Notes deleted after form is rejected

I have a form that includes a Notes field to which users can append notes. After 1) a note is added, 2) the approval status is changed to "rejected," and 3) a new note is added (putting
the form back into "pending" status), the previous note disappears.
Example:
Created form
Added
note 1
Rejected request
Added note 2. After this note was saved,
note 1 disappeared.
Added note 3
Added
note 4
Rejected request
Added note 5. After this note was saved,
note 4 disappeared.
At this point only notes 2, 3, and 5 are displayed on the form. Notes 1 and 3--the ones right before the rejection--have been lost, and aren't even in the version history of the form. I tested this
with approving the request and the notes remain, so the only issue is with rejection causing the latest note to be removed.
This is frustrating because bits of past correspondence are getting erased, and can't be referred back to.

it sounds like you're losing a version when you reject a form and returning to the previous version. You should confirm this by checking the version history before rejecting a form.
Do you have a workflow on this or is it using the OOTB approval workflow?

Similar Messages

  • TPS file is not deleted after FrameMaker creates PDFs via Acrobat 8

    Using FrameMaker 7.2 build 158, and Adobe Acrobat 8, when creating PDF files, the temporary PostScript file (*.tps), which is created before the final PDF, is not deleted after the creation of the PDF is complete.
    This is a big deal for us because we are using a tool which hooks into the PDF-creation of FrameMaker/Distiller, and is reliant on this TPS file being deleted.
    Is this a known bug? Does Adobe know about this? Do any other users have workarounds for this?

    Thomas,
    FWIW, speaking from experience with the Save As route, I've seen
    random "phunnies" in the final PDFs (such as the missing fonts
    issues), a bigger .tps file than the .ps file generated from directly
    printing to file, slower throughput in both the intermediate
    postscript file creation and actual distilling (probably tied in to
    the larger .tps file) and other differences from what the joboptions
    should have been.
    There should not have been any differences in the file sizes being
    created if the same printer instance/configuration was actually being
    used. I also see this on some automated runs with Miramo. It's not
    consistent either - sometimes it works fine and then the next run, the
    process is considerably slower and there are dropouts in the PDFs.
    So far, manually printing to a ps file and distilling always seems to
    work without any issues.
    Your mileage may vary.
    Arnis

  • Safari on my iPad. I have an original iPad and since updating to the latest iOS safari forces me to restart the iPad about two to three times a day. Three problems: 1. It just blacks out. 2. The reading list does not delete after the story is read. 3. Ema

    Since updating to latest iOS safari fails several times a day.
    1. Just quits.
    2. The items on the reading list will not delete after visited.
    3. The screens goes grey when I go to email a reference.
    Is the a solution other the restarting the iPad or is this something apple ought to fix?

    See if the following help.
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Production Order reservation(ETO) not deleting after PGI (VL01N)

    Hi All,
    Greetings!!!
    A query, regarding ETO (Project system)
    ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI,  production order reservation is not deleting.
    Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
    Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
    Which requirement class and movement type I need to determine in Sales order.
    Please do needful.
    Very High,
    Thanks,
    Prasad.

    This is standard SAP
    SAP process is to deliver project stock using project delivery , where in PGI happens against the reservation created & deletes RESERVATION.
    wherein if you do PGI for order ( sale order or prod order ) , it happens against project stock ( spe stk Q - 281 movement )  i.e., against WBS element
    I faced the same for sale order delivery of project stock .
    we are selecting FINAL Issue indicator through user exit which triggers when PGI is clicked
    This will delete RESERVATION from stock overview
    hope this helps ...Let me know if you found any alternative

  • Workflow does not stop after the first reject

    Hi!
    We just got a 30-day Microsoft 365 trial at work in which we also received a Share site! I've been playing around with it a lot, especially to help them build an approval process. I believe since this is just a trial, I do not get the globally reusable Approval
    Workflow. So I tried creating a new workflow attached to a list I created.
    In this process, when the list is submitted, it needs to be approved by 2 people sequentially - John Doe & then Billy Bob.
    When I create a new workflow, I click on actions and select "Start Approval Process". After doing that, it populates Step 1 with the following line - Start Approval process on Current Item with these users. I clicked on "these users" link and added the approvers
    in sequences - John Doe, then Billy Bob.
    I saved the workflow, checked for any errors and published the workflow. While testing with this workflow, I realized that when John Doe rejects the process, the task is still assigned to Billy Bob when it is actually suppose to stop.
    How can I stop this workflow right after John Doe rejects the process?
    Any help will be appreciated!

