NOTICE OF PLANNED MAINTENANCE: 19-APR-2008

To serve you better, we are making some improvements. An outage is scheduled for Saturday, April 19, 2008 from 12:00 a.m. (midnight) to 7:00 a.m. PDT (07:00-14:00 UTC). During this time, you will not be able to access sites requiring Sun Online Account login or registration. You will be able to visit sites with features that do not require login. We apologize for the inconvenience.
Note: If you have logged in or registered this week, you will not be affected by the outage.

John,
Thank you for the correction. I am working on my stuttering problem, but sometimes it manifests itself in my finger tips, when it should not.
Maybe I have been typing too many Dutch names, like Harm Millaard, and got carried away... ?
I greatly appreciate your editing work, but have to admit that I have no $ to pay you for your efforts - sorry.
Hunt

Similar Messages

Notice of Planned Maintenance Saturday July 19 2008

To serve you better, we are making some improvements.
An outage is scheduled for Saturday, July 19, 2008 from 05:30 a.m. to 11:30 a.m. PDT
(12:30-18:30 UTC ).
During this time, you may not be able to create or update a Sun Online Account.
We apologize for the inconvenience.

Prior to this Increase Capacity for Outbound Network Calls update, my Azure websites experienced occasional connection attempt failed errors as posted
here. Since this update the errors stopped but starting on 12/30/14, these errors started up again"
"A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider. On Azure, the same web service call can result in this error or will
return a response successfully. There doesn't appear to be any pattern as to why the same call would work one time but not another.
Please review and resolve as before. Thanks.

NOTICE OF PLANNED OUTAGE:xVM Ops Center

NOTICE OF PLANNED OUTAGE:
The Sun patching and Inventory services will undergo planned maintenance this Friday (1 August 2008) from 1900 EDT to 2300 EDT.
xVM Ops Center customers may be unable to transfer to the Inventory Portal, register newly discovered gear and download patches and knowledge. They may also experience issues with their Satellites reaching Sun services during that time.
Thank you for your understanding,
Sun xVM Ops Center Team
Edited by: ForumModerator on 31-Jul-2008 19:49

I am not able to ping it.
*$ tnsping "(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/var/opt/sun/xvm/oracle/app/oracle/product/11.2.0/ocdbhome/bin/oracle)(ARGV0=oracleOCDB)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=hostXXX)(USER=oracleoc))))"*
TNS Ping Utility for Solaris: Version 11.2.0.3.0 - Production on 20-MAR-2013 22:51:10
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/var/opt/sun/xvm/oracle/app/oracle/product/11.2.0/ocdbhome/bin/oracle)(ARGV0=oracleOCDB)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=hostXXX)(USER=oracleoc))))
TNS-12560: TNS:protocol adapter error
But listener is running on port 11176. I guess this is default port for OC
*$ lsnrctl status OCLISTENER*
LSNRCTL for Solaris: Version 11.2.0.3.0 - Production on 20-MAR-2013 22:51:35
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hostXXX)(PORT=11176)))
STATUS of the LISTENER
Alias OCLISTENER
Version TNSLSNR for Solaris: Version 11.2.0.3.0 - Production
Start Date 20-MAR-2013 22:49:48
Uptime 0 days 0 hr. 1 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /var/opt/sun/xvm/oracle/app/oracle/product/11.2.0/ocdbhome/network/admin/listener.ora
Listener Log File /var/opt/sun/xvm/oracle/diag/tnslsnr/p3379-05/oclistener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostXXX)(PORT=11176)))
The listener supports no services
The command completed successfully
Those two commands do not exist on Solaris 11.

Business process 300900 is not yet planned in version 0/2008.

