No wi fi hardware found

No Bluetooth,No Wi-Fi
What can I do
Please help
Thank you

Intel-based Macs: Resetting the System Management Controller (SMC)

Similar Messages

  • BlueTooth [BT] failed during use. Various links say "BT Not Available" - "No BT Hardware Found" etc. Have 3 yr. MacBook Pro Notebook with OSX 10.6.8 with built-in Bluetooth. HELP !

    Bluetooth [BT] failed during use.Menu bar icon remains as does two BT icons in Utilities folder. System Prefs. BT icon totally gone. Remaining icons say "No BT Hardware Found" - " BT Not Available" etc. Have 3 yr. old MacBook Pro Notebook with OSX 10.6.8 & built-in  Bluetooth. [ Close by iPad's BT remains functional. ]

    Yeah the Bluetooth hardware has failed and needs to be replaced. there is nothing you can do except replace the BT chip. Take it to Apple.

  • IPod 160GB - New Hardware Found Keeps Popping Up

    I've got a rather unusual problem with my 160GB iPod. I don't understand why, but it seems that at times if my iPod is being disconnected too many times, the "new hardware found" pops up, and then the add new hardware wizard. When that happens, because I don't know the exact location of the drivers that corresponds, I end up letting it search automatically, and in turn for some reason it tends to pick up and try to install my Nintendo Wifi Adaptor drivers, which I've had installed long before I even bought my iPod. I was wondering if someone could assist me, or if there were a possability to obtain drivers separately from iTunes. If anyone has any possible info please leave a reply back. Thanks!

    Hi.
    Have you seen this, or is it any good?
    http://support.apple.com/kb/TS1538
    Vic

  • Wifi no hardware found

    After upgrading my macbook pro with latest available upgrade (Java, Safari,...), the WiFi does not work anymore.
    It says :"No hardware found".
    In system preferences, network, wifi; the material tab is greyed out with no number for the ID of the WiFi.
    I have tried to clean the cache, reset the PRAM, and reinstall Mac OSX but problem stiil there.
    Thanks for any feedback or suggestions.

    After upgrading my macbook pro with latest available upgrade (Java, Safari,...), the WiFi does not work anymore.
    It says :"No hardware found".
    In system preferences, network, wifi; the material tab is greyed out with no number for the ID of the WiFi.
    I have tried to clean the cache, reset the PRAM, and reinstall Mac OSX but problem stiil there.
    Thanks for any feedback or suggestions.

  • MSI P4M900M2-L new hardware found after every switch off

    I've just installed the MSI P4M900M2-L motherboard with a E4400 processor.
    Everything installs fine (not ! in device manager) and everthing seems to work ok.
    If I reboot the machine everything also works ok.
    My problem starts if I switch the machine off. When I do this, every time windows boots (vista) the "new hardware found" icon pops up at the bottom and it installs the following:
       - USB to PCI adaptor
       - PCI to PCI adaptor
       - High definition audio
       - and also my tv tuner card
    Once it's done a bit of searching all the devices become available, but how can I stop this happening. It's really annoying for Vista Media Center as I've to reconfigure the tuner every time after a reboot (about a 15 minute process).
    Any help would be great, as it's driving me mad!

    I think you haven't installed VIA's drivers? Have you?
    check out one at http://www.viaarena.com

  • Wi-fi: No Hardware Found and USB Wi-fi Adapter

    Hello !
    I want to explain everything that happened from the beginning. My MacBook Air started giving a problem showing " Wifi : No No Hardware Installed " . Then the problems started . I found a few ways to resolve this problem:
    1 . Holding Command + Option + P + R before turning on the MacBook . He goes to the gray screen and restart again. Now release the keys .
    2 . Shut down your MacBook and connect the charger . Click Left Shift + Control + Command + Power simultaneously. Generally the macbook league, but if you do not call , press the power button.
    3 . When the system starts up activate bluetooth and then turn off . Restart . Should operate normally . Almost does not work sometimes restarting , shut solves .
    Note : all these ways are temporary resolutions .
    When the Wifi back to work, after some time the system panics and crashes and to shut down the macbook and start it again . When Wi - fi appears : No No Hardware Installed the macbook works perfectly without wi - fi .
    I read many articles on forums and I think the problem may be with the AirPort card . I have not been to an apple store to see a budget.
    Trying to solve the problem I bought a Wireless USB Adapter: LINK ONE - L1-AW1Un that comes with the installation CD containing the drivers. Use the Mavericks (the latest) installed. After restarting, open the program normally Raillink the Wireless Utility. I connect, create a profile and appears active when connected after a few seconds change to disconected doing it constantly.
    Below is the Wireless USB Adapter manual: LINK ONE - L1-AW1Un.
    https://drive.google.com/file/d/0B0tn0xatEydORjF5aV96ZFZxQ3M/edit
    (MANUAL - Google Drivers)
    I did not follow. Unable to create an IIS 7 certificate as shown in the manual. The drivers on the CD and the website are 10.5, 10.6, 10.7;
    I need help.
    Thank You

    Hello Marvyn,
    Try install following driver on Ralink's site: http://www.mediatek.com/en/downloads/usb-rt2870rt2770rt3x7xrt537xrt5572/.
    After install driver on my MacBook Pro, OS X Mavericks (10.9.3), the Wireless USB Adapter L1-AW1Un works perfectly.
    Best regards.

