Number range missing for characteristic 0AF_SEAN after importing request

Hii friends,
I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
Then error which i m getting is ,
Number range interval for characteristic 0AF_SEAN is missing
Error when activating InfoObject 0MATERIAL
Characteristic 0MATERIAL: Error when generating master data routines
Error when resetting InfoObject 0MATERIAL to the active version
I am waiting for ur positive reply.
Thanks & Regds,
Kavan Shah

hi Kavan,
try
transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
Error calling number range object 0MATERIAL for dimension D4 ( )
or check oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07
Transporting DataSources
hope this helps.

Similar Messages

Number range interval for characteristic 0CSTELMNTYP is missing

All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
Dave

Hi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar

ODS Activation Failure due to Number range object for characteristic ZTXLEV

Hi
I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
can anyone help me
thanks
KINDLY SEND MAIL TO [email protected]
srinivas

HI,
check this
Error calling number range object 0MATERIAL for dimension D4 ( )

Transport Error like Number Range Inteval for 0PRODID is missing

Hello
Iam transporting an infoobject to Quality and got an error like Number range interval for 0PRODID is missing.
But the infoobject which iam transporting is not the 0PRODID but is an Attribute.
can you pls let me know what to do.

Hello prasanna
Check with your Infoobject 0PRODID in Quality has got the Number range available.
If not first generate the Number range or go with the RSRV run the test with Master and do the transport

Number Range Object for a Infoobject

Hi Gurus,
Can anyone explain me what is the significance of Number Range Object for a perticular infoobject and what do you mean by Buffering of those Number Range Object...
Your help will be appreciated..
Thanks a lot in advance..
Thanks,
Shalaka.

Hai Shalaka,
The number range buffer is used to increase performance when assigning
numbers. Instead of fetching the numbers each time from the database,
a single access to the buffer suffices. Only when the buffer is empty,
is it refilled from the database (table NRIV).
Use of the buffer has the following benefits:
· Accessing the main memory is a thousand times quicker than accessing
the database. Speed is particularly important for applications that
assign numbers frequently.
· Database accesses are always subject to the database transaction
mechanism. Once an application has assigned a number for one user, a
second user cannot assign a number until the first user has executed a
commit operation on the database. The application blocks further
assignment, and the second user has to wait, until the commit has been
executed.
· The number range buffer can also prevent deadlock situations, which
may arise from assigning different numbers in a different order.
Since the SAP kernel accesses table NRIV directly for the number range
buffer, the structure of the table must never be changed. This also
applies when adding new fields.
We can set number range buffering inSNRO t code.
Loading Master data - The number ranges buffer for the SID's resides
on the application server and reduces DB server accesses. If you set
e.g. the number range buffer for one InfoObject to 500, the system
will keep 500 sequential numbers in the memory and need not access the
database.
#####>>> whenever master data loading is done system creates SIDs, &
to create SIDs system look into a specific table, check the latest
number & generate the next no in the series, so to check this latest
no for every time ( every record) system needs to go back to database
table & generate the next no in series. when I do the buffering I
provide the whole series to system at application level so it need not
to go back to table to check the latest no & generate the next one. It
just picks up the next in available on application server.
>>>####
Please refer - SAPnote 130253
Loading Transcation data - The number range buffer for the dimension
ID's resides on the application server and reduces DB server accesses.
For example, if you set the number range buffer for one dimension to
500, the system will keep 500 sequential numbers in memory and need
not access the database
If you load a significant volume of transaction data (e.g., initial
load), increase the number range buffer. If possible, reset it to its
original state after the load in order to minimize unnecessary memory
allocation
Hope this information helps u....
Asign points if helpfull
regards
KP

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
      vl_char(6) type c,
      vl_qty type INRI-QUANTITY,
      vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
    NR_RANGE_NR                   = '01'
    OBJECT                        = 'ZRG0000001'
   QUANTITY                       = '1'
SUBOBJECT                     = ' '
TOYEAR                        = '0000'
IGNORE_BUFFER                 = ' '
IMPORTING
   NUMBER                        = vl_num
   QUANTITY                      = vl_qty
   RETURNCODE                    = vl_rc
EXCEPTIONS
   INTERVAL_NOT_FOUND            = 1
   NUMBER_RANGE_NOT_INTERN       = 2
   OBJECT_NOT_FOUND              = 3
   QUANTITY_IS_0                 = 4
   QUANTITY_IS_NOT_1             = 5
   INTERVAL_OVERFLOW             = 6
   BUFFER_OVERFLOW               = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

Facing problem in Number Range Allocation for Objects in OM

Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
Tharak

Hi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu.