Hi Friends,
I am doing easy cost planning---> execution services for Internal activity allocation but when I am posting the document getting the below error.
How can I overcome this.Pointers will be rewarded.
Business process 300900 is not yet planned in version 0/2008.
Message no. BK505
Diagnosis
You did not carry out planning for business process 300900 in fiscal
    year 2008, version 0.
Because process 300900 also has no active actual price indicator, you
    cannot carry our actual allocation.
Procedure
In order to allocate to the business process in actual:
o   Carry out activity planning for the process
o   Alternatively, set the actual indicator for the process so that the
        R/3 System carries out revaluation in actual
Carry out planning and maintenance of the price indicator in the
Activity-Based Costing component.
Regards

Hi Amit,
1. Check the master data settings of process 300900 in CP02. In the "Allocation" tab. all the necessory settings are maintained such as process diriver and defalut values like cost element, actvity allocation (should be "1" i.e. manual entry in your case)
2. Maintain the planning data for this business process through CP26 for year 2008.
Regards

ECatalog for SRM - Planned Maintenance

Hi all,
Currently, I have a requirement to develop an eCatalog for Planned Maintenance (PM) Order. For each PM order, there will be list of components need to be purchased from Vendor. When user click on 'Catalog' button (toolbar below of Component tab), it will prompt up a dialog box for user to key-in Catalog ID based on Plant and Maintenance Type, and direct the user to a vendor's catalog page (Internet browser like), where user can select the desired components for maintenance usage.
Also, I notice that SAP version 4.7 only cater one Catalog as a standard, is there anyway to cater multiple catalogs instead (any BADI or user exits to achieve this)?
The major challege for this development will be:
- Multiple Catalogs
- UoM Mapping (from Vendor's UoM to SAP UoM)
- Product Category (from Vendor's Product Category to SAP Material Group)
- Log file of each transaction (for trouble-shooting purpose, so that user can identify which part of the error occurs)
I understand the above can be configured and development of BADI will be involved, however, I'm totally new to this eCatalog development. Hence, I would appreciate if someone can shed some light based on the requirement.
Many thanks.
Best regards,
Patrick

I'm able to create multiple catalog for Planned Maintenance (TCODE IW32) in R/3 (4.6c), and it has working fine.
Regards,
Patrick

Query , logical DB or report about plan maintenance and functional location

Hi,
I've to do a report about a list of plan maintenance. I've to show the functional location affected by the plans but in the table MPOS the field TPLNR doesn't exist.
But I have maintenance plans that affects to functional location only. I've not found any useful logical database or report to show this information.
Could anybody help to me?
Thanks
Best Regards

Dear
The SAP is provded the option please check once again
Table MPOS- Field ILOAN
First take the ILOAN from ILOA table by object reference is 2 (Field: OWNER) in output.
Then put the Loc/acct assignment value at input of the MPOS table which is u received from ILOA table

Printing problems: D [07/Apr/2008:13:29:03 +0200] cupsdAuthorize: No authen

Hello
I am using a Printer shared by a Windows Server. I used it successfully for a long time. But now it doesn't work anymore. May be it doesn't work anymore after I installed the updates. I am using mac os x 10.5.2 and this is the report from cupsd log (debug modus)
D [07/Apr/2008:13:29:22 +0200] cupsdReadClient: 13 POST / HTTP/1.1
D [07/Apr/2008:13:29:22 +0200] cupsdAuthorize: No authentication data provided.
D [07/Apr/2008:13:29:22 +0200] Get-Printer-Attributes ipp://localhost:631/printers/HP5Laser
D [07/Apr/2008:13:29:22 +0200] cupsdProcessIPPRequest: 13 status_code=0 (successful-ok)
When I try to print something, it always says "Hold on (Authentication required)"...
Thank you

Hello
Ty! I solved my problem with this solution:
1. sys prefs
2. print & fax
3. click add button
4. right (ctrl) click toolbar and choose Customize
5. add Advanced icon to toolbar
6. recommend removing more printers
--> Add printer (Selecting Windows)
Enter url: smb://username:password@workgroup/servername/printer
Ps: If your password contains spaces, replace them with "%20" to espace the string
cheers

