which report is used for planned vs actual production information.
    Rajesh

    Hi
    COOIS will give all the standard order relating to production order. You can get the data in required way, by giving propoer input to the system through the front end screen
    Regards
    J.Saravan

  • Order wise-Planned hours VS Actual Hours report

    Hi,
    Is there any report which shows me the Orderwise Planned Hours VS Actual hours.
    Regards
    SB

    SB,
    Have a look at TCode IW37N (Order/operation overview) and display the Work and Actual Work fields.
    You can probably use IW37 too..
    PeteA

  • Planned order to multiple Production Orders

    Dear Gurus,
    I would like to split planned order qty and convert into multiple production orders in CO41, is there any user exits or BADI which makes it possible?
    Many Thanks!
    //Sreenivas

    try the following function module
    CO_AB_CONVERT_PLANNED_ORDERS
    CO_SD_PLANNED_ORDER_CONVERT

  • Error in Conversion of Planned Orders to AFS production Orders

    Dear Mam/Sir,
    We are working in AFS Scenario.There are following observations during
    AFS BOM/Planned order conversion/Material availabilty as follows:
    1) When Item category 'T'(Text Item) is used ,with 'witout fixed qty. indicator'in AFS BOM,then during the MRP Run BOM gets exploded & dependent requirements are created for AFS /non-AFS Components. But, when Bill of Material Tab is accessesd in the Planned Order system throws error'REQUIRED PARAMETER MISSING WHEN CALLIN UP MODULE MARC_SINGLE_READ'.When this planned order is converted to Production order, Order reservation is created only for NON-AFS(std. component).
    2) When a Planned order(with all BOM components item  category 'L') is converted ,then system gives error in material availability check : Message no.AG022'An error occurred during Remote Function call on the ATP Server'.
    3) When for a AFS material BOM components with item category'L' is used an order is created.during material availabilty check system shows missing part. The moment  a 'text' item is added in BOM the for the same order system commits all components.Though components are missing.
    Kindly advise.
    regards,
    Stuti

    Hi,
    Good to know that your problem is resolved.
    But the error you mentioned appears may be because of configuration problems.
    You should check what is account assignment category mentioned in the corresponding requirement class for the strategy group you have used in the materials master.
    Also you should check the settlement profile that you have used for your order types.
    The account assignment category and settlement profile maintained, must be set properly so that allowed transactions are executed.
    Also, there is problem with the message itself which appears for many reasons. More particularly when you are in MTO / ETO scenario or using WBS to create orders.This make it difficult to check the correct cause of the problem!!
    Pavan

  • Error during planned order conversion in production order.

    Hi,
    In Discrete Scenario,
    During conversion of planned order into production order -CO40  i get the message
    " 02.08.2013 date comes after end of valid factory calendar. (Please correct)
    Message no. 61062 ".
    But in routing i maintain the correct dates & also in Planned order.
    Pl give solution .
    Rg
    SM

    Hi,
    Please check what is the factory calender maintained ..what are the working days and also that the work center which u have defined for this material,what is the  capacity and is there any other operations might be engaged till 2013..these parameters work center might be overloaded
    And also check  in material master  what is the scedule margin key i.e. Float after production and before production.
    In House production time u have mainatained..
    Then u have done forward or backward sceduling..
    Please check ..hope this is clear..
    Regards,
    Sravanthi
    Edited by: sravanthi nemani on Feb 9, 2009 1:21 PM

  • No Automatic Dispatching Of Planned Order to new Production Version

    Dear Sir,
    When rescheduling an operation from one line to another, the system
    checks whether a production version exists for the material to be
    produced that contains the new production line as the preferred work
    center. If such a production version is found, this version is taken
    over into the planned order. The planned order is scheduled again based
    on the production version.
    The second function allows you to automatically search for an
    alternative work center in the case of a capacity overload of a work
    center, and to dispatch the operations to it. The predefined
    prioritization of the alternative work centers is considered in this
    case.
    The indicator Reschedule with production version must be set in the
    strategy profile.
    My issue is sytem does not making automatic Dispatch to the second
    Production version for the material at the time of insufficient capacity
    Best Regards
    Rami Abd El Fattah Mohamed,PPQM Functional & Technical Application
    Consultant

    In the dispatching control u can remove operation date check indicator and regarding the termination indicator SAP help says"
    "if you have not set this indicator then dispatching is not terminated but carried out without taking the production version into account. That means that the planned order is scheduled with the old standard values and the formulas from the new work center and dispatched to the new line."
    Please check if it works now.
    thanks

  • Conversion of Planned order into a Production Order.

    Hi All,
             I have one ticket in which I have to change the format of generating serial no.s.This format has to consider
    Basic Start Date while generating it.In our project Serial No is getting generated at the time of Production Order.
    So I have to pass this start date before Prod Order is getting created from a Planned Order.What i want to know is it possible to pass a start date when a Planned Order is getting converted into Prod Order as i think it will be a standard SAP program which will convert a Planned Order into Prod Order.Any suggestions on how to achieve this is most welcome.
    Thanks in Advance,
    Saket

    Hi,
    I am not able to get what is passing the start date.
    Second thing is how you are generating the serial number - manually or automatic?
    If you are generating serial number automatic, then it is not possible to generate it considering the basic start date.
    But if you are entering the serial number manually, then there should not be any problem as system will accept that serial number which you enter at the time of conversion of planned order to production order.
    Regards
    Amit parkhi

  • Convert multiple planned orders to single production order

    Dear All !
    In our business, same component is used for manufacturing multiple items. In a sales order multiple items are booked. When we do MRP RUN, system creates multiple planned orders for each line item. We can run only one production order as for every item order quantity becomes very small and we cannot process that lot. To have a sizable lot quantity we need to combine all planned orders into a single production order.
    Can someone please help.

    Govinder,
    Define those components for collective processing. You need to define "2" - for Field Indv/Coll in MRP4 view of those material master and you can have daily/weekly/monthly lotsize defined for those items.
    Regards,
    Prasobh

  • Availability Check during Planned Order Conversion to Production Order

    Hi PP Gurus,
        During Conversion it prompts that materials are not available or missing parts log, though in Stock Overview in that Storage Location it contains more quantity(in unrestricted use) that what is needed. Is the requirement date and GR date have some relevancy on this prompt??
    Thanks,
    Matildo, Edsel
    PP/QM Consultant

    Dear,
    You have tick Include Reservation in T.Code OPJJ Avaibility Check control in assign chcking rule to your order type.Please try without it.
    You Can also check collective avaibilty check through CO24,MDVP,COHVPI,CO09.
    Regards,
    R.Brahmankar

  • Plan order table

    Hi PP Gurus,
    I am developing MRP report for a client in which we are calculating the delay in plan opening period means difference between   plan opening date of plan order and actual production order creation date .
    For this we are getting production order creation date from production order but this order is creating from plan order so we are not getting plan opening date from plan order as the entry of plan order gets deleted from PLAF table .
    Is there any other table of plan order for getting the plan order data even after converting it into production order?
    Regards,

    Hi!,
    No you won'tfind  that data once the planned order is converted to production order. You can do one thing. Please develop an enhacement which will fetch the planned order data from PLAF table and will save it to a ZTABLE before the planned order conversion, so that you can use the same later on. You can also update the created production order number in that table.
    I hope this will help in solving your issue.
    Regards,
    Uday

Maybe you are looking for