Maintain number range object for object J_1IINTNUM, year 2009, excise group

Hi SAP Guru !
Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
1 - >   Maintain number range object for object J_1IINTNUM, year 2009, excise group
       Message no. "4F159" .
2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
       Message no. 4F159
3 - > Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
        Message no. 4F159
Regards,
San

dear sir
while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
so please check it should be 01 in the number column and year and number range interval .
regards
jrp

I have number range issue for fi posting.

hi gurus,
i have number range issue for fi posting (fb01,fb50).
problem in updating table glpca due to duplication of record.
INSERT GLPCA FROM TABLE T_GLPCA .
With Regards,
Shakthi Raj N.

error msg after generating document no and it is not getting updated in data base
error msg
"Express document "Update was terminated" received from author "ecciabap""
Client.......   750
User.....   ECCIABAP
Transaction..   FB01
Update key...   C83B07DE4DADF13CB4950017A4AB8015
Generated....   02.03.2009, 20:37:23
Completed....   02.03.2009, 20:37:23
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

Number range object for characterstic DATE does not exist

When I am trying to load data from ODS to cube getting below error message.
"Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
In update rules we are trying to convert this date Infoobject(Char) into Key figure.
If anyone had exp with similar issue please reply.
Thanks in advance
Vani

Hi Vani,
Is ZEXTDATE Characteristic have any data in it? Can you check once.
Veerendra.

Maintain Number range group for Internal order

Hello,
I have created Internal order type, now, i would like to create/maintain the number range group for this already created order type.
When i goto Maint Number ranges for orders->click on Group->Maint and again click on group insert... when i mention here the group name and number range for that group and say save the system in accepting but when view all the groups, i do not find this new group created by me.
How do i view the newly created group, is there any other steps to be followed? please advice.
regards,
radhakrishna

Hi:
It's a little late for this post but it is still important to record.
When you try to create a group in KONK transaction, the system doesn't show the new group.
This is because there are a inconsistences in the old groups.
You must execute RSSNR0T1 program to solve the problem.
Greetings
Marco

Maintain number range object for excise grp

Hi Gurus,
During stock transfer, while doing Goods receipt I am getting the below error
"Maintain number range object for object J_1IRG23D, year 2010, excise group"
Could anyone please tell me the trans code for maintaining no range for excise group...
Thanks,
Raja

Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
Regards,
Nagesh
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

Catalog error : Index of values is missing for characteristic PLANTu0092

Error" Index of values is missing for characteristic " in mapping
Hi
We are in SRM
I was trying to transfer Master records to catalog using
BAdi : BBP_CCM_CHAR_MAINT but Im getting an error Index of values is missing for characteristic PLANT.
Plant has multiple value.
Ive following code in the method ENHANCE_CTY_DEF
ls_char_definition-char_name = 'PLANT'.
ls_char_definition-char_datatype = 'CHAR'.
ls_char_definition-MULTIVAL_INDICATOR = 'X'.
APPEND ls_char_definition TO et_char_definition.
Following code in the method VALUATE_PRODUCT
**"plant data
v_index = 1.
ls_char_valuation-char_name = 'PLANT'.
LOOP at t_plant into WA_plant.
ls_char_valuation-char_value = WA_PLANT-PLANT_1.
IF WA_plant-PLANT_1 is not initial.
   ls_char_valuation-MULTIVAL_INDEX = v_index.
   APPEND ls_char_valuation TO et_char_valuation.
   v_index = v_index + 1.
ENDIF.
ENDLOOP.
Can anyone tell me how to resolve it. Ill definitely reward points to any useful answer.
-Joe

Hi
Have you raised any OSS message with SAP yet ? If no, raise one immediately.
Meanwhile, try this ->
<u>It seems the Following code in the method VALUATE_PRODUCT
has some problem -></u>
**"plant data
v_index = 1.
ls_char_valuation-char_name = 'PLANT'.
LOOP at t_plant into WA_plant.
ls_char_valuation-char_value = WA_PLANT-PLANT_1.
IF WA_plant-PLANT_1 is not initial.
ls_char_valuation-MULTIVAL_INDEX = v_index.
APPEND ls_char_valuation TO et_char_valuation.
v_index = v_index + 1.
ENDIF.
ENDLOOP.
Try changing the code - like this ->
**"plant data
LOOP at t_plant into WA_plant.
v_index = sy-tabix.
ls_char_valuation-char_name = 'PLANT'.
ls_char_valuation-char_value = WA_PLANT-PLANT_1.
IF WA_plant-PLANT_1 is not initial.
ls_char_valuation-MULTIVAL_INDEX = v_index.
APPEND ls_char_valuation TO et_char_valuation.
ENDIF.
ENDLOOP.
Some SAP OSS notes to refer ->
<b>Note 850613 - Maintaining the BBP_CCM_CHAR_MAINT BAdI using Customizing
Note 875039 - BBP_CCM_CHAR_MAINT: Valuating predefined characteristics
Note 724097 - Search of the comp. in case of structured characteristics</b>
Do let me know.
Regards
- Atul

Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise

Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.

check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM

Number range missing for characteristic 0AF_SEAN after importing request

Similar Messages

Maybe you are looking for