Planned maintenance notifications to MEB

Good Morning Guys
I have been having problems processing planned maintenance notifications when creating revisiom and creating orders from revised revisions.
Am getting two errors
1.Task list A ENG 01: no conversion rule found for work center MA00/1000
2.Error creating order for task list 02000038 4000290 A ENG 01 in revisions
This is what i got from perfomace assistance
Task list A ENG 01: no conversion rule found for work center MA00/1000
Message no. WPSOR004
Diagnosis
The system tried to create an order for main work center MA00/1000 from task
list A ENG 01. No conversion was found for work center MA00/1000 (valid from
15.04.2014).
System Response
The system cannot convert the work center. The order creation process was
canceled.
Kind regards
hussein

Hi Hussein,
Seems like issue of validity date of Maint. Work Center . If it is, correct it in IR02. and retry.
Jogeswara Rao K

Planned Maintenance November 15 2014

Valued Customer,
We wanted to give you a heads-up on a planned maintenance window this weekend for Adobe Echosign. As part of our routine maintenance, and our ongoing work to increase the security, availability, and performance of the service, Adobe EchoSign will not be available this Saturday, November 15th, for approximately 90 minutes, starting at 9:01 PM PST. This is taking place during non-peak hours to minimize potential disruption to your business.
We apologize for any inconvenience in advance.
The Adobe EchoSign Team

I thought it was just at my end..
Yeah.. really slow...
Plus, it could not find LVOOP, which is highly unusual because it should be common.
Strange..

Nokia Software Updater planned maintenance break 1...

Dear Updaters
Nokia Software Updater planned maintenance break 12 Nov 2009, 0600 - 0700 GMT
There will be a planned maintenance break on Thursday, during which time the Nokia Software Updater service will not be available.
During the maintenance break, customers already downloading software may not be able to update successfully, but customers already updating their device will be able to complete.
We apologize for any inconvenience caused.
The Nokia Software Update team

Hi,
Will this 'maintenance' actually resolve the issues, us very unhappy 6700 owners have with updating their software. I have been trying for 3 months now to get the software updated or refreshed as I have been told to do without sucess. If you look at the posts on this site I hope it does!!!
A distraught Nokia 6700 owner.......!!!

What is actual process in plan maintenance module?

Hi Expert,
I want to know What is actual process in plan maintenance module? can u pls give me briefly description.
Regards,
Ram Rathode

Ram,
I assume you mean "Plant Maintenance" module.
"Actual Process" Is also a bit misleading. There are many distinct processes within the PM module, just as in any SAP module.
Start with online help.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/66/158661547611d182cc0000e829fbfe/frameset.htm
which is a high level description. If you want more, just coninue reading the sub-pages.
Best Regards,
DB49

"Value cannot be null" error when trying to edit or create Maintenance Plan in SQL Server 2008

I have SQL Server 2008 installed on Windows Server 2008 64bit, every time I try to open or create a new Maintenance Plan I receive the error:
Value cannot be null.
Parameter name: component (System.Design)
Program Location:
   at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.GetDesigner(IComponent component)
   at Microsoft.DataTransformationServices.VsIntegration.DtsDesignerService.OpenDesigner(String connectionString, Object connection, String objectUrn)
   at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.Invoke()
And in the Design view screen
"Microsoft SQL Server Management Studio is unable to load this document: Could not load type 'Microsoft.SqlServer.Dts.runtime.Wrapper.IDTSPackageSigning100' from assembly 'Microsoft.SqlServer.DTSRunTimeWrap, Version=10.0.0.0, Culture=neutral'.
I have searched for a possible solution and have tried some suggestions of registering the msxml6.dll but and have installed VS2008 SP1 but I'm not in a position where I can do a full reinstall of SQL Server right now. Any help is appreciated. My SQL server
environment information is below.
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Analysis Services Client Tools
2007.0100.1600.022 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.0.6002.18005 (lh_sp2rtm.090410-1830)
Microsoft MSXML 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 8.0.6001.18943
Microsoft .NET Framework 2.0.50727.4206
Operating System 6.0.6002