  • New Hardware found but not automatically installed.

    Hi there, Could someone please help me I've just bought a 5th gen 80gb and my computer recognises it but doesn't automatically install the hardware. It takes me to the install new hardware wizard and can't automatically do it. So I can't do anything with it.
    5th gen 80gb ipod   Windows XP  

    Hi jenny,
    Ive just tried what u say its not workin' plus I tried my 0404 in my friends computer too it says the same thing "not supported product" when i try 2 install from the cd...
    Im using windows xp sp1 should I try sp2 or go for the technical service (but i was using this card with latest drivers in sp1 like 2 months)
    ps: one interesting thing is when i boot my computer it says creative audigy etc found now, my friends computer says "multimedia audio controller"..
    update (I tried with sp2 its not workin)
    Message Edited by whatudid2me on 10-27-200604:44 PM

  • Bootcamp Issues: XP Frozen with New Hardware Found screen

    I've installed bootcamp on an Imac with MacOS 10.6.4. This went fine. Then I installed XP. This went fine as well. Then I inserted a Mac OX X Snow Leopard 10.6.4 disk to install the Boot Camp Drivers for Windows. But XP is just frozen with the "Found New Hardware Wizard" screen. Nothing happens.
    The Mac OS Snow Leopard 10.6.4 disk is not the one that came with the Imac. We don't have that disk. Could this be the problem?
    If so, what can be done at this point?

    Hi and welcome to Discussions,
    RichScherl wrote:
    I've installed bootcamp on an Imac with MacOS 10.6.4. This went fine. Then I installed XP. This went fine as well. Then I inserted a Mac OX X Snow Leopard 10.6.4 disk to install the Boot Camp Drivers for Windows. But XP is just frozen with the "Found New Hardware Wizard" screen. Nothing happens.
    The Mac OS Snow Leopard 10.6.4 disk is not the one that came with the Imac. We don't have that disk. Could this be the problem?
    That could indeed be the problem. What OSX disc are you using ? A retail bought one ? Or one that came with another Mac ?
    If so, what can be done at this point?
    Best would be to call Apple while having the serialnumber of your iMac at hand and ask for replacement OSX discs.
    Usually Apple sends them to you for a relativlely small fee.
    Since you also need the OSX disc for basic troubleshooting tasks it is vital to have one.
    Regards
    Stefan

  • Help!!  Suddenly..no airport hardware found!  Please help!

    My 17" powerbook fell and now claims that no airport hardware can be found. I'm thinking the card dislodged or something but how do I re-secure it??
    Please help.

    I don't think they do loaners, since I've never been able to get them to do that when I've asked, but you can sometimes ask for a replacement machine if the repairs have been enough that they can't solve the problem. Never wait for them to call you back. I've never gotten a call back. Hold onto a case number and if you need to reach them for any reason call them on the case number. We can't really discuss Apple policy here, though I can certainly tell you what I've experienced.
    A loaner would technically be a machine you can borrow while yours is off to repairs. The machine you'd ask for a replacement would be yours to keep, and you'd never get back the original machine. Hence the good reason for a backup so you can restore to the replacement machine.

  • My itunes will not detect any devices. When i do plug in a device it comes up with new hardware found then asks me to install it as a digital still camera. I have uninstalles and reinstalled itunes but that didnt help

    Plaese help

    too funny   i wrote this and literally 1 minute later found a post that hrlped fix it.  deleting the iTunes folder in the following location.
    C:\Users\(usrname)\AppData\Roaming\Apple Computer

  • No Bluetooth hardware found. Please Help ?

    Hi People
    I am running Mac OS X 10.6.8 on my mid 2010 Macbook Pro 2.4 Ghz. I cant find my bluetooth hardware. Can anybody please tell me a procedure to fix it. It been a long time that I have been having this problem and even the apple guys are unable to fix this problem.
    Please help :|

    SMC reset.
    PRAM reset.
    And if those don't work you can try a bluetooth factory reset.

  • No HDMI and Thunderbolt- hardware not found

    Hi
    I've been trying to connect my Macbook Pro to a TV via mini DP adapter and Hdmi cable but without success.
    Checking through my system report, it states THUNDERBOLT - No hardware found.
    Is that why I can't get to connect to an external display.