    Hi whocareswhoiam,
    Please post your question to Office 365 forums for quick reply. Below is the link.
    http://community.office365.com/en-us/f/default.aspx
    Thanks for your understanding.
    Best regards,
    Emir

  • Reg  Order reservation not deleting after PGI (VL01N)

    Hi All,
    ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI,  production order reservation is not deleting.
    Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
    Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
    Which requirement class and movement type I need to determine in Sales order.
    With regards,
    Prasad.
    Edited by: SDGURU on Feb 9, 2011 10:50 AM
    Edited by: SDGURU on Feb 9, 2011 10:51 AM
    Edited by: SDGURU on Feb 9, 2011 11:14 AM

    Hi All,
    Please do need full.
    Regards,
    Prasad.

  • Retired applications are not deleted after 60 days

    We have several applications that are retired, all deployments are removed. According to SCCM documentation retired applications should get deleted after 60 days automaticly. It has been about 1 year since that the application is retired, but it does not
    get deleted.
    Any idea's?
    Steven Mudde

    Application is retired, deployments removed, no references. Manual deletion of the applications is not the problem, this works as it should.
    However SCCM documentation says "If an application that has no deployments is retired, it will be deleted from the Configuration Manager console after 60 days."
    http://technet.microsoft.com/en-us/library/gg682031.aspx
    This does not work
    Steven Mudde

  • Future price not deleted after cost run

    Hi all,
    If a material master has the future price maintained on the Accounting 1 view, then it is picked up in the next cost estimate that is created.
    Costing strategy is Future price, Price from PIR, Standard cost.
    However, I have been told that once the Cost estimate has been created, the future price is deleted from the material master. In this way the cost accountant can delay the release of a new standard price to avoid large re-valuations.
    The future price is not being deleted following our cost run, can anyone advise on this?
    Thanks
    Phil.

    Future prices will not delete when a cost estimate is released.  If the Future Price is ACTIVATED (no cost estimate involved) then the Future price field will clear because it is "rolled forward"  in the same manner that a Marked cost estimate is rolled forward to the Released Cost Estimate, leaving the field Future Planned Price on Costing 2 blank.
    Be very careful with CKME - it will activate future prices and release future planned cost estimates, but it does not stop and show you what is about to be activated or released and the financial impact.   We wrote a custom transaction that had CKME report what it is going to do, so we have a chance to review the infomation.

  • Notes deleted after Yosemite installation ?

    Hello everyone
    I have installed Yosemite on my Macbook Air yesterday.
    After the installation, one week of Notes are missing from the Notes app.
    I've just checked on my iPhone, it is the same, one week is missing. Same on iCloud.
    My Notes were fine just before the installation on my Macbook Air.
    Help me please!
    Thanks
    Thomas

    pandorazfruitcakeFeb 17, 2014 1:55 AM Re: Mavericks Deleted My Notes
    Re: Mavericks Deleted My Notesin response to Tazamaraz
    I was in the same boat, losing my mind because none of the suggestions were working or helpful until I stumbled onto this one.  It refers to problems encountered while upgrading to Mountain Lion but the solution worked for recovering my notes..
    https://discussions.apple.com/message/19068486#19068486
    Robin Darroch wrote:
    I had this problem - all the notes I wanted were "On My Mac", which vanished as soon as I upgraded (and weren't in the new Notes app either).  In the end, I had to find the files which Mountain Lion had failed to migrate to the new app, in the following location:
    ~/Library/Mail/V2/Mailboxes/Notes.mbox/
    There was one folder containing a whole bunch of numbered folders inside that. Going through each of the numbered folders right down to the "Messages" folder inside each, I found one or more files of the name format "nnnnn.emlx" (where "n" is a numeral).  I copied all the .emlx files I found into a single (other) directory - as a backup in case something didn't work or I needed to do it again - then selected them all and dragged and dropped them onto the Notes app.
    It's pretty poor form that the upgrade process doesn't reliably handle On My Mac notes, but at least it's not too difficult to recover.
    Hope this works for others!

  • Draft emails not deleting after sending via Mail.app

    When I compose an email a copy of that get auto saved in the Draft folder and should delete itself once I press send but that is not the case.  After I press send I can see a copy in my Sent folder AND in the Draft folder.  It only seems to happen with some emails that have attachments even with very small file sizes.
    Has anyone else had this problem and is there a fix? 
    Email is my business and I can't have unpredictable behaviour like this.  When I see the same message in my Draft and Sent folders its impossible to tell if it has actually been sent.  I have to follow up with a phone call to verify receipt.  Ridiculous!
    Here are my relevant specs:
    IMAP email service
    OSX 10.6.8
    Mail.app
    If you have a fix, thanks in advance.

    When I compose an email a copy of that get auto saved in the Draft folder and should delete itself once I press send but that is not the case.  After I press send I can see a copy in my Sent folder AND in the Draft folder.  It only seems to happen with some emails that have attachments even with very small file sizes.
    Has anyone else had this problem and is there a fix? 
    Email is my business and I can't have unpredictable behaviour like this.  When I see the same message in my Draft and Sent folders its impossible to tell if it has actually been sent.  I have to follow up with a phone call to verify receipt.  Ridiculous!
    Here are my relevant specs:
    IMAP email service
    OSX 10.6.8
    Mail.app
    If you have a fix, thanks in advance.

  • Report not updating after Form saved in Workspace in Hyperion Planning

    Whenever a form is changed in workspace and saved, it updates the form. I then go to the report to print, the report isn't showing the updated information. I have to go to Essbase to calcall for the report to be updated. How can I get my reports to update as soon as the form is saved. Thx

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • F110 - Payment order number not deleted after Feban posting

    Hello,
    I have problem regarding Payment order deletion. End user creates Bank statement (FF67) using Payment order(F110) number. Then with Feban end user posts document. Normally after Feban posting payment order number disappearing (we can see this number in tables such pyordh, reguh et c.). If we want to see Payment order number (using t-code F110) system gives such error - "No payment orders exist for this selection
    Message no. FZ084
    Diagnosis
    No payment orders exist for the selections made. This may be because the relevant account statement has already been imported".
    But in this case it is not disappeared and end user can use Payment order number second time in t-code FF67 and post in in Feban.
    Thanks and Regards,
    Sabuhi Gaflanov

    HI Carlos,
    Since you archived PO, it is stored in archive physical drive not in SAP drive.
    when u use me23n, the archived PO is picking from physical drive and it says "Already archived" message.
    I'm sure there will be no table level entries for the archived documents
    Go to SARA transaction - information system--> Archive Explorer - MM_EKKO and execute.
    Check your PO is listed here.
    So if you dont want to see your PO, then you need to De-activate information system
    in SARA-Information System-->Customizing -
    search infrastructure by Object name and use activate/deactivate icon -
    A question i really need to know - Why you want to delete a particular PO, Archival process is not a small thing and usually it takes place as a MASS activity.
    reg,
    bhg

  • Dimension members were not deleted after refresh in Planning desktop

    Hi
    A Planning application's outline was restored from backup.
    It contains some dimension members which were deleted from Planning Web some weeks before and there were made many Planning refreshes after. Full database refresh had been made in Planning desktop and these members were not removed. As refreshing is a procedure to keep metadata in correspondence such result isn't expected in my opinion.
    Is it normal behavior ?

    Hi
    i had a similar problem before. here is what i did
    add the member again.
    refresh
    delete the member
    refresh again.
    this solves the relational repositories sync issue.
    hope this helps.
    Dornakal.
    www.dornakal.blogspot.com

  • Files are not deleted after auto export

    Hi folks,
    I am using Oracle UCM 11gPS6 in Redhat Linux 5 OS.I have set automatic export based on certain docType.While setting this export,I have marked "Delete files after revisions".
    But when I automate this process,files are not getting deleted.
    Am I missing something or is this feature not available in this product?
    Any help will be appreciated.
    Regards,

    Haven't you asked the same thing in the thread Re: Setting of automatic replicator ?

  • Notes deleted after software update

    After I installed the new software all my notes were deleted. The last update was from the status with deleted notes. Any idea how I can get the notes back?

    If using the iPhone as designed, contacts are synce to a supported application on the computer or a cloud service like MobileMe or Exchange.
    Simply re-sync the contacts.

Maybe you are looking for