I digged a little deeper and figured out it was a missing directory/file in %TEMP%. Seems some CleaningTool removes all files/directories in %Temp% and after that SSMS was not working any longer. The missing file is actually not needed, but the
missing directory causes the "Value cannot be null" error.
My missing file name was:
C:\Users\<username>\AppData\Local\Temp\2\6vvdaozf.tmp
But the file name changes on every startup.
So my missing directory name was:
C:\Users\<username>\AppData\Local\Temp\2
After creating a empty directory with the name "2" in %TEMP% all went back to work fine for me.
I'm not sure the directory name is every time the same, but you can discover your missing file with the process monitor from Sysinternal Tools and filters to "Process Name is ssms.exe" and "Path contains AppData\Local\Temp"
Hope this helps other people to solve their issues too.
Thank you!! When I run %temp% it takes me to "C:\Users\Admin ...~\AppData\Local\Temp\some random number". At first the random number was 3, after I logged off and back on it was 2. My temp variable in enviromental variables is correct. I looked on another machine
running SQL2008 and temp is correct there. If I try to rename the numbered folder SSMS stops working. Any idea?

Forums Maintenance - January 15, 2008

Hello Everyone,
In my discussions with Lithium (our forum vendor) regarding
performance, they have suggested some maintenance on the forums that
could help with our community's performance.
The maintenance is to "trim" floated
threads and boards (not subscriptions) for all users in the community. This means that if
you floated a thread more than 3 months
ago, we would remove the float for you. In
long-standing communities like ours, users can build up many floats that can affect the performance of the entire
community.
In order to keep the floats that are important
to you, you just need to unfloat:
and re-float the thread because they will then be
newer than 3 months:
I must stress that there is no guarantee that this will have a noticeable benefit for performance, but Lithium has recommended that we try this because it has helped other communities in the past.
This maintenance will be performed on January 15, 2008.
Please post any questions or concerns you have to the thread on the feedback board.
Regards,
Laura
Web Support & Operations
National Instruments

Hi lacy,
Sorry that I missed your reply, I had made a bunch of posts and misplaced my subscription emails
On the feedback board, I posted about turning on tagging here. First, it was for Forum Enthusiasts and NI Employees. After we got some traction, I turned it on for all Active users (200 posts and more) which includes you.
There is also another long thread with much user discussion about tagging here. It's long, but you can see some of my posts about the benefit of tagging by looking at the messages I've tagged with "tagging".
Thanks,
Laura

Wrong user ID appearing in entered by field of planned Maintenance Orders

Hi,
Only few planned orders those are generating from maintenance plan (Having order types PM02 and PM05 for QM Inspection plan), Instead of user ID system is being taken a code in entered by field as {IP1020100416 It looks like the combination of IP10 scheduling T-code of Maintenance plan and 020100416 = 16042010 is the created on date of Maintenance order}
Please advise, what should I do to bring user ID instead of above shown code?

This is the Batch input : Group name (contains the session name). It is not specific to any user. This is helpful in listing down all the maintenance call objects that the system generated during deadline monitoring.
In the field Entered by, enter the group name that the system proposes on the initial screen of the date monitoring session.
IP1019950101 --> All maintenance orders from January 1, 1995
IP10199501 --> All maintenance orders in January 1995
This is helpful when background scheduling is activated for Maintenance Plan.
To View which User was responsible for the Scheduling of the maintenance Plans, View the Transaction IBIPA, give the user name it would list all of the Sessions run by this user and the Group Names for the correponding sessions.
Edited by: Usman Kahoot on Jun 2, 2010 10:43 AM

Planned Maintenance Saturday November 13, 3:00 pm - Sunday November 14, 1:00 am CST (November 13 21:00 - November 14 07:00 GMT)

Hello Everyone,
Just wanted to notify you about planned ni.com maintenance:
Saturday November 13, 3:00 pm - Sunday November 14, 1:00 am CST (November 13 21:00 - November 14 07:00 GMT)
ni.com will be unavailable and unreliable throughout this time period. You may be able to view the forums but may not be able to log in.
Regards,
Laura
Web Support & Operations
National Instruments

There isn't a maintenance tonight (Nov 16) is there? I'm getting some strange behavior and innability to create a new thread in the LabVIEW forum.

NOTICE OF PLANNED MAINTENANCE: 19-APR-2008

Similar Messages

Maybe you are looking for