Not valid Explosion Date for Production Version

Hi Experts,
I am creating a production order for a new item and I am getting the following error.
version: xx
is not valid on explosion date
no other versions are available
should the document link be transfered anyway?
What is the right approach to correct this?
if I choose yes, the production order does great created,
but is it going to be a valid order?
let me know
Cheers
JD Loera

Hi,
I believe it should be a warning message, else system would not allow you to proceed, so do a re-check on that.
Coming to resolving the issue, this would occur when the valid-from date of the production version is later than the date on which bom & routing is exploded in the order. So before proceeding to make any changes, analyze the valid from dates of the BOM & Routing, now create the production version valid from that date.
This would at the very minimum ensure that the production version will be valid. If you still get a warning message, it implies that validty dates of the BOM & Routing needs a re-visit as well.
So go to MM02, MRP-4 / work scheduling view & modify the valid from dates of the production version. Once the same is done create a new order & system should read the production version.
Regards,
Vivek

Similar Messages

An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races

IDOC BOMMAT: Wrong validity-from dates for components

Hi all,
I am currently loading BOMs via IDOC BOMMAT for a data migration project. Unfortunately I am having problems to load the BOMs with the correct validity-from date for components. The data is correct when I check in LSMW, but after the load of the IDOCs the validity-from date of each component is the same as the validity date of the BOM header!
System Version is SAP 4.7.
Thanks for your help and Best Regards
H.

Has anybody any ideas?
Thanks a lot!

'Valid to' dates for both the Header & the components in the BOM report.

Hi Experts,
My Requirement:
Need to display the 'Valid to' dates for both the Header & the components in the BOM report.
Right now we are using the Functional modules 'GET_STKO' & 'GET_STPO' for the header
& the components respectively. The report gives the correct output for the all the BOM alternatives
which exist. But for the BOM alternatives which have been deleted(updated in STKO-LKENZ)
'Valid to' dates are displayed as'00/00/0000'.
(Note:ECM is used for BOMs)
Is there any Logical Database that I can fetch the 'Valid to' dates of both BOM Header & components
which are deleted?
Regards,
Mahesh

Dear Mahesh,
In my understanding I dont think you cannot get the valid to date for BOM header,unless a ECN,(engineering change number) is
used to set the deletion flag.In otherwords none of the business sets for all these BOM's the valid to date(which means the
default valid to date 31.12.9999 is taken).
Check with this FM, CS_BOM_EXPL_MAT_V2 whether can you get the valid to date for the components(infact here also the
valid from date given in the input screen impacts the report output).
Check and revert back.
Regards
Mangalraj.S

Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03

Hi Experts,
A customer wants to know if there Are any known issues with applying Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03 .
i gave him the answer that SP2 is not tested for that version hence it is not supprted. So he now asks me if Windows 2003 Server Service Pack 1 is supported for 4.0.1.0.03 , Any input would be of great help.

Hi,
Be careful when you say SP2 is not supported.
Hyperion s policy in terms of third party products was the following (I would imagine this should remain the same with Oracle, however you may want to check with your local support team):
Hyperion products are tested against the versions specified in the product matrices. They do not actively look for issues in maintenance releases or service pack upgrades from 3rd party vendors for obvious reasons (there would be far too many). They will investigate any maintenance release or service pack upgrades as long as the vendor confirms backward compatibility.
Therefore SP2 would be supported with 4.0.1 and Hyperion/Oracle should investigate any issues you may encounter.
However keep in mind that if a specific issue you have encountered in 4.0.1 is caused by SP2 but fixed in a later version then Oracle's recommendation will be to upgrade.
So its a catch 22 situation really.
Personally I would take this opportunity to recommend an upgrade to 9.3.1 ;-)
Hope this helps.
Seb

Could not read administrative data for payroll result

Hi Experts,
I am trying to extract data from ECC6.0 for datasource 0HR_PP_REC_51 and getting error:
"Personnel No. 00100062 : Could not read administrative data for payroll result HR_BIW_PP"
Can any body tell me the relevant solution for that.
Thanks in advance!
Sapna

Hi Sapna,
Please can you tell me how to fix this error, I have the same problem now.
Thanks in advance.

Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

"Print report REKORD 80 has not selected any data for correspondence SAP18"

When executed FBCJ transaction click the "print cash journal" button then appears the following message "Print report REKORD 80 has not selected any data for correspondence SAP18"
What is the procedure for to fix error?
Best regards
John

HI,
John.
please refer the following link.
correspondence type
Regards,
satish

Please put a cost object with valid JV data for GL accoutnt (line 001)

Dear All,
When the user is trying to post ASKBN, They are getting an error saying "Please put a cost object with valid JV data for GL accoutnt (line 001)"
So we tried to look up the error, and the WBS, Cost center, profit center and JVA details are all available in place. Still cant understand why this error comes. And why the system is asking to put JV details when they are available.
On checking, WBS has an AUC and AUC has the cost center which has the JV details and PC details. So I think everything is in place.
Can someone help please and let us know if we are missing anything else that needs to be checked ?
Thanks,
Hari Dharen

Dear Hari Dharen,
if something else in missung you'll get a error message if you run ASKBN in testmodus.
regards Bernhard
Edited by: Bernhard Kirchner on Oct 5, 2010 8:55 AM

Release date for JRE version 1.4.2_13

Does anyone have a scheduled release date for JRE Version 1.4.2_13? I'm in need of this patch as it fixes some Oracle Forms Client Issues.
Thanks in advance.

Hi Jason,
Can you please let me know the release date for Service Manager 4.1.
Also please guide me where can I find the functionality difference between 4.1 and 4.2
Thanks and Regards
Neha Mahanty

BAPI or FM or Standard BDC program for Production version creation (C223)

Hi All,
Is there BAPI or FM or Standard BDC program for Production version creation? Please help me.
Thanks & Regards
Santhosh

Hi,
Try this FM "CO_OCM_CREATE_PROD_VERSION"
Regards,
Smart

Oracleasm RPMs not available at OTN for Kernel version 2.6.18-155

Hi,
I have installed RHEL5.4, 64-bit. Oracleasm rpms are not present at OTN for kernel version 2.6.18-155.el5 (RHEL 5.4, 64-bit).
I am referring to the following link:
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html#oracleasm_rhel5_amd64
Please advise from where to download the packages.
Regards,
Purnima Johari

Hi!
Don't use ASMLib, it will be no longer available, it will only came in Oracle Unbreackeable Kernel for Linux 6.
I'm highly recomend you to use a newr version of Linux such as 5.5 or above.
The easly way to set the permissions on your devices is with a /etc/init.d script that do the job.
Here is an example:
#! /bin/bash
# chkconfig: 2345 25 19
# description: Set ASM Permissions on to devices at boot.
case "$1" in
start)
/bin/chown oracle:oinstall /dev/sdb1
/bin/chmod 0660 /dev/sdb1
stop)
#do nothing
status)
ls -l /dev/sdb1
echo "Usage: $0 {start|stop|status}"
exit 1
esac
exit o
You need to replace the /dev/sdb1 for your acctual partitions.
The other way to do this job y using UDEV rules (as my concern, is the finest way to do this)
pleas refear to this link on how to use udev:
http://www.oracle-base.com/articles/linux/udev-scsi-rules-configuration-in-oracle-linux-5-and-6.php#create_udev_rules_file
Hope it's helps.
Best Regards,
Julio

Valid to date for BOM Header and Item

Hello everyone,
I have been searching for "valid-to" date for BOM header and Items since several days but no luck ..
I know we can see it using transactions cs11/cs03 etc. But i wish to know the table where they are stored. As I need to extract them to BW.
Any help will be highly appreciated.
Thanks in advance!
Regards,
Anuj

Hi Anuj
In table STPO,the field AEDAT gets updated only when a change number is used,otherwise the valid to date will be shown nil here.
And also ref the link
Problem finding Valid To Date or Change number to on BOM
pavan

S_ALR_87013611 is not displaying any data for GL

Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SM

Hi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa.

BAPI/Function module for production version tab data of MRP4 view(MM01).

Hi,
I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
Thanks.
Edited by: sanu debu on May 6, 2009 3:24 PM

>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

Not valid Explosion Date for Production Version

Similar Messages

Maybe you are looking for