Normal Members see Admin: Room

Hi Community,
i have a bug problem. I tried all i know.. but i cannot solve it...
I created a New Collaboration Room Template.
With Discussions / File Upload / etc... and Admin: Room... So Admins can Administrate their rooms.. But my problem is that NORMAL Member also see the menuentry Admin: Room
So i gave the Permissions so
com.sap.ip.collaboration
Everyone - Read - Enuserflag
Under TemplateAndPartContent - generic - Pages
Page: Admin: Room
I gave Everyone - Permission NONE - Enduserflag
The Workset has Everyone READ Enduserflag
So as i told you.. i set the Permission for Page: Admin: Room to Everyone and NONE
When i open now the Page IN the Workset and display the Permissions i can see that the Page Admin: Room become the permissions from the workset and there is Everyone READ
So how can i handle this that normal Members see NO ADMIN: Room ?
regards
Bjoern

Hi Bjoern,
Please check afte deleting Everyone from room admin page and assign particular user in COllaboration rooom and assign member role only. then check it if issue still persists.
If it working once for particualr user, then you can assign Everyone group to collaboration room
Hope it helps
Regards
Arun

Similar Messages

  • Creation of a normal user without admin rights

    Hi,
    I am new to oracle apex. Can you please let me know how to create a normal user without admin rights in oracle apex application.
    Thanks & Regards,
    venkat
    Edited by: 866673 on Jun 17, 2011 9:53 AM

    Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you have updated with your profile with a real handle instead of "866673".
    You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should usually include:
    <li>Full APEX version
    <li>Full DB version and edition
    <li>Web server architecture (EPG, OHS or APEX listener)
    <li>Browser(s)/version(s) used
    <li>Theme
    <li>Templates
    <li>Region type
    (although for your question only the APEX version is necessary).
    Assuming you mean a user who can authenticate to an application that uses Application Express Account Credentials?
    In APEX 4.0:
    1. Go to Home > Application Builder > [Your Application ] > Administration > Create Users and Groups > Create User
    2. Enter the User Identification information.
    3. In the Account Privileges, specify:
    User is a workspace administrator: No
    User is a developer: No
    4. Complete the rest of the form as necessary.

  • OBIEE 11g  - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.

    OBIEE 11g  - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.
    Appreciated if you could able to help as soon as possible as I don' have back up for these disappeared reports.
    Pleas let me know if any additional information needed.

    Hi
    Thank you for the reply.
    Here one thing I would need to mention that those are created by me on last week, but when I check those today, I could not able to see or even admin also not able to see those. For sure no migration and updations happend over the week end, really not able to debug whats the issue around. Unfortunately I haven't taken back up as well.
    Please could you help and let me know whats the root cause and how I could able to restore.
    Best regards,
    Kumar

  • BI PUBLISHER AND LDAP-- Can not see Admin tab

    I have setup BI Publisher with LDAP. Created all XMLP_* groups in LDAP and created user Administrator in LDAP as a member of XMLP_* groups. However, when I login to BI Publisher, I can not see Admin tab. I have reads all posts on this site, but nothing helpful. Any help... Thanks

    check this url, I think this help.
    http://oraclebizint.wordpress.com/2007/11/06/oracle-bi-publisher-and-bi-ee-invisible-admin-tab/
    thanks.

  • Internal MBP HD up as external - cant see Admin user

    Woke up to my Macbook Pro a couple weeks ago sitting in a puddle of water. Fried. Went to Apple Store and had them take out internal hard drive and bought an external case for it. They said the HD looked ok and was worth a shot.
    Today I finally found an iMac to hook it up to and after an extended wait the drive mounted and I was able to access it. Everything looks to be fine -woot- except that the Admin / Primary user account no longer shows up in the /Users/ folder (the 3 other user accounts do show up however).
    What on earth? Has anyone ever seen / heard of such a thing? I am able to get files from the drive and view everything - but no admin account (which is of course where everything I need is). Any help GREATLY applreciated.

    It's possible that the event resulted in the data loss from the drive. I suggest you see the following:
    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Is it normal to see my iPod in Explorer even when disk space is turned off?

    For a while, I was using disk space to store stuff. After buying an external and trying to move files over to it, several files were somehow corrupted, causing several problems with Windows wanting to reformat my iPod. I ended up resetting the iPod to fix that... but now I can see my iPod in Windows Explorer, even though disk space is turned off. Is that normal?

    rockmyplimsoul wrote:
    darkpontiac wrote:
    When its off, it will allow you to use your iPod while still plugged in provided its done syncing and it shouldn't disappear from iTunes unless disconnected.
    This part has bugged me since somewhere around iTunes v7.1 ... it used to be that with disk mode disabled you could auto-sync your iPod, leave it connected to iTunes, make changes to your library (e.g. new playlists, update tags) and then re-sync the iPod (right-click/re-sync). Now, once the iPod completes the auto-sync it disconnects from iTunes (but stays in the source column) and in order to re-sync the iPod after making library changes, you have to physically disconnect and re-connect it. It didn't used to be this way ...
    Actually the way it always worked for me with my older ipod I had was if i clicked sync while it was disconnected by still showing up in itunes, it would connect back and sync again and then when done go back to where its in the source list but disconnected.

  • Logged into chat, but user doesn't see the room or participants

    I am trying to help a user with iChat. He is in France and I am in US. He has a mac.com address.
    The problem is he can sign into a chat room and I can see him in that room, but he can not see the chat room window nor the participants. He will get IMs from people that are apparently in the room, but he has no idea where they are coming from.
    I can find how to hide the participant side window but unable to find any way to show/hide the chat window. iChat has not been hidden as his buddy window does show up.
    There are differences in terminology on the menu bar and drop downs between French and English so even with screen sharing, it is not easy. Menu items are under different headers.
    I have seen this before with some users, but usually a quit and reloading iChat will clear it up. There are a lot of cases of people thinking they exited a room, but their SN is still there until they quit iChat.
    If I get information, I said I would let him know a solution.

    Hi,
    EDIT:-
    I can recreate this.
    On my G4, which used to be my prime iChat computer, I have several Rooms listed in Go to Room in the File Menu
    One of these had been added to Auto Join list but not ticked.
    I did this (ticked) but no window showed.
    On the MacBook Pro I used another account/Screen Name to log in to the same room
    After finding from Snow Leopard I had an illegal character, I corrected it on both computers.
    The G4 still did not show the Room Chat window.
    However the MacBook Pro showed My G4 Screen Name as being there.
    I did find that if I went to iChat File Menu > Go to Room and Deselect the Auto Join and Quit iChat my G4 would not sign back into the room when that screen Name was logged in to AIM again at iChat Launch.
    I hope this is the same for your Buddy.
    8:39 PM Thursday; September 3, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    The G4 makes the sound as to getting a new message but the window still does not appear and the G4 therefore cannot reply. Nor can I leave the Room.

  • Unable to see conference room moderator pane.

    I have created a conference room with default access of NONE. I have added four users to the conference room (one with MANAGE access, one with WRITE access, and two with READ access). If I join the conference room as the user with the MANAGE access, I select File->Moderate and I do not see the moderator pane show up. The user that I gave MANAGE access to did not have a policy to give him moderate priviledges in Access Manager and I thought that might be the problem. So I added a policy and a rule that grants moderate priviledge and still it does not work. Since the user has the IM Regular User role and the new moderate role, are the roles conflicting? Do I even need to worry with Access Manager roles at all?

    There is a bug #4929295 , which indicates there are issues with conflicting policies .
    This was also been release noted. check the below link,
    http://docs.sun.com/app/docs/doc/819-2568/6n4rm7fhr?a=view .
    Thats the reason why your initial policies / roles did not work.
    Every time a policy / roles is changed the client doesnt pick up the policy / roles dynamically. So we need to refresh the client to pick up these policy / roles from access manager which can be done simply by re-login the client for which the changes have been made.
    vinod

  • Airport Express flashing amber, but shows normal in airport admin utility

    I just replaced a Microsoft wireless router with an Airport Extreme base station. I've had 2 airport express stations on the old wireless network working fine with solid green lights - 1 streams airtunes and the other is a print server. I installed the extreme base station and now the 2 airport express stations appear as normal / working in the airport admin utility but have flashing amber lights. the print server actually works - I can print. The airtunes streams, but it cuts out every 5-10 seconds. Can't figure out how to get rid of the flashing amber and can't find the error since the airport admin shows them as green and working normal.
    Any ideas??

    Hi ...... I am having the same problem but am having difficulties finding out why.
    How did you solve it ?
    Many thanks in advance

  • Problem to see the Room Extension

    Hi,
    I have dowload the API https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Knowledge%20Management%20and%20Collaboration%20Developers%20Guide.html "com.sap.netweaver.kmc.roomextension.zip"
    to create Room Extension. I can see as everything has upload correctly, but when i the Room Template Administration in the part Extension i don't see the Extension created.
    that I make bad?
    Thanks

    Hi Antonio,
    have you been able to solve this problem?
    Have you gone through all steps described in this tutorial?
    http://help.sap.com/saphelp_nw04s/helpdata/en/87/57934258a5ca6ae10000000a155106/frameset.htm
    Hope it helps,
    Robert

  • Web Conference - Invitations via Group Lists - Only some members see invite

    1) Start a new conference via a browser.
    2) Input invites - enter apac-ondemand-team-sg-grp
    3) Only some members of the APAC-OnDemand-Team workspace can see the conference in the list. Most cannot.
    Why can only some members of the workspace see the conference?
    We checked to ensure that those members that could not see the conference were logged in.

    Hi,
    Do we have any difference between the users ? If you as a user create the conference and can see the other members to invite them then there should not be a difference.
    Can you try inviting the users who cannot see the conference as members of the group as individuals - that way we can distinguish between group and user access issues if they can see it when invited personally but not when done as a group invite the issue may be in the group configuration.
    Phil

  • Team members see projects, sprints, code, burndown chart, but cannot see backlog items (not even the tasks assigned to them)

    I have a VS Online account (http://tec.visualstudio.com), I created it with my [email protected] ID, now I want to use it for the projects at the university I work for. My work ID is [email protected], and my jobmates use others...
    The University has the MSDN Subscription and we have assigned permissions for it.
    We can see some things in the projects but none of the users (except for the [email protected] ID) can see the baclog items and the boards...

    Hi Christian,
    Thanks for your post.
    Your Free users cannot see the Backlog items and Board pages too? Please share your screenshot(s) here.
    For licenses to users in VSO, please refer to:
    http://www.visualstudio.com/get-started/assign-licenses-to-users-vs.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is it normal to see white lines when you press the home screen while it's charging?

    Hi, I have a brand new ipad mini and I'm noticing that while I'm charging it and it's in sleep mode, if I press the home screen button whitish/grey lines will appear on the bottom of the screen for a few seconds then fade away. Is normal when charging your ipad mini?

    No it is not.
    Are you sure that this isn't a phishing attack to get your password?
    Allan

  • Is it normal to see a shadow at the bottom of the macbook air?

    My Macbook Air has a shadow that runs along the bottom of the screen. It's more noticeable when there's a white background. Is this normal on a Macbook Air?

    Only if you put them there....

  • See all room and send message

    hello, first sorry for my english.
    i' m developing a multyplayer games whith multi-rooms
    application.onAppStart = function(){
    application.player_so = SharedObject.get("player_so",
    false);
    application.nextId = 0;
    application.onConnect = function(newClient,name){
    application.nextId++
    newClient.id = application.nextId
    application.player_so.setPrope rty(newClient.name, name);
    application.acceptConnection(newClient);
    newClient.sendMessage = function(testo) { ;
    for(var c=0; c<application.clients.length;c++) { ; ;
    application.clients[c].call("sendMessage", null,"hello i'm:
    "+name);
    ok.. i have 10 rooms .. then the client
    var client_nc:NetConnection= new NetConnection();
    client_nc.connect("rtmp:/myapplication/room1","ciao");
    // i create 10 room
    client_nc.onStatus = function(info) {
    client_nc.sendMessage = function(msg) {
    dbg_txt.text +="Debug: "+ msg+"\n";
    dbg_txt.scroll += 1;
    dbg_txt.scroll = dbg_txt.maxscroll;
    mybutton.onRelease= function(){
    _root.client_nc.call("sendMessage", null,
    _root.testo_txt.text );
    how can i send a message for all client?
    if i send a message this message is received only clients of
    a determinate room, i want send message for client of all
    room

    As I said the problem is in delta pull mechanism. Talk to your Basis or EP guy and check the following link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/eb/101fa0a53244deb955f6f91929e400/content.htm
    Regards, IA

Maybe you are looking for