    A thunderbolt adapter/cable  to HDMI should work fine in a Mini DisplayPort.
    Look under About this Mac > (More info) > System Report > Graphics & Displays for your graphics devices.
    What needs to happen (and often does not when dealing with TV sets) is that the TV set must be paying attention to that HDMI port when the Mac Powers on. The Mac sends a query to the device, "what is your name, and what are your capabilities?" If the device provides it, this information is reflected under Graphics and Displays.
    If it is not shown, the System Preferences > Displays > (Detect Displays) Button is supposed to get the Mac to ask again.
    Unless/Until that information is reflected under Graphics & Displays, the device will not show a picture.

  • XFI Installation Issue "Found New Hardware&qu

    Hello technical support, I recently bought a XFI Fatality sound card on 0/07 and recieved it 0/0. I didnt use the drivers on the CD, instead i went on the website and download the drivers their for my sound card, since I figured that the ones on the CD are old. My sound seems to be working fine and great, but every time, I log on, a message pops up saying new hardware found. But I has sound and everything is installed for the sound card. I removed my old Realtek and cleaned the drivers out for a complete fresh install of the XFI sound card drivers. So my problem is that it that a "NEW HARDWARE FOUND" comes up, and in my device manager their is a question mark with an exclamation point which says multimedia audio controller. How do I fix this?

    Did you disable your onboard Realtek in the BIOS? If you just removed it from the Device Manager, it'll keep coming back.
    Also, is your X-fi working? Have proper sound?
    Dale

  • Found New Hardware Error with iTunes and Motorola L7 SLVR

    Hi,
    I reinstalled iTunes because when I connected my phone via USB I would get an error in Found New Hardware Wizard: There was a problem installing this hardware. Motorola Motorola Phone USB Device. After reinstall, I opened iTunes and no error until it asked me to 'convert my phone for use with iTunes'. Once I said yes, it did something to the phone and then the error re-occurred. I am using the latest version of iTunes.
    Shiff1

    None of the steps outlined in the referenced document resolved the problem. In addition, simply connecting the iPod to the system now has the added effect of freezing my wireless connectivity. I can still get iPod connectivity to the system, but I'm offline until I reboot again (w/o the iPod connected).
    When I try the second set of steps recommended in the attached note ("Disable conflicting System Services and Startup Items"), and had only the iPod selected, the system would not allow a complete boot up at all (kept sending me back to edit the System Services screen). It would then not allow me to restore the system to the selections that were previously on the computer. A mess!!
    I ended up doing a complete system restore (back to a prior system configuration) and that corrected the problem. But, of course, I continue to get the error when booting up that "new hardware found".
    Any other ideas?

  • "Found New Hardware" Error

    I installed the iPod on my PC and everything seems to work fine, but now everytime I turn on the system, I get a "found new hardware" error (even when the iPod is not connected). I uninstalled iTunes and then reinstalled everything again, but the problem has not gone away. Any suggestions?

    None of the steps outlined in the referenced document resolved the problem. In addition, simply connecting the iPod to the system now has the added effect of freezing my wireless connectivity. I can still get iPod connectivity to the system, but I'm offline until I reboot again (w/o the iPod connected).
    When I try the second set of steps recommended in the attached note ("Disable conflicting System Services and Startup Items"), and had only the iPod selected, the system would not allow a complete boot up at all (kept sending me back to edit the System Services screen). It would then not allow me to restore the system to the selections that were previously on the computer. A mess!!
    I ended up doing a complete system restore (back to a prior system configuration) and that corrected the problem. But, of course, I continue to get the error when booting up that "new hardware found".
    Any other ideas?

Maybe you are looking for

  • PSE 9.0 error: ".....not a valid photoshop document"

    Platform is XP Pro...camera is Canon compact digital. I downloaded photos to desktop folder. PSE allowed me to open the first 3 photos from the folder to edit, then I got the above error message. However, when I right click on the photo in the deskto

  • Rescaling a PDF document's dimensions?

    I'm wondering how complicated it would be to take an existing PDF (just a single page) and redefine its dimensions, thereby rescaling the dimensions of everything in it in one fell swoop? That is to say, if the original dimensions are 8.5 x 11 inches

  • I cannot view my yahoo email in my iPad in box

    I Deleted my yahoo email account and re-installed it. But I still do not receive emails on my iPad. I have to open my yahoo email on safari to view my yahoo email. This problem started about one week ago. Previously I received my yahoo email on my iP

  • Music coming up as "other" - file corruption

    Hello, Im one of the unfortunate people who's ipod has had a file corruption and all the music is coming up as "other". Im away from my main comp that has all my music, and using a laptop. When I first plugged it in I made a restore point just in cas

  • IPhoto 11 and PSE 11: where is the image data stored?

    I have been using iPhoto on my new macbook for the last 3 mos. It has some useful features such as quick editing,  easy sharing and making neat collages etc. However its editing capability is limited and so i just bought PSE 11 for mac. My questions: